Kerala Agricultural University-KAU has published State Plan 2021-22-Providing Aluminium Cabins For Cash Counter, Electrical Room And Security Cabin At C.Achuthamenon Memorial Building At Mc, Vellanikkara Providing Aluminium Cabins For Cash Counter, Electrical Room And Security Cabin. Submission Date for this Tender is 21-12-2021. Cabin Tenders in Main Campus, Vellanikkara Kerala. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Dec-2021 | DATE CORRIGENDUM | Date | 21-12-2021 |
| Sl. No. | Item Description |
| 1 | ELECTRICAL ROOM- Aluminium partition-for room |
| 2 | 21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 3 | od1672/2021_2022 : Providing and fixing Departmental aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.For fixed portion-Polyester powder coated aluminium |
| 4 | od1673/2021_2022 : Providing and fixing 8mm departmnetal fiber cement plane boards, in aluminum partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer |
| 5 | od1602/2021_2022 : Providing and fixing 8mm PVC foam board (coloured multiwood), in aluminum fabricated partition frames excluding the cost of aluminium extrusions as per architectural drawings and directions of Engineer - in- Charge. |
| 6 | 21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 7 | od1604/2021_2022 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With toughened glass panes of 6 mm thickness |
| 8 | 21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness |
| 9 | od1607/2021_2022 : Providing and fixing Alumnium expandable grill in the aluminium frame work extrusions already for door, window, ventilator shutters and partitions etc.complete as per the directions of Engineer - in -Charge |
| 10 | 50.9.15.1 : Supplying and fixing 200 mm Aluminium aldrop |
| 11 | od1613/2021_2022 : Providing PVC ceiling with PVC mutichamber hollow section 7mm or nearestthick, supreme quality sheets by dovetail locking system using 7/8x1.20mm anodized square tubes(section no 14477, 800gm/3.6m length) for frames (spacing not exceeding 60cm c/c),25x1.50mm flat (section no 10116,380gm/3.60m length) for suspenders, 20x20mm pvc ornamental cornice for sides and suspending the ceiling to the required line and level including all cost of materials and labour charges etc complete. |
| 12 | od1614/2021_2022 : Providing and fixing Bright/ matt finished stainless steel handles of approved quality 150mm |
| 13 | od1617/2021_2022 : Supplying and fixing good quality 150mm stainless steel tower bolt with stainless steel screw(heavy duty) |
| 14 | 9.70.2 : Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:100x58x1.90 mm |
| 15 | SECURITY ROOM |
| 16 | 21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 17 | od1608/2021_2022 : Providing and fixing 8mm PVC foam board (coloured multiwood), in aluminum fabricated partition frames excluding the cost of aluminium extrusions as per architectural drawings and directions of Engineer - in- Charge. |
| 18 | 21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 19 | od1610/2021_2022 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With toughened glass panes of 6 mm thickness |
| 20 | 21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness |
| 21 | od1612/2021_2022 : Providing and fixing Alumnium expandable grill in the aluminium frame work extrusions already for door, window, ventilator shutters and partitions etc.complete as per the directions of Engineer - in -Charge |
| 22 | 50.9.15.1 : Supplying and fixing 200 mm Aluminium aldrop |
| 23 | od1615/2021_2022 : Providing PVC ceiling with PVC multichamber hollow section 7 mm or nearest thick,supreme quality sheets by dovetail locking system using 7/8"X1.20mm anodized aluminum square tubes (section no 14477, 800 gm/ 3.60m length) for frames ( Spacing not exceeding 60 cm c/c), 25x1.50 mm flat(section no 10116, 380 gm/ 3.60m length) for suspenders, 20x20 mm PVC ornamental Cornish for sides and suspending the ceiling to the required line and level including all cost of materials and labour charges etc. complete. |
| 24 | od1616/2021_2022 : Providing and fixing Bright/ matt finished stainless handles of approved quality 150mm |
| 25 | od1618/2021_2022 : Supplying and fixing good quality 150mm stainless steel tower bolt with stainless steel screw(heavy duty) |
| 26 | 9.70.2 : Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:100x58x1.90 mm |
| 27 | CASH COUNTER |
| 28 | 21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 29 | 21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 30 | od1608/2021_2022 : Providing and fixing 8mm PVC foam board (coloured multiwood), in aluminum fabricated partition frames excluding the cost of aluminium extrusions as per architectural drawings and directions of Engineer - in- Charge. |
| 31 | od1604/2021_2022 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With toughened glass panes of 6 mm thickness |
| 32 | od1607/2021_2022 : Providing and fixing Alumnium expandable grill in the aluminium frame work extrusions already for door, window, ventilator shutters and partitions etc.complete as per the directions of Engineer - in -Charge |
| 33 | 50.9.15.1 : Supplying and fixing 200 mm Aluminium aldrop |
| 34 | od1614/2021_2022 : Providing and fixing Bright/ matt finished stainless steel handles of approved quality 150mm |
| 35 | od1617/2021_2022 : Supplying and fixing good quality 150mm stainless steel tower bolt with stainless steel screw(heavy duty) |
| 36 | 9.70.2 : Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:100x58x1.90 mm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
