}

Supply And Installation Of Lab Equipment Two Rota Vapour For Ceps Supply And Installation Of Lab Equipment Two Rota Vapour For Ceps . , Laying And Jointing Pvc Pipe. Heading , Specifications Of Rota Vapour Are As Follows: • End Stop Position: The Push B, GGSIP University Sector 16C Dwarka New Delhi-Delhi

Guru Gobind Singh Indraprastha University has published Supply And Installation Of Lab Equipment Two Rota Vapour For Ceps Supply And Installation Of Lab Equipment Two Rota Vapour For Ceps . , Laying And Jointing Pvc Pipe. Heading , Specifications Of Rota Vapour Are As Follows: • End Stop Position: The Push B. Submission Date for this Tender is 21-12-2021. Passenger Lift Tenders in GGSIP University Sector 16C Dwarka New Delhi Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

30085049
Supply And Installation Of Lab Equipment Two Rota Vapour For Ceps Supply And Installation Of Lab Equipment Two Rota Vapour For Ceps . , Laying And Jointing Pvc Pipe. Heading , Specifications Of Rota Vapour Are As Follows: • End Stop Position: The Push B
Tender
Indian
Delhi
Ggsip University Sector 16C Dwarka New Delhi
21-12-2021

Tender Details

Supply And Installation Of Lab Equipment Two Rota Vapour For Ceps Supply And Installation Of Lab Equipment Two Rota Vapour For Ceps . , Laying And Jointing Pvc Pipe. Heading , Specifications Of Rota Vapour Are As Follows: • End Stop Position: The Push Button Height Adjustment ( Electronic Lift ) • Immersion Angel Adjustment With 6 Or More Angles • Automatic Operation Sops On Power Failure ( Lifts Flask Automatically Out Of Heating Bath ) • Rotation Speed 10 – Up To 280 Rpm Or Higher • Maximum Flask Load Up To 3Kg Or Higher • Foam Sensor And Level Sensor Are Optional • Vertical Condenser Bath Should Allow The Use Of Water And Oil As A Heating Media Up To 200 C. Mechanical And Electronic Over-Temperature Control ( Cuts Off Power When Actual Temperature Exceeds Set Temperature And Also Set Point ) Display Should Be Digital, Displays All Operating Parameters ( Indicates Set And Actual Values Of Heating Bath Temperature, Rotation Speed And Lift Position ) Pump: The Vacuum Pump Should Be Chemically Resistant Ptfe Diaphragm Pumps With Low Noise Emission. The Suction Capacity Should Be 1.8M3 / H Or Higher Re-Circulating Chiller: Temperature Range – 10 C To 25 C With Flow Rate 2.5L / Min. Or Higher. With Digital Display ( Resolution 0.1 C )

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
INR 15 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail