Construction Of Mission Shakti Bhawan Block Level Under Balipatna Block In The Dist. Of Khordha For The Year 2021-22
Tender Value
43.79 Lakhs
Estimated cost
Bid Submission
11 Dec 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Balipatna → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Mission Shakti Bhawan Block Level Under Balipatna Block In The Dist. Of Khordha For The Year 2021-22
BOQ
| Sl. No. | Item Description |
| 1 | Civil Works:-Earth work in all kinds of soil within 50m initial lead & 1.5m initial lift including rough dressing of sides and leveling the bed including cost of all labour T & P etc. complete |
| 2 | Supplying and filling in foundation trenches and plinth with coarse river sand well watered and rammed in layers not exceeding 23 cm. in depth with all leads and lifts including cost, conveyance, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 3 | Cement concrete of prop.(1:3:6) in foundation and floors using 4cm. size black hard (crusher broken) granite metal of approved quality from approved quarry including cost, conveyance, royalties and taxes of all materials andall labour,T&P etc complete. |
| 4 | Cement concrete of prop.(1:2:4) in foundation and floors using 20mm to 12mm size black hard (crusher broken) granite chips of approved quality from approved quarry including cost, conveyance, royalties and taxes of all materials andall labour,T&P etc complete. |
| 5 | 25mm thick Cement concrete (1:2:4) including punning and bitumen painting for bearing plaster using12 mm to 20mm size hard granite chips (per Cum) |
| 6 | Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) of 200kg/cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite chips (20 mm. size chips not to exceeds 25 % ) and screened and washed sharp sand for mortar of approved quality from approved quarry to be mixed in concrete mixture including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debrises from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete but excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S.rods or Tor steel tying the grills and placing in proper position as directed by the Engineer in charge. A) Footing |
| 7 | B) Column |
| 8 | C) Plinth Band |
| 9 | D) Lintel |
| 10 | E) 65mm thick Chajja |
| 11 | F) Roof beam |
| 12 | G) Stair case |
| 13 | H) Roof slab- Ground Floor |
| 14 | I) Roof slab- First Floor |
| 15 | Cutting, Straightening coiled or bent up M.S. rods or Tor steel (Fe-500) SAIL make welding or jointing if necessary, bending, binding, tying the grills and laying in position as required for R.C.C. works and hoisting, lowering and placing in position in all floors according to approved designs and drawings including cost, conveyance, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P etc. complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S. rod / Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost) |
| 16 | 20 mm thick grading Cement Plaster(1:4) for foof slab including cost of conveyance royality taxes of all materials and labour T&P etc complete. A) Ground Floor |
| 17 | B) First Floor |
| 18 | Fly Ash Brick Masonryincement mortar (1:6)using Aly Ash bricks in Superstructure of 23cm x 12cm x 8cm having crushing strength not less than 75kg per sqcm with dimentional tolerance +/- 8% including watering, curing and cost, conveyance, royality of all materials & cost of laour charges etc complete. |
| 19 | B)Superstructure( GF ) |
| 20 | C)Superstructure(FF) |
| 21 | Fly Ash Brick Masonryincement mortar (1:4)using Aly Ash bricks in Superstructure of 23cm x 12cm x 8cm having crushing strength not less than 75kg per sqcm with dimentional tolerance +/- 8% including watering, curing and cost, conveyance, royality of all materials & cost of laour charges etc complete. |
| 22 | Backfilling in F&P with excavated materials including watering and ramming as directed by the Engineer-in-Charge. |
| 23 | Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses purlins, frames of doors, widows, ventilator including cost, conveyance, loading, unloading,stacking, royalties, all taxes, cost of all labour, labour cess, T&P etc. complete in all respect as directed by the Engineer-in-Charge (A/R 2016, D.I Cuttack Order no-5262/IND Dt.12.05.2015 |
| 24 | Supplying and fixing W.I Clamps 25cm to 30cm long of 35mm x 5mm size for doors and widows and ventilators including fixing in cement concrete (1:3:6) with12mm to 20 mm hard granite stone chips in cement mortar (1:3) including cost of all materials etc. complete. |
| 25 | Supplying and fixing Flush door 32mm thick including cost, conveyance, royalties and taxes of all materials andall labour,T&P etc complete. |
| 26 | Supplying providing & fixing of PVC Door including cost, conveyance, royalties and taxes of all materials andall labour,T&P etc complete. |
| 27 | Supplying providing & fixing of louvered glass ventilatorin aluminium section including cost, conveyance, royalties and taxes of all materials andall labour,T&P etc complete. |
| 28 | Supplying, fitting and fixing in position M.S. grill of approved design in windows and ventilators made out of20mm. x 6mm. size M.S. flat / 10mm thick square bar including cutting the same to proper sizes, welding, chamfering and one coat of priming with red oxide and fixing with screws as may be required including cost, conveyance taxes of all materials, cost of all labour, sundries and T&P etc. |
| 29 | Supplying,fitting,fixing in position of unplasticized poly vinyl chloride(UPVC) sliding door of FENESTA/NCL or equivalent two track only two glass shutters sliding-60 series/ top hunged ventilator duly manufactured using UPVC reinforced profile of 62 mmx 60 mm x2.25 mm or equivalent for outer frames,66 mmx38 mmx2.25 mm or equivalent for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.2 mm prefabricated and welded through fusion welding and window sash will be 5mm thick clear float glass(toughened) or reputed make duly fixed with EPDM weathering seal registant acessories like clipping locking system made of aluminium 1 no per set ofsashes and the system is to be installed at site by using anchor fasteners,silicon rubber sealant easy glazing/deglazing at site with 10 year manufactures warranty for discoloration,wraping,mechanical failures,shrinkages,rotting,corrosion etc with a quality certificate from relevant department of govt of india. |
| 30 | Supplying, fitting and fixing of vitrified tiles on floorsof approved quality (conforming to IS 13757), shade and 600 x 600mm thick size fixed on 20mm thick C.M (1:4) & filling joints with white cement of approved quality including cost all materials, takes labour T&P etc required for the work. per 1 sqm (Data for 10 sq.mt.) |
| 31 | Supplying, fitting and fixing of Granite slab flooring in staircase including cost, conveyance, royalties and taxes of all materials andall labour,T&P etc complete. |
| 32 | Supplying, fitting and fixing of vitrified tiles on dadoof approved quality (conforming to IS 13757), shade and 600 x 600mm thick size fixed on 12 mm thick C.M (1:3) & filling joints with white cement of approved quality including cost all materials, takes labour T&P etc required for the work. per 1 sqm (Data for 10 sq.mt.) |
| 33 | Supplying, fitting and fixing of Ceramic20cmx30cm &20cmx20cm wall tilesof approved quality thick size fixed on 12 mm thick C.M (1:3) & filling joints with white cement of approved quality including cost all materials, takes labour T&P etc required for the work. per 1 sqm (Data for 10 sq.mt.) |
| 34 | 12 mm thick cement plaster in cement mortar (1:6)to outside wall & finishing smooth to smooth surface of brick walls after raking out the joints including watering and curing, rounding of corners with cost, conveyance, royalties and taxes of all materials and cost of all labour, scaffolding, sundries and T&P. etc. required for the work etc. complete as directed by the Engineer in charge. A) Ground Floor |
| 35 | B) First floor |
| 36 | 16mm thick cement plaster in cement mortar (1:6) finishing smooth to rough surface of brick walls after raking out the joints including watering and curing, rounding of corners with cost, conveyance, royalties and taxes of all materials and cost of all labour, scaffolding, sundries and T&P. etc. required for the work etc. complete as directed by the Engineer in charge.A) Ground Floor |
| 37 | B) First floor |
| 38 | 6mm thick cement plaster to ceiling plaster in cement mortar (1:4) including closed deep chipping with slurry treatment to the R.C.C. surfaces finished smooth including watering and curing, rounding of corners with cost, conveyance, royalties and taxes of all materials and cost of all labour, scaffolding, sundries and T&P. etc. required for the work etc. complete as directed by the Engineer in charge.A) Ground Floor |
| 39 | B) First floor |
| 40 | supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materilas, labour, T&P etc. required for the complete in all respect. |
| 41 | Cement washing one coat to plastered surfaces in all floors at all height including cost, conveyance and taxes of all materials and cost of all labour, curing, scaffolding and T&P. etc. required for the work etc. complete.A) Ground Floor |
| 42 | B) First floor |
| 43 | Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. (per one Sq. Mtr.) (Data for 10 sqm.) INCLUDING COST OF MATERIL&Labour A) Ground Floor |
| 44 | B) First floor |
| 45 | Wall painting TWO coats with plastic emulsion paint over a coat of primmer of approved shade on new work to give an even shade including cost of brushes and putty including cost of paint. (per one Sq. Mtr.) (Data per 10 Sqm.) INCLUDING COST OF MATERIL&Labour A) Ground Floor |
| 46 | B) First floor |
| 47 | Painting two coats of weatherpaint over one coat primer to wall surface wuth approved shade and quality in all floors and all heights including preparing the surface, watering and curing with cost, conveyance, royalties and taxes of all materials and cost of all labour, scaffolding, sundries and T&P. etc. required for the work etc. complete as directed by the Engineer in charge. A) Ground Floor |
| 48 | B) First floor |
| 49 | Painting two coat to wood and/or iron works with enamel paint with one coat primmer of approved shade and quality including sand papering and preparing the surface smooth including cost, conveyance and taxes of all materials and cost of all labour, scaffolding, sundries and T&P etc. required for the work complete as directed by the Engineer in charge |
| 50 | Providing antitermite treatment as per ISI specification including making holes 3\"0\" C/C both way oinject5ing cemical ewith water in propertion 1:20 including cost, conveyance, royalties and taxes of all materials andall labour,T&P etc complete. |
| 51 | Providing fitting fixing of rain water spoutincluding cost of all materials and labour T&P etc complete. |
| 52 | Providing and laying of 60mm thick factory made cement concrete interlocking paver block of M35 grade and approved make variety colour and size made by Block making machin with strong vibratory compaction of approved design and shape, laid in required colour and pattern over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete including cost, conveyance, royality, taxes of all materials, labour, T&P etc. complete as per direction of EIC. |
| 53 | Providing Tar Paper below plinthbend including cost, conveyance, royalties and taxes of all materials andall labour,T&P etc complete. |
| 54 | EI WORKS:-Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V piano type switch ISI marked and ceiling rose ISI marked mounted on MSbox having front bakelitecover of suitable size, MSbox with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL or equivalent). Group-A-L.P-33 |
| 55 | Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V piano type switch ISI marked and ceiling rose ISI marked mounted on MSbox having front bakelitecover of suitable size, MSbox with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL or equivalent). Group-B L.P- 06,F.P-19 |
| 56 | Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V piano type switch ISI marked and ceiling rose ISI marked mounted on MSbox having front bakelitecover of suitable size, MSbox with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL or equivalent). Group-CL.P- 04,F.P- 05,C.B.P- 03 |
| 57 | Pointwiring to 5A /6Amp socket outlet with 2 X 1.5sq.mm FR PVCinsulated single core multistrand copper conductor of ISI marked in recess 20mm dia non-metallic PVC flexible conduit with piano type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor forloop earthing etc. as required. (Make of wire -Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPLor equivalent). Separate |
| 58 | Supply and fixing of 5Amp plug with switch on existing board (Piano type) |
| 59 | Supply and fixing ofmetal box of 200mm X 150mm X 75mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing of 5pin 5/6 & 15/16Amp socket outlet and15/16Amp piano type switches connection painting etc. as required. (Make-Anchor/ Cona/ HPL or equivalent). |
| 60 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulatedsingle core multistrand copper conductoras earth wire as required.(Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL or equivalent). 2 X 2.5 sq.mm +1 X 1.5 sq.mm |
| 61 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulatedsingle core multistrand copper conductoras earth wire as required.(Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL or equivalent). 2 X 4 sq.mm +1 X 1.5 sq.mm |
| 62 | Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulatedsingle core multistrand copper conductoras earth wire as required.(Make of wire-Finolex/ L&T/ Anchor/ Havells/ V-Guard/ HPL or equivalent). 2 X 6 sq.mm +1 X 2.5 sq.mm in 25mm dia |
| 63 | Supply and fixing of superior type Ding Dong call bell / buzzer of ISI marked, conforming to IS-2268/ 1994 (Make-Cona/Anchor or equivalent).Ding dong call bell/ Buzzer with 4\" x 6\" MS board and cover. |
| 64 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/ 1987 in place of ceiling rose . |
| 65 | Supply and fixing of Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required as per the direction of Engineer-in-charge. |
| 66 | Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (Make-HPL/ Havells/ Legrand / L&T/ C&S or equivalent). 6way TPN DB |
| 67 | Supply and fixing of 0.5Amp to 32A rating 240 V \"C\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand / L&T/ ABB or equivalent). 6Amp rating to 32Amp (SP)MCB |
| 68 | Supply and fixing of 0.5Amp to 32A rating 240 V \"C\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand / L&T/ ABB or equivalent). 32Amp rating (DP) MCB |
| 69 | Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993) of following capacity on existing surface / wall mounting and completer with HRC fuse links, interconnections, earthing , etc as required as per direction of Engineer-in-charge. (Make- HPL/ Anchor/ RK/ Hercules/ Benlo or equivalent). 100Amp ICTPN Main switch on MS angle frame |
| 70 | Supply and fixing of Electrolytic Grade(Cu-ETP) (Grade: C 101), coated with Tin and annealed copper bus bar with suitable sheet metal enclosureon MS angle frame with proper grouting on wall including all connections.100Amp TPN bus bar - Electrolytic Grade(Cu-ETP) (Grade: C 101), coated with Tin and annealed 19 X 3mm size copper flat |
| 71 | Supply and Fixing of 21/24 watt surface Mounted Round type LED light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton/ Surya/ Jaquar or equivalent). |
| 72 | Supply and Fixing of90 watt LED street light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton/ Surya/ Jaquar or equivalent). |
| 73 | Supply and Fixing of 18/ 20 wattLED Tube light fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton/ Surya/ Jaquare or equivalent). |
| 74 | Supply and fixing 10 watt LED BH fitting. (Make- Havells/ Phillips/ Bajaj/ Crompton / Surya/ Jaquar or equivalent). |
| 75 | S/F of A.C Ceiling fan 48\" size. (Make-Polycab -Vital / Crompton -Jura/ Havells-Velocity/ Usha-strikeror equivalent). |
| 76 | S/F of Exhaust fan 9\"/10\" size with making hole of required size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton/ Usha or equivalent). |
| 77 | Supply of PVC armored Almn. cablesISI marked.(Make- Glowstar/ Polycab/ Nicco/KEI) 25sq.mm 4core |
| 78 | Cable laying onwall surfacewithsteel shaddle up to 25sqmm (Horizantally) |
| 79 | S/ F of No.8 G.I wire as earth continuity on wall surface/ recess |
| 80 | Supply and fixing of 40mm dia GI Street light bracket. (1mtr long) |
| 81 | Supply and Fixing of Electronic step type Fan regulator. (Make-Cona/ Havells/ Anchor/ Bajaj or equivalent). |
| 82 | S/F of computer board consisting 3 nos 5amp and 1 nos 15amp switch and socket (Piano Type) |
| 83 | Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existingsurface/ recessed/ STEEL / PVC conduit as required. ( For Inverter Wiring) 1X1.5sqmm |
| 84 | S/F of Panel board made out of 18SWG sheet duly powder coated Complete finished box with boarder angle frame to provide proper space for S/F of Switches, Bus bar & Other accessories and fitting of doors with hinges . (size :- 16x12x8) |
| 85 | S/F of Angle Frame for erection. |
| 86 | S/F of Electrolytic Grade(Cu-ETP) (Grade: C 101), coated with Tin and annealed copper Bus bar with copper flat. |
| 87 | S/F of Indicating Lamp with selector switch. |
| 88 | S/F of volt meter with selector switch. |
| 89 | S/F of AMP. Meter with selector switch. |
| 90 | S/F of C.T. coil . |
| 91 | S/F of Neoprene gasket with paste.(weather proof) |
| 92 | S/F of Drum Insulator size:- 32/6 and 40/6. |
| 93 | Supply and fixing of Four pole MCCB with Extented handle and Spreader terminal . (Make- L&T/ Legrand/ ABB or equivalent). 63Amp4pole (25KA) |
| 94 | PH WORKS:-Supplying allmaterials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D- 1785/89 (Sch-80) / CPVC Pipe and pipe fittings of the following nominal borewith clamps including making good the wall , ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. In ground floor.20mm dia C-PVC Pipes |
| 95 | 25mm dia C-PVC Pipes |
| 96 | 40mm dia PVC ASTM Pipes |
| 97 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. In ground floor - 250mmthick wall |
| 98 | Supplying all materials,labour T&P and cutting holels through existing brick or laterite masonry wall for taking H.C.I pipes and fittings including making good the damages etc. all complete as per P.H.Specification and direction of the Engineer in charge.250mm to 375mm thick wall |
| 99 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the Engineer in charge. In ground floor |
| 100 | Supplying all materials, labour T&P and fitting and fixing brass/CP /PVC fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. 15mm CP Bib cock (Jaquar) CON-CHR-037KN |
| 101 | 15mm CP Long body Bib cock (Jaquar) CON-CHR-107KN |
| 102 | 15mm dia CP Angle stop cock (Jaquar) FLR-CHR-5053N |
| 103 | 15mm dia CP Pillar cock (Jaquar) FLR-CHR-5015 |
| 104 | 20mm dia CP Concealed Stop cock (Jaquar) CON-CHR-083KN |
| 105 | 15mm dia CP Two way bib cock (Jaquar) FLR-CHR-5041N |
| 106 | 15mm dia CP Health faucet (Jaquar) ALD-CHR-573 |
| 107 | 25mm dia CPVC Ball Valve |
| 108 | 40mm dia CPVC ball valve |
| 109 | 15mm dia CP flange |
| 110 | 15mm dia CP extension piece |
| 111 | 125mm dia CP gratting |
| 112 | Over head shower (Jaquar) OHS-CHR-1709 |
| 113 | Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.E.W.C. \"S\" trap plain (Parryware/Hindware) |
| 114 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan / Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal all complete as per specification and direction of the Engineer in charge.580mmx440mm size Orissa pan (Parryware/Hindware) |
| 115 | Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer in charge.10 litres capacity PVC LL Cistern (Parryware/Hindware) |
| 116 | Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge. Fixing of squatting urinal(Parryware/ Hindware/Neycer) |
| 117 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make),etc all complete as per specification and direction of the Engineer in charge. 550mmx400mm size Wash hand basin with porcelain pedestal (Parryware/Hondware/Neycer) |
| 118 | Under Counter Wash hand basin (Jaquar) CNS-WHT-WB03 |
| 119 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricantby non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge.110mm dia U-PVC SWR pipe(Supreem/Ashirvad) |
| 120 | 110mm U-PVC Door Tee |
| 121 | 110mm U-PVC Plain Tee |
| 122 | 110mm U-PVC Plain Bend |
| 123 | 110mm U-PVC Door Bend |
| 124 | 110mm U-PVC Cowl. |
| 125 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge. 600mmx450mm size B.E Mirror (fixed type) |
| 126 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to woden plugs with CP screws as per specification and direction of the Engineer in charge600mmx125mm Glass Shelf with CP/NP guard rail |
| 127 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.Fixing 25mmx600mm long CP Towel Rail |
| 128 | CP Towel Ring |
| 129 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.CP Soap Holder |
| 130 | Supplying all materials, labour, T&P and fitting & fixing stainless steel AISI 304 (18/8) Library/Kitchen sink with drain board as per IS 13983 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge.600x450x200 mm stainless steel kitchen sink |
| 131 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering,watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge Fixing 2000Ltr Roto-moulded water storage tanks-In FF |
| 132 | Supplying fitting and fixing 30mm thick PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stile & 15mmx15mm for top and bolt rails set with PVC door frame(Choukatha)of size 50mmx47mm is made out of 5cm thick sheet properly joined with solvent cement adhesive as per section view with MSsquare tube of 19mm of 19mm gauge to be inserted inside to give extra structural strength the price is inclusive of all cost of all materials,labour,T&P etc.complete in all respect as per direction of the Engineer-in-charge. |
| 133 | Supplying all materials, labour, T&P and providing Ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. (Ceramic tile 30cmx30cm Kajaria/Somany/Johnson to be pre-approved by the Engineer in charge) In ground floor |
| 134 | Supplying all materials, labour, T&P and fixing Porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete 45cmx30cm Kajaria/Somany/Johnson plain/printed to be pre-approved by the Engineer in charge) In ground floor |
| 135 | Supplying all materials, labour, T&P and fixing Marble tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. In ground floor |
| 136 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 137 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chipsincluding watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor |
| 138 | Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 139 | Supplying all materials, labour, T&P and providing priming 1 coat with any approved primer all complete as per specification and direction of the Engineer in charge |
| 140 | Supplying all materials, labour, T&P and wall painting 1 coat with plastic emulsion paint of approved shade on old work to give an even shade etc all complete as per specification and direction of the Engineer in charge |
| 141 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, K.B brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat ofneat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Gully trap chamber of size 250mmx250mm with R.C.C cover slab |
| 142 | Supplying all materials, labour, T&P and constructing inspection chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.Inspection chamber Inside size 760mmx760mmx460mm |
| 143 | Supplying all materials, labour, T&P and constructing man hole chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.Man hole chamber Inside size 910mmx910mmx910mm |
| 144 | R.C.P.C.Cover (24\" round) |
| 145 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge .RCC rings soakway pit 1.22m dia x 2.10m deep |
| 146 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasingincluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia u-pvc pipe alround concrete |
| 147 | Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor - In superstructure |
| 148 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 149 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 150 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs, landings, balconies, projecting sunshades and chajjas up to 4.30m height |
| 151 | 30 users Brick Septic Tank-1no. (3.60x2.00x1.80) Mtr. Earth work in hard soil or gravelly soilwithin 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of theEngineer-in-Charge. |
| 152 | Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer in charge. |
| 153 | Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 154 | Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. |
| 155 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 156 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 157 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 158 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 159 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 160 | 200mmx150mm dia Tube Well through DTH Rig.-1no. Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only.Drilling of 200mm dia bore 0mtr to 45mtr |
| 161 | Drilling of 150mm dia bore 41mtr to 120mtr |
| 162 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. Lowering of 200mm dia GI/P.V.C/MS casing pipes 0 mtr to 30 mtrs |
| 163 | Lowering of 200mm dia GI/P.V.C/MS casing pipes 31 mtr to 45 mtrs |
| 164 | Cost of 200mm dia P.V.C schedule-80 pipe |
| 165 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge. By DTH/Rotary Rig |
| 166 | Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department) Sanitary sealing upto 5mtrs below ground level. |
| 167 | CC(1:2:4)with 12mm chips for grouting upto 5 mtr.Depth in sanitary sealing. |
| 168 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials complete as per specification and direction of the Engineer in charge. 40mm dia brass or gun metal Horizontal Non-return valve |
| 169 | Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing, commissioning, trial running,conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.1 H.P single phase 3 stage head range 20 to 35 metres, discharge 145 to 110L.P.M with outlet dia of 25mm Submersible Pump & Motor. |
| 170 | DOL control panel |
| 171 | 2.50sqmm cable |
| 172 | 32mm dia steel short piece |
| 173 | Steel rope with cover |
| 174 | Well cap suitable for 8\" bore well |
| 175 | 50mm size CI bracket |
| 176 | 20mm dia rigid UPVC pipes |
| 177 | 32mm dia rigid PVC ASTM pipes |
| 178 | 40mm dia HDPE pipe |
| 179 | Labour charges for lowering of submesible pumpset with pipes and cables etc. with testing and commissioning at site. |
| 180 | Protection Chamber. Supplying all materials, labour, T&P and constructingBore well protectionchamber of the inside size 650x650x1000hightwith cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ashbrickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4)inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Bore well protection chamber. |
AI Tender Summary
Tender Timeline
Dec 02, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 11, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 13, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender