Military Engineer Services has published a tender for Repair And Maintenance Of Mes Installation At Bagrakote Under Ge Sevoke Road. Submission Date for this Tender is 22-12-2021 and Tender estimated value is 4300000. Civil Work Tenders in GE SEVOKE ROAD West Bengal. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | M&L for preparation of old plastered surfaces of walls and applyingone coat of white wash complete all as specified and as directed. |
| 2 | All as per item No. 01 here-in-before but on ceiling complete all as specified and directed. |
| 3 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 4 | M&Lrendering 15mm thick in CM 1: 6on fair faces of brick/concrete surfaces finished even & smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces inCM 1:4 includingmixing WPC as per manufacturers instruction, finished even and smooth without using extra cement complete all as specified and directed. |
| 6 | M&L for rendering 5mm thick in CM 1:4 of fair faces of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 7 | Supply only integral water proofing compound complete all as specified and directed. |
| 8 | M&L for preparation of new plastered surfaces and applyingthree coats of white wash on wall complete all as specified and directed. |
| 9 | M&L for preparation of new plastered surfaces and applyingthree coats of white wash on ceiling surfaces complete all as specified and directed. |
| 10 | M&L for preparation of old painted wood or wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 11 | M&L for preparation of old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described, and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 12 | M&L for writing letter or figures, using thick paint, as approved, (Block, Roman, Italic or Indian) not exceeding 30cm high complete all as specified and as directed. |
| 13 | Taking down chowkats with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each complete all as specified and directed. |
| 14 | S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 15 | All as per item No.14 above, but without glazing bars complete all as specified and directed. |
| 16 | S&F Steel ventilator with top hung shutter incl hinges, steel peg stay including one coat of red oxide primer complete all as specified and directed. |
| 17 | S&F 3mm thick float glass ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed. |
| 18 | S&F Mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanksand similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed. |
| 19 | Taking down chowkats with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and directed. |
| 20 | S&F pressed steel frames (Size-165X60mm) for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc including providing one shop coat or red oxide zinc chrome primer complete all as specified and directed. |
| 21 | S&F pressed steel frames (size-105X60mm) for doors with one rebate incl necessary fixing lugs, hinges, lock strike plate etc including providing one shop coat or red oxide zinc chrome primer complete all as specified and directed. |
| 22 | M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in block for hold fast, filling in frames, copings or similar work and finished the surface with existing including form work complete all as specified and directed. |
| 23 | S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS sqare tube, complete all as specified and directed. |
| 24 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heatmoulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail;Paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixed in frame complete all as specified and directed. |
| 25 | S&F Factory made 2nd class hard wood rail and style 35mm thick plain framed, panelled shutter (two panel ) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board withcommercial veneering on both faces. The size of rail and style as per IS:1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 26 | M&L 35 mm thick Glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauge etc size of members of shutters as specified in SSR part-I Section 8 and clause 8.24(a) of second class hard wood complete all as specified and directed. |
| 27 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples fixed in repairs complete all as specified and directed. |
| 28 | S&F mild steel tower bolts stove enameledblack with bright bolt 200 mm long complete all as specified and directed. |
| 29 | S&F mild steel pressed handle oval type stove enamelled black 150 mm long complete all as specified and directed. |
| 30 | S&F 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolts not less than 12mm dia with including a minimum of 6 bolts & nuts four on bolts plate & two on staple plate complete all as specified and directed. |
| 31 | S&F 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 32 | S&F 150mm long anodized aluminium barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 33 | S&F Stainless Steel Butt Hinges 100mm Long complete all as specified and directed. |
| 34 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 35 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 36 | M&L for Brick work with sub class "B" bricks, straight or curved on plan, exc 6m mean radius built in CM 1:4 complete all as specified and directed. |
| 37 | M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 38 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above GL) complete all as specified and directed. |
| 39 | M&L 75mm thickcement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection & pavingfinished even & smooth without using extra cement complete all as specified and directed. |
| 40 | M&L40mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floor finished even and smooth using extra cement complete all as specified and directed. |
| 41 | S&F glass dividing strip 3mm thick & 38mm width complete all as specified and directed. |
| 42 | Dismantling wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 43 | S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick decorative type non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed.Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm) |
| 44 | Preparing of new non AC board surfaces and applying three coats of white wash on ceiling complete all as specified and directed. |
| 45 | Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 46 | M&L for rendering in CM (1:4), 10mm thick on fair faces of brick work or concrete surfaces for fixing of wall tiles complete all as specified and directed. |
| 47 | M&L for screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finishes complete all as specified and directed. |
| 48 | M&L for glazed ceramic coloured tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and directed. |
| 49 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and directed. |
| 50 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and directed. |
| 51 | M&L for preparation of new or previously untreated wood or wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed complete all as specified and directed. |
| 52 | M&L for preparation of new or previously untreated steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint on windows complete all as specified and directed. |
| 53 | Taking up or downgalvanised steel water tubing 15mm bore from wall/ceiling/floor including all fittings, segregating and stacking thepipes and fittings properly at site for checking complete all as specified and directed. |
| 54 | All as per item No 53 above, but for 20mm bore complete all as specified and directed. |
| 55 | Refixing oldserviceable galvanised steel water tubing 15mm bore, (serviceable pipe obtained from item No 53 here-in-before)in new or old situation/alignment of wall, ceiling or floor including provision of all new fittings including discaling/cleaning of pipe (internally and externally) cutting and threading of tubing ends complete all as specified and directed. |
| 56 | All as per item No 55 above, but 20mm dia retreived under Ser item No 54 complete all as specified and directed. |
| 57 | S&F 15mm bore steel water tubing, galvanised, medium grade with all fittings and fixed to wall and ceiling or laid in floor in old/new position complete all as specified and directed. |
| 58 | All as per item No.57 above, but 20mm bore complete all as specified and directed. |
| 59 | S&F in repairs Chromium Plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 60 | S&F in repairs bib tap standard of PTMT, any colour, screwed for iron pipe of size 15 mm and fixed including taking down existing unserviceable bib tap. (minimum weight 90gm) complete all as specified and directed. |
| 61 | S&F in repairs, shower rose of size 125mm, chromium plated with or without swivel jointincluding fixing to steel pipe or union , including taking down existing unserviceable shower rose complete all as specified and directed. |
| 62 | Demolition of concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 63 | M&L for RCC 1:2:4 type B1 (using 20mm graded stone aggregates) as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary form work complete all as specified and directed. |
| 64 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 65 | S&F in repairs vitreous china squatting pan orissa pattern size 580x440mm white with integral foot rest and accessories complete all as specified and directed. |
| 66 | S&F in repairs PVC valveless, syphonic action typeflushing cistern low level, 10 litre capacity with it’s complete accessories, fixed complete incl connection to water pipe and PVC 32 mm dia flush pipe etc complete all as specified and directed. |
| 67 | M&L for PCC 100mm thickcement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in path / hardstanding complete all as specified and directed. |
| 68 | M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. |
| 69 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade complete all as specified and directed. |
| 70 | M&L PCC 1:2:4, type B0 (using 12.5mm graded stone aggregate) as in copings, kerbs and the like incl weathering, slightly rounded or chamfered angles and throating, as directed incl necessary form work as reqd complete all as specified and directed. |
| 71 | Dismantling posts or struts (Wood, Steel or RCC) any section, including taking out embedded portion making good disturbed ground, posts embedded in concrete, brick work, masonry etc. complete all as specified and directed. |
| 72 | All as per serial item No.71 here-in-before but posts embedded in natural ground complete all as specified and directed. |
| 73 | Taking downgalvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings, or any typeand fixed to MS Nibs embedded in precast RCC fencing posts, struts, etc.complete all as specitifed and directed |
| 74 | Excavating in Post holes (or similar holes) each n exc 0.50 cum, getting out, Returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25cm, watering and removing surplus soil to a distance not exc. 50 m and making good surfaces in hard /dense soil complete all as specified and directed. |
| 75 | M&L for Plain Cement Concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, etc., complete all as specified and directed. |
| 76 | S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings, straining, tightening and fixing to MS Nibs embedded in precast RCC fencing posts, struts, etc. securing and tying at crossings with and provision of galvanised mild steel wire complete all as specified and directed. Note: Each line of wire to be measured separately. |
| 77 | S&F for Mild Steel Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including allnecessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165. MS Post and Flat Iron complete all as specified and directed. |
| 78 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long but nexc 10cm long complete all as specified and directed. |
| 79 | M&L for preparation of new or previously untreated steel and iron surfaced of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 80 | Supply only Chainlink MS galvanized febcing any size or type (100mm x 100mm) complete all as specified and directed. |
| 81 | Fixing only chainlink fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc, including provision of binding wire complete all as specified and directed. |
| 82 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 83 | Dismantling fencing wire mesh, chain link fencing, any type complete all as specified and directed. |
| 84 | M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with andincluding mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe 410 W Gde E-250 Quality A or Fe 290 Gde E - 165 complete all as specified and directed. |
| 85 | M&L for preparation of new steel or iron surfaces of any description not exc 10 cm in width of girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 86 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital orsimilarpattern roof coverings complete all as specified and directed. |
| 87 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA asin roof covering/cladding to wall, fixed with L type or J type or cranked hook bolts or fixed with self tapping screws to wooden or steel frame complete all as specified and directed. |
| 88 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA asin roof covering/cladding to wall, fixed with L type or J type or cranked hook bolts or fixed with self tapping screwsto wooden or steel frame complete all as specified and directed. |
| 89 | S&Frolled mild steel roof trusses (framed),trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc(Fe 410-W Gde-E-250 or Fe-310-0) (Including preparation of surface and one shop coat of zinc chromate primer paint) at contractors workshop before fabrication complete all as specified and directed. |
| 90 | Dismantling timber scantling 40 Sqcm and over in section any position as in framed works complete all as specified and directed. |
| 91 | M&L for second class hardwood (SAL) timber scantlings clean sawn complete all as specified and directed. |
| 92 | M&L preparation of new or old wooden surfaces at any description and grith not otherwise described & treating with two coats of creosote oil complete all as specified and as directed. |
| 93 | Taking down carefully old unsv copper /aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures, removing materialsas directed, making good disturbed surfaces of walls with putty, cement and matching the colour of the surface as per existing complete all as specified and directed. |
| 94 | M&L for concealedpoint wiring with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor FRLSH of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal boxsize Suitablefor flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. Note: Cost of making good the disturbed surfaces & matching with the existing surface is deemed to be included in the unit quoted ratescomplete all as specified and directed. |
| 95 | All as per Item Sl No - 94 here in before but for 5 pin, 5/6 A socket point on the independent board complete all as specified and directed. |
| 96 | All as per Item Sl No - 94 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete all as specified and directed. |
| 97 | M&L for point wiringwith two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm FRLSH and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid casing caping (medium grade) with all fittings & accessories including provn of MS sunk terminal box of minimum size75 x75mm fixed flush to wall for mounting switch, socket, fan regulator etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates complete all as specified and directed. |
| 98 | All as per Item Sl No - 97 here in before but for 5 pin, 5/6 A socket point on the independent board complete all as specified and directed. |
| 99 | All as per Item Sl No - 97 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete all as specified and directed. |
| 100 | S & F switch piano flush type single, pole one way, 5 Amp complete all as specified and directed. |
| 101 | S&F ceiling rose, surface bakelite 3/2 terminal complete all as specified and directed. |
| 102 | S & F switch socket combination 5 in 1,5/6Acomplete all as specified and directed. |
| 103 | S & F switch socket combination 5 in 1,15/16Acomplete all as specified and directed. |
| 104 | S&F electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200/1400mm sweep, 120 Watt complete all as specified and directed. |
| 105 | Taking down existing u/s FTL light fitting and S&F in repair decorative box type fitting with LED light fitting 9 watt 2 feet with Al extruded batten luminaire for 230 volt AC complete all as specified and directed. |
| 106 | Taking down existing u/s FTL light fitting and S&F in repair decorative box type fitting with LED light fitting 20 watt 4 feet with Al extruded batten luminaire for 230 volt AC complete all as specified and directed. |
| 107 | Fixing only serviceable light fittings, any type recovered from item No..93 including making necessery end connections with suitable wire all as directed. |
| 108 | S&F MCB, DB, TPN, 4 ways double door, IP-42, IK-09 with metal door, 160 Amp ratedbus bars, earth bar, neutral links complete including blanking plates as required & fixed flush to wall and making good the disturbed surfaces including taking down unserviceable one with MCBs complete all as specified and directed. |
| 109 | All as per item No. 108 here in before but SPN 12 waycomplete all as specified and directed. |
| 110 | All as per item No. 108 here in before but SPN 8 waycomplete all as specified and directed. |
| 111 | S&F MCB, SP, 10KA, 230V, "C" curve, 06-32 A, ISI Marked complete all as specified and directed. |
| 112 | S&F MCB, DP, 10KA, 415V, "C" curve, 06-32 A, ISI Marked complete all as specified and directed. |
| 113 | S&F MCB, TPN, 10KA, 440V, "C" curve, 40/63 Amp, ISI Marked complete all as specified and directed. |
| 114 | M&L for submain wiring in and including casing caping (medium grade) with two single core PVC insulated, FRLSH unsheathed,stranded copper conductorof size 6.0 Sqmm and one single core PVC insulated, FRLSH unsheathed solid copper conductor 6.0 Sqmm green in colour as earthlead including taking down old unserviceablealuminium sub-main wiring complete all as specified and directed by Eng-in-Charge. |
| 115 | M&L for submain wiring in and including casing caping (medium grade) with two single core PVC insulated, FRLSH unsheathed,stranded copper conductorof size 4.0 Sqmm and one single core PVC insulated, FRLSH unsheathed solid copper conductor 4.0 Sqmm green in colour as earthlead including taking down old unserviceablealuminium sub-main wiring complete all as specified and directed by Eng-in-Charge. |
| 116 | S&F energy saving decortaive LED bollard with optical diffuser and aluminium reflector & 8 watt with inbuilt driver, 0.6 mtr height, IP 65 including making necessary fixing on PCC foundation and connection arrangements complete all as specified and as directed. |
| 117 | M&L for earthing complete with galvanized steel earth plate electrode 600x600x 6mm burried directly in ground (in vertical position) earth pit not less then 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L) and connected to galvanized iron earth wire of 4mm dia GI wire with GI protection pipe upto pole junction box by means of bolts, nuts, check nuits, and washer of galvanized iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6 mm round bar, including necessary excavation and earth work in any type of soil, 20 mm dia medIum grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mess, 15mm bore light grade galvanized steel tubing up to 7.5 mtr lenght for drawing earth lead GI wire protection including common salt, charcoal in alternate layers etc. complete all as shown in EP No. 3 of SSR part 1 and testing on completion including taking out old unsv earthing complete all as specified and directed. |
| 118 | S&F energy saving decortaive LED post top lantern with diffuser high power COB light and painted aluminium deflector 35 w asethetically designed IP 65 with base including pipe and making necessary fixing/connection arrangements complete all as specified and as directed. |
| 119 | S&F new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium building security light with high power LED as light source lamp type 25W with SPD , IP:66 protection with fixing rod and connecting arrangements including taking out existing complete all as specified and as directed |
| 120 | S&F new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium building security light with high power LED as light source lamp type 72 with SPD , IP:66 protection with fixing rod and connecting arrangements including taking out existing complete all as specified and as directed |
| 121 | Supply and fixing thermoplastic polycarbonate cable junstion box having protection IP 66"dust proof,acid resistant, shock proof, fire retardent self extinguisher" for outside installation with knockout entry for cable of size 4 sqm 10 coreand 155x210x92mm with terminals, brackets for street light pole mounting and provision of one 6A MCB SP complete all asdirected. |
| 122 | M&L for water proof, 3core PVC insulated and PVC sheathed, copper conductor cable of size 1.5 sqmm, 1100 Volts grade for electrical connection of street light fittings,complete all asdirected. |
| 123 | M&L for replacement of steel tubular swaged poles complete with cast iron base plate, finial taper plug bolts, nuts & screw as specified type 410 SP-31, 9.0 meter long with initial coating of red oxide primer and siliver paint after fixing all as specified anddirected by Engr-in-Charge. |
| 124 | S&F in repair 5 KW three phase automatic street light timer switch for automatic switching on/off street light based on lux level of nature light consisting of sensor overload protection fuse gear, power contactor & MCB of suitbale capacity, terminal blocks for cable netry & control unit enclosed in pole/wall mountable elcosure made out of rust proof, shock proof, termite proof FR grade SMC, conforming to IP 66 with universal lock and key arrangements complete all as specified and as directed by Engr-in-Charge. |
| 125 | Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep soft/loose type of soil getting out and levelling of bottom surface to required level for poles/stay assembly/cable complete all as specified and directed. |
| 126 | Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep hard/dense type of soil getting out and levelling of bottom surface to required level for poles/stay assembly/cable complete all as specified and directed. |
| 127 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed. |
| 128 | Removing excavated material from site to a distance not exc 50mtr away and depositing where directed not exc 1.5mtr from the starting point complete all as specified and directed. |
| 129 | Supplying & Laying in trenches Clear Sand for cushioningunder ground cable 8 cm below and 15 cm above complete all as specified and directed. Note:- Punned thickness shall be meassured. |
| 130 | Supply and laying burnt clay sub class B brick as cable protection complete all as specified and directed. |
| 131 | M&L for PCC 1:4:8 (40 mm graded stone aggregate) Type C2 for base foundation of pole, stay incl form work where reqd complete all as specified and directed. |
| 132 | M&L for PCC 1:3:6 (40 mm graded stoneaggregate) Type C2 for foundation of pole, stay incl form work where reqd complete all as specified and directed. |
| 133 | M&L for PCC (1:2:4) type B-1 coping 20 mm graded aggregate for grouting, finished even and smooth without using extra cement complete all as specified and directed. |
| 134 | M & L for laying LT underground Cable, including takingdown existing unserviceable XLPE insulated, heavy duty armoured sheathed 1100 volts grade 16Sq mm, 4 core, with aluminium conductor, ISI marked as per IS : 7098(Part-1) complete all as specified and directed. |
| 135 | All as per item No 134 above but 10sqmm, 4 core complete all as specified and directed. |
| 136 | M & L GI tubing of 40 mm bore light grade with all fitting fixed to wall/ceiling/pole or in trench formed by road/PCC cutting/boring as cable protection laid on floor complete all asdirected. |
| 137 | M&L for boring holes 1 mtr deep in soil under roads/PCC as directed for cable passing through pipes of required size and disposal of soil to a distance not exc 50m (Note:- Connected items like pipes is measured and paid separately under relavant items) |
Copyright © 2022 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
