Beautification Of Herbal Park From Starting Point With Railing, Tiles And Misc Work In Ward No 3, Baddi
Tender Value
8 Lakhs
Estimated cost
Bid Submission
22 Dec 2021
0 days left
EMD
16000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baddi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Beautification Of Herbal Park From Starting Point With Railing, Tiles And Misc Work In Ward No 3, Baddi
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of Soil as per the direction of Engineer in Charge |
| 2 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for allleads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions as per the direction of Engineer in Charge |
| 3 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extrasand. complete all as per direction of Engineer-in- Charge. 80mm thick paver blocks ISI Mark |
| 4 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Brick work with common burnt clay modular bricks ofclass designation 7.5 in foundation and plinth in Cement Mortar 1:6 (1 cement : 6 coarse sand) as per the direction of Engineer in Charge |
| 6 | Brick work with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 in superstructure aboveplinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) as per the direction of Engineer in Charge |
| 7 | 15 mm cement plaster on rough/Fair side ofrick wall finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) as per the direction of Engineer in Charge |
| 8 | Applying Jk/ Birla/white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface completeincludingcarriage of material in all leads and lifts. Qty As Item No 6 as per the direction of Engineer in Charge |
| 9 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two or more coats) over andincluding water thinnable priming coat with cement primer Qty as per Item No 6 as per the direction of Engineer in Charge |
| 10 | Structural steel work in single section, fixed with orwithout connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steelm primer all complete. |
| 11 | Structural steel work riveted, bolted or welded in built upsections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 12 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture as per the direction of Engineer in Charge |
AI Tender Summary
Tender Timeline
Dec 04, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 22, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 23, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender