|
| 1 | Providing and laying of chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1 :4 (1 cement: 4 coarse and). Dark shade pigment using ordinary cement(HSR 10.30.3) |
| 2 | Providing and fixing of Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 ( 1 cement : 4 coarse sand)(HSR 10.37.1) 25 mm thick |
| 3 | Providing and fixing of Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.(HSR 10.38) |
| 4 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1 :4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.(HSR 10.50.1) |
| 5 | Regarding terracing of mud phaska covered with tiles or brick, in cement mortar by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1 :3 (1 cement : 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded), all complete as per direction of Engineer-in-Charge. (HSR 30.9) |
| 6 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (HSR 30.16.1) With cement mortar 1 :4 ( 1 cement : 4 fine sand) |
| 7 | Applying priming coats with primer of approved brand and manufacture, having low voe (Volatile Organic Compound ) content With ready mixed pink or grey primer on wood work (hard andsoft wood) having voe content less than 50 grams/ litre (HSR 11.69.1) |
| 8 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer (HSR 11.67.10) |
| 9 | Distempering with 1st quality acrylic distemper (Ready mix) having voe content less than 50 grams/ litre of approved brand and manufacture to give an even shade (HSR 30.25.1) Old work (one or more coats) |
| 10 | Finishing walls with Acrylic Smooth exterior paint of required shade (HSR 30.37.1) Old work (Two or more coat applied @ 1.67 litre/ 10 sqm) on existing cement paint surface |
| 11 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty (HSR 30.54.1) Float glass panes of nominal thickness 4 mm (weightnot less than 1O kg/sqm) |
