Wapcos Limited has published Establishment Of Pediatric Care Unit Hdu, Icu, Medical Gas Line Pipe Works Under Ecrp Ii At Gh Kozhikode Establishment Of Pediatric Care Unit Hdu, Icu, Medical Gas Line Pipe Works Under Ecrp Ii At Gh Kozhikode. Submission Date for this Tender is 17-12-2021. Medical Gas System Tenders in GH Kozhikode Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | 12.59.1 : Providing and fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flanged of cleat fixed to the angle hangers of 25x10x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45x15x0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27 mm high having flages of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of day wall screws of size 3.5x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes, finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture"s specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitable fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with.a.8 mm thick Calcium Silicate Board made with Calcareous& Siliceous materials reinforced with cellulose fiber manufactured through acutoclaving process. |
| 3 | 50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 4 | 13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm |
| 5 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 6 | 21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 7 | 21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness |
| 8 | 9.97.3 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mm |
| 9 | MEDICAL GAS PIPELINE WORKS |
| 10 | od174346/2021_2022 : Copper Pipe 22mm |
| 11 | od174347/2021_2022 : Copper Pipe 15 mm |
| 12 | od174363/2021_2022 : Copper Pipe 12mm |
| 13 | od174364/2021_2022 : Isolation Valve 22 mm |
| 14 | od174367/2021_2022 : Isolation Valve 15 mm |
| 15 | od174370/2021_2022 : Bed Head Pannel (1500 mm ) |
| 16 | od174372/2021_2022 : Valve Box 3 gas |
| 17 | od174374/2021_2022 : Alarm 3 gas |
| 18 | od174375/2021_2022 : Ward vaccum units |
| 19 | od174377/2021_2022 : Flow meter |
| 20 | od174378/2021_2022 : Outlets Vaccum |
| 21 | od174379/2021_2022 : Air Outlets |
| 22 | ELECTRICAL WORKS |
| 23 | 1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C |
| 24 | 1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 25 | 1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 26 | 1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 27 | 1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch |
| 28 | 1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet |
| 29 | 1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) |
| 30 | 1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). |
| 31 | 2.5.2 : Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB"s (but without MCB"s and incomer ) as required .(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)8 way (4 + 24), Double door |
| 32 | 2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 33 | 2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole |
| 34 | 2.15.3 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps |
| 35 | 2.19 : Supplying and fixing 20 amps 415volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top along with 20 amps "C" curve, TPMCB, in sheet enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 36 | 90.12.7.27 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. |
| 37 | 90.12.7.28 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. |
| 38 | 9.1.20 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X25 sq.mm (28mm) |
| 39 | 9.1.21 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 35 sq. mm (32mm) |
| 40 | od229622/2021_2022 : Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories and lamps directly on false ceiling and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copper conductor flex wire or extending the original wiring and giving connections as required<br>30X30 1X20W LED Ceiling Lamp |
| 41 | HVAC WORKS |
| 42 | od243683/2021_2022 : Supply installation Testing and commisioning of 1500 CFM cabiniet type exhaust fan with speed regulator of required static pressure along with HEPA Filter with minimum particle efficiency of 99.97% down to 0.3 microns an UV Chamber (Make: CARYAIRE) |
| 43 | od243684/2021_2022 : Supply Installation Testing and commisioning of Inline Duct Air Fan with speed regulator of required CFM and Static along with Pre-Filter,Fine-Filter & HPA Filter inside Plenum. (Make: CARYAIRE) |
| 44 | od243752/2021_2022 : Supply, installation Testing & Commisioning of sheet metal ducting work by using 24 gauge GI sheet complete with all fittings such as Tee, Bends,Turning vanes including insulation if required. (Make: TATA/JINDAL) |
| 45 | od243685/2021_2022 : SITC of Powder Coated Extruded Aluminium Supply/Return Air Grill with Horizontal fixed bars and end flanges. (Make: AIRMASTER/COSMIC/CARYAIRE) |
| 46 | od243686/2021_2022 : SITC of necessary supports for exhaust unit & ducts |
| 47 | od243687/2021_2022 : Supply Installation Testing and commisioning of Air cooled Ductable split air conditioner with following nominal capacity Fitted with scroll compressor with R410/407 refrigerant and Micro- controller Panel with all other standard accesories. (Make:HITACHI/DAIKIN |
| 48 | od243688/2021_2022 : Supply , Installation,Testing and Commisioning of Copper refrigerant piping including elbows and other necessary fittings with insulation for following machines. Make: TOTALINE/MANDEV/MEXFLOW |
| 49 | od243689/2021_2022 : AIR DISTRIBUTION SYSTEM: Supply,Installation,Testing and commisioning of GI Sheet metal ducting work complete with all fittings such as Tee,Bends,Turning vanes including suspension and supporting arrangement as required and necessary joints sealed with silicon. (Make:TATA/JINDAL<br>22 G |
| 50 | od243690/2021_2022 : Supply,Installation,Testing and commisioning of GI Sheet metal ducting work complete with all fittings such as Tee,Bends,Turning vanes including suspension and supporting arrangement as required and necessary joints sealed with silicon. (Make:TATA/JINDAL |
| 51 | od243691/2021_2022 : Supply, installation and Testing of Acoustic insulation with 10 mm thick open cell Nitrile rubber on the inner side of ducting including providing, Fixing and Finishing the same as per specifications for ducts |
| 52 | od243692/2021_2022 : Supply, installation and Testing of Thermal Insulation of ducts using 13mm thick Antimicrobial Nitrile Rubber with recommended Adhesives and sealed with black adhesive tape. (Make: ALP ARMAFLEX,KFLEX<br> |
| 53 | od243693/2021_2022 : Supply, Installation,Testing of Extruded Aluminium powder coated supply/return air grilles with horizontol fixed bars and end flanges with damper. (Make: AIRMASTER/COSMIC/CARYAIRE |
| 54 | od243694/2021_2022 : Supply,fabrication,installation,testing of flexible connections made out of fire resistant flexible double canvas sleeve |
| 55 | od243695/2021_2022 : Supply, installation,testing and commisioning Rigid PVC drain piping exposed with 9 mm Nitrile rubber insulation. |
| 56 | od243696/2021_2022 : Supply,Laying and Fixing of control wiring of suitable size required from the Indoor to outdoor units for all<br>units as per specification. |
| 57 | od243697/2021_2022 : Refrigerant gas (R 410) |
| 58 | od243698/2021_2022 : SITC of Fine-Filter inside Plenum Box |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
