Provn Of Tiles In Smqs, Addn / Altn To Bldg No- T-95 And Dss Hut, Road Furniture At Begumpet And Certain Revenue Works At Caw Area Under Ge ( Af ) Hakimpet Provn Of Tiles In Smqs, Addn / Altn To Bldg No- T-95 And Dss Hut, Road Furniture At Begumpe
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Dec 2021
0 days left
EMD
92600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
BEGUMPET → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provn Of Tiles In Smqs, Addn / Altn To Bldg No- T-95 And Dss Hut, Road Furniture At Begumpet And Certain Revenue Works At Caw Area Under Ge ( Af ) Hakimpet Provn Of Tiles In Smqs, Addn / Altn To Bldg No- T-95 And Dss Hut, Road Furniture At Begumpet And Certain Revenue Works At Caw Area Under Ge ( Af ) Hakimpet
BOQ
| Sl. No. | Item Description |
| 1 | Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in any type of soil etc., complete. |
| 2 | M&L for hard core of guage exc 63 mm but n.exc 100 mm deposited spread,l levelled in layers n.exc 15 cm thick watered and rolled/rammed to a true Surface with brokenboulders or stomes of 75mm thick |
| 3 | M&L forP.C.C 1:4:8 type D2 using 40 mm grdeded aggregate as in sub base 75mm thhick |
| 4 | M & L 15mm thick CM 1:6 Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes etc complete |
| 5 | M & L chequered cement concrete tiles with grey cement and pigment300x300x25 mm thick, jointed and pointed in neat cement slurry in floors etc complete |
| 6 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep and getting out in hard dense soil for foundations etc. |
| 7 | All as per item No. above, but depth exc 1.5 m and n.exc 3 m. |
| 8 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils. |
| 9 | Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed of soil |
| 10 | Demolition of concrete in ground floor and pavingnexc 15cm thickness (below or above ground level) and removed debris outside MOD land. |
| 11 | Demoliation Concrete of any description and in any position of any description and in any position not otherwise specifically provided for un reinforced and removed debris outside MOD land. |
| 12 | Demoliation Concrete of any description and in any position of any description and in any position not otherwise specifically provided forreinforced concrete and removed debris outside MOD land. |
| 13 | M & L forPlain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete. |
| 14 | M & L for PCc block masonry type C1 1:3:6 (20mm graded aggregate set in CM 1:4 block masonry with solid blocks exc 10 cm width and setting in mortar complete |
| 15 | M&L for RCCtype A1 1:1.5:3 (20mm graided aggregate) Slabs supported on walls, beams and columns in floors,roofs landings, culverts, deck slabs, shelvesetc complete. |
| 16 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), beams etc., fair finish surfaces |
| 17 | Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all n. exceeding 20cm wide. |
| 18 | M&L for Precast reinforced cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate ) for manhole cover , septic tank covers slabs etc including necessary from work and set in CM (1:4) .Note :- reinforcement will measured and paid seperately. |
| 19 | M & L Cement concrete Type B1 1:2:4 in surface channels and drains |
| 20 | S&F MS TMT bars 10 mm dia and over cut to length bent to shape required including cranking , bending hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia complete all specified and as directed. |
| 21 | All as per item No. above, but 5 to 10 mm dia as in stirrups, spacers etc. |
| 22 | S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 |
| 23 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 24 | M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match joint free teles. |
| 25 | M & L sheet glass exc 0.5 sqm in each plane selected quality for wall particion and urinal partician 10mm thick and obscured or frosted as directed by engineer- in-charge. |
| 26 | M&L for10mm thick rendering in CM 1:4 on brick or concrete surfaces as in backing coat to receive tile finish as in skirting and dados |
| 27 | M&L for glazed ceramic coloured tiles in vertical surfaces 300x400x7mm thick /450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 28 | S&F Anodised alluminium snap grid 605mmx605mm frame work for false ceiling, hangers made of 6 mm dia GI (up to 1.2 m length) adjusting level fixed to roof slabs by means of ceiling cleats made up of GI flat 40x3mm size 60 mm long fastener with 19 mm thick amstrong altima board forinsulation and acoustic purposes, 60 x 60 cm in size, fixed with screws or with staples on snap grid in ceiling complete all as specified and directed.Make : Armstrong |
| 29 | Taking up & down steel tubing & connections including cleaning for refixing or removal to store 15mm dia |
| 30 | Taking up & down steel tubing & connections including cleaning for refixing or removal to store 20mm dia |
| 31 | S&F 15mm dia steel water tubing medium grade galvanised with all fittings & fixed complete to walls & ceilings or laid in floors. |
| 32 | S & F, 20mm dia. steel water tubing \"medium grade\"galvanised, with all fittings & fixed complete to walls & ceilings or laid in floors. |
| 33 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including 10 ltrs PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern and Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.Make: Jaquar brand 1st quality code CNS-WHT-553SS |
| 34 | S & F, in repairs Vitreous china wash basin,wall mounted white, flat back, size 760X500X215mmMAKE Jaquar code no CNS-WHT-807 complete. |
| 35 | S & F, vitreous china flat back urinal, white, flat back, size of 355x345x535mm, with grating & union for discharge pipe, complete inc. providing & fixing plugs, bedding urinal against wall in CM 1:2, inc. 60mm long brass screws, pointing around urinal back in cement, completejaquar brand 1st quality code no URH-WHT 13261 |
| 36 | S&Fin repairs fancy type Stop valves/angle valve, 15 mm bore of pipe, cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed make Jaquar |
| 37 | S&F in repairschromioum plated fancy type 15 mm dia Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule make jaquar. |
| 38 | S& Fin repairs fancy type Pillar taps 15mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed make jaquar |
| 39 | S&F20mm dia tubular towel rail brass CP `D`type , 60 cm long between flanges including one pair of brackets all asspcefied. |
| 40 | S&F vitreous china soapdish white of size 160x160x90mm as approved fixed with brass screws or embeded in wall complete all as specified and directed make Jaquar. |
| 41 | S & F CP urinal spreader make jaquar fancy type |
| 42 | S&F of 600mm x 450 mm bevelled edge mirror of selected quality glass 5.5mm thick or more,fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 43 | S&F in PVC (SWR) floor trap incl grating, set and jointing with salvent cement 75mm dia |
| 44 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls. |
| 45 | S & F 110 mm bore PVC (SWR) bends of any radius. |
| 46 | S & F Tuwel PVC connection 15mm size with PTMT nuts of length 450mm long. |
| 47 | S&F grating doom 100mm dia of mild steel without hole (minimum wt 25 Gms) |
| 48 | S & F CP heath faucet with pipe and hand shover the length of hose 1 mt fitted to the tap complete all as specified make Jaquar 1st quality |
| 49 | S & F CPUrinal spreader complete all as specified make Jaquar 1st quality |
| 50 | S&F SS Toilet Paper holder with flap complete all as specified and as directed Make jaquer |
| 51 | Taking down cement plastering on concrete/masonary surfaces including racking out joints hacking for keys and scrubbing down with water and removed debris outside MOD land. |
| 52 | M&L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaceincluding finishing the surface even and smooth without using extra cement |
| 53 | M&L for preparing new plastered surfaces of walls and applying three coats of white washing all as specified and as directed. |
| 54 | M&L for Preparing new plastered surfaces of walls and applyingtwo coats of distemper oil emulsion over one coat of alkali resistant primer all as specified and as directed. |
| 55 | Demolition of brickwork or stone boulder masonry built in cement or cement lime mortar |
| 56 | M & L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 57 | S & F GIbird mesh at hanger in patches made of \"Antibird net UV black in colour made of mateiral polyolefin all-weather proof co-polymer of machine knotting using CNC machines with DSLS technology for anti-slip knotting, heat setting should be steam set for greater dimensional stability and knot firmness and diameter of the twine is 1mm and the size of mesh 25 mm x 25 mm (+/- 2 mm) and should achieve twine breaking strength of 16kgf minimum and MBS (mesh breaking strenght) 12kgf and KBS (knot breaking strenght) 22 kgf minimum fixed complete all as per manufacutrers instruction and as directed. Note:- Bird proofing shall be fixed in patches wherever required at hangar ceiling all as directed and as per manufacuters instructions.Make: Leo Technova India or equivalent . |
| 58 | S&F Powder coated Anodised aluminium frame for doors, windows, ventilators, Partition wall with one or more rebates including joining cleat for fixing etc complete all as specified. |
| 59 | S&F 5.5 mm thick ordinary quality glass and glazing with rubber gasket fixed to aluminium frame work in squares exc 0.50 Sqm in each pane all as directed. |
| 60 | M&L prelaminated particle board 9mm thick interior grade both side with decorative choice lamination fixed withscrews to aluminium frame work. |
| 61 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. |
| 62 | Reinforced Cement Concrete Type A1 1:1.5:3 (using 20 mm graded granite stone aggregate) in Beams, cantilevers, lintels over 1.5 M span. |
| 63 | M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement. |
| 64 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 ,finished even and smooth without using extra cement |
| 65 | M&L for preparing new plastered surfaces and applying Two coats of cement base paint over a coat ofprimer on surfaces of walls. |
| 66 | M & L 25 mm thick PCC 1:2:4 type B1 (Using 20mm graded granite stone aggregate) in sub base of floorings. |
| 67 | Dismantling AC corrugated, semi corrugated sheets in roof covering complete all as specified and directed. |
| 68 | S & F Rolled Mild Steel sections confirming to Fe 410 - W (Gde E-250)quality-A, as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates |
| 69 | M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed. |
| 70 | M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 71 | S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridges fixed with self tapping screws all as specified and directed. |
| 72 | S&F anodised aluminium snap grid of size 605 mm x 605 mm frame work for false ceiling and providing and fixing Gypsum Board 12mm thick in ceiling fixed to aluminium snap grid frame as per manufacturers instructions and Preparingof ceiling boards and applyingtwo coats of distemper over a coat of suitable primer complete all as specified and as directed.Note- The rate quoted shall be deemed to be included for taking down and refixing of Light and Fan in position and extention of fan rod all as directed. |
| 73 | S&F in Double arm wall mounted reversible plain/Magnifying (X3) Pivoted mirror Make -Jaguar Cat No ACN-1193N |
| 74 | S & F wall mixture 3 in 1 system with provision for hand shower and over head shower complete with 115mm long bend pipe,connecting legs &wall flange with hand shower make-Jaguar Cat NO FLR-5281N |
| 75 | S & F in repairs over head shower 150 mm dia round shape single flow brass body chrome plated with grey face plate with self cleaning function Make Jaguar Cat No OHS-1801 |
| 76 | S&F Soap Dispenser with glass bottle Make -Jaguar cat No-AKP-35735P |
| 77 | S&F Under counter Basin oval shape with fixing Accessories ste of size 595 x 420 x 200 mmmakeJaqur CNS-WHT-705 |
| 78 | S&F CP single Lever Extended Basin mixer (height 95 mm) with popup waste system with 450 mm long braided hoses s Make JaguarCAT No FON-40023B |
| 79 | S/F CP Angular stop cockwith wall flange 15mm Mk: JaguarCat No OPP-15053PM |
| 80 | S&FSS toilet paper holder with flap make JAGUOR code no.Ahs 1553 |
| 81 | S/F Stainless steel towel ring squareMk: Jaguar Cat No 35721P |
| 82 | S/F Soap dish holder Mk : Jaguar cat No 35731P |
| 83 | S & F towel Rack with lower hanger (stainless steel) with hook Make- jaguar Cat No AHS-1581H |
| 84 | S/F CP 2 way bib cockwith wal flange. Mk JaguarCat No-KUP-35041PM |
| 85 | S & F mirror cabinet of size 622x422mm Make prayag Cat No-555 |
| 86 | S/F Health faucet Hand showert with 8mm dia,1.2 mtr Long flexible tubes & wall hook Make Jaguar Cat No-ALD-573 |
| 87 | S&F Single piece WC with PP soft close seat cover,Hinges,Fixing Accessories and Accessories set,Cistern fittings,S trap-300 of size 360 x 640 x 680 mm S trap -220mmJaguar Cat No SLS-WHT-6855S |
| 88 | S&F Chrominum plated heavy duty coat hook having 2 Nos of hooks fixed in the existing door with necessary screws etc. Make 35761 of Jaguar or equivelant in Hindware/Cera. |
| 89 | S/F looking mirror of any sizerectagular fancy type having bevelled boarders of glass fixed to walls with stud pins.Make prayagcomplete all as specified by engineer in charge. |
| 90 | M& L for 25mm dia SS Curtain rod fancy type complete all as specified and directed |
| 91 | M&L for brackets, End cap and holder suitable for 25mm dia SS curtain rod fancy type complete all as specified and as directed |
| 92 | S & F Kristall Trend Corner entry shower enclosure with door with sliding to both sides-4 parts glass 6 mm thick finish -Chrome of size Height 1850 x 1200 x 1200Jaguar Cat No BKT-CHR-31651200X |
| 93 | S&F PVC conniction 15mm size with PTMT nuts of length 450mm |
| 94 | S & F 75 mm bore PVC (SWR)pipes single socketed in any length with rubber ring joints laid in floors or trenches or walls |
| 95 | S & F 75 mm bore PVC (SWR) bends of any radius. |
| 96 | S & F CI 100 mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) |
| 97 | S & F PVC (SWR) ventcowls 75 mm bore. |
| 98 | M & L for 75 mm thick PCC (1:3:6) type C2 using 20mm graded stone aggregate as in plinth protection/hard standing etc complete all as specified finished smooth and even using extra cement. |
| 99 | Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed size of 165x60mm complete all as spedified and directed. |
| 100 | M&L PCC 1:3:6 type C1 (20mm gr agg) as in anchoring hold fast, in pressed steel door frame bed plate etc all as specified and directed. |
| 101 | S & F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, with decorative face veneers on both faces with lipping to match. |
| 102 | S & F Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed 16mm dia , 300mm long |
| 103 | S & F Brass handles, cast type, polished bright150mm |
| 104 | S & F 125 mm long medium weight, cold rolled mild steel Butt hinges. |
| 105 | S & F 150mm Brass barrel tower bolts, with cast or sheet barreland rolled or cast bolts of extruded section and fixed |
| 106 | S & F Anodised aluminium window and ventilator shutters, powder coated of any colour side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 107 | M&L for Granite(of any type) work (table rubbed and polished) of 20 mm thin steps, jambs, pillars, window- cills,cooking platforms and like overcement mortarincluding pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade |
| 108 | S & F Second class hard wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 and not exceeding 25 Sq. cm |
| 109 | S&F of 18mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face; fixed with screws |
| 110 | S&F teak wood lipping, 6mm thick fixed with nails 18 mm thick all as specified and directed |
| 111 | M&L for 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instructions |
| 112 | S&F of 75 mm Brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed |
| 113 | S&F of 100 mm long chromium plated brass handles fancy type all as specified and directed |
| 114 | S&F of Cup board lock brass 4 levers all as specified and directed |
| 115 | S&F of Stainless steel auto closing cup-board hinges |
| 116 | M & L for Cement concrete type C-2 1:3:6using 40mm graded crushed stone aggregates 75mm thick as in flooring finished even and fair. |
| 117 | M&L for 20 mm thick screed bed or bedding layer in CM 1:6 for layingof floor finish. |
| 118 | Removing excavated material to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5 m above the starting point. |
| 119 | M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring benching to drain, coping, bed block etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and as directed. |
| 120 | Providing & Fixing of Cautionary / warning Sign Board of size 900 x 600 mm made out of Type-XI of ASTMD-4956-09 High Intensity Prismatic retro reflective sheeting and conforming to IRC 67:2012 for full background of White colour & letters/logos done by screen printing in black colour,borders by screen printing in red colourfixed over 4 mm Aluminium Composite Material sheet having minimum 0.4 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back suport frame of 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 mtr from the ground levelthe bottom of the board. The signpost shoud be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and White colour with bands of 30 cm of height .The signpost shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift,loading charges necessary for satisfactory completion of the work as directed by Engineer -in- Charge are complete item in all respects as per MORTH Spn (5th revision) cl.801. |
| 121 | Providing & Fixing of Cautionary / warning Sign Board of size 914x 736mm made out of Type-XI of ASTMD-4956-09 High Intensity Prismatic retro reflective sheeting and conforming to IRC 67:2012 for full background of White colour & letters/logos done by screen printing in black colour,borders by screen printing in red colourfixed over 4 mm Aluminium Composite Material sheet having minimum 0.4 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back suport frame of 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 65x65x6mm with clear height of not less than 2.1 mtr from the ground levelthe bottom of the board. The signpost shoud be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and White colour with bands of 30 cm of height .The signpost shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift,loading charges necessary for satisfactory completion of the work asdirected by Engineer -in- Charge are complete item in all respects as per MORTH Spn (5th revision) cl.801. |
| 122 | Providing & Fixing of Cautionary / warning Sign Board of size 600mm equilateral triangle made out of Type-XI of ASTMD-4956-09 High Intensity Prismatic retro reflective sheeting and conforming to IRC 67:2012 for full background of White colour & letters/logos done by screen printing in black colour,borders by screen printing in red colourfixed over 4 mm Aluminium Composite Material sheet having minimum 0.4 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back suport frame of 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 63x63x6mm with clear height of not less than 2.1 mtr from the ground levelthe bottom of the board. The signpost shoud be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and White colour with bands of 30 cm of height .The signpost shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift,loading charges necessary for satisfactory completion of the work asdirected by Engineer -in- Charge are complete item in all respects as per MORTH Spn (5th revision) cl.801. |
| 123 | Providing & Fixing ofCautionary / warning Sign Board of size 600 x 600 mm made out of Type-XI of ASTMD-4956-09 High Intensity Prismatic retro reflective sheeting and conforming to IRC 67:2012 for full background of White colour & letters/logos done by screen printing in black colour,borders by screen printing in red colourfixed over 4 mm Aluminium Composite Material sheet having minimum 0.4 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back suport frame of 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 63x63x6mm with clear height of not less than 2.1 mtr from the ground levelthe bottom of the board. The signpost shoud be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and White colour with bands of 30 cm of height .The signpost shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift,loading charges necessary for satisfactory completion of the work as directed by Engineer -in- Charge are complete item in all respects as per MORTH Spn (5th revision) cl.801. |
| 124 | Providing & Fixing of Place Identification Sign Board of size 2400 x 1200 mm made out of Type-XI of ASTMD-4956-09 High Intensity Prismatic retro reflective sheeting and conforming to IRC 67:2012 for full background of Blue colour & white Letters/logos and fixed over 4 mm Aluminium Composite Material sheet having minimum 0.4 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back suport frame of 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 mtr from the ground levelthe bottom of the board. The signpost shoud be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and White colour with bands of 30 cm of height .The signpost shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift,loading charges necessary for satisfactory completion of the work as directed by Engineer -in- Charge are complete item in all respects as per MORTH Spn (5th revision) d.801. |
| 125 | Providing & Fixing of Place Identification Sign Board of size 1200 x 900 mm made out of Type-XI of ASTMD-4956-09 High Intensity Prismatic retro reflective sheeting and conforming to IRC 67:2012 for full background of Blue colour & white Letters/logos and fixed over 4 mm Aluminium Composite Material sheet having minimum 0.4 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back suport frame of 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 mtr from the ground levelthe bottom of the board. The signpost shoud be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and White colour with bands of 30 cm of height .The signpost shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift,loading charges necessary for satisfactory completion of the work as directed by Engineer -in- Charge are complete item in all respects as per MORTH Spn (5th revision) cl.801. |
| 126 | Providing & Fixing of Place Identification Sign Board of size 1800 x 1200 mm made out of Type-XI of ASTMD-4956-09 High Intensity Prismatic retro reflective sheeting and conforming to IRC 67:2012 for full background of Blue colour & white Letters/logos and fixed over 4 mm Aluminium Composite Material sheet having minimum 0.4 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back suport frame of 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 mtr from the ground levelthe bottom of the board. The signpost shoud be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and White colour with bands of 30 cm of height .The signpost shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift,loading charges necessary for satisfactory completion of the work as directed by Engineer -in- Charge are complete item in all respects as per MORTH Spn (5th revision) cl.801. |
| 127 | Providing & Fixing of Cautionary / warningSign Board of size 1200 x 600 mm made out of Type-XI of ASTMD-4956-09 High Intensity Prismatic retro reflective sheeting and conforming to IRC 67:2012 for full background of White colour & letters/logos done by screen printing in black colour,borders by screen printing in red colourfixed over 4 mm Aluminium Composite Material sheet having minimum 0.4 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back suport frame of 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 mtr from the ground levelthe bottom of the board. The signpost shoud be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and White colour with bands of 30 cm of height .The signpost shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift,loading charges necessary for satisfactory completion of the work as directed by Engineer -in- Charge are complete item in all respects as per MORTH Spn (5th revision) cl.801. |
| 128 | Providing & Fixing of Cautionary / warning Sign Board of size 431 x 431 mm made out of Type-XI of ASTMD-4956-09 High Intensity Prismatic retro reflective sheeting and conforming to IRC 67:2012 for full background of White colour & letters/logos done by screen printing in black colour,borders by screen printing in red colour fixed over 4 mm Aluminium Composite Material sheet having minimum 0.4 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back suport frame of 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 65x65x6mm with clear height of not less than 2.1 mtr from the ground levelthe bottom of the board. The signpost shoud be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and White colour with bands of 30 cm of height .The signpost shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift,loading charges necessary for satisfactory completion of the work as directed by Engineer -in- Charge are complete item in all respects as per MORTH Spn (5th revision) cl.801. |
| 129 | Providing & Fixing of Place Identification Sign Board of size 900 x 600 mm made out of Type-XI of ASTMD-4956-09 High Intensity Prismatic retro reflective sheeting and conforming to IRC 67:2012 for full background of green colour & white Letters and fixed over 4 mm Aluminium Composite Material sheet having minimum 0.4 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back suport frame of 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 mtr from the ground levelthe bottom of the board. The signpost shoud be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and White colour with bands of 30 cm of height .The signpost shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift,loading charges necessary for satisfactory completion of the work as directed by Engineer -in- Charge are complete item in all respects as per MORTH Spn (5th revision) cl.801. |
| 130 | Providing & Fixing of Cautionary / warning Sign Board of size 600 x 600 mm made out of Type-XI of ASTMD-4956-09 High Intensity Prismatic retro reflective sheeting and conforming to IRC 67:2012 for full background of Red Colour& white Lettersand fixed over 4 mm Aluminium Composite Material sheet having minimum 0.4 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back suport frame of 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 mtr from the ground levelthe bottom of the board. The signpost shoud be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and White colour with bands of 30 cm of height .The signpost shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift,loading charges necessary for satisfactory completion of the work as directed by Engineer -in- Charge are complete item in all respects as per MORTH Spn (5th revision) cl.801. |
| 131 | Providing & Fixing of Place Identification Sign Board of size 600 x 600 mm made out of Type-XI of ASTMD-4956-09 High Intensity Prismatic retro reflective sheeting and conforming to IRC 67:2012 for full background of Red Colour& white Letters and fixed over 4 mm Aluminium Composite Material sheet having minimum 0.4 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back suport frame of 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 mtr from the ground levelthe bottom of the board. The signpost shoud be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and White colour with bands of 30 cm of height .The signpost shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift,loading charges necessary for satisfactory completion of the work as directed by Engineer -in- Charge are complete item in all respects as per MORTH Spn (5th revision) cl.801. |
| 132 | Providing & Fixing of Place Identification Sign Board of size 300 x 600 mm made out of Type-XI of ASTMD-4956-09 High Intensity Prismatic retro reflective sheeting and conforming to IRC 67:2012 for full background of Blue Colour& white Letters and fixed over 4 mm Aluminium Composite Material sheet having minimum 0.4 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back suport frame of 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 mtr from the ground levelthe bottom of the board. The signpost shoud be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and White colour with bands of 30 cm of height .The signpost shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials,equipment,machinery and labour with all leads and lift,loading charges necessary for satisfactory completion of the work as directed by Engineer -in- Charge are complete item in all respects as per MORTH Spn (5th revision) cl.801. |
| 133 | Re-securing or easing & adjusting,without taking down shutters of any description exc 1 Sqm and not exc 2 Sqm each |
| 134 | M & L for applying tile adhesive of 10 mm thick below surface including roughening/chipping floor surface as per manufacturers instruction. |
| 135 | M&L for ColouredGlazed Ceramic tiles (400 x 400 mm)7 to 8mm thickin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 136 | M&L for preparing old painted surfaces by washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of distemper oil emulsion on surfaces of walls. |
| 137 | M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 138 | Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 139 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations |
| 140 | S&F Block boards grade 2 quality interior grade 18 mm thick commercial type fixed with screws to timber frame work |
| 141 | S&F of 75 Brass barrel towel bolts with cast or sheet barrel barrel and rolled or cast bolts and fixed |
| 142 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 143 | M&L for RCC type B-1, 1:1.5:3, M-20 (20mm graded aggregate) as in rafts, footings, foundations beams, plinth beams, bases for columnsetc etc and similar works. |
| 144 | All as per Item No above, but in columns, pillars, piers, posts and struts. |
| 145 | M&L for formwork to sides of concrete foundations, footings, bases of columns raft and raft beam sides and soffit of foundation and plinth beam and similar work vertical or to batter for rough finish surface of concrete in flat. |
| 146 | M&L for formwork to sides of pillar, post, struts, piers, columns and stanction and similar work vertical or batterfor rough finish surfaces of concrete in flat. |
| 147 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brickwork or concrete surface for fixing of vertical tiles of any description. |
| 148 | M&L for rolled mild steel section conforming to Fe-410-W (Gde-E-250 Quality B), as in framed work of doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other coverings. |
| 149 | M&L for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars etc in CM 1:4 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 150 | M&L granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in CM 1:3 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 151 | Providing & fixing of Place Identification Sign Board of size 1500 x 900 mm made out of Type – XI of ASTMD 4956-09 High Intensity Prismatic Retro reflectivesheeting and confirming to IRC 67:2012 for (Layout: Bolton Road & ORC Area) and fixed over 4MM Aluminium Composite Material sheet having minimum 0.4 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level the bottom of the board.The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height.The signpost shall be firmly fixed with MS base angle 35x35x4 mmin to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer -in-Charge. are complete item in all respects a per MORTH Spn(5th revision) cl.801. |
| 152 | Providing & fixing of Place Identification Sign Board of size 600 mm dia and a board of size 600 x 300mm made out of Type – XI of ASTMD 4956-09 High Intensity Prismatic Retro reflectivesheeting and confirming to IRC 67:2012 for full background of Red Colour & White Letters and fixed over 4MM Aluminium Composite Material sheet having minimum 0.4 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level the bottom of the board.The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and White colour with bands of 30cm of height.The signpost shall be firmly fixed with MS base angle 35x35x4 mmin to the ground by M-15 Concrete foundation of size 450x450x600mm including cost and conveyance of all materials ,equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer -in-Charge. are complete item in all respects a per MORTH Spn(5th revision) cl.801. |
| 153 | M&L walling of random rubble,uncoursed,well bonded,bedded and solidly hearted,built in C M 1:6 |
| 154 | Material and labour for precast cement concrete 1:2:4, type B0 (using 12.5 mm graded stone aggregate) louvers and jallies of 25 mm thick (measured solid) of size 60 x 60 or 90 x 60 centimetres including all mouldings set in cement mortar1:4 complete all as specified and as directed. |
| 155 | M & L for PCC type B1 1:2:4 (20mm graded aggregate) as in cills steps, bands plinth courses, copings, apex stone, bed plates kerbs, levelling course etc. |
| 156 | M&L for point wiring with 1.5 sq.mm FRLS insulated multistranded copper conductor ,1100 volts grade single core PVC insulated and unsheathed cable drawn in and including electrical grade drawn through new PVC surface conduit not less than 20 mm dia of stone/concrete wall /roofetc allas per site requirement including FRLS,PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor and pressed steel terminal boxes made out of 1.6mm thick MS sheet with sunkon wall for mounting, 60mm deep coveredincluding laminated sheet cover 3mm thick laminated hylam sheet fixed with cadmium plated screws/PVC gang box fully enclosed type for mounting switches,sockets,fan regulator, etcincluding making good the disturbed surfaces of walls and paint tuch up to match with the existing surfaces as per site requirement complete all as specified and directed by Engineer-in-Charge.One 3 pin socket outlet 5 Amps on the independent board. |
| 157 | All as item above One 3 pin socket outlet 5 Apms in the existing board with other switches. |
| 158 | All as item above One 3 pin 5 Amps socket outlet the switch board of light in the same vertical plane |
| 159 | All as per item above here-in-before but for one 16 Amps switch socket combination on independent board with 4 sqmm cables for phase and neutral and 4 sqmm cable green in colour as earth continuity conductor. |
| 160 | Supply and fix Switch socket combination 2 in 1, 3 pin, 5 Amps flush type universal complete all as specified and directed. |
| 161 | Supply and fix Switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal complete all as specified and directed. |
| 162 | S&F Polycarbonate surface box suitable for fixing One 15 Amps switch socket combination |
| 163 | S&F Polycarbonate surface box suitable for fixing One 5 Amps switch socket combination |
| 164 | S&F sheet metal enclosure DB SPN 4 way double door when MCB\"s to be used |
| 165 | S&F sheet metal enclosure DB SPN 8 way double door when MCB\"s to be used |
| 166 | S&F MCB SPN C Curve 6-32 Amps 230 V AC 50 Hz |
| 167 | S&F MCB SP C Curve 6-32 Amps 230 V AC 50 Hz |
| 168 | M & L for Submain wiring with two single core 6.0 Sq mm PVC insulated FRLS unsheathed copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC conduit and conduit accessories of 25 mm dia medium grade including running of 1 run of 6 Sq mm copper conductor multistranded PVC insulated FRLS cable as earth continuity conductor along the wiring and connected to the common earth dolly complete all as specified.( Note :- Two run of 6 sqmm cable and one run of earth wire and one run of non metalic conduit shall be measured and paid as 01 RM. |
| 169 | M&L for point wiring with 1.5 sq.mm FRLS insulated multistranded copper conductor ,1100 volts grade single core PVC insulated and unsheathed cable drawn in and including electrical grade drawn through new PVC concealed conduit not less than 20 mm dia of stone/concrete wall /roofetc allas per site requirement including FRLS,PVC insulated and unsheathed cable with copper conductor cable of size 1.50 sqmm as earth conductor and pressed steel terminal boxes made out of 1.6mm thick MS sheet with sunkon wall for mounting, 60mm deep coveredincluding laminated sheet cover 3mm thick laminated hylam sheet fixed with cadmium plated screws/PVC gang box fully enclosed type for mounting switches,sockets,fan regulator, etcincluding making good the disturbed surfaces of walls and paint tuch up to match with the existing surfaces as per site requirement complete all as specified and directed by Engineer-in-Charge.(a) One light point controlledby 1 way switch |
| 170 | All as per item above but 1 fan point controled by one way switch |
| 171 | All as per item above but 3 pin socket outlet 5 Amps |
| 172 | All as per item above but 3 pin socket outet 5 Amps on independent board |
| 173 | All as per item above but 2.5 Sq mm copper cable for 3 pin socket outlet 15 Amps controlled by one way switch on independent board |
| 174 | Supply and fix switch piano flush type 5 Amps, one way complete all as specified and directed. |
| 175 | S&F Ceiling rose 65x50 mm bakelite type 50 Hz 230 V |
| 176 | S&F Lamp holder to connect 10 W LED ball with lamp |
| 177 | S&F 15 litre capacity water geyser |
| 178 | S&F Exhaust Fan 230mm sweep |
| 179 | S&F 4 ft, 20W, 6000k LED batten light fitting |
| 180 | S&F 2x2 ft, 36W LED light fitting |
| 181 | S&F 4 Way SPN sheet metal enclosure |
| 182 | M & L for Submain wiring with two single core 6.0 Sq mm PVC insulated FRLS unsheathed copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC conduit and conduit accessories of 25 mm dia medium grade including running of 1 run of 6 Sq mm copper conductor multistranded PVC insulated FRLS cable as earth continuity conductor along the wiring and connected to the common earth dolly complete all as specified.( Note :- Two run of 6 sqmm cable and one run of earth wire and one run of non metalic conduit shall be measured and paid as 01 RM. |
AI Tender Summary
Tender Timeline
Nov 30, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 21, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 23, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender