Agriculture Government Departments Closing in 0 days TDR #30193997

Construction Of 6 Mt. Cool Chamber For Vegetable In Salema R.D. Block Under National Rurban Mission ( Civil Works )

Issued by Government Departments · Salema, Tripura
Tender Value
8.56 Lakhs
Estimated cost
Bid Submission
22 Dec 2021
0 days left
EMD
8569
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Salema → Tripura
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of 6 Mt. Cool Chamber For Vegetable In Salema R.D. Block Under National Rurban Mission ( Civil Works )

BOQ

Name of Work: Construction of 6 MT. Cool Chamber for vegetable in Salema R.D. Block under National Rurban Mission (Civil Works).
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil. By manual means.
2Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming andwatering, lead up to 50 m and lift up to 1.5 m.-All kinds of soil.
3Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
4Supplying chemical emulsion in sealed containers including delivery as specified Chlorpyriphos/Lindane emulsifiable concentrate of 20%
5Treatment of soil under plinth filling using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with sand filling: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
6Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level: 1:4:8 (1 Cement: 4 fine sand: 8 well brunt brick aggregate 40mm nominal size).
7Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement--All work upto plinth level: 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stoneaggregate 20 mm nominal size).finishing and reinforcement-
8Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement-In plinth and skirting courses, fillets, columns, pillars, posts and struts 1:1½:3 (1 Cement: 1½ fine sand: 3 graded stone aggregate 20 mm nominal size).
9Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement-RCC work in beams, lintels, bands, plain window sills, staircases and spiral staircases excluding precast spiral staircase. 1:1½:3 ( 1 Cement: 1½ fine sand : 3 graded stone aggregate 20 mm nominal size).
10Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to floor five level. Thermo-Mechanically Treated bars/ Cold twisted deformed steel bars.
11First class brick work in foundation and plinth including cost of all materials as required complete: - In cement mortar 1:6 (1 cement: 6 fine sand).
12First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:- In cement mortar 1:6 ( 1 cement : 6 fine sand ).
13Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ).
14Providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. complete. 40 mm thick
15Centering shuttering including strutting, propping etc and removal of form work for: Foundations, footings, bases for columns etc. for mass concrete with timber plank.
16Centering shuttering including strutting, propping etc and removal of form work for: Columns, Pillars, Piers, Abutments, Posts and Struts with shuttering ply.
17Centering shuttering including strutting, propping etc and removal of form work for: Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden ply.
18Centering shuttering including strutting, propping etc. and removal of form work for: Suspended floors, roofs, landings, balconies and access platform with 12 mm thick shuttering ply.
19Providing and fixing MS grills of required pattern in wooden frames of windows etc. with MS flats square or round bars with round headed bolts and nuts or by screws.
20Providing and fixing on wall face unplasticised Rigid PVC rain water, soil, waste & vent pipes (working pressure 4 kg / cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
2112 mm Cement plaster of mix in cement mortar 1:4 (1Cement: 4 fine Sand).
2220 mm cement plaster of mix cement mortar: 1:4 (1Cement: 4 fine Sand).
236 mm cement plaster of mix: Cement mortar 1:3 (1 cement: 3 fine sand).
2415 mm cement plaster on the rough side of single or half brick wall of mix: Cement mortar 1:4 (1 cement : 4 fine sand) sqm
25Neat cement punning.
26Finishing walls with textured exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : New work ( two or more coats applied @ 3.28 litre/10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm
27Applying priming coat [Payment shall be made after submission of Test Certificate issued by the Manufacturer] :With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works.
28Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture.
29Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. -All kinds of soil

AI Tender Summary

OUR REF NO 30193997
AUTHORITY Government Departments
TENDER VALUE 8.56 Lakhs
LAST DATE 22-12-2021
Authority
Authority Name Department Of Agriculture
Work Description Construction Of 6 Mt. Cool Chamber For Vegetable In Salema R.D. Block Under National Rurban Mission ( Civil Works )
Basic Detail
Tender No 18/EE/AGRI/N/2021-22
Bidding Type Tender
Location
City Salema
State Tripura
Key Dates
Publish Date 08 Dec 2021
Submission Date 22 Dec 2021
Open Date 22 Dec 2021
Finance
Tender Value 8.56 Lakhs
Tender Fee 1000
EMD 8569
Exemption Not Available
Document List
ffbcf12d-8c20-4bac-9c12-25de6c64c669.html
BOQ_24869.xls
DNIT.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Dec 08, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 22, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Dec 22, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

ffbcf12d-8c20-4bac-9c12-25de6c64c669.html

xls

BOQ_24869.xls

pdf

DNIT.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders