Bids Are Invited For Senior Executive Table - Providing And Placing Of Senior Executive Table Of Size 2400X1050x750 Mmmade Out Of 19 Mm Thickwater Proof Commercial Block Board With 3.5 Mm Thick Teak Veneer Of Approved Quality And Colour On All Exposed Sur, Delhi-Delhi

Bids Are Invited For Senior Executive Table - Providing And Placing Of Senior Executive Table Of Size 2400X1050x750 Mmmade Out Of 19 Mm Thickwater Proof Commercial Block Board With 3.5 Mm Thick Teak Veneer Of Approved Quality And Colour On All Exposed Surface . Wherever 38 Mm Thick Commercial Board Is Required, It Shall Be , By Joining Two 19 Mm Thick Boards. Edges Of Board To Be Covered Withsecond Class Teak Wood Lipping Of 4 Mm Thick And Moulding Of 25Mm Thick In Second Class Teak Wood On The Edges Of Table Top , 3 Nos Of Drawers Running On Softclose Qudro Channel Of Supreme Quality And Required Size. Alldrawers To Have Locking Arrangement And Handles Of Approved Quality And Design. Foot Rest Of Second Class Teak Wood Of Size 65 X 30 Mm. All Exposed Faces ( Inside / Outside ) To Be Finished With Melamine Polish With Two Or More Coats Etc. Complete. Executive Table Provided With 2400X1050 Mm 12 Mm Thick Glass On Table Top With Bavelled And Polished Edges As Per Aproved Sample . , Executive High Back Chair - Supply And Placing Of Executive High Back Chair. The Seat And Back Are Made Up Of 1.2Cm.Thick Hot Pressed Plywood And Upholstered With Leather And Moulded Polyurethane Foam.High Back Size: 53.0Cm. ( W ) X 95.4Cm. ( H ) Seat Size: 54.6Cm. ( W ) X 49.0Cm. ( D ) The Chair Has360 Degree Revolving Type , Front Pivot Synchro Tilt Mechanism, 5Position Locking With Anti-Shock Back Mechanism.The Hr Polyurethane Foam Is Moulded Withdensity=45+ / -2 Kg / M Cube And Hardness Load 16+ / -2 Kgfas Per Is:7888 For25%Compression. The Seat Andback Are Arrested Together With A 9.0Cm.. ( W ) Spine Madeof 0.8Cmthk. Hr Steel.Thearmrest Tube Assy.Is Made Of 2.54Cmx0.16Cm M.S.E.R.W.Support Tu Be Sand Chrome Plated.The Armrest Top Is Made Of Abs &Upholstered With Foam & Leather. The Pedestal Is Madeof Die-Cast Aluminium With Buffing Finished.It Is Fittedwith 5Nos.Twin Wheel Castors.The Pedestal Is 67.0Cm Pitch-Center Dia ( 77.0 Cm With Castor ) .The Twin Wheel Castors Are Injection Moulded In Black Nylon. Colors Available : Black Synthetick Leather, Camel Brown Synthetick Leather All Complete As Per Drawings And As Directed By The Engineer-In-Charge. , Three Seater Sofa - Supplying And Placing In Position 3 Seater Sofa .The Seat Is Made Of Pu ?Foam With Density ?28?± ?2 Kg? / ?Cu?.?Mtr Having An ?Additional Top Layer Of Super Soft. ?Pu Foam Indensity ?32 ?± ?2 ?Kg? / ?Cu?.?Upholstered With Fabric ?Or Leatherette?. ? ?The Back Is ?Made Of Pu Foam With ?Density ?28 ?± ?2 ?Kg? / ?Cu?. Mtr With Two Additional ?Top Layer Of Supersoft ? Foam Of Density ?32?±?2 ?Kg? / ?Cu?. ?Mtr?, ?Upholstered ? With Fabric Or Leatherette . ?Understructure Is Made ?Up Of ?1?.?2?±?0?.?1 ?Cm?. ?Thick ?Hot Pressed Plywood ? ( Moisture Resistance & Termite Proof As Per Is: 303 ) & Pinewood Of Cross Section Devoid Of Major Knots & Surface Defects 6 Nos. Per Seat & 3.8 Mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose.?It Is ?A Welded Assembly ?Made In Stainless Steel ? ( ?Grade Ss ?202? ) ?Tube ?& ?Plate? With Plastic Endcap. ( W ) 206.0* ( D ) 90.5 ( H ) 85.5 Cmseat ( H ) 45.0 Cm. As Per Approved Sample. , Two Seater Sofa - Supplying And Placing In Position Two Seater Sofa. The Seat Is Made Of Pu ?Foam With Density ?28?± ?2 ?Kg? / ?Cu?.?Mtr Having An ?Additional Top Layer Of Super Soft ?Pu Foam Indensity ?32 ?± ?2 ?Kg? / ?Cu?.?Upholstered With Fabric ?Or Leatherette?. ? ?The Back Is ?Made Of Pu Foam With ?Density ?28 ?± ?2 ?Kg? / ?Cu?. Mtr With Two Additional ?Top Layer Of Supersoft ? Foam Of Density ?32?±?2 ?Kg? / ?Cu?. ?Mtr?, ?Upholstered ? With Fabric Or Leatherette . ?Understructure Is Made ?Up Of ?1?.?2?±?0?.?1 ?Cm?. ?Thick ?Hot Pressed Plywood ? ( Moisture Resistance & Termite Proof As Per Is: 303 ) & Pinewood Of Cross Section Devoid Of Major Knots & Surface Defects 6 Nos. Per Seat & 3.8 Mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose . ?It Is ?A Welded Assembly ?Made In Stainless Steel ? ( ?Grade Ss ?202? ) ?Tube ?& ?Plate? With Plastic Endcap. 1.35.0Cm , 92.0Cm, 82.0Cm, 45.0Cm ( Sh ) . As Per Approved Sample. , Centre Table - Supplying And Placing In Position Centre Table Offollowing Sizes Made Out Of Second Class Teak Wood Frame, Side With 70 X 25 Mm Teak Wood And 45 X 45 Mm Teak Wood Decorative Legs As Per Approved Design, Including 20 X 20 Mm Teak Wood Moulding All Exposed Surfaces To Be Finished With Melamine Polish With Two Or More Coats Of Size 900 X 900 X 400 Mm With 8Mm Thick Bevelled Edge Glass Top.As Per Approved Sample. , Mid Back Chair - Supply And Placing In Position, Midback Chair.The Seat & Back Are Made Up Of 12Mm Thick Hotpressedplywood, Upholsteredwithfabric&Mouldedwithpolyurethanefoamtogetherwithmouldedabsseatandback Covers. The Back Foam Should Designed With Contoured Lumbar Support For Extra Comfort. Mid Back Size 475 Mm Width X580 Mm Height And Seat Size 470 Mm Width X480 Mm. The Polyurethane Foam Should Be Moulded With Density45 Kg / M3 And Hardness 16 + / 2 Kg On Hampdem Machine At 25% Compression. Armrest Are Injection Moulded From Black Copolymer Polypropylene. The Mechanism Should Be Fixed 360 Degree Revolving Type, Upright Position Locking, Tilt Tension Adjustment, Seat Back Tilting Ratio 1:3. The Pneumatic Height Adjustment Has An Adjustment Stroke Of 12 Cm. The Pedestal Should Be Injection Moulded Inblack 33% Glass Filled In Nylon 66 With 5 Nos Twin Wheel Castors. The Pedestal Should Be 66.3 Cm Pitch-Center Dia. As Per Approved Sample. , Discussion Table - Supply And Placingof Discussion Table Of Shape And Design Round For 04 Persons Of Size 1200 X 1200 Mm Made Out Of Teak Wood And Top With 19Mm Commercial Board With 3.5 Mm Thick Teak Veneer Of Approved Quality And Colour On All Exposed Surface And Edges Cover With 30 X 20 Mm Thick Second Class Teak Wood Beading, Center Leg With 300 Mm Wide And 04 Nos Support To Top With 50 X 30 Mm Thick Second Class Teak Woodall Complete With Two Or More Coats Of Melamine Polish On All Exposed ( Inside-Outside ) Surfaces In Approved Colour And Sample Complete As Insructed By Engineer-In-Charge As Per Approved Sample. , Discussion Table For 06 Persons - Supplying And Placing In Position Discussion Table Of Shape And Design Round For 06 Persons Of Size 1800 X 900 Mm Made Out Of Teak Wood And Top With 19Mm Commercial Board With 3.5 Mm Thick Teak Veneer Of Approved Quality And Colour On All Exposed Surface And Edges Cover With 30 X 20 Mm Thick Second Class Teak Wood Beading, Under Structureofsize400 X 1200 Mm Wide And 04 Nos Support To Top With 50 X 30 Mm Thick Second Class Teak Woodall Complete With Two Or More Coats Of Melamine Polish On All Exposed ( Inside-Outside ) Surfaces In Approved Colour And Sample Complete As Insructed By Engineer-In-Charge As Per Approved Sample. , Side Rack - Supplying And Placing In Position Side Rackof Size 900X450x750 Mm Made Out Of 19 Mm Thickwater Proof Commercial Block Board Covered With 3.5 Mm Thick Teak Veneer Of Approved Quality And Colour On All Exposed Surfaceedges Of Board To Be Covered Withsecond Teak Wood Class Lipping Of 4 Mm Thick.Key Board Of Size 525 X 400 Mmand Bottom Portion To Have Space For C.P.U. Drawer With Telescopic Channel Of Supreme Quality And Required Size And Open Shelf With 3 Nos Of Drawers. Back To Have 6 Mm Commercial Ply With Holes , And Plugged With Pvc Hole Cover For Wiring , All Exposed Faces ( Inside / Outside ) To Be Finished With Melamine Polish With Two Or More Coats Etc. Complete Side Rackof Size 1050X525x750 Mm With 12 Mm Thick Glass On Table Top With Bavelled And Polished Edges As Per Aproved Sample . , Centre Table Sctw - Supplying And Placing In Position Centre Table Offollowing Sizes Made Out Of Second Class Teak Wood Frame, Side With 70 X 25 Mm Teak Wood And 45 X 45 Mm Teak Wood Decorative Legs As Per Approved Design, Including 20 X 20 Mm Teak Wood Moulding All Exposed Surfaces To Be Finished With Melamine Polish With Two Or More Coats Of Size 600 X600 X 400 Mm With 8Mm Thick Bevelled Edge Glass Top. As Per Approved Sample. , Executive Table - Providingandplacingof Executivetableofsize1800x900x750mmmadeoutof19mmthick Waterproof Commercialblockboardwith3.5Mmthickteakveneerofapprovedqualityandcolouronallexposedsurface. Wherever 38 Mm Thick Commercial Board Is Required, It Shall Be , By Joining Two 19 Mm Thick Boards. Edges Of Board To Be Covered Withsecond Class Teak Wood Lipping Of 4 Mm Thickand Moulding Of 25Mm Thick In Second Class Teak Woodontheedgesoftabletop, 3Nosofdrawersrunningons.S.Telescopicchannelofsupremequalityand Requiredsize.All Drawerstohavelockingarrangementandhandlesofapprovedqualityanddesign.Footrestof Second Class Teak Wood Of Size 65 X 30 Mm. All Exposed Faces ( Inside / Outside ) To Be Finished With Melamine Polish With Two Or More Coats Etc. Complete .Tableof Size 1800 X9000 X 750 Mm With 12 Mm Thickglasson Tabletop With Bavelledand Polishededgesas Per Aproved Sample . , Steel Almirah Large - Supplying And Placing In Positionstandard Steel Almirah Large Of Size 1980X910x480 Mmwith 4 Nos Shelves Making 5 Compartment.Body And Shelves Fabricated From22 Gauge Thick Crc Ms Plane Sheet &Doors With 20 Gauge Thick Crcms Plane Sheet. Shutters Shall Be 02 Nos. With Locking Arrangments Of Approvedmake Godrej / Harrisonincluding Duplicate Key. Handle Should Be 100Mm Long Chromium Plated Steel. All Surface Of Almirah Shall Be Powder Coated Of Approvedcolours / Shades All As Per Engineer-In-Charge. As Per Approved Sample. , Executive Revolving Chair - Supplying And Placing In Positionexecutiverevolving And Tilting High Back Chair Of Size 560 X 590 X 1100 Mm, Having Seat And Back Made Of Moulded Pu Foam 50 Mm Thick And Black Copolymer On Outer Cover. The Arm Rest Shall Be Made Of Steel Inserted Black Polyproplene For Superior Comfert, Chest Shall Have Gas Liftmechanism And Shall Be Supported On Steel Inserted Nylon Base With 5 Castorspedestal Of Approved Quality .The Frame Shall Beupholstered With Leatherete Of Approved Quality And Colour All Complete As Per Direction Of Engineer-In- Charge. As Per Approved Sample.. , Single Seater Sofa - Supplying And Placing In Position Single Seater Sofa. The Seat Is Made Of Pu ?Foam With Density ?28?± ?2 ?Kg? / ?Cu?.?Mtr Having An ?Additional Top Layer Of Super Soft ?Pu Foam Indensity ?32 ?± ?2 ?Kg? / ?Cu?.?Upholstered With Fabric ?Or Leatherette?. ? ?The Back Is ?Made Of Pu Foam With ?Density ?28 ?± ?2 ?Kg? / ?Cu?. Mtr With Two Additional ?Top Layer Of Supersoft ? Foam Of Density ?32?±?2 ?Kg? / ?Cu?. ?Mtr?, ?Upholstered ? With Fabric Or Leatherette . ?Understructure Is Made ?Up Of ?1?.?2?±?0?.?1 ?Cm?. ?Thick ?Hot Pressed Plywood ? ( Moisture Resistance & Termite Proof As Per Is: 303 ) & Pinewood Of Cross Section Devoid Of Major Knots & Surface Defects 6 Nos. Per Seat & 3.8 Mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose . ?It Is ?A Welded Assembly ?Made In Stainless Steel ? ( ?Grade Ss ?202? ) ?Tube ?& ?Plate? With Plastic Endcap.86.0Cm , 92.0Cm, 82.0Cm, 45.0Cm ( Sh ) . As Per Approved Sample. , Conference Table For 25 Persons - Supply And Placingof Designee’S Type Conference Table For 25 Persons Having Minimum Size For 1 Person Should Not Be Less Then 750 ( W ) X 600 ( D ) X 750 ( H ) Mm As Perfollowing Inclusion.Under Structure ( Base ) Under Structure Of Size Per Person 750Mm X 525Mm X 715Mm Made Out Of 18 Mm Commercial Block Board Board Having Both Side Same 1Mm Thicklaminate Of Matching Shade Of Top Or Approved Colourall Four Sides To Have 4Mm Thick Teak Wood Lipping. Back Provided With Dual Raseway For Carrying Electric Data Cables Etc All Complete.As Per Approved Sample.Ultra High Gloss Tri Coloured Top Work Of Rose Burl. Minimum Size For 1 Person Should Not Be Less Then 750X600 X 750Mm Top Edge To Have 100Mm Wide 2 Nos Strip Of 19Mm Thick Cbb + 19Mm Thick Cbb Top Edge Thickness Should Be 63Mm ( 19Cbb + 19Cbb + 19Cbb + 3.5Mm Veneer + 2.5Mm Polyester Polish ) Edges Covered With 25 Mm Thick Black Coloured Mdf Board. Ultra High Gloss Finish Have To Be Achieved By Applying 7 Or More Coated Of Ultra High Gloss Polyester Before Multi Coat Of Uhgp Surface Of Top To Be Have Prepared By Applying Stainer, Filling Of Pores & Open Veins, Cutting & Grinding And Applying 3 Or More Coats Of Epoxy After Complete Process Of Polishing, Epoxy & Polyester Coat It Should Be Measuring 2 To 2.5 Mm Thick Layer Of Polish Final Finish Should Be Ultra High Gloss & Scratch Resistancewax And Rubbing Of Make 3M Shall Be Used For Buffing. Shall Be Done With Nylon Buff And Machine Etc All Complete. As Per Approved Sample. , Conference Table For 15 Persons - Supplying And Placing In Position Designee’S Type Conference Table For 15 Persons Having Minimum Size For 1 Person Should Not Be Less Then 750 ( W ) X 600 ( D ) X 750 ( H ) Mm As Perfollowing Inclusion.Under Structure ( Base ) Under Structure Of Size Per Person 750 ( W ) X 600 ( D ) X 715 ( H ) Mm Made Out Of 18 Mm Commercial Block Board Board Having Both Side Same 1Mm Thicklaminate Of Matching Shade Of Top Or Approved Colourall Four Sides To Have 4Mm Thick Teak Wood Lipping. Back Provided With Dual Raseway For Carrying Electric Data Cables Etc All Complete.As Per Approved Sample.Ultra High Gloss Tri Coloured Top Work Of Rose Burl. Minimum Size For 1 Person Should Not Be Less Then 750X600 X 750Mm Top Edge To Have 100Mm Wide 2 Nos Strip Of 19Mm Thick Cbb + 19Mm Thick Cbb Top Edge Thickness Should Be 63Mm ( 19Cbb + 19Cbb + 19Cbb + 3.5Mm Veneer + 2.5Mm Polyester Polish ) Edges Covered With 25 Mm Thick Black Coloured Mdf Board. Ultra High Gloss Finish Have To Be Achieved By Applying 7 Or More Coated Of Ultra High Gloss Polyester Before Multi Coat Of Uhgp Surface Of Top To Be Have Prepared By Applying Stainer, Filling Of Pores & Open Veins, Cutting & Grinding And Applying 3 Or More Coats Of Epoxy After Complete Process Of Polishing, Epoxy & Polyester Coat It Should Be Measuring 2 To 2.5 Mm Thick Layer Of Polish Final Finish Should Be Ultra High Gloss & Scratch Resistancewax And Rubbing Of Make 3M Or Equivlant Shall Be Used For Buffing. Shall Be Done With Nylon Buff And Machine Etc All Complete. As Per Approved Sample. , Steel Almirah Medium - Supplying And Placing In Position Steel Almirah Medium : Supply Of Steel Almirah Medium Of Size 1270 X 760 X 430 Mmwith 3 Nos Shelves, Body Fabricated From 20 Guage Thick Crc Msplain Sheet On Top, Bottom & Doors And 22 Gauge Thick Crc Msplain Sheet On Sides, Back & Shelves.Shutter Shall Be 02 Nos With Locking Arrangement Of Approved Makegodrej / Harrison Or Equilent Including Duplicate Key.Handle Should Be 100 Mm Long Chromium Plated Steel. All Surface Of Almirah Shall Be Powder Coated Of Approved Colours / Shade Etc Completeas Per Approved Sample. , Dining Table For 4 Persons - Supply And Placing Of Dining Table For 4 Person Of Size 1200X900x750mm Made Out Of Teak Wood Frame ( Side Rail 90X30mm & Legs 70X70mm ) Top 19Mm Commercial Board And 1Mm Thick Laminate All Exposed Edges To Have Half Round Teak Wood Beading Finished With Melamine Polish Etc. All Complete As Per Approved Sample. , High Back Dining Chair - Supplying And Placing In Position Of High Back Dining Chair Of Size 450 X 450 X 900 Mm Made Out Of Teak Wood 45X30mm Frame Workwith Tapered 45 X 45 Mm Teak Wood Front Legs, Without Arm With 12 Mm Thick Commercial Ply With 50 Mm Thick High Density Foam On Seat Duly Upholstered With Fabric Of Approved Shade And Quality Back Having Teak Wood Strip In Approved Pattern Including Sprite Polish Etc. All Complete As Per Approved Sample. , Podium - Supplying And Placing In Position Of Double Top Type Podium Of Size 610X600x1050 Mm High Made Out Of 19Mm Thick Commercial Board With 2.5 Thick Teak On Side & Fornt Having Tapered Top With 1Mm Thick Laminate Finshed And One Of Halfe Top, Top To Have Space For Tube Fitting And 1 No Of Drawer Ride On Telescopic Channel, Bottom Portion To Have Pedestal Of 75Mm High, All Three Sides Leaning Out Approximatly 75Mm Front Side Having Grove Design, Including Melamine Polich Etc.Front With Logo Made Out Of 1Mm Thik Ss Sheet Of Perpottion Sizewithinbult Mike And Speakeretc All Complete. As Per Approved Sample. , Chair Medium Back - Supplying And Placing In Position Of Chair Medium Back With Writing Pad Of Size 560 X 590 X 900 Mm, Having Seat And Back Made Of Moulded Pu Foam 50 Mm Thick And Black Copolymer On Outer Cover. The Arm Rest Shall Be Made Of Steel Inserted Black Polyproplene For Superior Comfort, Chest Shall Be Supported On Steel 25Mm Crc Pipe Cent Livered Designee Inserted Extra Pipe For Strength Pedestal Of Approved Quality .The Frame Shall Beupholstered With Leatherette Of Approved Quality And Color All Complete As Per Direction Of Engineer-In- Charge.As Per Approved Sample. , Executive Table Cbb - Providingandplacingofexecutivetableofsize1500x900x750mmmadeoutof19mmthick Waterproof Commercialblockboardwith3.5Mmthickteakveneerofapprovedqualityandcolouronallexposedsurface. Wherever 38 Mm Thick Commercial Board Is Required, It Shall Be , By Joining Two 19 Mm Thick Boards. Edges Of Board To Be Covered Withsecond Class Teak Wood Lipping Of 4 Mm Thickand Moulding Of 25Mm Thick In Second Class Teak Wood On The Edges Of Table Top , Foot Rest Of Second Class Teak Wood Of Size 65 X 30 Mm. All Exposed Faces ( Inside / Outside ) To Be Finished With Melamine Polish With Two Or More Coats Etc.Complete Table Of Size 1350 X900 X 750 Mm With 12 Mm Thick Glass On Table Top With Bavelled And Polished Edges As Per Aproved Sample . , Counter - Supplying And Placing In Position Of 300Mm ( Above Counter Level ) To 450Mm ( Counter Level ) Deep Back Unit 1980 Mm High Made Out Of 19 Mm Thick Water Proof Commercial Board. All Outer Faces Finished With 3.5 Mm Thick Teak Veneer Of Approved Colour And Quality. Edges Of Board Shall Be Covered With Teak Wood Lipping. The Drawers To Be Provided With One Lock, Handles Of Approved Quality And Design. All Exposed Faces To Be Finished With Melamine Polish And Other Wooden Faces To Be Finished With Spirit Polish Etc All Complete.As Per Approved Sample. , Roller Blindes - Supply And Fixing Of Double Layer Roller Blindes Zebra Type Of Approved Make Of Vista Or Equivalent Including Aluminium Hollow Circular Pipe, Rollor Machisum, Side Endcaps, Brackets Including All Nessery Fitting Etc All Complere.Make Vistaor Equivalent As Per Approved Sample. , Frosted Film - Supply And Fixing Of Frosted Film Of Approvedmake 3M Or Equivalent Including Fixing With Appropate Adhisive And Cost Of Cutting And Cleaning Etc All Complete.As Per Approved Sample. Total Quantity : 1

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	13-Dec-2021			17-12-2021

Refer document

Refer document

INR 32.80 Lakhs /-

Sl. No.	Item Title	Item Description
1	Senior Executive Table	Providing and placing of Senior Executive Table of size 2400x1050x750 mmmade out of 19 mm thickwater proof commercial block board with 3.5 mm thick teak veneer of approved quality and colour on all exposed surface . Wherever 38 mm thick commercial board is required, it shall be ,by joining two 19 mm thick boards. Edges of board to be covered withsecond class teak wood lipping of 4 mm thick and moulding of 25mm thick in second class teak wood on the edges of table top , 3 Nos of drawers running on softclose qudro channel of supreme quality and required size. AllDrawers to have locking arrangement and handles of approved quality and design. Foot rest of second class teak wood of size 65 X 30 mm. All exposed faces ( inside / outside) to be finished with melamine polish with two or more coats etc. complete. Executive Table provided with 2400x1050 mm 12 mm thick glass on table top with bavelled and polished edges as per aproved sample .
2	Executive High Back chair	Supply and placing of Executive High Back chair. The seat and back are made up of 1.2cm.thick hot pressed plywood and upholstered with leather and moulded Polyurethane foam. HIGH BACK SIZE: 53.0cm. (W) X 95.4cm. (H) SEAT SIZE: 54.6cm. (W) X 49.0cm. (D) The chair has360 degree Revolving type , Front pivot synchro tilt mechanism,5position locking with anti-shock back mechanism.The HR Polyurethane foam is moulded withdensity=45+/-2 kg/m cube and hardness load 16+/-2 kgfas per IS:7888 for25%compression. The seat andback are arrested together with a 9.0cm..(w) spine madeof 0.8cmthk. HR steel.Thearmrest tube assy.is made of 2.54cmx0.16cm M.S.E.R.W.support tu be sand Chrome plated.The armrest top is made of ABS &upholstered with foam & leather. The pedestal is madeof die-cast aluminium with buffing finished.It is fittedwith 5nos.twin wheel castors.The pedestal is 67.0cm pitch-center dia ( 77.0 cm with castor).The twin wheel castors are injection moulded in Black Nylon. Colors Available : Black Synthetick Leather, Camel Brown Synthetick Leather all complete as per drawings and as directed by the Engineer-in-charge.
3	Three seater sofa	Supplying and placing in position 3 seater Sofa .The seat is made of PU ?foam with Density ?28?± ?2 kg?/?cu?.?mtr having an ?additional top layer of super soft. ?PU foam inDensity ?32 ?± ?2 ?kg?/?cu?.?upholstered with fabric ?or leatherette?. ? ?The back is ?made of PU foam with ?Density ?28 ?± ?2 ?kg?/?cu?. mtr with two additional ?top layer of supersoft ? foam of density ?32?±?2 ?kg?/?cu?. ?mtr?, ?upholstered ? with fabric or leatherette . ?Understructure is made ?up of ?1?.?2?±?0?.?1 ?cm?. ?thick ?hot pressed plywood ?( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose.?It is ?a welded assembly ?made in Stainless steel ?(?grade SS ?202?) ?tube ?& ?plate? with plastic endcap.(W)206.0* (D) 90.5(H) 85.5 cmseat (H) 45.0 cm. as per approved sample.
4	Two seater sofa	Supplying and placing in position Two seater Sofa. The seat is made of PU ?foam with Density ?28?± ?2 ?kg?/?cu?.?mtr having an ?additional top layer of super soft ?PU foam inDensity ?32 ?± ?2 ?kg?/?cu?.?upholstered with fabric ?or leatherette?. ? ?The back is ?made of PU foam with ?Density ?28 ?± ?2 ?kg?/?cu?. mtr with two additional ?top layer of supersoft ? foam of density ?32?±?2 ?kg?/?cu?. ?mtr?, ?upholstered ? with fabric or leatherette . ?Understructure is made ?up of ?1?.?2?±?0?.?1 ?cm?. ?thick ?hot pressed plywood ?( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose . ?It is ?a welded assembly ?made in Stainless steel ?(?grade SS ?202?) ?tube ?& ?plate? with plastic endcap. 1.35.0cm , 92.0cm, 82.0cm, 45.0cm(SH). as per approved sample.
5	Centre table	Supplying and placing in position Centre Table offollowing sizes made out of second class teak wood frame, side with 70 X 25 mm teak wood and 45 X 45 mm teak wood decorative legs as per approved design, including 20 X 20 mm teak wood moulding all exposed surfaces to be finished with melamine polish with two or more coats Of Size 900 X 900 X 400 mm with 8mm thick bevelled edge glass top. As per approved sample.
6	Mid back chair	Supply and placing in position, Midback chair.The seat & back are made up of 12mm thick hotpressedplywood,upholsteredwithfabric&mouldedwithPolyurethanefoamtogetherwithmouldedABSseatandback covers. The back foam should designed with contoured lumbar support for extra comfort. Mid back size 475 mm Width x580 mm height and seat size 470 mm Width x480 mm. The polyurethane foam should be moulded with density45 kg/m3 and hardness 16 +/2 kg on hampdem machine at 25% compression. Armrest are injection moulded from black copolymer polypropylene. The mechanism should be fixed 360 degree revolving type, Upright position locking, tilt tension adjustment, seat back tilting ratio 1:3. The pneumatic height adjustment has an adjustment stroke of 12 cm. The pedestal should be injection moulded inblack 33% glass filled in nylon 66 with 5 nos twin wheel castors. The pedestal should be 66.3 cm pitch-center dia. As per approved sample.
7	Discussion table	Supply and placingof Discussion table of shape and design round for 04 Persons of size 1200 x 1200 mm made out of teak wood and top with 19mm commercial board with 3.5 mm thick teak veneer of approved quality and colour on all exposed surface and edges cover with 30 x 20 mm thick second class teak wood beading, center leg with 300 mm wide and 04 Nos support to top with 50 x 30 mm thick second class teak woodall complete with two or more coats of melamine polish on all exposed (inside-outside)surfaces in approved colour and sample complete as insructed by engineer-in-charge as per approved sample.
8	Discussion table for 06 persons	Supplying and placing in position Discussion table of shape and design round for 06 Persons of size 1800 x 900 mm made out of teak wood and top with 19mm commercial board with 3.5 mm thick teak veneer of approved quality and colour on all exposed surface and edges cover with 30 x 20 mm thick second class teak wood beading, under structureofsize400 x 1200 mm wide and 04 Nos support to top with 50 x 30 mm thick second class teak woodall complete with two or more coats of melamine polish on all exposed (inside-outside)surfaces in approved colour and sample complete as insructed by engineer-in-charge as per approved sample.
9	Side rack	Supplying and placing in position Side Rackof size 900x450x750 mm made out of 19 mm thickwater proof commercial block board covered with 3.5 mm thick teak veneer of approved quality and colour on all exposed surfaceEdges of board to be covered withsecond teak wood class lipping of 4 mm thick.key board of size 525 X 400 mmand bottom portion to have space for C.P.U. drawer with telescopic channel of supreme quality and required size and open shelf with 3 Nos of drawers. Back to have 6 mm commercial ply with holes , and plugged with PVC hole cover for wiring , All exposed faces ( inside / outside) to be finished with melamine polish with two or more coats etc. complete Side Rackof size 1050x525x750 mm with 12 mm thick glass on table top with bavelled and polished edges as per aproved sample .
10	Centre table SCTW	Supplying and placing in position Centre Table offollowing sizes made out of second class teak wood frame, side with 70 X 25 mm teak wood and 45 X 45 mm teak wood decorative legs as per approved design, including 20 X 20 mm teak wood moulding all exposed surfaces to be finished with melamine polish with two or more coats Of Size 600 X600 X 400 mm with 8mm thick bevelled edge glass top. As per approved sample.
11	Executive table	Providingandplacingof ExecutiveTableofsize1800X900X750mmmadeoutof19mmthick waterproof commercialblockboardwith3.5mmthickteakveneerofapprovedqualityandcolouronallexposedsurface. Wherever 38 mm thick commercial board is required, it shall be ,by joining two 19 mm thick boards. Edges of board to be covered withsecond class teak wood lipping of 4 mm thickand moulding of 25mm thick in second class teak woodontheedgesoftabletop,3NosofdrawersrunningonS.S.telescopicchannelofsupremequalityand requiredsize.All Drawerstohavelockingarrangementandhandlesofapprovedqualityanddesign.Footrestof second class teak wood of size 65 X 30 mm. All exposed faces ( inside / outside) to be finished with melamine polish with two or more coats etc. complete . Tableof size 1800 X9000 X 750 mm with 12 mm thickglasson tabletop with bavelledand polishededgesas per aproved sample .
12	Steel Almirah large	Supplying and placing in positionStandard steel Almirah Large of size 1980x910x480 mmwith 4 Nos shelves making 5 compartment.body and shelves fabricated from22 gauge thick CRC MS plane sheet &doors with 20 gauge thick CRCMS plane sheet. Shutters shall be 02 Nos. with locking arrangments of approvedmake Godrej/ Harrisonincluding duplicate key. Handle should be 100mm long chromium plated steel. All surface of Almirah shall be Powder Coated of approvedcolours/shades all as per Engineer-in-Charge. As per approved sample.
13	Executive revolving chair	Supplying and placing in positionExecutiveRevolving and Tilting high back chair of size 560 X 590 X 1100 mm, having seat and back made of moulded PU foam 50 mm thick and black copolymer on outer cover. The arm rest shall be made of steel inserted black polyproplene for superior comfert, chest shall have gas liftmechanism and shall be supported on steel inserted nylon base with 5 castorspedestal of approved quality .The frame shall beupholstered with leatherete of approved quality and colour all complete as per direction of Engineer-in- Charge. As per approved sample..
14	Single seater sofa	Supplying and placing in position single seater Sofa. The seat is made of PU ?foam with Density ?28?± ?2 ?kg?/?cu?.?mtr having an ?additional top layer of super soft ?PU foam inDensity ?32 ?± ?2 ?kg?/?cu?.?upholstered with fabric ?or leatherette?. ? ?The back is ?made of PU foam with ?Density ?28 ?± ?2 ?kg?/?cu?. mtr with two additional ?top layer of supersoft ? foam of density ?32?±?2 ?kg?/?cu?. ?mtr?, ?upholstered ? with fabric or leatherette . ?Understructure is made ?up of ?1?.?2?±?0?.?1 ?cm?. ?thick ?hot pressed plywood ?( moisture resistance & termite proof as per IS: 303) & pinewood of cross section devoid of major knots & surface defects 6 nos. per seat & 3.8 mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose . ?It is ?a welded assembly ?made in Stainless steel ?(?grade SS ?202?) ?tube ?& ?plate? with plastic endcap.86.0cm , 92.0cm, 82.0cm, 45.0cm(SH). As per approved sample.
15	Conference table for 25 persons	Supply and placingof designee’s type conference table FOR 25 PERSONS having minimum size for 1 person should not be less then 750(w) x 600(D) x 750 (H)mm as perfollowing inclusion. Under Structure (Base) Under structure of size per person 750mm x 525mm x 715mm made out of 18 mm commercial block board board having both side same 1mm thicklaminate of matching shade of top or approved colourall four sides to have 4mm thick teak wood lipping. back provided with dual raseway for carrying electric data cables etc all complete.As per approved sample. Ultra high gloss tri coloured top work of rose burl. minimum size for 1 person should not be less then 750x600 x 750mm top edge to have 100mm wide 2 nos strip of 19mm thick CBB + 19mm thick CBB top edge thickness should be 63mm (19CBB + 19CBB + 19CBB + 3.5mm veneer + 2.5mm polyester polish)edges covered with 25 mm thick black coloured MDF board. ultra high gloss finish have to be achieved by applying 7 or more coated of ultra high gloss polyester before multi coat of UHGP surface of top to be have prepared by applying stainer, filling of pores & open veins, cutting & grinding and applying 3 or more coats of epoxy after complete process of polishing, epoxy & polyester coat It should be measuring 2 to 2.5 mm thick layer of polish final finish should be Ultra high gloss & Scratch resistancewax and rubbing of make 3M shall be used for buffing. Shall be done with nylon buff and machine etc all complete. As per approved sample.
16	Conference table for 15 persons	Supplying and placing in position designee’s type conference table FOR 15 PERSONS having minimum size for 1 person should not be less then 750(w) x 600(D) x 750 (H)mm as perfollowing inclusion. Under Structure (Base) Under structure of size per person 750(w) x 600 (d)x 715(h)mm made out of 18 mm commercial block board board having both side same 1mm thicklaminate of matching shade of top or approved colourall four sides to have 4mm thick teak wood lipping. back provided with dual raseway for carrying electric data cables etc all complete.As per approved sample. Ultra high gloss tri coloured top work of rose burl. minimum size for 1 person should not be less then 750x600 x 750mm top edge to have 100mm wide 2 nos strip of 19mm thick CBB + 19mm thick CBB top edge thickness should be 63mm (19CBB + 19CBB + 19CBB + 3.5mm veneer + 2.5mm polyester polish)edges covered with 25 mm thick black coloured MDF board. ultra high gloss finish have to be achieved by applying 7 or more coated of ultra high gloss polyester before multi coat of UHGP surface of top to be have prepared by applying stainer, filling of pores & open veins, cutting & grinding and applying 3 or more coats of epoxy after complete process of polishing, epoxy & polyester coat It should be measuring 2 to 2.5 mm thick layer of polish final finish should be Ultra high gloss & Scratch resistancewax and rubbing of make 3M or equivlant shall be used for buffing. Shall be done with nylon buff and machine etc all complete. As per approved sample.
17	Steel Almirah medium	Supplying and placing in position Steel Almirah Medium : Supply of Steel Almirah Medium of size 1270 x 760 x 430 mmwith 3 Nos shelves, body fabricated from 20 guage thick CRC MSplain sheet on top, bottom & doors and 22 gauge thick CRC MSplain sheet on sides, back & shelves.Shutter shall be 02 Nos with locking arrangement of approved makeGodrej / Harrison or equilent including duplicate key.Handle should be 100 mm long chromium plated steel. All surface of Almirah shall be powder coated of approved colours/shade etc completeAs per approved sample.
18	Dining table for 4 persons	Supply and placing of Dining Table for 4 person of size 1200x900x750mm made out of teak wood frame ( side rail 90x30mm & legs 70x70mm) top 19mm commercial board and 1mm thick laminate all exposed edges to have half round teak wood beading finished with melamine polish etc. all complete as per approved sample.
19	High back dining chair	Supplying and placing in position of high back Dining Chair of size 450 x 450 x 900 mm made out of teak wood 45X30mm frame workwith tapered 45 X 45 mm teak wood front legs,without arm with 12 mm thick commercial ply with 50 mm thick high density foam on seat duly upholstered with fabric of approved shade and quality back having teak wood strip in approved pattern including Sprite polish etc. all complete as per approved sample.
20	Podium	Supplying and placing in position of double top type Podium of Size 610x600x1050 mm high made out of 19mm thick commercial board with 2.5 thick teak on side & fornt having tapered top with 1mm thick laminate finshed and one of halfe top, top to have space for tube fitting and 1 no of drawer ride on telescopic channel, bottom portion to have pedestal of 75mm high, all three sides leaning out approximatly 75mm front side having grove design, including melamine polich etc.Front with logo made out of 1mm thik SS sheet of perpottion sizewithinbult Mike and speakeretc all complete. As per approved sample.
21	Chair medium back	Supplying and placing in position of Chair medium back with writing pad of size 560 X 590 X 900 mm, having seat and back made of moulded PU foam 50 mm thick and black copolymer on outer cover. The arm rest shall be made of steel inserted black polyproplene for superior comfort, chest shall be supported on steel 25mm CRC pipe cent livered designee inserted extra pipe for strength pedestal of approved quality .The frame shall beupholstered with leatherette of approved quality and color all complete as per direction of Engineer-in- Charge.As per approved sample.
22	Executive table CBB	ProvidingandplacingofExecutiveTableofsize1500X900X750mmmadeoutof19mmthick waterproof commercialblockboardwith3.5mmthickteakveneerofapprovedqualityandcolouronallexposedsurface. Wherever 38 mm thick commercial board is required, it shall be ,by joining two 19 mm thick boards. Edges of board to be covered withsecond class teak wood lipping of 4 mm thickand moulding of 25mm thick in second class teak wood on the edges of table top , Foot rest of second class teak wood of size 65 X 30 mm. All exposed faces ( inside / outside) to be finished with melamine polish with two or more coats etc. Complete Table of size 1350 X900 X 750 mm with 12 mm thick glass on table top with bavelled and polished edges as per aproved sample .
23	Counter	Supplying and placing in position of 300mm (Above Counter level)to 450mm (Counter level) deep Back Unit 1980 mm high made out of 19 mm thick water proof commercial board. All outer faces finished with 3.5 mm thick teak veneer of approved colour and quality. Edges of board shall be covered with teak wood lipping. The drawers to be provided with one lock, handles of approved quality and design. All exposed faces to be finished with melamine polish and other wooden faces to be finished with spirit polish etc all complete.As per approved sample.
24	Roller blindes	Supply and fixing of double layer roller blindes zebra type of approved make of vista or equivalent including aluminium hollow circular pipe, rollor machisum, side endcaps, brackets including all nessery fitting etc all complere.Make Vistaor equivalent As per approved sample.
25	Frosted film	Supply and fixing of frosted film of approvedmake 3M or equivalent including fixing with appropate adhisive and cost of cutting and cleaning etc all complete.As per approved sample.