Rural Works Department has published tender for special repair of Sogarto Baruan Road under MMSY for the year 2021-22. Submission Date for this Tender is 17-12-2021. Road Work Tenders in Kamakhyanagar Odisha. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Dec-2021 | 1st Corrigendum | Date | 17-12-2021 |
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201 of MoRD by manual means of MORD by manual means etc. complete as per direction of the Engineer-in-Charge |
| 2 | Construction of embankment with approved materials deposited at site from road way cutting and excavation from drain & foundation of other strutures graded & compacted to meet the requirement of Tables 300.1 & 300.2 as per clause no.301of MORD specification for Rural roads and as per direction of Engineer-In-Charge. |
| 3 | Construction of embankment with approved material obtained from borrow pit with lift up to 1.5 m transporting to sites, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 as perClause 301.5 of MoRD specification for rural roads & as per direction of the Engineer-in-Charge. |
| 4 | Fine dressing and turfing including transportation by mechanical means with all leads and lifts and placing of turfs in position and ramming with thapies including watering and cost of labour and all materials etc. complete as per the direction of the Engineer-in-Charge. |
| 5 | Providing and applying primer coat with bitumen Emulsion [SS-1] on prepared surface of Granular base including cleaning of road surface & spraying primer @ 0.70kg/ 1.0 kg/sqm using mechanical means as perclause 502 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per direction of Engineer-in charge. |
| 6 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 of MoRD & as per direction of Engineer-in-Charge. |
| 7 | Providin & laying Bituminous Macadam with hot mix plant using crushed aggregates of specified grading premixed with bituminous binder of 60/70 penetration grade of bitumen, transported to site, laid over previously prepared surface with hydrostatic paver finisher with sensore control to the required grade, level & alingment & roling with smooth wheeled,vibratory & tandem rollers to achieve the desire compaction as per clause 504 of MoSRT&HSpecifications for road and bridge works (4th Revision) Page-169 Item-45 |
| 8 | Providin & laying Semi Dense Bituminous Concret with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to site, laying with a hydrostatic paver finisher with sensore control to the required grade, level & alingment,roling with smooth wheeled,vibratory & tandem rollers to achieve the desire compaction as per clause 508 of MoSRT&HSpecifications for road and bridge works (4th Revision)Page-175 item - 47 |
| 9 | Construction ofshoulder with approved materials like Moorum obtained from locality with all lift and leads transporting to site, spreading, grading to required slope andcompacting to meet requirement of table-300.2 with all lead and lifts as per Technical Specification Clause 303.1 |
| 10 | Construction of un-reinforced, dowel jointed plain cement concrete pavement over a prepared sub-base with 43 grade cement @ 400kg per cum, coarse and fine aggregate conforming to IS:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures, as approved, curing compound, finishing to lines and grades as per drawing and as per clause 602 of MOSRT&H Specifications for Road & Bridges work (4th Revision). |
| 11 | Earthwork in excavationfor foundation of structures in all types of soil as per drawing and technical specification Clause 305 and 1104 of MoRD includding setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto all lead & lift, dressing of sides and bottom and back filling with excavated suitablematerial upto 3mt.as per direction of Engineer-in-Charge. |
| 12 | Filling sand-Supplying & filling good clean river sand of approved quality including watering to complete saturation & ramming complete with all leads & lifts including cost, conveyance, royalty & taxes of all materials & cost of all labour & T&P required for the worketc. complete as per specification & direction of Engineer in charge. |
| 13 | Cement concrete (1:3:6) in foundation & plinth with 4cm. crusher broken hard granite broken metal of approved quality from approved quarry including hoisting lowering & laying in layers not exceeding 150mm. thick with proper packing & ramming each layer of concrete by means of vibrator including curing, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance royality & taxes of all material required for the work including supplying & working pumps, T&P articles finishing the exposed surface smooth as per specific ation & direction of the Engineer-in Charge providing groove & beads where necessary complete in all respects. |
| 14 | Cement concrete (1:2.5:5) M-15 in foundation & plinth using with 12MMcrusher broken hard granite broken chips of approved quality from approved quarry including hoisting lowering & laying in layers not exceeding 150mm. thick with proper packing & ramming each layer of concrete by means of vibrator including curing, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance royality & taxes of all material required for the work including supplying & working pumps, T&P articles finishing the exposed surface smooth as per specific ation & direction of the Engineer-in Charge providing groove & beads where necessary complete in all respects. |
| 15 | Cement concrete (1:2.5:5) M-15 in substructure using with 12MMcrusher broken hard granite broken chips of approved quality from approved quarry including hoisting lowering & laying in layers not exceeding 150mm. thick with proper packing & ramming each layer of concrete by means of vibrator including curing, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance royality & taxes of all material required for the work including supplying & working pumps, T&P articles finishing the exposed surface smooth as per specific ation & direction of the Engineer-in Charge providing groove & beads where necessary complete in all respects. |
| 16 | & form works finishing the exposed surface smooth providing beads & grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads & lifts, cost of all labour T&P & machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer-in-Charge but excluding cost, conveyance of tor steel & binding wire & labour charges for straightening, cutting, bending, binding welding & tying the grills lapping spacing etc. where ever necessary & hoisting & placing in position ( to be paid separately as required for RCC works) |
| 17 | Supply of HYSD bars confirming to grade S-415 cutting bending, binding, lapping, splicing, welding etc. (conforming to ISI specification) & jointing if necessary by lapping & tying the grills & placing in position as required for RCC works as per the approved design, hoisting, lowering & laying position including cost & conveyance oftor steel & binding wires of 18 to 20 gauge(as to be approved by the Deptt.) etc. complete (weight of binding wire shall not be considered for payment at all which will be borne by the contractor (standard CO-efficient of different sizes of the steel shall be considered & welding & lapping should confirm to relevant clause of IRC-21/1987) |
| 18 | Providing Weep Holes is Brick Masonry/Paln/Rainforced concrete abutment, wing wall / return wall with 100mm dia AC pipe, extending through the full width of the structure wirh slope of IV:2Htowards drawing force etc, complete. |
| 19 | Providing and fixing typical MMSY informatory sign board with Logoas per MoRD specification and drawing.Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5mm size on back edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm . The angle iron frame of lower most plate and flat iron frame of middle of middle plate will be welded to 2 Nos. 75mm x 75mm x of 12 SWG sheet tubes posts duly embeded in cement concrete M--15 grade blocks of 450mm x 450mm x 600mm ,600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S will be stove enamelled on both sides.Lettering and printing arrows, boarder etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1of MoRD and as per direction of Engineer-incharge |
| 20 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work as per direction of the Engineer-in-Charge. |
| 21 | i)600mm equilateral triangle |
| 22 | ii)600mm Circular |
| 23 | Supplying and installing of reinforced cement concrete M 15 grade Kilometer stone/ local stone of standarddesign as per IRC : 8fixing in positionincluding painting,and printing etc. as per clause 1703 of MORD specification for Rural roads and as per direction of Engineer-in-charge. |
| 24 | 5th Kilometer stone (Precast) |
| 25 | Ordinary kilometer stone(Precast) |
| 26 | 200 m Stone(Precast) |
| 27 | Reinforced cement concreteM-15 grade Guard stone / local stone of standard design as per IRC-25 fixed position including finishingas per clause 1704 of MORD.and as per direction of the Engineer-in-charge. |
| 28 | Providing and fixing of typical Citizens information boardas per MORD specifications and drawing. Three MS Plates of 50 X 5 cm thick, backplate duly welded with 75mm dia steel tubes back on edges as per drawings.The lower & upper plate will be welded with MS flat iron frame of 50mm x 5mm. The steel tubes duly embeded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm below ground level.All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as perClause 1701 and Annexure 1700.1 of MORD Specification for Rural roads including ,conveyance, royalty, taxes, labour and T&P required for the work and as per direction of Engineer-in-charge. |
| 29 | Thermoplastic Paint Centre |
| 30 | TBM Pillar |
| 31 | Reference Pillar |
| 32 | Part-II (Maintenance) |
| 33 | Restoration of rain cuts with soil, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawings and MORD technical specifications Clause 1902 by manual meansas per direction of the Engineer in charge |
| 34 | 1st Year |
| 35 | 2nd Year |
| 36 | 3rd Year |
| 37 | 4th Year |
| 38 | 5th Year |
| 39 | Making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 mas per MORD technical specification Clause 1903as per direction of the Engineer in charge. |
| 40 | 1st Year |
| 41 | 2nd Year |
| 42 | 3rd Year |
| 43 | 4th Year |
| 44 | 5th Year |
| 45 | Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawings and Technical Specification Clause 1903. |
| 46 | 1st Year |
| 47 | 2nd Year |
| 48 | 3rd Year |
| 49 | 4th Year |
| 50 | 5th Year |
| 51 | Repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre-mix carpet and seal coat type C as per MORD technical specificationClause 503,508,510,1904as per direction of the Engineer in charge. |
| 52 | 1st Year |
| 53 | 2nd Year |
| 54 | 3rd Year |
| 55 | 4th Year |
| 56 | 5th Year |
| 57 | Cutting of branches of treesfrom the road way or with in R.O.Wincluding disposal of wood and leaves to suitable location as per technical specification Clause 1914 of MORDas per direction of the Engineer in charge. |
| 58 | 1st Year |
| 59 | 2nd Year |
| 60 | 3rd Year |
| 61 | 4th Year |
| 62 | 5th Year |
| 63 | Cutting of shurbfrom the road way or with in R.O.Wincluding disposal of wood and leaves to suitable location as per technical specification Clause 1914 of MORDas per direction of the Engineer in charge. |
| 64 | 1st Year |
| 65 | 2nd Year |
| 66 | 3rd Year |
| 67 | 4th Year |
| 68 | 5th Year |
| 69 | Triming of grass and weeds from the shoulder/berms and disposal the same to suitable location as per technical specification Clause 1914 of MORDas per direction of the Engineer in charge |
| 70 | 1st Year |
| 71 | 2nd Year |
| 72 | 3rd Year |
| 73 | 4th Year |
| 74 | 5th Year |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
