|
| 1 | Clearing and Grubbing Road (Clearing and grubbing road land including uprooting rank Vegetating,Grass,bushes,shrubs,saplings and tree girth up to 300mm,removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materialto be used or auctioned up to a lead of 1000 metres including removal and disposal of top organick soil not exceeding 150 mm in thickness) (i) by Manual means:-(A) In area of light jungle |
| 2 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) and disposal ofexcavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design building specification and direction of E/I. |
| 3 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and lifts including cost of all materials, labours, royalty and taxes all complete as per buiding specification and direction of E/I.(Mode of measurement compacted volume) |
| 4 | P.C.C 1:3:6 infoundation (Plain Cement Concrete 1:3:6 Nominal mix in Foundation with crushed stone aggregate 40mm Nominal size Mechanically mix ,placed in Foundation and Compacted by vibreration including curing for 14 day.) |
| 5 | Plain/Rrinforced cement concrete in open Foundation complete as perDrawing and technical specifications.(PCCGrade-M15) |
| 6 | Plain/Rrinforced cement concrete in open Foundation complete as perDrawing and technical specifications.(RCCGrade-M20) Case-I using Concrete mixer |
| 7 | Plain/Rrinforced cement concrete in open Foundation complete as perDrawing and technical specifications.(PCCGrade-M15) |
| 8 | Furnishing and Placing Reinforced/Prestressed cement Concrete in Super Stucture as per Drawing Technical Specification (A) RCC Grade M20,Height up to 5m |
| 9 | Providing(tor steel) reinforcement of 8mm dia rodsas per approved design, drawing, removal cutting, bending, binding, annealed wire with cost of wire removal of rust, placing the rods in position (excluding carrage of bar to work site ) all complete job as per building specification and direction of E/I.(TMT Fe500Fe500{only valid for Tata,Tiscon,Sail,JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL) |
| 10 | (i) 8mm dia Bars |
| 11 | (ii) 10mm dia Bars |
| 12 | (iii) 12 mm dai Bars |
| 13 | (iii) 16 mm dia Bars |
| 14 | Providing shuttering including strutting proping etc. and its removal after use in foundation as per specification and direction of E/I. |
| 15 | Providing shuttering including strutting proping etc.and its removal After use invarious components of canal structures as per specification and direction of E/I. |
| 16 | Providing centering including strutting and proping etc and removal after use in deck slab as per specification and direction of E/I. |
| 17 | Supplying fitting and fixing rubber seal (water stop) of approved quality for construction joints complete job as per specification and direction of E/I. |
| 18 | Providing and fixing in position 25mm thick bituminastic board (shallitex or equivalent) as per I.S 1838-1983 in expansion or construction joints, all complete job as per specification and direction of E/I. |
| 19 | Earthwork in filling foundation trenches and back filling of structures in layer not exceeding 150mm thick well watered, rammed and fully compacted and finely dressed with suitable earth obtained from excavation of foundation trenches and placed in a suitable profile within a lead of 30M and lift of 1.5M complete job as per specification and direction of E/I. |
| 20 | Extra for Earthwork for each subsequent lift 1 m over the initial lift of 1.5 M For ordinary and hard soil (vide classification of soil item A and B). Extra for each Subsequent lift of 1M over the initial lift of 1.5 M. |
| 21 | Providing designation 75A brick work incement C.M (1:4) in super structure with approved quality of Clean Coarse sand of F.M. (2.0 to 2.5) including providing 10mm thick mortal joints, cost of Screening,materials scaffofing raking of joint to 15mm dept curing, royalty and taxes all complete as per building specification and direction of E/I. |
| 22 | Supplying, fitting & fixing fully glazed steel door, windows or ventilation of standard rolled \"Z\" and mullion steel sections and size as per IS-1038 joints met and welded with 100 x 16 x 3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15x10x10cm, size icluding cost of oxidised iron fittings, with hinges, handle per steps, catch spring, 3mm thick plain glass panes with aluminium beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storiys and taxes all complete as per building specification and direction of E/I. |
| 23 | Providing primer one coat of red lead paint of approved make over new steel surface including prepare in the surface after cleaning, removing dust, dirt, scales, smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I.(Mode of measurment Area shall be multiplied by the Co-efficient as indicated in building specification) |
| 24 | Providing primer two coats of painting with ready mixed paint of approved shade make oversteel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/I. |
| 25 | Supplying, fitting & fixing M.S. GRILL made of 20 x 6 mm flat as per approved design and drawing properly fabricated with joints continuous fitted, welded and finished smooth,Carriage of grill to work site, hoisting as per building specification and direction of E/I. |
| 26 | Providing & fixing FAN HOOK of 16 mm dia M.S. bar, 1 M long bent to required size and shape, placed in position and fixed in the R.C.C. slab-beam at the time of casting all complete as per building specification and direction of E/I. |
| 27 | Supplying, fitting and fixing callapsible gate of approved size and make properly fabricated with vertical double channels 20x10x2mm. At 100mm. Centres and braced with M.S. flat diagonals 20x3mm with top and bottom rails of T. iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. |
| 28 | Providing 12mm thick cement plaster(1:4) with clean coarse sand of F.M1.5 including screening , curing with all leads and lifts of water,scaffolging taxes and royalty with all complete as per building specification and direction of E/I. |
| 29 | Providing 6 mm. thick cement plaster (1:4) in ceiling with clean coarse sand F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 30 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface inluding preparing the plastered surface by rubbing wmooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. |
| 31 | Providing two coat of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scoffolding, curing all taxes all complete as per building specification and direction of E/I. |
| 32 | Supplying single girder hand operated circular/rectangular travelling crane with 6 m lift complete with chain pully block ISI marked and travelling trolley both tested for 50% overload including travel/circular travel and cross travel with wheel, hand chain etc complete 5 Tonne capacity above 5m to 6m span. |
| 33 | Providing and supplying in ISI mark centrifugally cast (Spun) Ductile Iron Pipes of 100mm and above all diameter for water works with socket and Spigot and confirming to IS 8329/2000 in standard working lengths of 4.5, 5.5 and 6m for classificationand K-9 suitable for push on joint (Rubber gasket) D jointing with cement mortar lining inside the pipes with outside Zinc and bituminous coating Rate are ex-factory, excluding transportation, taxes and duties Contractor profit and overhead charge etc. based on WPI 119.9 of may 2018 (including 1 no. of gasket for each pipe) Note:-(i) The above rate are ex-factory which excluding GST and CP based on WPI 119.9 of may 2018 (K-9). |
| 34 | 200 mm dia (DI) |
| 35 | 250 mm dia (DI) |
| 36 | 350 mm dia (DI) |
| 37 | 400 mm dia (DI) |
| 38 | 500 mm dia (DI) |
| 39 | 700 mm dia (DI) |
| 40 | 800 mm dia (DI) |
| 41 | Supplying labours,tools,tackles,lubricantetc.forlayingandjointing C.I.S/S tyton pipes (class LA) /D.I. pipe in trenches supplying rubber gasket (Rubber gaskets confirming to I.S.S.- 5382- 1969)andmakinggasketjointsincludingprovidingnightguard,barrierandredlighttosafeguardagainstaccident,allcomplete(Pipetobe suppllied departmenatlly freeofcostandlayingofpipesistobedoneasper I.S.S.3114-1985)as per design, specification and direction of E/I. |
| 42 | 200 mm dia (DI) |
| 43 | 250 mm dia (DI) |
| 44 | 350 mm dia (DI) |
| 45 | 400 mm dia (DI) |
| 46 | 500 mm dia (DI) |
| 47 | 700 mm dia (DI) |
| 48 | 800 mm dia (DI) |
| 49 | Earthwork in exacavation (As per IS 3114 - 1965) for laying of different types and sizes of pipes so as to give one meter average cover over the socket of pipe with disposal of excavated earth within initial lead and lift as per specification and direction of Engineer-in-charge |
| 50 | Earthwork in exacavation in canal by the hydraulic excavator as per designed section in soft rock (where blasting is not needed) (vide type of soil item-C) with disposal of spoil beyond 500 m but upto 1000 m with all lifts by tipper including construction and maintenance of haul road all complete as per specification and direction of E/I. |
| 51 | Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I (for classification for soil item A & B) |
| 52 | Providing and supplying Air Valves as per IS-14845-2000 and MJP\"s standard specifications double orifice typew combined with isolating sluice valve, mounted in horizontal position and operated by wheel gearing, small orifice elastic ball resting o n a gun metal orifice nipple, large orifice vulcanite ball scatti ng o nmoulded seat ring, inlet face and drilled, includi ng insurance,third party inspection charges, loading, unloading, transportation upto departmental store, excluding GST levied by Government of India & Governemnt of Maharashtra in all respect etc complete. |
| 53 | Air Valve Double Ball Flanged Type - PN-1.6 |
| 54 | 80 MM |
| 55 | 100 MM |
| 56 | 150MM |
| 57 | Lowering, laying and fixing in proper alignment and positionall types of C.I. air valves as directed by Engineer-in-chargeincluding cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). |
| 58 | b) Air Valve Double Ball (PN - 1.6) |
| 59 | 80 MM |
| 60 | 100 MM |
| 61 | 150MM |
| 62 | Providing double flange sluice valve (size 50mm to 1200mm) confirming for IS-2906/14846 including worn gear arrangements as per test pressure stainless steel spindle. Caps including all taxes transportation etc. complete.(excluding ContractorProfit ,GST and Overhead CHARGES) |
| 63 | With by pass arrangement PN-1 |
| 64 | 200 mm sluice valve (Rs-19272x1.1495) |
| 65 | Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (Rate for all class of valves.) |
| 66 | 200 mm sluice valve |
| 67 | Providing, fixing, supplying , lowering and laying 150mm dia TEE valve DI. Tee (Moulded) of approved make bearingISI markIncluding all necessary jointing materials such as nuts, bolts, rubber ring, double flanged GI pipe of required length or UPVC union/ flangeetc. completeas per specification and direction of E/I.(as per statement no.4 ) |
| 68 | Supplying labour and tools for laying and jointing C.I. specials in trenches including supplying lead and yarn (Pig lead confirming toISS: 782-1978 and yarn confirming to ISS : 658/-1972) and making lead caulked joints as per IS specification and direction of E/I.(C.I. specials to be supplied departmentally free of cost). |
| 69 | Providing and LayingD.I. specials of class (K-12) like branch, bends and tapers, sluice valves, air valves etc. for watersupply works suitable for push on jointing(Rubber gasket jointing) conforming to IS 9523 with cement mortar lining for inside surface and outside Zinc coating with Bituminous paint including all other taxes, insurance, carriage to work site with loading, unloading etc, stacking includinginspection chargesof DGS&D/ SGS and sales tax all complete. (Socketed) (500 mm dia K-9 pipe ) (5% of DI pipe cost) |
| 70 | 200 mm dia (DI) |
| 71 | 250 mm dia (DI) |
| 72 | 350 mm dia (DI) |
| 73 | 400 mm dia (DI) |
| 74 | 500 mm dia (DI) |
| 75 | 700 mm dia (DI) |
| 76 | 800 mm dia (DI) |
| 77 | Providing and Laying including testing Ductile Iron Double Socket Reducer conforming to IS9523/2000 having dimension as per table 21 of IS9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of IS9523/2000. |
| 78 | 800mm*700mm |
| 79 | 700mm*500mm |
| 80 | 500mm*400mm |
| 81 | 400mm*350mm |
| 82 | 350mm*250mm |
| 83 | 250mm*200mm |
| 84 | Labour only for laying including testing ductile iron double socket reducer conforming to IS9523/2000 having dimension as per table 20 of IS9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of IS9523/2000 |
| 85 | 800mm*700mm |
| 86 | 700mm*500mm |
| 87 | 500mm*400mm |
| 88 | 400mm*350mm |
| 89 | 350mm*250mm |
| 90 | 250mm*200mm |
| 91 | Supplying, fixing and commissioning C.I Scour valve (sluice valve) of approved make body and seat ring of bronze PN (Pressure numbers) 1.0 conforming to IS: 14846 of specified diameter and to withstand specified pressure with all accessories true to line and perfect linking with pipes on either side including loading, unloading, lifting and placing in position, cleaning ends, inserting gaskets into correct position, jointing pipes and valve to form water tight joint, cost of all jointing materials, machinery, labour etc. complete. (100mm dia scour valve with accessaries) |
| 92 | Providing and supplying ISI mark CI D/F reflux valves (non-return valves) offollowing dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, transportation upto epartmental stores, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete. Reflux valves as per I.S.5312 Part I (Without by pass arrangement (PN-1)) (1984) |
| 93 | 350MM |
| 94 | 500MM |
| 95 | 800MM |
| 96 | NP3 R.C.C. Hume Pipe (as per IS 458-1971) 900 mm Dia |
| 97 | NP3 R.C.C. Hume Pipe (as per IS 458-1971) 600 mm Dia |
| 98 | Labour for laying,fitting and fixing NP3 hume pipe line,level and grade as well as providing approved jointing materials and joints properly filled to make then leak proof all complete, jobas per specification and direction of E/I(hume pipe available with in lead of 40m) |
| 99 | 600 mm Dia |
| 100 | 900 mm Dia |
| 101 | Supplying and Labour charge for pitchng on apron slope of bank with stone boulder duly packed (uncreated) complete job ( materialswithin 150 m and all lifts as per specification and direction of E/I. |
| 102 | Supplying and laying good quality of stone metal Filter of size ( 20 mm to 63 mm ) in rock toe, heel trenches, toe drain as per design and drawing including the cost of materials, royalty and all taxes etc. but excluding the cost of carriage all complete as per specification and direction of E/I. |
| 103 | (i) Supplying, Installation & commissioning of HSCF Motor pumps set Motor & Accessories |
| 104 | Raw water pumping machinery: Supplying, installing & commissioning of water lubricated single/ double stage Horizontal split casing floor pump |
| 105 | 1.1 Details of HSCF Pump:- |
| 106 | (i) Make: - Kirlosker/ Jyoti. |
| 107 | (ii) Discharge capacity: -305 LPS. |
| 108 | \"(iii) Total Head: - \", 28,\" M\") |
| 109 | (iv) Head range:- |
| 110 | (v) Speed :- \", 1500,\" RPM\") |
| 111 | (vi) Maximum turbidity of water that pump should handle:- \", 5000, \" ppm.\") |
| 112 | (vii) No of stage:- Single/ double. |
| 113 | (viii) Total suspension length of column pipe:- |
| 114 | (ix) Lubrication:- Water. |
| 115 | 1.2 Materials for construction:- |
| 116 | (i) Impellor :- Bronze. |
| 117 | (ii) Impellor shaft :- Stainless steel. |
| 118 | (iii) Line drive shaft:- High tensile steel. |
| 119 | (iv) Suction strainer:- MS fabricated. |
| 120 | (v) Column pipe discharge elbow:- MS fabricated. |
| 121 | (vi) Bowl:- Fine grained Cast Iron. |
| 122 | (vii) Sluice valves & NR Valves :- ISI marked. |
| 123 | (viii) CI D/F pipe of required length delivery mainincluding necessary CI D/F specials should be provided. |
| 124 | 1.3 Details of Motor:- |
| 125 | (i) Type: - Vertical hollow/ solid shaft squirrelcage induction motor with class B insulation. |
| 126 | (ii) Make: - Kirlosker/ Jyoti/ Crompton. |
| 127 | (iii) Power Supply: - 380/ 420 Volt, 3 Phase, 50 c/s AC supply (11 KVA) |
| 128 | (iv) Speed: - \", I117, \" RPM\") |
| 129 | (v) Motor HP: - Suitable for pump 170 HP - 3 Nos. |
| 130 | 1.4 Details of Starter:- |
| 131 | (i) Type:-Oil immersed auto transformer starter. |
| 132 | (ii) Make :- MEI/ KILBURN |
| 133 | 1.5 Accessories:- |
| 134 | (i) Voltmeter: - ISI, marked 0 to 500 volt (4” dia.). |
| 135 | (ii) Ammeter: - ISI, marked 0 to 300 Amp (4” dia.). |
| 136 | (iii) Main switch: - ICTP & N - 300 Amp. 2 No. |
| 137 | (iv) Selector switch: - Standard make. |
| 138 | (v) Phase indicating neon lamp 3 no. |
| 139 | The pump should be installed on MS channel by making RCC M 20 foundation. |
| 140 | The rate includes cost of material, labour, carriage, loading, unloading commissioningall complete job. |
| 141 | Industrial type panel board with power wiring for HSCF Motor pump set complete. |
| 142 | Supplying & laying service line& power wiring 185 sq mm 3½ core Aluminum cable as per specification & direction of E/I. |
| 143 | Power wiring socketing through thumble by crimping machine. |
| 144 | Earthing of pump set complete job. |
| 145 | Installation with foundation complete -1 Job |
| 146 | A - Suction Pipe |
| 147 | SUPPLYING, INSTALLATION & COMMISSIONING OFHSCF MOTOR PUMPS SET: A - Suction Pipe--- (i) Supply 300 mm dia C.I. pipe for coloum &Delivery Pipe as per Standard Specification --- 3Nos x 15.00 M |
| 148 | (ii)Supply of 300mm C.I. flanged joint &Labour rate for fitting & fixing C.I.for 300mm C.I. pipe of 250mm dia with C.I. flamged joint. |
| 149 | (iii) Supply 300mm diaFoot Value having single leather flap and gun metal seating. |
| 150 | (iv) Supplying double flange Sluice Valve 300mm diaP N-1.6 (without byepass arrangement).(DWSD 120 C, P-40) |
| 151 | (v) Labour for fitting Sluice Valve 300 mm dia (DWSD 3.1.35, P-60) |
| 152 | B - Pumps |
| 153 | Capacity of Pump Required\"170 HP - 3 Nos. |
| 154 | Provide 170 H.P- 3 No with 2 No Run at a time |
| 155 | 170 H.P. Pump Set |
| 156 | Supplying Fully automatic star delta starer to operate induction motor working on 415v, 3 phase, 50Hz with no volt coil, over load element, on-off push buttons with necessary materials and connected to suplly ,etc complete with orginal sheet steel encloser as per IS 3914. for 150 HP Pump Sets |
| 157 | Carriage of materials at site |
| 158 | (i) Cement & Steel |
| 159 | (ii) Sand |
| 160 | (iii) Stone Chips |
| 161 | (iv) Stone Metal |
| 162 | (v) Stone Boulder |
| 163 | (vi) Bricks |
| 164 | (vii) Hume Pipe 600 mm dia |
| 165 | (viii) Hume Pipe 900 mm dia |
| 166 | Add GST @12% |
| 167 | Add Labour Cess @1% |
