Military Engineer Services-MES has published Repair To Flooring, Joinery, Plastering And Sanitary Fittings At Ah And Js Enclave At Military Station Sri Gangana Repair To Flooring, Joinery, Plastering And Sanitary Fittings At Ah And Js Enclave At Military Station Sri Gangana. Submission Date for this Tender is 28-12-2021. Civil Work Tenders in GE Sri Ganganagar Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Dec-2021 | amndt1 | BOQ | 21-12-2021 |
| 2 | 21-Dec-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 28-12-2021 |
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site all as specified and directed. |
| 2 | Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters(W/out taking off shutters from the frames). |
| 3 | Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each and removal complete all as specified |
| 4 | Taking down shutters any description exc 1 Sqm but n.exc 2 sqm each, and refixing in the same openingincluding easening and adjusting complete all as specified |
| 5 | S&F for pressed steel frames of size 75 X 60 mm for Cupboard frames with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness ofsheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified. |
| 6 | S&F Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness ofsheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified. |
| 7 | S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness ofsheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified. |
| 8 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed block of hold fast etc complete all as specified and as directed. |
| 9 | S&F in repair2nd class HW factory made Plain, framed, pannelled shutters 35 mm thick (two panels), with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part I) Kiln seasoned and chemically pressure treated all as specified etc complete. |
| 10 | S&F in repair 2nd class hardwoodglazed skeleton shutters 35 mm thick open rebated and prepared to receive guage etc but divided into squares, with plain chamfered or rounded, metered and riveted sash bars any numbers . |
| 11 | M&L forPlain fillets or beading of sectional area Exc3 & n. exc 6sq.cm of 2nd class hard wood square, rectangular or triangular in section , clean sawn, se-cured with nails or brads for securing wiremesh or similar worksput together with glue pinned at joints incomplete all as specified and directed by Engineer - in -Charge. |
| 12 | S&F Solid FRP Door Frame of size 90mm x 45mm with single rebate of 32mm x 15mmto receive shutter moulded with fire retardent grade and saturated polyster resin and choped mat door framed shall be 2 mm thick and fill with suitable block in all the three legs the freme shall be covered with fiber glass rom all side MS stay shall be provided at the bottam to steady the frame . as per specification shown on drawings. |
| 13 | S&F for factory made solid panel FRP door shutter shall be 30mm thick (style) glass fibre reinforced plasticpanel door shutter of requred colour with fire retardent grade and saturated polyster resin moulded to 3 mm thick FRP liminated for forming hollow rails and style with wodden frame and suitable block of seasoned wood inside at reqd places for fixing of fittings cast monolithically with 5 mm thick FRP panel and conforming to IS 14856:2000. suppling and fixing in the frame at site as per specification shown on drawings. |
| 14 | Dismentling of boarding any description fixed in any position with nails/ screws complete all as specified. |
| 15 | S& F 18 / 19 mm thick plywood (12 Nos of ply) grade BWR, typeBB fixed with screwsto timber frame work/steel frame work or ply wood as in cupboard shelf including 3 mm thick teak wood lapping on edge . |
| 16 | M&L for 0.9mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer"s instructions complete all as specified and as directed. |
| 17 | S&F 25 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides as in cupboard shutters fixed to steel/wooden frame complete all as specified and directed by E-in-Charge. |
| 18 | M&L for 18/19mm thick both sideprelaminated (One side decorative and one side plain) particle board exterior grade fixed with screws to timber frame work complete all as specified |
| 19 | S&F 100 mm size stainless steel handlecomplete all as specified and as directed. |
| 20 | S&F Aluminium anodised barrel tower bolts, 100 mm long of extruded section complete all as specified and directed. |
| 21 | S&F Aluminium anodised handles, cast type anodised 100 mm long complete all as specified and directed. |
| 22 | S&F Aluminium anodised 100 mm long, Butt hinges type B-21 with galvanised mild steel screws complete.(as in doors) |
| 23 | S&F Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed. |
| 24 | S&F Aluminium anodised handles, cast type anodised 150 mm long complete all as specified and directed. |
| 25 | S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete. |
| 26 | S&F 250 mm long mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on stapple plate and fixed complete all as specified |
| 27 | S&F 200 mm long mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed. |
| 28 | S&F continuous (piano) hinges 20mm & 12 MM width of flap, mild steel bright finish or electrogalvanised of complete all as specified |
| 29 | S&F 150mm length floor door stopper of aluminium alloy body and tongue,anodised with hard drawan steel spring fixed in floor all as specified, |
| 30 | S & F hasp and staple, safety type of aluminium anodised100mm size fixed with screw complete all as specified and directed by Engineer - in -Charge. |
| 31 | Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n.exc one brick complete all as specified. |
| 32 | S&FAluminium frame for doors, window, ventilatorswith one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge |
| 33 | S&F Aluminium window(glazed and gauzed both),side hung type without sash bars, aluminum section weighing 0.55 Kg/m including necessary joining cleats, glazing, clips, rubber packing, anodised aluminium snap beading screws,aluminium fitting such as peg stays 150mm long (01 nos), hinges type B-21 100mm long (02 Nos) suitable handle (01 No)with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed. Note: Only Glass and wiremesh will be measured and paid seperately. |
| 34 | Alumunium powder coated ventilator including frame and shutter and provision of neccessary rubber gasket for fixing glass panes etc complete all as shown in drawing No CEBT/SK-936 sheet 1/1. Note : Glass panes and wiremesh shall be measured and paid seperately under respectively Items . |
| 35 | S & Fsteel section windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded ( for glazed shutter)complete all as specified and directed by Engineer - in -Charge. Note: Only Glasswill bemeasured and paid seperately. |
| 36 | S & Fsteel section windows with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded ( for gauzed shutter)complete all as specified and directed by Engineer - in -Charge. Note: Only wiremeshwill bemeasured and paid seperately. |
| 37 | M&L for Rubber sheet 50mm wide and of thickeness not less than 3mm fixed with stainless steel screws at the bottom of the door shutters complete all as specified. |
| 38 | S&F Stainlesssteel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed etc., complete all as specified |
| 39 | M & L sheet glass ordinary quality 4 mm thick and glazing with oil putty in square n exc 0.50 Sqm in each panes fixed to steel, metal or wooden window frames complete all as specified. |
| 40 | M & L pin head type, figuredglass 4 mm thick and glazing with oil putty in square n exc 0.50 Sqm in each panes fixed to steel, metal or wooden window frames complete all as specified |
| 41 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified. |
| 42 | S&F Framed work such as grills, gratings coolar stand, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified. |
| 43 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying a coat of red oxide zinc chrome primer andtwo coats of synthetic enamel paint (for steel surfaces) including preparation of surface complete all as specified. |
| 44 | M&L for preparation of new wooden and wood base surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and directed by Engineer-in-Charge. |
| 45 | Roughning of surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc. |
| 46 | M&L for 15 mm thick Screed bed or bedding layer in CM (1:4) complete all as specified.Note : Using only course sand in screed bed. |
| 47 | M&L Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. |
| 48 | M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, cut to reqd size and shape as in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge. |
| 49 | M&L Non skid ceramic cololured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm. in floors etc complete all as specified and directed by Engineer-in-Charge. |
| 50 | M&L Non skid ceramic cololured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm. in skirtingsetc complete all as specified and directed by Engineer-in-Charge. |
| 51 | M&L forNon - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of eachtile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchcomplete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. etc complete all as specified and directed by Engineer-in-Charge. |
| 53 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 54 | M&L for 15 mm thick rendering in cement mortar1:4and finish the surface rough to receive the tile finish etc complete all as specified and directed by Engineer-in-Charge.Note :- Rendering will be done in course sand (Toka sand) only |
| 55 | Dismantling stone slabsof any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge. |
| 56 | M&L marble work (Udaipur green slabs) 18 to 20mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade and roundening to the edge of stone slabs on edgesin single pice of stair case steps in horizental and vertical portion over 15mm thick screed bed etc. complete all as specified and directed by Engineer-in-Charge. |
| 57 | M&L, Machine cut kota stone slab flooring, cills20-25mm thick over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge. |
| 58 | M&L, Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 59 | Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed by Engineer-in-Charge. |
| 60 | Water proofing treatment to sunken slab and adjjoining vertical surfaces as specified under :- (a) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound trowel even and smooth with steel trowel on sunken surfaces(Note : WPC shall be measured and paid separately) (b) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer. (c) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation. (d) Applying second coat of chemical Pidifin 2K (Dr Fixit) @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers. |
| 61 | Supply only Integral water proofing compound ISI marked confirming to IS 2645 - 2003 complete all as specified and directed by Engineer-in-Charge. |
| 62 | M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc complete all as specified and directed by Engineer-in-Charge. |
| 63 | M&L 40 mm GI pipe medium grade, made to shape as in spout pipe in sunken/ verandah/ Balcony complete all as specified and directed by Engineer-in-Charge. |
| 64 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge. |
| 65 | M&L for PCC (1:3:6) type C-2 (using 40mm graded agg) 100mm thick as in subbase floors, pavings, e.t.c . |
| 66 | M&L for PCC (1:2:4) type B-1, 25mm thick as in floors,pavings e.t.c finished even and fair complete all as specified and directed by Engineer-in-Charge. |
| 67 | Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ceiling complete all as specified and directed by Engineer-in-Charge. |
| 68 | Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/centrings complete all as specified and directed by Engineer-in-Charge. |
| 69 | S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed by Engineer-in-Charge. |
| 70 | S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and directed by Engineer-in-Charge. |
| 71 | Ditto- but refixing 15 mm dia ,old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified and directed by Engineer-in-Charge. |
| 72 | Ditto- but refixing 20 mm dia ,old steel tubing and connections in new or old possition (wall,ceiling and floors etc) complete all as specified and directed by Engineer-in-Charge. |
| 73 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth.In brick walls complete all as specified and directed by Engineer-in-Charge. |
| 74 | Dismantling water tanks of any description exc 250 and n.exc 500 ltrs capacityand removal from site complete all as specified and directed by Engineer-in-Charge. |
| 75 | M&L for providing cement concrete 1:2:4 Type B1 using 20 mm graded aggregate for platforms of water tanks on roof, as in coping, benching kerb concrete etcincluding weathingslightly rounded or chamfered angles and throating including necessary formwork etc complete all as specified and directed by Engineer-in-Charge. |
| 76 | S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as per specified and directed. |
| 77 | Dismantling and Refixing old 500 Ltrs capacity Rotational moulded polyethylen water storage tankafter cleaning and removing all scale and dirt etc from tanks and from mouths of cirulating pipes etc complete all as specified and directed by Engineer-in-Charge. |
| 78 | S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed.(Minimum weight 20mm - 210 gms) etc complete all as specified and directed by Engineer-in-Charge. |
| 79 | S&F20mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. |
| 80 | S&F 15mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge. |
| 81 | S&F in repair 15 mm dia bore fancy type chromium plated bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and directed by Engineer-in-Charge. |
| 82 | S & F in repairs 15 mm dia bore fancy type chromium plated concealed stop valves of cast copper alloy with long shank & cup etc. complete all as specified and directed by Engineer-in-Charge. |
| 83 | S & F in repair 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge. |
| 84 | S & F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified and directed by Engineer-in-Charge. |
| 85 | S&F stainless steel plate racks of size 900mm x 600mm x 250mm and thickness of SS strip of 1mm fixed on wall etc complete all as specified and directed by Engineer-in-Charge. |
| 86 | S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe including 40mm dia CPBrass waste fitting amd waste pipe overall size of SS sink495mm x 420mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and directed by Engineer-in-Charge. |
| 87 | S&F in repair wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by Engineer-in-Charge. |
| 88 | S&F in repair corner wash hand basin of size 450 x 390 mm vitrous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by Engineer-in-Charge. |
| 89 | S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engineer-in-Charge. |
| 90 | S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, Plastic water closet seat cover, white, closed pattern with flat bottom, and cover with aluminised hinging device, brass chromium plated Jet shower with one meter long flexible pipe including all connection complete all as specified and directed by Engineer-in-Charge. |
| 91 | S&F in repair brass chromium plated jet spray fitting with chrome plated 1.5 mtr long extendable, flexible tube, fixed to EWC complete all as specified and directed by Engineer-in-Charge. |
| 92 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positioncomplete all as specified and directed by Engineer-in-Charge. |
| 93 | S & F in repair PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed by Engineer-in-Charge. |
| 94 | S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and directed by Engineer-in-Charge. |
| 95 | S&F in repair PVC bathroom cabinet mirror of size 450x350mm all as specified and directed by Engineer -in-charge |
| 96 | Taking down rain water pipe and eaves gutters(any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engineer-in-Charge. |
| 97 | S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed by Engineer-in-Charge. |
| 98 | S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoefixed to PVC pipes complete all as specified and directed by Engineer-in-Charge. |
| 99 | S & F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays for 100mm bore of pipe, including bolts and nuts and securing ends of stays to wall or roof etccomplete all as specified and directed by Engineer - in -Charge. |
| 100 | M&L for 25mm dia fancy type PVC coatedMS Pipe coloured curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing curtain rods any description with accessories complete all as specified and directed.Note : The cost of brackets and knobs is deemed to be included in the quoted rate.Nothing extra shall be paid on this account. |
| 101 | Dismantling and disconnecting existing CI soil waste/vent pipe 100 mmbore fixed to wall,laid in trenches incl all fittings & accessoriescomplete all as specified and directed by Engineer-in-Charge. |
| 102 | Dismantling and disconnecting of existing CI soil waste/vent pipe 75 mmbore fixed to wall,laid in trenches incl all fittings & accessoriescomplete all as specified and directed by Engineer-in-Charge. |
| 103 | S&F 100mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls & fixing with clamps complete all as specified and directed by Engineer-in-Charge. |
| 104 | S&F75mm dia Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but laid in trenches / floors complete all as specified and directed by Engineer-in-Charge. |
| 105 | S&F 100 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed by Engineer-in-Charge. |
| 106 | S&F 75 bore, CI bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairscomplete all as specified and directed by Engineer-in-Charge. |
| 107 | M&L for 75mm dia of long neck CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed by Engineer-in-Charge. |
| 108 | M&L Branch pieces, 100 mm bore, (equal or unqual), ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed by Engineer-in-Charge. |
| 109 | M&L Branch pieces, 75 mm bore, (equal or unqual), ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed by Engineer-in-Charge. |
| 110 | M&L Bends suitable for 100mm dia CI pipewith duck"s foot or heel rest as in repairscomplete all as specified and directed by Engineer-in-Charge |
| 111 | M & L for Salt-glazed stoneware gully traps of size 150 x 150 mm, square or round mouthed, type "P"complete all as specified and directed by Engineer-in-Charge. |
| 112 | S&F in repairs CI cowls 100 mm complete all as specified and directed by Engineer-in-Charge. |
| 113 | Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 114 | M&L for rendering 15 mm thick in patches in cement mortar1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cementcomplete all as specified and directed by Engineer-in-Charge. |
| 115 | M&L for rendering 15mm thick in patches in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 116 | M&L for rendering 5mm thick in cement mortar in 1:3 on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 117 | M&L for complete removal of existing treatment of old surface including brooming down / steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spoutes and cleaning with water on wall complete all as specified and directed by Engr-in-charge. |
| 118 | M&L for wall care putty in two coats on old internal wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as specified and directed complete and applying two coat of Oil Bound distemper of approved tint over a coat of primer on old prepared surface by using Airless spray / Roller over complete all as specified & directed. Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible |
| 119 | M&L for prepration of New plastered Internalwall surface completeapplying the following :- (a)M&L wall care putty in two coats on wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified (b)M&L two coat of Oil Bound disttemper over a coat of chalk whitening priming by using Airless spray / Roller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible |
| 120 | M&L forpreparation of new plaster surfaces of ceiling and applying two coat of white wash complete all as specified and directed by Engineer-in-charge.. |
| 121 | M&L for complete removal of existing treatment including filling depression of scraped surface with wall putty two coats 1.5 mm thick each on Old external wall surfaces of any desciption , prepratio of surface by Mechanised sander having suction vaccum Bag using Smart periodical methodology , complete all as specified and applying the following :- (a) M&L two coats of exterior acylic emulsion by using Airless spray / Roller over and incl a coat of acrylic emulsion external primer complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of where using of Mechanical equiment are not posiible |
| 122 | M&L for preparation of old surface including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and smooth andcompleteand then appplyingtwo coats of white wash on old decorated plastered or un-plastered surfaces of walls etc all as specified & directed by Engineer-in-Charge. |
| 123 | M&L for preparation of old painted surfaces includingas knotting, stopping, Burning off or removing, scraping etc,and then applying one coat of synthetic enamel paint (ordinary tint) on steel surfaces over 10cm width or girthcomplete all as specified and directed by Engineer - in -Charge. |
| 124 | M & L for applying one coat of synthetic enamel paint on wood and wood based surfaces of any description, over 10cm width or girth, not other wise described including preparation of old painted surfaces |
| 125 | Dismantling of brickwork built in cement mortar of any description complete all as specified and directed as per Engineer-In-Charge |
| 126 | M&L brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in -Charge. |
| 127 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint,over a coat of white wash complete all as specified and directed by Engineer-in-Charge. |
| 128 | M&L for welding in repairs Thickness of metal to be weldedwill beExc 9 mm but not exc 20mm complete all as specified and directed by Engineer - in -Charge. |
| 129 | Note : Notes : (i) Amount ofcredit for retrieved materials is mentionedin Sch "A" Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
