|
| 1 | Multi-product calibrator with 1 KV Mega ohmmeter calibration option includes an internationally traceable calibration certificate |
| 2 | 50 - Turn coil for clamp – meter calibration |
| 3 | Transit case |
| 4 | 10kV voltage divider and resistance multiplier |
| 5 | Deluxe multi-use maxi kit |
| 6 | High Performance superior Multi product calibrator |
| 7 | High performance superior multi product calibrator includes accredited calibration certificate |
| 8 | Lead set to be used with 5522A |
| 9 | 50-Turn coil for clamp-meter calibration |
| 10 | Desktop 6.5 Digit Multimeter |
| 11 | 6.5 digit precision multimeter. 24 ppm USB memory and with accredited calibration certificate |
| 12 | 2x4 wire ohms 1000V test lead |
| 13 | 100 Ohm RTD temperature probe |
| 14 | 8.5 digit reference millimeter includes accredited calibration certificate |
| 15 | Comprehensive measurement lead kit |
| 16 | Transconductance Amplifier , 120A |
| 17 | Transconductance amplifier, 120A |
| 18 | Coil 12V DC supply |
| 19 | Coil, 25 turn, 3000 Amp |
| 20 | Automation Software |
| 21 | MET/ CAL with MET/ TEAM express software |
| 22 | Accessories:- |
| 23 | USB-to-GPIB controllers, quantity 2 |
| 24 | IEEE-488 shielded interface cable, 1M |
| 25 | High Performance Oscilloscope Calibrator |
| 26 | 3.2 GHz high performance oscilloscope calibrator workstation includes accredited calibration certificate |
| 27 | Active head with 3.2 GHz and 150 PS/ 500PS pulse capability |
| 28 | Decade resistance Box |
| 29 | RAI make Decade inductance box |
| 30 | RF Calibration System |
| 31 | Low Phase Noise Reference RF Calibrator |
| 32 | 27 GHz RF reference, LL microwave output, HF leveling kit |
| 33 | Accessories:- |
| 34 | Ruggedized transit case |
| 35 | RF interconnect kit, sacrificial RF adapters, connector TORQ, wrenches |
| 36 | Additional power sensor |
| 37 | System Analyzer |
| 38 | Spectrum analyzer (Handheld top) 1MHz to 20 GHz |
| 39 | Desktop spectrum analyzer-9kHz to7GHz |
| 40 | Power and Energy Calibration System |
| 41 | Test Bench |
| 42 | Energy meter version with all required metering for current, voltage, frequency, temperature, 5KVA UPS, PC with all connections, operating system and printer |
| 43 | Three Phase Power / Energy Calibrator |
| 44 | Three phase system power standard 1X6105A/E/80A/CLK2X 6160A/80A |
| 45 | Rack mount kit |
| 46 | Energy optical sensor |
| 47 | Energy disc sensor |
| 48 | Pressure Calibration System |
| 49 | Electronic Dead weight tester |
| 50 | Electronic deadweight tester, 40 MPA (6K PSI) |
| 51 | Fluid, sebacate, 1 GAL |
| 52 | Pneumatic pressure controller |
| 53 | Bench top pressure calibrator, NPT, P3000 test port, 20 MPa (3000 PSI) |
| 54 | Pressure measurement module – 100 to 250 kPa (-15 to 36 psi) gauge |
| 55 | Pressure measurement module, 0 to 1 MPa (0 to 150 psi) gauge |
| 56 | Pressure measurement module, 0 to 2 MPa (0 to 300 psi) gauge |
| 57 | Pressure measurement module, 0 to 4 MPa (0 to 580 psi) gauge |
| 58 | Contamination prevent system 20 MPa (3K PSI) standard port, without adaptors |
| 59 | Lines and fitting kit for 2271A-BSP-HC20 |
| 60 | Adaptor set, standard test port, 20 MPa (3000 PSI) |
| 61 | Reusable transit case for 227X |
| 62 | Maintenance Tools |
| 63 | Wireless TRMS thermal multimeter with iFlex |
| 64 | Power quality & motor analyzer |
| 65 | Large soft case |
| 66 | Gear tool box |
| 67 | Clamp on power meter |
| 68 | LED stroboscope |
| 69 | FC vibration meter with 805ES |
| 70 | Toolpak magnetic meter hanger |
| 71 | Volt light |
| 72 | Electronics master test lead set |
| 73 | Industrial true RMS multimeter |
| 74 | Thermal Imager |
| 75 | Handheld Oscilloscope |
| 76 | Temperature Calibration Work Station(Break up as follows) |
| 77 | Antistatic ESD Test Bench |
| 78 | Power Supply Panel |
| 79 | Utility Power Supply Socket |
| 80 | Variable DC Power Supply |
| 81 | AC Varaic; AE -10D1P |
| 82 | Low Range Temperature Dry Block Calibrator |
| 83 | High Range Temperature Dry Block Calibrator |
| 84 | Portable Micro bath - Medium Range |
| 85 | Portable Micro bath - Low Range |
| 86 | High Temperature Salt Bath; range 200 - 550 Deg C |
| 87 | Surface Calibrator |
| 88 | Super DAQ Precision Temperature Scanner |
| 89 | Secondary Platinum Resistance Thermometer |
| 90 | Secondary Platinum Resistance Thermometer- bend type |
| 91 | High Precision Thermo-Hygrometer with logger |
| 92 | Portable Temperature / Multifunction Calibrator cum Simulator |
| 93 | Portable Temperature / Multifunction Calibrator cum Simulator |
| 94 | Pressure Calibration Work Station(Break up as follows) |
| 95 | Antistatic ESD Test Bench |
| 96 | Power Supply Panel |
| 97 | Utility Power Supply Socket |
| 98 | Variable DC Power Supply |
| 99 | AC Variac; AE -10D1P |
| 100 | Hydraulic Pressure Controller; Pressure Controller with 100 MPA high RPT and 20 MPA low RPT |
| 101 | Dead Weight Tester |
| 102 | Electronic Dead Weight Tester |
| 103 | Automated High Pressure Pneumatic Pressure Calibration (Naval version) |
| 104 | Compass enhanced Single License (Compass software P. Enhanced, single user, CD) |
| 105 | Electronic Calibration Work Station(Break up as follows) |
| 106 | Antistatic ESD Test Bench |
| 107 | Power Supply Panel |
| 108 | Utility Power Suppy Socket |
| 109 | 64 V, 20 A Dual Output Variable DC Power Supply |
| 110 | 3 Phase AC Variac; AE-20D3P(3 Phase , 20 Amps) |
| 111 | Soldering / Desoldering Station |
| 112 | Frequency Generator |
| 113 | Oscilloscope |
| 114 | RPM Calibration Facility; RPM 1200 |
| 115 | Wide Body Calibration Van including interior Fabrications |
| 116 | Information to be filled by Bidders marked in Yellow |
| 117 | Note: The tendered equipment needs to be integrated with suitable software controls/monitoring system and work to be executed as Turnkey project. |
