|
| 1 | Procurement of spares of bottom area, dry system and wet system for use in AHP, DSTPS. |
| 2 | MS EJECTOR FEED SUMP , EQP - MS EJECTOR FEED SUMP,PART NO- 582-1-R |
| 3 | DRIVING SPROCKET 12 TEETH, EQP - 2X3 WIDE CLINKER GRINDER ASSY |
| 4 | DRIVEN SPROCKET 42 TEETH ,EQP - 2X3 WIDE CLINKER GRINDER ASSY |
| 5 | NOZZLE TIP CERAMIC LINED SS, PART NO:216-301 for HYDRO EJECTOR FOR BA HOPPER, Make-Indure |
| 6 | HOUSING,EQP - 2.5\" EQUILIZING VALVE ASSY,PART NO- 115A 02 |
| 7 | GATE ARM ,EQP - 2.5\" EQUILIZING VALVE,PART NO- 115A-03 |
| 8 | SHAFT , EQP - 2.5\" EQUILIZING VALVE,PART NO- 115A-303 |
| 9 | FOLLOWER ,EQP - 2.5\" EQUILIZING VALVE ASSY,PART NO- 115A-06 |
| 10 | CLEVIS ,EQP - 2.5\" EQUILIZING VALVE ASSY,PART NO- 115A-306 |
| 11 | PIVOT PIN ,EQP - 2.5\" EQUILIZING VALVE ASSY,PART NO- 115A-307 |
| 12 | Pivot Pin, Part No-1851-310 for 2½\" CYL. OPERATED Equalizer Valve |
| 13 | INTERMEDIATE WEAR PIECE, PART NO:216-013 for HYDRO EJECTOR FOR BA HOPPER, Make-Indure |
| 14 | WEAR PLATE, EQP - 2X3 WIDE CLINKER GRINDER ASSY,PART NO- 552-014 |
| 15 | INLET PIECE, EQP- HYDRO EJECTOR FOR BA HOPPER,PART NO- 216-010 |
| 16 | THROAT INCREASER, PART NO: 218-010 for HYDRO EJECTOR FOR BA HOPPER, Make-Indure |
| 17 | DRIVEN SPROCKET (M1) , EQP - 750 MM ROTARY FEEDER,PART NO- 199-310(1\"PITCH) |
| 18 | SPROCKET , EQP - 450 NB ROTARY FEEDER,PART NO- 199-312 |
| 19 | ROLLER CHAIN 1\"PITCH ,EQP - 450 NB ROTARY FEEDER |
| 20 | Drive Sprocket for Clarifier Bridge, Make-Triveni Engineering |
| 21 | Driven Sprocke tfor Clarifier Bridge, Make-Triveni Engineering |
| 22 | Chain for Clarifier Bridge |
| 23 | NOZZLE TIP, PART NO: EJ 44-8SS for Wetting Head, Make-Indure |
| 24 | WETTING HEAD ,EQP - FAE TOWER/DRY ASH SYSTEM,PART NO-A -248 |
| 25 | WETTING HEAD TAIL PIPE, PART NO:WHT-01 for Wetting Head, Make-Indure |
| 26 | BEARING SUPPORT, EQP - 2X3 WIDE CLINKER GRINDER ASSY,PART NO- 552-010-01 |
| 27 | FOG JET NOZZLES (1 SET OF 3 HOLDER AND SEVEN NOZZLE TIP), PART NO: A-FJ-07-04 for Air Washer, Make-Indure |
