|
| 1 | Supply installation testing and commissioning ofelectric element type hot water generatorcomplete with s tank, cylindrical shell 10mm with dished ends,sheetmetal enclosure, integral electrical and control panel i/c all operational and safety controls.The Boiler shall be Horizontal type capacity of 65000 kcal /hr capacity sutable upto 90 degree temperature, bank will consist threesteps with micro processor intelligent step controller and reverse flow sensor, i/c making cc foudation and complete in all respects(Rapidcool/Biasi/Dyna Flow) |
| 2 | Supplying, installation, testing & commissioning of hot water coupledpumpsuitable to deliver 12 CU/MTR at 6mtr head centrifugal &making suitableCC (Cement : Concrete) foundation , connection etc. as required( Grundfos/wilo/CRI)/Kirlosker |
| 3 | Supplying, installation, testing & commissioning of fancycompact type,wallmountedheating radiator unit complete as required ( Make: Biasi/Rapidcool/Ultratherm |
| 4 | 2400KCAL |
| 5 | 2100KCAL |
| 6 | Supply, installation, testing and commissioning of hot water piping and fittings complete with supports, hangers and specified insulation thickness. All piping shall be black mild steel Class C, ISI marked withfitting. The unit rate of piping shall include this support arrangementand hangersi/c wooden saddles where required under insulation atsupportpoints.The piping shallfiberglass section insulationfinally coveredwith Al. Cladding |
| 7 | 50 mm pipe with 75mm insulation. |
| 8 | 38 mm pipe with 50 mm insulation. |
| 9 | 32 mm pipe with 50 mm insulation. |
| 10 | 25 mm pipe with 50 mm insulation. |
| 11 | 19 mm pipe with 50 mm insulation. |
| 12 | Supplying, laying / fixing, testing & commissioning of following sizes of un insulatedMS ERW piping conforming to IS 3589class - Cwith necessary clamps supports, vibration isolators, hangers, fittings such as bends tees, reducers etc as required |
| 13 | 19 mm Diameter. |
| 14 | Supply, installation, testing and commissioning of Gatevalves isi markedwith flangeandshall be gunmetal non rising stem, integral seat, body test pressure 50kgf/cm Hyd (MAKE: KRILOSKAR/SANT/LEADER) |
| 15 | 50 mm |
| 16 | 40mm |
| 17 | 19 mm |
| 18 | Supply, installation, testing and commissioning Pressure gauge with stopvalvecomplete as required |
| 19 | Supply, installation, testing and commissioning Thermostatic Head valvecomplete set |
| 20 | Supply installtion testing & commissioning of (Main Electrical control Panel ) MB panel board fabricated from 2 mm thick CRCA steel sheet seven tank process powder coated floormountedsectionlised cubical type with bus bars i/c making the interior connections painting etc.Interlocking arrangement for boiler and pumps |
| 21 | Providing and laying of aluminium conductor, PVC insulated and PVCsheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground in the same trench, in one tier horizontal formation to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering etc.95 sqmm x 3.5 core |
