|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. All kind of soil. |
| 2 | Supplying and filling in plinth, under floor, foundations etc wiith sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering grading to required slope, ramming consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level. 1:3:6(1 cement : 3 fine sand : 6 graded well burnt brick aggregate 20 mm nominal size). |
| 4 | First class brick work in foundation and plinth including cost of all materials as required complete. In cement mortar 1:4 (1 cement : 4 fine sand). |
| 5 | Half brick masonry work with first class brick in foundation and plinth including cost of all materials as required complete. In cement mortar 1:4 (1 cement : 4 fine sand). |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement: 1:1 1/2 : 3 (1 cement : 1 1/2 fine sand: 3 graded stone aggregate 20 mm nominal size). |
| 7 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto floor five level. Thermo - Mechanically Treated bars / Cold twisted deformed steel bars. |
| 8 | 12 mm cement plaster of Mix: In cement mortar 1:4 (1 cement : 4 fine sand). |
| 9 | 12 mm cement plaster of Mix: In cement mortar 1:4 (1 cement : 4 fine sand). Neat cement punning. |
| 10 | Centering shuttering including struttings, propping etc and removal of form work for: Lintels, beams, plinth beams, girders, bressumers and cantilevers with shuttering ply. |
| 11 | Centering shuttering including struttings, propping etc and removal of form work for: Suspended floors, landings, balconies and access platform with timber planks. |
| 12 | Supply and installation of pre-painted Galvalums sheets for roofing / classing (size shape and pitch of corrugation as approved by Engineer IN Charge) in 550 mpa steel grade, made out of cold Rolled steel coated with Zinc- Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% silicon confirming to ASTM A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side, sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer In Charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 x 55 mm) with EPDM washers filled with white lead complete upto any pitch in horizontal / vertical or curved surface excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thickness. |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to given an even shade (Payment shall be made after submission of Test Certificate issued by the manufacture) Two or more coats on new work over an under coat of suitable shade with ordinary paint (primer) of approved brand and manufacture. |
| 14 | Finishing walls premium acrylic smooth exterior paint with silicon additives of required shade of approved brand and manufactures (Payment shall be made after submission of Test Certificate issued by the Manufacturer): New work (two or more coats applied @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 2.20 Kg / 10 sqm). |
| 15 | Providing structural steel work riveted, bolted or welded in built up sections, truses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required. |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering: All work upto plinth level: 1:2:4 (1 cement : 2 fine sand : 4 graed stone aggregate 20 mm nominal size). |
| 17 | Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc complete. Hot finished welded type tubes. |
| 18 | Providing and fixing chequered terrazo tiles 22 mm thick with graded marble chips of size upto 6 mm, laid on floors, footpath and courtyard on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigments to match the shade of tiles including rubbing and polishing complete. Light shade pigment using white cement. |
| 19 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m. All kind of soil. |
