|
| 1 | Executive Table Arrive:Supplying,fitting & fixing of Godrej or equivalentmake Executive Table : MAIN TOP:MDF + VENEER + PU Coating, Size :3600 W * 1080 D * 750 H, TOP THICKNESS – 90 mm.MOBILE PEDESTAL:MDF + Veneer + PU Coating ,Size :480 W X 640 D X600 H mm.ERU TOP:MDF + VENEER + PU Coating, Size : 1900 W X 480D X 550 (Not From Ground with Castors) , TOP THICKNESS – 25 mm.BACK UNIT:MDF + VENEER + PU Coating & Glass Doors,Size : 2215 W * 410D * 2000 H GLASS THICKNESS – 5 mm.PU COATING HARDNESS 1.5 H.Compleate as per proposed layout and direction of Engineer in charge. |
| 2 | Very High Back Chair:Supplying,fitting & fixing of Godrej make Very High Back Chair : The seat and back are made up of 1.2cm.thick hot pressed plywood upholstered with leather and moulded Polyurethane foam. The back foam is designed with Contoured lumber support for extra comfort.(VERY HIGH BACK) SIZE:53.0cm. (W) X 79.0cm. (H).SEAT SIZE:49.0cm. (W) X 48.0cm. (D).The polyurethane foam is moulded with density = 45+/-2kg/m3 and Hardness = 20+/-2 On Hampden machine at 25% compression.The seat and back are arrested together with a 9.0cm. (w) spine made of 0.8cm thk. HR steel. The spine is black powder-coated.The armrest assy. comprises of three parts viz. the armrest support tube and P.U. armrest and the armrest top. The armrest tube assy. is made of 2.54cm(1”) x 14 BG. M.S. E.R.W. support tubes and Chrome plated. The P.U. armrest is made of black integral skin polyurethane with 50-70 Shore `A’ Hardness and reinforced with M.S. insert.The armrest top is made of ABS & upholstered with foam & leather.The mechanism is designed with the following features:360° Revolving type.12° Seat tilt & 19° Back tilt.Front pivot for tilt with feet resting on ground ensuring more comfort.Tilt tension adjustment.5-position locking with anti-shock back mechanism, which prevents the backrest from impacting the user when the lock is released.Static seat depth adjustment = 5.0cm with 5 position locking.It has an adjustment stroke of 8.0cm.The pedestal is made of die-cast aluminium with buffing finished. It is fitted with 5nos. twin wheel castors. The pedestal is 67.0cm pitch-center dia. (77.0cm with castors).The twin wheel castors are injection moulded in 30% Glass filled black Nylon.Compleate as per proposed layout and direction of Engineer in charge. |
| 3 | Revolving Visitor Chair:Supplying,fitting & fixing of Godrej or equivalent make Visitor Chair : The seat and back are made up of 1.2cm.thick hot pressed plywood upholstered with leather and moulded Polyurethane foam. The back foam is designed with Contoured lumber support for extra comfort.SIZE:53.0cm. (W) X 79.0cm. (H).SEAT SIZE:49.0cm. (W) X 48.0cm. (D).The polyurethane foam is moulded with density = 45+/-2kg/m3 and Hardness = 20+/-2 On Hampden machine at 25% compression.The seat and back are arrested together with a 9.0cm. (w) spine made of 0.8cm thk. HR steel. The spine is black powder-coated.The armrest assy. comprises of three parts viz. the armrest support tube and P.U. armrest and the armrest top. The armrest tube assy. is made of 2.54cm(1”) x 14 BG. M.S. E.R.W. support tubes and Chrome plated. The P.U. armrest is made of black integral skin polyurethane with 50-70 Shore `A’ Hardness and reinforced with M.S. insert.The armrest top is made of ABS & upholstered with foam & leather.The seat base assy. is designed with the following features:360° Revolving type without back tilt. The fixed height assembly is revolving type.The bellow is 1-piece and blow moulded in black polypropylene.The pedestal is made of die-cast aluminium with buffing finished. It is fitted with 5nos. twin wheel castors.The pedestal is 67.0cm pitch-center dia. (77.0cm with castors).The twin wheel castors are injection moulded in 30% Glass filled black Nylon.Compleate as per proposed layout and direction of Engineer in charge. |
| 4 | Sofa Set (Three+One+One):Supplying,fitting & fixing of Godrej or equivalent make Sofa Set (3+1+1) : Frame Structure Material and size (±1 mm):18 mm teak plywood.Seat Cusion Material:foam.Type of Spring in the Base / Seating:Zig zag.Total Number of Seats in the Sofa Set (Nos):3 +1+1 seater.Frame Covering:Fully Upholstered.Covering Material for Seat and Backrest:fabric.Length of Single Seater Units in mm (±5 mm):1070 mm.Length of Three Seater Units in mm (±10 mm):1890 mm.Depth of Sofa Units in mm (±10 mm):820 mm.Sofa Height (Without Back Cushion) ±5 (mm):450 mm.Sofa Height (With Back Cushion) ±5 mm:905 mm.Seat Cusion Thickness ±5 (mm):100 mm.Compleate as per proposed layout and direction of Engineer in charge. |
| 5 | Steel Storage Unit:Supplying,fitting & fixing of Godrej or equivalent make Steel Storage Unit1200X2000: Construction:Rigid knock down construction.Material:All major Panels – 0.7 mm Thk CRCA, False Side Panel – 0.9 mm Thk, Bottom Shelf – 0.8 mm Thk CRCA Sheet. Vertical Handle sections for shutters: 1.2mm Thk CRCA sheet.Shutters:PVC Shutters.Standard internal configuration:3 Adjustable Shelves for 2000H TDU.Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum.Shutter Opening:The Double shutters operating in opposite direction (i.e. from right to left & left to right) giving full accessibility to inside without disturbing aisle.Locking Mechanism:10 lever Cam lock through lock lever.Finish:Epoxy Polyester Powder coating to thickness of 50 micron (+/- 10).Size:2000H X 1200W X 470D mm.Compleate as per proposed layout and direction of Engineer in charge. |
| 6 | Executive Table (Main Desk, Return Unit, Pedestal):Supplying,fitting & fixing of Godrej or equivalent make Executive Table (Main Desk, Return Unit, Pedestal): Main Desk: worksurface 40 mm thick (18 mm MDF batons + 4 mm natural veneer.Legs made from 1.6 mm thick MS clad with strips of MDF.Hollow construction of legs facilltates wire management.Modesty & side panel 18 mm thick MDF,pigmented black and coated with malamine.Drawer Unit constructed from 18 mm thick MDF boards has a combination of 2 box drawers + 1 filing drawer.Drawers mounted on double extension ball slides.Drawer fronts are in natural veneer coated with high gloss polyster.ERU:40 mm thick (18 mm MDF batons + 4 mm natural veneer)veneered portion of worksurface is finished in high gloss polyster & black portion of worksurface has a base coat of polyster and top coat of polyurathane.Modesty Panel 18 mm thick MDF,plgmented black and coated with melamine.Drawer unit constructed from 18 mm thick MDF boards has a combination of 2box drawers + 1 filing drawer.Drawers mounted a double extension ball slides.Drawer fronts are in natural veneer coated with high gloss polyster.Back Unit: worksurface 40 mm thick (18 mm MDF batons + 4 mm natural veneer) veneered portion of worksurface is finished in high gloss polyster & black portion of worksurface has a base coat of polyster and top coat of polyurathane.Door 23 mm thick (18 mm MDF + 4 mm veneer + 1 mm backing decorated laminate.Veneered doors coated with high gloss polyster.Pigmented doors coated with melamine.Doors are mouted on concealed hinges.18 mm thick MDF,pigmented black and coated with melamine.Towers panels 18 mm thick MDF pigmented black.Towers glass 12 mm thick float glass, edge are diamond cut pollshed.Size:Main Desk 2400 x 1104 x 735,Return UNit:1400 x 580 x 690,Back Unit:1860 x 580 x 670,Tower:1700 x 400 x 1200 mm.Compleate as per proposed layout and direction of Engineer in charge. |
| 7 | Visitor chair:Supplying,fitting & fixing of Godrej or equivalent make Visitor chair : The cushioned seat is made of injection molded plastic outer & inner.Plastic inner is upholstered with leatherette and moulded high resilience (HR) polyurethane foam of density 45±2 kg/m³,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.Seat Size: 47.0 cm. (W) x 48.0 cm. (D).The cushioned back is made of PU foam with insitu molded MS E.R.W round tube of size 1.9±0.03 cm x 0.16 ± 0.0128 cm.It upholstered with leatherette.Mid Bck Size: 47.7 cm (W) x 60.1 cm (D).The tubular frame is cantilever type & made of Ø 2.54 ± 0.03 cm x 0.2 ± 0.016 cm thk S.S 202 tube.The back connected to frame through chrome plated high pressure die cast connector piece.Compleate as per proposed layout and direction of Engineer in charge. |
| 8 | Three Seater Sofa:Supplying,fitting & fixing of Godrej or equivalent make 3 seater Sofa: Frame Structure Material and size (±1 mm):18 mm teak plywood.Seat Cusion Material:foam.Type of Spring in the Base / Seating:Zig zag.Frame Covering:Fully Upholstered.Covering Material for Seat and Backrest:Leatherite.Length of Three Seater Units in mm (±10 mm):1820 mm.Depth of Sofa Units in mm (±10 mm):830 mm.Sofa Height (Without Back Cushion) ±5 (mm):450 mm.Sofa Height (With Back Cushion) ±5 mm:865 mm.Seat Cushion Length ±5 (mm):1370 mm.Seat Cushion Width ±5 (mm):510 mm.Seat Cusion Thickness ±5 (mm):65 mm.Backrest Cushion Length ±5 (mm):1825 mm.Backrest Cushion Width ±5 (mm):508 mm.Compleate as per proposed layout and direction of Engineer in charge. |
| 9 | One Seater Sofa:Supplying,fitting & fixing of Godrej or equivalent make 1 Seater Sofa: Frame Structure Material and size (±1 mm):18 mm teak plywood.Seat Cusion Material:foam.Type of Spring in the Base / Seating:Zig zag.Frame Covering:Fully Upholstered.Covering Material for Seat and Backrest:Leatherite.Length of one Seater Units in mm (±10 mm):1010 mm.Depth of Sofa Units in mm (±10 mm):830 mm.Sofa Height (Without Back Cushion) ±5 (mm):450 mm.Sofa Height (With Back Cushion) ±5 mm:865 mm.Seat Cushion Length ±5 (mm):970 mm.Seat Cushion Width ±5 (mm):510 mm.Seat Cusion Thickness ±5 (mm):65 mm.Backrest Cushion Length ±5 (mm):1825 mm.Backrest Cushion Width ±5 (mm):508 mm.Compleate as per proposed layout and direction of Engineer in charge. |
| 10 | Centre table: Supplying,fitting & fixing of Godrej or equivalent make Centre table: Top material:Tempered glass.Frame material:Other wood.Number of storage under top:Double storage (one at upper portion and one at bottom portion).Dimension of Top (length X Breadth) ±20mm:1220 W x 594 D x 411 H mm.Height of centre table ±10 mm:410 millimeter.Thickness of top material (+/-2 mm):8 millimeter.Thickness of frame material (+/- 1 mm):18 millimeter.Number of storage under top:Double storage (one at upper portion and one at bottom portion).Thickness of top material (+/-2 mm):8 millimeter.Thickness of frame material (+/- 1 mm):Thickness of frame material (+/- 1 mm).Compleate as per proposed layout and direction of Engineer in charge. |
| 11 | Display Unit:Supplying,fitting & fixing of Godrej or equivalent make Display Unit: Cubes Pro Book Shelf Size: 1050 Wx 350 D x 2060 H mm.made with pre laminated wooden structure.Compleate as per proposed layout and direction of Engineer in charge. |
| 12 | Three Seater Sofa:Supplying,fitting & fixing of Godrej or equivalent make 3 Seater Sofa : Frame Structure Material and size (±1 mm):18 mm teak plywood.Seat Cusion Material:foam.Type of Spring in the Base / Seating:web suspension.Frame Covering:Fully Upholstered.Covering Material for Seat and Backrest:Leatherite.Length of Three Seater Units in mm (±10 mm):1750 mm.Depth of Sofa Units in mm (±10 mm):850 mm.Sofa Height (Without Back Cushion) ±5 (mm):400 mm.Sofa Height (With Back Cushion) ±5 mm:765 mm.Seat Cushion Length ±5 (mm):1580 mm.Seat Cushion Width ±5 (mm):495 mm.Seat Cusion Thickness ±5 (mm):100 mm.Backrest Cushion Length ±5 (mm):1755 mm.Backrest Cushion Width ±5 (mm):335 mm.Compleate as per proposed layout and direction of Engineer in charge. |
| 13 | One Seater Sofa:Supplying,fitting & fixing of Godrej or equivalent make 1 Seater Sofa : Frame Structure Material and size (±1 mm):18 mm teak plywood.Seat Cusion Material:foam.Type of Spring in the Base / Seating:web suspension.Frame Covering:Fully Upholstered.Covering Material for Seat and Backrest:Leatherite.Length of Single Seater Units in mm (±5 mm):850 mm.Depth of Sofa Units in mm (±10 mm):850 mm.Sofa Height (Without Back Cushion) ±5 (mm):400 mm.Sofa Height (With Back Cushion) ±5 mm:750 mm.Seat Cushion Length ±5 (mm):450 mm.Seat Cushion Width ±5 (mm):510 mm.Seat Cusion Thickness ±5 (mm):100 mm.Backrest Cushion Length ±5 (mm):895 mm.Backrest Cushion Width ±5 (mm):740 mm.Type of Sofa and Backrest:Seat and Backrest are permanently fixed with the frame Structure.Compleate as per proposed layout and direction of Engineer in charge. |
| 14 | Centre Table:Supplying,fitting & fixing of Godrej or equivalent make Centre Table : Top material:Medium Density Fiberboard.Frame material:Other wood.Dimension of Top (length X Breadth) ±20mm:1200 W x 600 D x 380 H mm.Height of centre table ±10 mm:380 mm.Thickness of top material (+/-2 mm):18 mm.Thickness of frame material (+/- 1 mm):36 mm.Storage material:Medium Density Fiberboard.Shoes Material:Nylon.Shape of the Centre table:Rectangular.Style of Centre Table:Supported by set of Legs.Design of centre table:With four legs only.Thickness of leg material:35mm X 35mm.Compleate as per proposed layout and direction of Engineer in charge. |
| 15 | Corner Table:Supplying,fitting & fixing of Godrej or equivalent make Corner Table : Top material:Medium Density Fiberboard.Frame material:Other wood.Dimension of Top (length X Breadth) ±20mm:530 W x 450 D x 450 H mm.Height of centre table ±10 mm:460 mm.Thickness of top material (+/-2 mm):18 mm.Thickness of frame material (+/- 1 mm):19 mm.Shape of the Centre table:Rectangular.Style of Centre Table:Supported by set of Legs.Design of centre table:With four legs only.Connecting of leg:Adjacent side of leg.Number of buffers:Four number at bottom.Compleate as per proposed layout and direction of Engineer in charge. |
| 16 | Thirty Seven Seater Conference Table:Supplying,fitting & fixing of Godrej or equivalent make 37 Seater Conference Table (\"U\"-Shape) : Work Surface: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above.Understructure:It consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Aluminium alloy 63400 - WP profile is used for connecting panels together. The product has a knock-down construction.Modesty Panel:Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns).Wire Management:An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio,video cables onto worktop and connect devices charger to power socket below worktop.Size:1800 MM Head Module,2 Seater 1350 x 600 x 750 mm.Compleate as per proposed layout and direction of Engineer in charge. |
| 17 | Twenty Two Seater Conference Table:Supplying,fitting & fixing of Godrej or equivalent make 22 Seater Conference Table (\"U\"-Shape): Work Surface: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Plastic ABS access flap is provided for easy access to wires and cables. Work top is available in various shapes as shown above.Understructure:It consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Aluminium alloy 63400 - WP profile is used for connecting panels together. The product has a knock-down construction.Modesty Panel:Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Powder coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS 513,epoxy polyester powder coated (DFT 40-60 microns).Wire Management:An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pull out audio,video cables onto worktop and connect devices charger to power socket below worktop.Size:1800 MM Head Module,2 Seater 1350 x 600 x 750 mm.Compleate as per proposed layout and direction of Engineer in charge. |
| 18 | High back chair:Supplying,fitting & fixing of Godrej or equivalent make High back chair : The seat is made up of 1.2 ± 0.1 cm thk. Hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18.The back is made up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yarn.Seat size: 47.0 cm (W) x 49.5 cm (D).Back size: 45.0 cm (W) x 65.3 cm (H).The HR polyurethane foam is moulded with density = 55 +/- 2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression.The armrests have an UP-Down adjustment of 8.5 ± 0.5 cm which is provided in armrest structure.Armrest top has an integrated layer of thermoplastic elastomer (TPE).The lumber support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric.The height of lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad.Lumbar pad has an adjustment of 8.0 ± 0.5 cm in height.The adjustable tilting mechanism is designed with the following features.360° revolving type.Single point control.Front-pivot for tilt with feel resting on ground ensuring more comfort.Tilt tension adjustment.4-position locking with anti-shock feature.Seat/back tilting ratio of 1:2.The neckrest assembly consist of polypropylene pad with moulded polyurethane foam & covered with polyester fabric.Neckrest is fixed to back assembly through neckrest connector.Neckrest assembly has height adjustment of 4.2 ± 0.5 cm and rotation adjustment of overall 76° ± 2°.The complete neckrest assembly is retro fit to the main chair.The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.The pedestal is injection moulded in black 30% glass-filled nylon and fitted with 5 nos. twin wheel castors.The pedestal pitch-center dia is Ø 66.1 ± 0.5 cm.The twin wheel castors are injection moulded in black nylon.Compleate as per proposed layout and direction of Engineer in charge. |
| 19 | Mid back chair:Supplying,fitting & fixing of Godrej or equivalent make Mid back chair : The seat is made up of 1.2 ± 0.1 cm thk. Hot pressed plywood measured as per QA method described in OCP-QLTA-PL14-18.The back is made up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yarn.Seat size: 47.0 cm (W) x 49.5 cm (D).Back size: 45.0 cm (W) x 65.3 cm (H).The HR polyurethane foam is moulded with density = 55 +/- 2 kg/m³ and hardness 16 ± 2 kgf as per IS:7888 for 25% compression.The armrests have an UP-Down adjustment of 8.5 ± 0.5 cm which is provided in armrest structure.Armrest top has an integrated layer of thermoplastic elastomer (TPE).The lumber support consists of polypropylene pad with moulded polyurethane foam & covered with polyester fabric.The height of lumbar pad can be adjusted through two projecting knobs provided on the rear side of the pad.Lumbar pad has an adjustment of 8.0 ± 0.5 cm in height.The adjustable tilting mechanism is designed with the following features.360° revolving type.Single point control.Front-pivot for tilt with feel resting on ground ensuring more comfort.Tilt tension adjustment.4-position locking with anti-shock feature.Seat/back tilting ratio of 1:2.The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.The pedestal is injection moulded in black 30% glass-filled nylon and fitted with 5 nos. twin wheel castors.The pedestal pitch-center dia is Ø 66.1 ± 0.5 cm.The twin wheel castors are injection moulded in black nylon.Compleate as per proposed layout and direction of Engineer in charge. |
| 20 | Executive table (main desk,ERU & pedestal):Supplying,fitting & fixing of Godrej or equivalent make Executive table (main desk,ERU & pedestal) : MAIN TOP:MDF + VENEER + PU Coating, Size :1800 W * 900 D * 750 H.TOP THICKNESS – 65 mm.MODESTY:Size : 1640 X 600 X16 MM , MDF + Veneer + PU Coating.MOBILE PEDESTAL:MDF + Veneer + PU Coating , Size : 510W * 635H * 445D mm.ERU TOP:MDF + VENEER + PU Coating, Size : 1200 W x 445 D x 660 H.TOP THICKNESS – 25 mm.PU COATING HARDNESS 1.5 H.BACK UNIT:MDF + VENEER + PU Coating & Glass Doors,Size : 2215 W * 410D * 2000 H GLASS THICKNESS – 5 mm.PU COATING HARDNESS 1.5 H.Compleate as per proposed layout and direction of Engineer in charge. |
| 21 | Executive High back chair:Supplying,fitting & fixing of Godrej or equivalent make Executive High back chair : The seat / back are made up of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam together with moulded seat and back covers. The back foam is designed with contoured lumbar support for extra comfort. The chair is available in four models.BACK SIZE:50.0cm. (W) X 72.0cm. (H).SEAT SIZE: 50.0cm. (W) X 46.0cm. (D).The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression.The seat cover is injection moulded in black co-polymer polypropylene and back cover is vacuum formed from ABS sheets.The one-piece armrests made of black integral skin polyurethane with 50-70 Shore ‘A’ Hardness and reinforced with M.S. insert. The armrests are scratch and weather resistant. The armrests are fitted to the seat with seat/armrest connecting strip assembly made of 0.5cm. thk. HR steel.The center pivot mechanism is designed with the following features: 3600 revolving type.17° maximum tilt on pivot at center.Tilt tension adjustment.Upright locking.The pneumatic height adjustment has an adjustment stroke of 10.0 cm.The bellow is 3 piece telescopic type and injection moulded in black Polypropylene.The pedestal is made of HR steel and fitted with 5 nos. twin wheel castors (castor wheel dia. 5.0cm.). The pedestal is covered with a P.P moulded cladding for modern and aesthetic looks. The pedestal is 65.0 cm. pitch-center dia. (75.0 cm with castors).The twin wheel castors are injection moulded in 30% Glass Filled black Nylon.Compleate as per proposed layout and direction of Engineer in charge. |
| 22 | Visitor chair:Supplying,fitting & fixing of Godrej or equivalent make Visitor chair : The seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE:47.5 cm. (W) x 58.0 cm. (H).SEAT SIZE : 47.0 cm. (W) x 48.0 cm. (D).The Polyurethane foam is moulded with density = 45±2 kg/m³ and Hardness = 20±2 at 25% compression. The one-piece armrests are injection moulded from black Co-polymer Polypropylene.The powder coated tubular frame is cantilever type & made of dia 25.4mm x 2mm thk M.S. ER.W. Tube.Compleate as per proposed layout and direction of Engineer in charge. |
| 23 | Displaystorage:Supplying,fitting & fixing of Godrej or equivalent make Displaystorage : Construction & Material:Rigid Knock down construction.Prime Quality CRCA Steel – 0.8 mm Thick.Sliding Door Arrangement:Full height Sliding Door with top hanging arrangement to prevent derailment.Each door provided with 2 Plastic roller having steel ball bearing for smooth movement of door & less noise.VSDU have Glass door for visibility of the content.Locking & handle :Snap on type aesthetically appealing die cast 5 Lever Cam lock for safe locking.Plastic flush & recessed handle.Shelving :Height wise Adjustable Shelf Mounting.Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum & for half shelf it is 40 Kg.4 Nos. of Adjustable Full Shelf.Top option:1 mm for Metal Top.Accessory:Craddle with pipes for hanging Godrej Instadex files.Leveler:Screw type leveler with hex plastic base (add in unit height min.8 mm & additional 5 mm max for adjustment).Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10).Size:1830 x 900 x 450 (GLASSDOORFullHt.) mm.Compleate as per proposed layout and direction of Engineer in charge. |
| 24 | Reception Table:Supplying,fitting & fixing of Godrej or equivalent make Reception Table : Rubberwood Top:Clean matt PU finish 18 mm thick.Inside radius 700.0 mm.Outside radius 1350 mm.Depth 200 mm.Cork:Rubber sed cork - 18 mm thick.Glass:Frosted glass 10 mm thick diamond cut finshing on edges inside radius-1202.5 mm thick.Outside radius-1402.5 mm.Depth-200 mm.Modesty Panel:MS perforated sheet.Below worksurface 0.8 mm(Thk.) x 66.5 mm(H) x 130.6 mm (FL).Above worksurface 0.8 mm (Thk.) x 260 mm (H)x 130.6 mm (FL).Legs:MS tube 1.6 mm thick.Dia - 50.8 mm.Height - 604 mm.Compleate as per proposed layout and direction of Engineer in charge. |
| 25 | Modular workstation:Supplying,fitting & fixing ofGodrej or equivalentmake recta modular workstation : The panel thk. 52 mm, Pnl.Ht. 1200 mm (Approx). Tile configuration for all panels, above worktop : Combination of fabric magnatic board with white board on worktop side, rest of all metal tile will be below the worktop level, There will be raceway below the worktop provition for mounting switches. The Worktop will be 25 mm plelaminated partical board with PVC lipping, dim of 1200 mm WX600 mm D X 750 mm H. 3 dr. Mobile Pedestal,CPU Trolley & Keyboard Pull Out Trey.Complete as per proposed layout and direction of Engineer in charge. |
| 26 | Workstation chair:Supplying,fitting & fixing ofGodrej or equivalent make Workstation chair : The seat and back are made up of 1.2 cm. thick hot pressed plywood upholstered with fabric and moulded Polyurethane foam together with seat and back covers. The back foam is designed with contoured lumbar support for extra comfort.SEAT SIZE:45.0cm. (W) X 42.0cm. (D).BACK SIZE:39.0cm. (W) X 47.0cm. (H).The seat and back covers are injection moulded in black Co-polymer Polypropylene.The polyurethane foam is moulded with density = 45 +/-2 kg/m³ and Hardness = 20 +/- 2 on Hampden machine at 25% compression.The one-piece armrests are injection moulded from black Nylon. The armrests are fitted to the seat with armrest connecting brackets made of 0.5cm. thk. HR steel.The permanent contact mechanism is designed with the following features:360° revolving type.14° maximum back-tilt only.Tilt tension adjustment.The pneumatic height adjustment has an adjustment stroke of 12.5 cm.The bellow is 3 piece telescopic type and injection moulded in black Polypropylene.The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors (castor wheel dia. 5.0cm.). The pedestal is 54.0 cm. pitch-centre dia. (64.0 cm with castors).The twin wheel castors are injection moulded in 30% Glass Filled black Nylon.Complete as per proposed layout and direction of Engineer in charge. |
| 27 | Steel Storage:Supplying,fitting & fixing ofGodrej or equivalent make Steel Storage : Size:Plain (4S) - 916 mm (W) x 486 mm (D) x 1981 mm (H),Construction & Material:Welded construction.0.8 mm thk CRCA for Back, Shelf & 0.9 mm thk CRCA for all other components.Configuration (Door):Full height Steel Hinged Door.Locking & handle :Mazak Handle.3 way locking mechanism with shooting bolt arrangement.Shelving :Height wise Adjustable Shelf Mounting.Uniformly Distributed Load Capacity per each full shelf is 80 Kg maximum.Plain 4S : 4 Nos. of Adjustable Full Shelves.Leveler:M10 Screw type leveler with hex plastic base.Finish:Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10).Size:1981H x 916W x 486D mm.Complete as per proposed layout and direction of Engineer in charge. |
| 28 | Three Seater Visitor Seating Chair:Supplying,fitting & fixing ofGodrej or equivalent make 3 SeaterVisitor Seating Chair : The Premium Lounge chair is a flexing-back lounge seating system standing on beam with side frame assemblies.The side frame assembly is fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It is made of a MS. E.R.W. tube dia. 3.81cm. (1 1/2”) x 14 BG. thk. and black powder coated. The ends are fitted with ABS moulded end caps.It is the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members are used to connect the side frames. The tie-member is made of MS. E.R.W. tube dia.3.81cm. (1 1/2”) x 14 BG. thk.and black powder coated. The seat/back assemblies are mounted on one of the tie-member which has 5cm x 5.5cm long x 0.5cm. thk MS. Std. angles welded to mount the seat and back.The seat rest assembly consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/- 2 Kg./cm³. The hardness of the P.U. foam = 23 - 27 Kgs. on Hampden m/c. for 25% compression of the foam. The complete moulded seat rest assembly is covered with a replaceable fabric upholstery cover.SEAT SIZE:52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T)for one seat.The backrest assembly is flexing type and consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/- 2 Kg./cm³. The hardness of the P.U. foam = 16 - 20 Kgs. on Hampden m/c. for 25% compression of the foam. The complete moulded backrest assembly is covered with a replaceable fabric upholstery cover.BACK SIZE:52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T) for one back.The adj. glide is injection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take care or unleveled floor surface.Complete as per proposed layout and direction of Engineer in charge. |
| 29 | One Seater Visitor Seating Chair:Supplying,fitting & fixing ofGodrej or equivalent make 1 Seater Visitor Seating Chair : The Premium Lounge chair is a flexing-back lounge seating system standing on beam with side frame assemblies.The side frame assembly is fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It is made of a MS. E.R.W. tube dia. 3.81cm. (1 1/2”) x 14 BG. thk. and black powder coated. The ends are fitted with ABS moulded end caps.It is the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members are used to connect the side frames. The tie-member is made of MS. E.R.W. tube dia.3.81cm. (1 1/2”) x 14 BG. thk.and black powder coated. The seat/back assemblies are mounted on one of the tie-member which has 5cm x 5.5cm long x 0.5cm. thk MS. Std. angles welded to mount the seat and back.The seat rest assembly consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/- 2 Kg./cm³. The hardness of the P.U. foam = 23 - 27 Kgs. on Hampden m/c. for 25% compression of the foam. The complete moulded seat rest assembly is covered with a replaceable fabric upholstery cover.SEAT SIZE:52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T)for one seat.The backrest assembly is flexing type and consists of a fabricated inner-frame assembly insitu-moulded with Polyurethane foam having density = 45 +/- 2 Kg./cm³. The hardness of the P.U. foam = 16 - 20 Kgs. on Hampden m/c. for 25% compression of the foam. The complete moulded backrest assembly is covered with a replaceable fabric upholstery cover.BACK SIZE:52.0cm. (W) X 59.0cm. (H) X 6.0cm. (T) for one back.The adj. glide is injection moulded in black Nylon & fitted to the front end of side frame assembly along with ABS moulded adj. Glide base to take care or unleveled floor surface.Complete as per proposed layout and direction of Engineer in charge. |
| 30 | Auditorium chair:Supplying,fitting & fixing ofGodrej or equivalent make Auditorium chair : MS black powder coated understructure with integrated, auto tip-up mechanism.Footprint area of base plate: 150mm X 230mm X 5mm thick.Backrest supporting beam width: 460mm (L) X 80 X 40 – 14 BG HR tube.Understructure fixed to ground by foundation expansion bolts M10 X 100 with washer and nut.Seat assembly is made of Polyurethane foam moulded with 1.5 cm. thick plywood insert as per the following dimensions:Seat size:Depth: 420.0 mm (D).Width @ rear: 440.0 mm.Width @ front: 410.0 mm.Effective seat width (W): 460.0 MM.Effective seat depth (D): 450.0 MM.Back assembly consists of Polyurethane foam moulded with MS tubular frame insert. The insert is composed of Diameter 19mm x 16BG MS tubular frame with flexible nylon support straps running across the length and width of the frame.Back size:Height: 540.0 mm (H).Width @ top: 340.0 mm.Width @ seat level: 460.0 mm.The polyurethane foam used for seat and back is moulded with density = 45+ 2 kg/c.m.Vacuum formed plastic back & Mech. cover with 3mm. and 2mm. respectively avg. thickness.Armrest understructure is upholstered PU foam moulded with MS insert and Arm tops are made of seasoned wood.Armrest width = 70mm and are offered as common / individual armrest between chairs.Option of PU Arm tops also available.Complete as per proposed layout and direction of Engineer in charge. |
| 31 | Stage chair:Supplying,fitting & fixing ofGodrej or equivalent make Stage chair: The seat and back are made up of 1.2 cm thick hot pressed plywood, upholstered with fabric and moulded Polyurethane foam with PVC lipping all around. The back foam is designed with contoured lumbar support for extra comfort. The chair is available in four models.BACK SIZE:49.0cm.(W) x 71.0cm.(H).SEAT SIZE:49.0cm.(W) x 44.0cm.(D).The polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression.The one-piece armrests made of black integral skin polyurethane with 50-70 Shore ‘A’ Hardness and reinforced with M.S. insert. The armrests are scratch and weather resistant. The armrests are fitted to the seat with seat/armrest connecting strip assembly made of 0.5cm. thk. HR steel.The center pivot mechanism is designed with the following features:3600 revolving type.17° maximum tilt on pivot at center.Tilt tension adjustment.Upright locking.The pneumatic height adjustment has an adjustment stroke of 12.5 cm.The bellow is 3 piece telescopic type and injection moulded in black Polypropylene.The pedestal is made of HR steel and fitted with 5 nos. twinwheel castors (castor wheel dia. 5.0cm.).The pedestal is covered with a P.P moulded cladding for modern and aesthetic looks. The pedestal is 65.0 cm. pitch-centre dia.(75.0 cm with castors).The twin wheel castors are injection moulded in 30% Glass Filled black Nylon.Complete as per proposed layout and direction of Engineer in charge. |
