Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #30148330

Bids Are invited for Structure Members - Supply only modular living shelter relocatable (Inflatable tent) ofsize 4m x 5m, up to a height of 2.5 meters (20 Sqm.) when fully assembled.These modular tents ( In two Parts) are foldable and erected by inflating

Issued by Statutory Bodies & Commissions/Committees · , West Bengal
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Dec 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
→ West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Bids Are invited for Structure Members - Supply only modular living shelter relocatable (Inflatable tent) ofsize 4m x 5m, up to a height of 2.5 meters (20 Sqm.) when fully assembled.These modular tents ( In two Parts) are foldable and erected by inflating them with an air–Compressor under but not more than 10 min and can be used in any kind of terrain and at high altitudes of over 17,000 Ft. It can operate in temperatures as lowas -30 degrees C, snow load of 15 Kg/ Sqm and wind speed upto 120Km/hr. The main frame of the tent is made of air-beam frame technology where arches are made using air-beams. These arches are interconnected by horizontal Inflated air-beams to form the tent skeleton. This skeleton is draped on the outer side with rugged vinyl coated polyester fabric to form the tents outer cover. The inner side of the air-beams are draped with lightweight insulating layer. This creates an insulating air gap (air-column) between the outer and the inner layer having an air column thickness of 300 mm, (diameter of the main frame air-beams). This insulating air barrier prevents heat transfer creating a comfortable living environment inside; the interior can be heated or cooled depending on the outside temperature. The structure can be dismantled into two parts of 40 kg each for easy transportation. The front and back of the tent has zipper lockable doors which open into a connecting vestibule/ air breaker or another tent, as per design layout. (All Electrical Fitting to conform to ISI standards) All as per specifications and directions , Cable PVC - Cable PVC insulated aluminum conductor served with inner sheathing of PVC tape armoured with galvanized steel wire or tape and overall PVC sheathed cross sectional area 10 Sqmm 2 Coresuspended by insulating hanger not more than 1 Mtr apart including4. Make: Polycab/Havells/Plaza/Finolex , Pedestal Fan - Pedestal Fan, Heav Duty, MS Body 400 mm sweep. All as per 3103-1975Make :Khaitan/Polar/ Usha/Bajaj. , PVC box - PVC b

AI Tender Summary

OUR REF NO 30148330
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 20-12-2021
Authority
Authority Name Indian Army
Work Description Bids Are invited for Structure Members - Supply only modular living shelter relocatable (Inflatable tent) ofsize 4m x 5m, up to a height of 2.5 meters (20 Sqm.) when fully assembled.These modular tents ( In two Parts) are foldable and erected by inflating them with an air–Compressor under but not more than 10 min and can be used in any kind of terrain and at high altitudes of over 17,000 Ft. It can operate in temperatures as lowas -30 degrees C, snow load of 15 Kg/ Sqm and wind speed upto 120Km/hr. The main frame of the tent is made of air-beam frame technology where arches are made using air-beams. These arches are interconnected by horizontal Inflated air-beams to form the tent skeleton. This skeleton is draped on the outer side with rugged vinyl coated polyester fabric to form the tents outer cover. The inner side of the air-beams are draped with lightweight insulating layer. This creates an insulating air gap (air-column) between the outer and the inner layer having an air column thickness of 300 mm, (diameter of the main frame air-beams). This insulating air barrier prevents heat transfer creating a comfortable living environment inside; the interior can be heated or cooled depending on the outside temperature. The structure can be dismantled into two parts of 40 kg each for easy transportation. The front and back of the tent has zipper lockable doors which open into a connecting vestibule/ air breaker or another tent, as per design layout. (All Electrical Fitting to conform to ISI standards) All as per specifications and directions , Cable PVC - Cable PVC insulated aluminum conductor served with inner sheathing of PVC tape armoured with galvanized steel wire or tape and overall PVC sheathed cross sectional area 10 Sqmm 2 Coresuspended by insulating hanger not more than 1 Mtr apart including4. Make: Polycab/Havells/Plaza/Finolex , Pedestal Fan - Pedestal Fan, Heav Duty, MS Body 400 mm sweep. All as per 3103-1975Make :Khaitan/Polar/ Usha/Bajaj. , PVC box - PVC b
Basic Detail
Tender No GEM/2021/B/1733593
Bidding Type Tender
Location
City
State West Bengal
Key Dates
Publish Date 05 Dec 2021
Submission Date 20 Dec 2021
Open Date 01 Jan 0001
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
2912512_Boq_2.xlsx
2cbc7c29-1399-4cb4-b525-3bbf2de34752.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Dec 05, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 20, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed

Tender Documents

Download All (ZIP) ↓
xlsx

2912512_Boq_2.xlsx

pdf

2cbc7c29-1399-4cb4-b525-3bbf2de34752.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders