Kanpur Electricity Supply Co Limited-KESCO has published Control Room Extension 33-11 Kv Substation Dada Nagar Kesco Kanpur. Submission Date for this Tender is 21-12-2021. Substation Tenders in Kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Civil work: |
| 2 | Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metres. (CSI No. 15.01) |
| 3 | Earth filling under floors and/or sub station area including cost of earth when obtained from with in 8 km outside UPPCL area including its roylty and carriage including watering, ramming in 20 cm layers and dressing of earth etc. all complete. (CSI No. 4.10) |
| 4 | Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (PWD CSI No. 4.01) |
| 5 | Concrete with 4cm gauge stone ballast, coarse sand (F.M. 1.8 to 2.5) & cement in proportion of 12:6:1 in foundations &under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No. 5.02) |
| 6 | 1st class brick work in 1:4 cement and coarse sand of 2.25 F.M. mortar in foundation and plinth including supply of all material, labour and T&P etc. requiredfor proper completion of work. (PWD 6.03.) 2020-21 |
| 7 | RCC work with cement, approved coarse sand and 2cm (3/4”) gauge approved stone ballast in the proportion of 1:1.5:3 in Raft/Footing excluding supply of reinforcement and its bending but including its cutting, fixing and binding the same with 24 B.W.G. G.I.wire including necessary centering and smooth shuttering etc required for proper completion of work including supply of all material, binding wire, labour and T&P etc. (CSI 5.27)2020-21 |
| 8 | RCC work with cement approved coarse sand (F.M. 1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3 in slab, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P . (CSI No. 5.24) |
| 9 | RCC work with cement approved coarse sand (F.M. 1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3 in RCC T beam-slab, column and RCC wall excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. (Only web of T or L beam shall be measured). (CSI No. 5.29) |
| 10 | RCC work with cement approved coarse sand (F.M. 1.8 to 2.5) and 2 cm gauge graded approved hard stone ballast like grainite, quartzite etc from Dalla, Jhansi or other quarries and approved coarse sand in proportion 1:1.5:3 in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. . (CSI No. 5.23) |
| 11 | 1st class brick work in 1:4 cement and coarse sand of 2.25 F.M. mortar in super structure in one brick thick wall including supply of all material, labour and T&P etc. requiredfor proper completion of work. (PWD 6.03+6.07) |
| 12 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage, bend, hooks, and authorized overlapping as required for proper completion of the work. (PWD 10.03) 2020-21 |
| 13 | 12 mm cement plaster in single coat fair sideor half brick wal for interior plasting upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth.(PWD 13.01/1758III)2020-21 |
| 14 | 15 mm cement plaster in single coat on rough side of single or half brick wal for interior plasting upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth.(PWD 13.02/1759III)2020-21 |
| 15 | Concreting of 40 mm thick RCC trench covers in mild steel frame work with RCC 1:1.5:3 in Cement,Chopan coarse sand (F.M. 1.8 to 2.5) and 2cm gauge graded hard stone ballast with 3mm thick floating coat of neat cement finish on top of cover complete with all labour, materials and placing the same in proper position at required location of cable trench within the substation area. (CSI No. 5.18) |
| 16 | 3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work. (cement consumtion 0.044 bag/Sq.m.) (CSI No. 11.20) |
| 17 | S/F Galvanized Mosquitos proof heavy quality iron wire gauge (14x24) over window frames and including supply ofCountry wood battens 8cm x 1cm. and including supply and fixing of necessary screws, all materials,labour and T&P etc. required for proper complete. (CSI No. 8.43) |
| 18 | Supply and fixing of chromium polished iron fitting with screws for doors and windows etc. |
| 19 | (b) L-Drop 16 mm dia 10" long |
| 20 | (g) Handle 6" long |
| 21 | (j) M.S Hinges 4" long |
| 22 | (c) L-Drop 12mm dia 8" long |
| 23 | (k) Stopper with rubber pad |
| 24 | Civil work: |
| 25 | Providing and laying floor of 10 mm thick vetrified tiles (Standerd quality) in flooring or skirting of approved brand (Bell, Johnson or equi. make) size of 600x600 mm of approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of tile including cost of all material, labour and T&P required fo (CSI No. 12.18) New 2020-21 |
| 26 | Providing and laying of 20 mm thick granite ( black/ brown) in flooring or skirting ,of approved shade, colour,size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of granite floor including cost of all material, labour and T&P required for proper completion of the work, as per direction of Engineer incharge. (CSI No.12.20A) |
| 27 | Cement concrete with 2cm gauge approved hard stone ballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 3:1.5:1 including supply of all materials, labour,side shuttering if required and T&P etc. required for proper completion of work. (CSI No. 5.21) |
| 28 | Mild Steel or Iron work in heavy sizes such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (PWD 10.01(i) |
| 29 | As in item 9.01 above but when steel is to be provided by the department. (PWD 10.02) |
| 30 | Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20) |
| 31 | Painting two coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including thorough washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.22+23) |
| 32 | One priming coat and two coat oil bound distemper on new work including supply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 13.08+09) |
| 33 | Painting or varnishing new iron work in small areas or new wood work with one coat of ready mixed priming paint and two coat of approved superior quality ready mix paint "Luxol" or equivalent brand or varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should conform to the I.S. 103-1950. (CSI No. 13.01+02) |
| 34 | Disposal of rubbish /debris out side the UPPCL area as per direction of Er in charge including cartage, labour and material, T&P etc. required for proper completion of the work ( NO. deduction for void shall be made) ( CSI NO 20.16)2020-21 |
| 35 | Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit concealed in wall with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit on surface, GP Box, piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect as per direction of E/I. (PWD 131-C) |
| 36 | Wiring point for plug with 1 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduitConcealed in wallwith 1.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect as per direction of E/I. (PWD 134-C) |
| 37 | Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer. (PWD 1139) |
| 38 | Wiring point for fan /fresh air fan (light duty exhaust fan)with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cablein PVC conduit Concealed in wallwith 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the conduit piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect as per direction of E/I. (PWD 133-C) |
| 39 | Supply & fixing of LED Tube light fitting 18watt -4Ft. of Crompton or equivalent make including labour T&P etc. (NSI Old ag. rate) |
| 40 | Making hole in the wall for exaust fan and finishing properly complete in all rispect.(PWD 1121) |
| 41 | Erection and testing of exaut fan on existing hole with sutable size of rag bolt nut and washer etc.complete in all rispect.(PWD 1120) |
| 42 | Supply & fixing of LED Bulb of 9 watt of Crompton or equivalent make including labour T&P etc. (NSI) |
| 43 | Providing and fixing 110 mm dia PVC Pipe of 6Kg. Per sq.cm.pressure wit specials for rain water in Buildings as per dir. Of E/I complete. (Old CSI 24.51) |
| 44 | Supply & fixing ceiling fan of high speed 48” of Havels, Crompton or equivalent make including labour & TP etc. (NSI old ag. rate) |
| 45 | Supply & fixing wall fan of high flow wave 400mm of Havels, Crompton or equivalent make including labour & TP etc. (NSI old ag. rate) |
| 46 | Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia PVC conduit on surface, with one number 2.5 sq. mm. multistrand copper drawn in conduit complete in all respect. (PWD 211-C) |
| 47 | S/R of regulator for ceiling fan of GEC or equivalent make including cost of all labour material, T&P etc. required for proper completion of the work. (CSI 22.60b) |
| 48 | S&F of 6 Amp to 32 Amp. MCB (10 KA) C Curve. (PWD 1002-B) |
| 49 | Supply & fixing A.C box with M.C.B. of L&T or equivalent make including labour & TP etc. (NSI) |
| 50 | S&F of 32 Amp. double pole change over switch on 25mm x 25mm x 3mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. (PWD C.S.I. No. 374) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
