Construction Of Multipurpose Community Centre At Kyongsa, Gyalshing In West Sikkim
Tender Value
13.07 Crore
Estimated cost
Bid Submission
27 Dec 2021
0 days left
EMD
32.69 Lakhs
Bank guarantee accepted
Document Fee
1 Lakhs
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kyongsa Gyalshing West Sikkim → Sikkim
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Multipurpose Community Centre At Kyongsa, Gyalshing In West Sikkim
BOQ
| Sl. No. | Item Description |
| 1 | 1. MAIN BUILDING |
| 2 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 3 | Providing and laying hand packed stone soling in building works with clean hard selected stine all complete. |
| 4 | P/L in position cement concrete of 1:3:6(1 cement,3 coarse sand,6 graded stone aggregate of 20mm and down size) i/c compacting curing etc all complete. |
| 5 | Filling inside plinth in building works with 23cm layers consolidated to 15cm i/c watering, ramming etc all complete. |
| 6 | P/L coarse rubble stone masonary with hammer dressed clean hard selected stone in 1:3:6 cc (1 cement, 3 clean coarse sand, 6 clean hard graded stone chips of size 40mm nomonal size)i/c bond stone through stone of size 150mm x150mm x 450mm manufactued in 1:4:8(1 cement, 4 clean coarse sand,8 clean hard aggregate of size 40mm and down)curing etc all complete. |
| 7 | P/L in position 1:1.5:3 reinforced cement concrete excluding the cost of the form work finishing and reinforcement. |
| 8 | Supplying bending Binding of reinforcement as per design i/c cost of binding wires all complete. |
| 9 | FORM WORK |
| 10 | FOUNDATION |
| 11 | COLUMN |
| 12 | BEAM |
| 13 | SLAB |
| 14 | P/L plum concrete in 1:2:4cc (1 cement, 2clean coarse sand, 4 clean hard graded stone of 20mm down nominal guage) with 70% clean hard stone of sizes not exceeding 15cm i/c shuttering, compacting and curing etc all complete. |
| 15 | P/L of first class brick work in half brick thick in superstructure of standard size bricks of 1:4 cement mortar i/c curing etc all complete |
| 16 | P/L 12mm thick cement plaster 1:3 mix in single coat i/c finishing even and smooth and curing etc all complete |
| 17 | Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 18 | P/L flooring with granite marble stone slab 20mm thick granite stone slab flooring of size not less than 1.0sqm of 20mm thick laid over 20mm avg 1:4cm thick bare laid cement concrete and joint treated with white cement mixed with matching pigment curing incld rubbing to give a grinite finish as per the direction of Engineer In-charge and carriage of material upto the work site all complete. |
| 19 | P/L 20mm thick granite stone in Risers of steps skirting and pads walls pillars etc laid on 10mm thick bare 1:3cm joint treated with white cement mixed with matching pigment curing incld rubbing to give smooth finish as per the direction of Engineer In Charge and carriage of materials up to work site all complete. |
| 20 | P/L white or colour glazed tiles anti skid( elegant, cashmere, egypcian rustic, celebrity, lara etc or equivelent)of glossy series of celebrity, elgent or equivelent in flossring treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm thick cement mortar 1:3 (1 cement, 3 clean coarse sand) finished with flush pointing with white cement slurry. |
| 21 | Providing and Laying white or coloredglazed tiles of size 200mm x 300mm of plain/normal prints colours (white, grey, ivory, platinum, cream, glacier white, summersand, beach, wood duro, melody, or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry. |
| 22 | Providing and Laying flooring with marble stone slabs flooring of size not less than 1.0 sqm of20mm thick laidover 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete (Zebra black marble or equivalent) |
| 23 | Providing and Laying Chequerstiles in on flooring over 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry. |
| 24 | S/F/F/F steel tubular trusses i/c cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted i/c special shape water etc as per the direction of engineer in charge |
| 25 | Providing, fitting, fixing of 24 BWG Pre-painted hullas sheet roofing with lapping of 150mm with GI hook bolts and nuts 8mm dia with bitumen GI limpet washers incld carriage all complete. |
| 26 | Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULASSheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete. |
| 27 | Providing fitting fixing 16mm thick valley of 90cm overall width in plain Gp sheet class I fixed with GI J or L hook bolts and nuts 8mm dia GI limpet and bitumen washer complete |
| 28 | Providing, fitting and fixing 23cm deep 24BWG G.P. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets complete. |
| 29 | P/F/F of dressed local timber in all types of frames complete.(Tooni, Katys equivalent) |
| 30 | P/F/F water proof flush door shutters solid block hard core construction with frames of 1st class hard wood well matched 3mm teak ply decorative type on face of the shutters i/c hinges all complete |
| 31 | P/F/F in position of fully glazed shutters in windows and doors of champ wood or equivalent including steel butt hinges, screws, 3mm glass panes of modi guard or equivalent etc complete. |
| 32 | P/F/F rolling shutter of approved make made of required size MS laths interlocked together through their entire length and joined together at end by end lock mounted on specially designed pipe shaft with brackets side guides and arrangement for inside and outside locking with push and pull operation complete including providing and fixing wire springs grade no 2 and MS top cover of required thickness of rolling shutters as per the direction of Engineer-In- Charge all complete. |
| 33 | Providing and fixing M.S grills in timber frames of windows with M.S flats with nuts, bolts, and smooth finishing of welded joints/surface with Grills weighing8.00Kg/sqm as per the direction of Engineer - in- Chargeall complete |
| 34 | Tubular Steel Railing on Medium Weight steel channel ( ISMC series) 100 mm x 50 mm (Providing, fixing and erecting 50 mm dia steel pipe railing in 3 rows duly painted on medium weight steel channels (ISMC series) 100 mm x 50 mm, 1.2 metres high above ground, 2 m centre to centre, complete as per approved drawings) |
| 35 | P/F Brass bright finished butt hinges with necessary screws etc all complete. |
| 36 | P/F 100 mm mortise lock with 6 levers and pair of handles with necessary screws etc complete. |
| 37 | P/F/F of tower bolts 250- x 10mm with necessary screws etc complete. |
| 38 | P/F/F handles 125mm size with necessary screws etc complete. |
| 39 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface. |
| 40 | Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete: |
| 41 | Providing and painting with plastic emulsion two or more coats on new surface of required shade to give even shade i/c brushing and cleaning the surface to make the surface free from dirt, dust and smoothened the surface by sand papering all complete |
| 42 | P/F of 12mm thick and 100mm wide palmet with curtain rods and brackets incld fixing with M.S flat 10cm long and plugs etc comp on champ timber |
| 43 | Providing and applying priming coat with ready mixed red oxide, zincchromate primer in steel/galvanised iron steel works i/c prepartion of the surface all complete. |
| 44 | Providing and painting with ready mixed paint of approved quality & shade with two or more coats to give an even and smooth shade i/c cleaning the surface all complete. |
| 45 | Providing U shaped drain of 23cmx23cm of internal dimension with 1:2:4 plum concrete (40mm & down) base concrete of thickness of 15cm with standard specification over 15 cm stone soling including 1:3 cement plaster with neat cement polishing & rounding of junction. |
| 46 | Providing hold fast of (40x5)mm flat iron including fixing to frame with 10mm dia. Bolts nuts and timber plugs and embedding in CC 1:3:6 ( 1 cement, 3 coarse sand, 6 graded stone aggregate 2omm nominal size) block of size (30x10x15)cm. as per the direction of Engineer - in- Chargeall complete: |
| 47 | Providing/Fitting/Fixing 25 mm. thick false ceiling /paneling of silver fir in wooden frames of timber equivalent to KATUS OR SAAJ OR EQUIVALENT excludingthe cost of polishing and including cost of one coat priming on unexposed frame all compete |
| 48 | Loading and unloading of cement and steel (stock materials) |
| 49 | Cost of haulage excluding loading and unloading 60km |
| 50 | Loading and unloading of non stock materials |
| 51 | Cost of haulage excluding loading and unloading 49km |
| 52 | Loading and unloading of stone |
| 53 | Cost of haulage excluding loading and unloading 49km |
| 54 | 2. SITE LEVELLING & PROTECTIVE WORKS |
| 55 | Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 meters. |
| 56 | Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction ofEngineer in Charge. |
| 57 | Loading and unloading of cement |
| 58 | Cost of haulage excluding loading and unloading(55km) |
| 59 | Loading and unloading of sand |
| 60 | Cost of haulage excluding and unloading(25km) |
| 61 | Loading and unloading of stone |
| 62 | Cost of haulage excluding loading and unloading(10KM) |
| 63 | 3. APPROACH ROAD AND PARKING |
| 64 | Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres. |
| 65 | Throwing of spoils within 5 km |
| 66 | Excavation in foundation trenches in mixed soil I/c throwing of spoils within 30 m lead and 1.5 m liftall complete: |
| 67 | Providing and Laying Plum concrete in 1:4:8 c.c. (1cement, 4 coarse sand, 8 clean hard graded stone chips of 40 mm down nominal gauge) with 50% cleanhard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction of Engineer in Charge. |
| 68 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 |
| 69 | Granular sub base with coarse graded material (table 400-2) constructuion of granualar subbase by providing coarse graded material, spreading in uniform layer with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achive the desired density, complete as per clause 401. for grading-1 material |
| 70 | Water bond macadam (providing laying and spreading and compacting stone aggregrate of specific size to water bond macadam specification including spreading in uniform thickness handpacking rolling wirh vibrator 8 -10 tones in stages to proper grade and camber applying and brooming requisite type of screening/binding materialto fillupthe interscites of coarse aggregrate, watering and comoacting to required density.) |
| 71 | Water bond macadam (providing laying and spreading and compacting stone aggregrate of specific size to water bond macadam specification including spreading in uniform thickness handpacking rolling wirh vibrator 8 -10 tones in stages to proper grade and camber applying and brooming requisite type of screening/binding materialto fillupthe interscites of coarse aggregrate, watering and comoacting to required density.) |
| 72 | Tack coat (provising and applying tack coat with bitiminus emulsion using emulsion pressure distributer at required rate on the prepared bituminus/granular surface clean with mechanical broom.) |
| 73 | bituminus macadam (providing and laying of bituminus macadam with 100-120 tph hto mix plant producing an avarge output of 75 tonnes per hour using chrushed aggregates of specified garding pr mixed with bitumenus binder transproted to site, laid over previous prepared surface with paver finisher to required grade, level and alingment and rolled as per clause 501.6 and 501.7 to achive the desired compaction. for garding-II (19mm nominial) |
| 74 | Seal Coat (Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A and B seal coats) |
| 75 | Providing and laying standard Box drain drain with cement concrete base in 1:2:4 (1 cement, 2 clean coarse sand, 4 stone chips 20mm and down) mixof 100mm thick over clean hard selected stones soling of 150mm thick and 1:2:4 (1 cement, 2 clean coarse sand, 4 stone chips 40mm and down) mix plum concrete along the vertical side of thickness 150mm and depth 450mm including curing, compacting, as per the direction ofthe Engineer- in - Charge. |
| 76 | Providing and laying parapet of standard size on 1:2:4 plum concrete and plastering woth cement mortar of 12mm thick with recorn 3s with lime white washing three or more coats, complete as per the direction of engineer in-charge (60cm height, 45cm top and 60 cm bottom) |
| 77 | Loading & unloading of stock material |
| 78 | Cost of haulage excluding loading and unloading 55km |
| 79 | Loading and unloadingof sand |
| 80 | Cost of haulage excluding loading and unloading 46km |
| 81 | Carriage of non-stock materials I.e. Stone within 40 Km radius. |
| 82 | Cost of haulage excluding loading and unloading 46km |
| 83 | 4. BOUNDARY FENCING |
| 84 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 85 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means) |
| 86 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. |
| 87 | 1:3:6 mix. (1 cement, 3 coarse sand, 6 stone aggregate of 20mm & down size) |
| 88 | G.I Barbed wire Fencing 1.8 metre high (Providing and fixing 1.8 metres high GI barbed wire fencing with 2.4 m angle iron posts 50 mm x 50 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 12 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 807 ) |
| 89 | Loading and unloading of cement and steel (stock materials) |
| 90 | Cost of haulage excluding loading and unloading 45km(jorthang) |
| 91 | Loading and unloading of non stock materials |
| 92 | Cost of haulage excluding loading and unloading 25km |
| 93 | Loading and unloading of stone |
| 94 | Cost of haulage excluding loading and unloading 20km |
| 95 | 5. INTERNAL WATER SUPPLY AND SANITATION |
| 96 | Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan European One pice (Star white) CAT NO 92008 |
| 97 | P/F stain less steelkitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required. |
| 98 | Providing, fitting and fixing white vitreous china flat back or wall corner type lipped front urinal basin of size 440x315x325 mm with 5 ltrautomatic flushing cistern with C.I. brackets, GI flush pipe and spreaders with brass unions and G.I. clamps including cutting and making good the walls and floors as required all complete: |
| 99 | Providing, fitting and fixing. white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP brass cap and unions,complete including cutting and making good the walls wherever required. HINDWARE.One wash basin with two pillar cock.(55 cm x 40 cm CAT NO 10001) |
| 100 | Providing, Fitting and fixing GI pipe of medium class completeincluding cuttings and making good the walls etc.on concealed fittings including Providing and painting with anti corrosive bituminous paints all complete: (Internal Works) excluding the cost of fittings all complete: |
| 101 | 15 mm dia |
| 102 | Cost of Fittings @ 10 % |
| 103 | P/F/F of fitting items |
| 104 | Bib cock C.P |
| 105 | Pillar cock 15mm dia |
| 106 | Stop Cock |
| 107 | Angular stop cock |
| 108 | Providing fitting fixing of toilet paper holder |
| 109 | Providing, fitting and fixingBeveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete. |
| 110 | P/F/F of porcelain soap dish |
| 111 | P/F/F of towel rail chromium plate |
| 112 | Providing, fitting and fixing towel ring of chromium plated brass complete with CP brass screw and timber cleats. |
| 113 | Connecting Pipe |
| 114 | Shower Rose without arm |
| 115 | Sanitary Faucet |
| 116 | P/F/F of floor trap |
| 117 | P/F/F of soil waste pipe wind pipe i/c all complete 100 mm dia prince/supreme. |
| 118 | GATE WAY VALVE15MM DIA |
| 119 | Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sintex or equivalent) 2000LTR |
| 120 | Provision for W/S & sanitary fittings ( Payment to be made on actual measurement) |
| 121 | Making of inspection chamber( Payment to be made on actual measurement) |
| 122 | 6. GENERAL TOILET |
| 123 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 124 | Providing and laying hand packed stone soling in building works with clean hard selected stine all complete. |
| 125 | P/L in position cement concrete of 1:3:6(1 cement,3 coarse sand,6 graded stone aggregate of 20mm and down size) i/c compacting curing etc all complete. |
| 126 | Filling inside plinth in building works with 23cm layers consolidated to 15cm i/c watering, ramming etc all complete. |
| 127 | P/L coarse rubble stone masonary with hammer dressed clean hard selected stone in 1:3:6 cc (1 cement, 3 clean coarse sand, 6 clean hard graded stone chips of size 40mm nomonal size)i/c bond stone through stone of size 150mm x150mm x 450mm manufactued in 1:4:8(1 cement, 4 clean coarse sand,8 clean hard aggregate of size 40mm and down)curing etc all complete. |
| 128 | P/L in position 1:1.5:3 reinforced cement concrete excluding the cost of the form work finishing and reinforcement. |
| 129 | Supplying bending Binding of reinforcement as per design i/c cost of binding wires all complete. |
| 130 | FORM WORK |
| 131 | FOUNDATION |
| 132 | COLUMN |
| 133 | BEAM |
| 134 | SLAB |
| 135 | P/L of first class brick work in half brick thick in superstructure of standard size bricks of 1:4 cement mortar i/c curing etc all complete |
| 136 | P/L 12mm thick cement plaster 1:3 mix in single coat i/c finishing even and smooth and curing etc all complete |
| 137 | Providing and Laying white or coloredglazed tiles of size 200mm x 300mm of plain/normal prints colours (white, grey, ivory, platinum, cream, glacier white, summersand, beach, wood duro, melody, or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry. |
| 138 | P/L flooring with granite marble stone slab 20mm thick granite stone slab flooring of size not less than 1.0sqm of 20mm thick laid over 20mm avg 1:4cm thick bare laid cement concrete and joint treated with white cement mixed with matching pigment curing incld rubbing to give a grinite finish as per the direction of Engineer In-charge and carriage of material upto the work site all complete. |
| 139 | P/L white or colour glazed tiles anti skid( elegant, cashmere, egypcian rustic, celebrity, lara etc or equivelent)of glossy series of celebrity, elgent or equivelent in flossring treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm thick cement mortar 1:3 (1 cement, 3 clean coarse sand) finished with flush pointing with white cement slurry. |
| 140 | P/F/F of dressed local timber in all types of frames complete.(Tooni, Katys equivalent) |
| 141 | P/F/F water proof flush door shutters solid block hard core construction with frames of 1st class hard wood well matched 3mm teak ply decorative type on face of the shutters i/c hinges all complete |
| 142 | P/F/F in position of fully glazed shutters in windows and doors of champ wood or equivalent including steel butt hinges, screws, 3mm glass panes of modi guard or equivalent etc complete. |
| 143 | Providing and fixing M.S grills in timber frames of windows with M.S flats with nuts, bolts, and smooth finishing of welded joints/surface with Grills weighing8.00Kg/sqm as per the direction of Engineer - in- Chargeall complete |
| 144 | Tubular Steel Railing on Medium Weight steel channel ( ISMC series) 100 mm x 50 mm (Providing, fixing and erecting 50 mm dia steel pipe railing in 3 rows duly painted on medium weight steel channels (ISMC series) 100 mm x 50 mm, 1.2 metres high above ground, 2 m centre to centre, complete as per approved drawings) |
| 145 | P/F Brass bright finished butt hinges with necessary screws etc all complete. |
| 146 | P/F 100 mm mortise lock with 6 levers and pair of handles with necessary screws etc complete. |
| 147 | P/F/F of tower bolts 250- x 10mm with necessary screws etc complete. |
| 148 | P/F/F handles 125mm size with necessary screws etc complete. |
| 149 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface. |
| 150 | Providing and laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even and smooth all complete: |
| 151 | Providing and painting with plastic emulsion two or more coats on new surface of required shade to give even shade i/c brushing and cleaning the surface to make the surface free from dirt, dust and smoothened the surface by sand papering all complete |
| 152 | Providing and painting with ready mixed paint of approved quality & shade with two or more coats to give an even and smooth shade i/c cleaning the surface all complete. |
| 153 | Providing hold fast of (40x5)mm flat iron including fixing to frame with 10mm dia. Bolts nuts and timber plugs and embedding in CC 1:3:6 ( 1 cement, 3 coarse sand, 6 graded stone aggregate 2omm nominal size) block of size (30x10x15)cm. as per the direction of Engineer - in- Chargeall complete: |
| 154 | Loading and unloading of cement and steel (stock materials) |
| 155 | Cost of haulage excluding loading and unloading 60km |
| 156 | Loading and unloading of non stock materials (sand) |
| 157 | Cost of haulage excluding loading and unloading 49km |
| 158 | Loading and unloading of stone |
| 159 | Cost of haulage excluding loading and unloading 49km |
| 160 | 7.SEPTIC TANK AND SOAK PIT |
| 161 | Excavation in soil in hilly area by manualmeans including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 metres. |
| 162 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means) |
| 163 | P/L in position cement concrete of 1:3:6(1 cement,3 coarse sand,6 graded stone aggregate of 20mm and down size) i/c compacting curing etc all complete. |
| 164 | Providing and laying hand packed stone filling in building works with clean hard selected stones, all complete. |
| 165 | Sand filling in building works in layer not exceeding 20cum including watering, ramming etc, all complete. |
| 166 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements. |
| 167 | 1:1:2 (1cement, 1coarse sand, 2 graded stone aggregate of 20mm nominal size) |
| 168 | Supplying bending Binding of reinforcement as per design i/c cost of binding wires all complete. |
| 169 | FORM WORK |
| 170 | Wall |
| 171 | Foundation, footings, base of column etc for mass concrete. |
| 172 | Slab |
| 173 | Providing and Laying first class brick work in one brick thick in superstructureof standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete. |
| 174 | P/L 12mm thick cement plaster 1:3 mix in single coat i/c finishing even and smooth and curing etc all complete |
| 175 | Providing, fitting and fixing soil, waste and vent pipes including testing etc complete.160 mm dia PRINCE/SUPREME or equivalent soil pipes |
| 176 | Loading and unloading of cement and steel (stock materials) |
| 177 | Cost of haulage excluding loading and unloading 120km |
| 178 | Loading and unloading of non stock materials SAND |
| 179 | Cost of haulage excluding loading and unloading 40km |
| 180 | Loading and unloading of stone |
| 181 | Cost of haulage excluding loading and unloading 20km |
| 182 | 8. GATE AND SENTRY POST |
| 183 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 184 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual means) |
| 185 | Providing and Laying 1:3:6 cement concrete (1 cement, 3 clean coarse sand & 6 clean hard graded stone chips of 20mm and down size) including compacting, curing etc all complete. |
| 186 | Providing and laying. coarse Rubble Stone Masonryin 1:3:6c.c. (1 cement, 4 sand, 8 clean hard graded stone ships of size 40mm) including bond stone, through stone of size 150mm x 150mm x 450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down)and curing etc, complete as per the direction of Engineer in Charge excluding the cost of carriage of materials. |
| 187 | Filling with available excavated earth in trenches with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete. |
| 188 | Providing and Laying in position 1:1.5:3 mix( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm and down nominal gauge) grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements as per the direction of the Engineer-In-Charge. |
| 189 | Supplying, bending and placing in position tor- steel reinforcement in all R.C.C works including cost of binding wires , all complete. |
| 190 | Providing, fixing & removing form work for casting R.C.C items (with locally available timber) |
| 191 | Footings |
| 192 | Columns |
| 193 | Beam |
| 194 | Slab |
| 195 | Providing, fitting and fixing of dressed sal wood or equivalentin all types of frames complete (with imported from outside the state.) |
| 196 | Providing fitting and fixing water proof flush doors shutters, solid block hard core construction with frame of 1st class hard timber, with well matched 3mm teak ply decorative type opn one faces of the shutters i/c hinges with screws complete. |
| 197 | P/F/F in position of fully glazed shutters in windows and doors of champ wood or equivalent including steel butt hinges, screws, 3mm glass panes of modi guard or equivalent etc complete. 40mm |
| 198 | Providing and Laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 coarse sand) as per the direction of Engineer in Charge includingcuring etc all complete. |
| 199 | Providing and Laying 12mm thick cement plaster in 1:3 mix i/c curing etc. all complete. |
| 200 | Providing, Fitting and Fixing doors and windows fittings. |
| 201 | Sliding door bolts 300 x 16 mm Brass (Chromium Palted) |
| 202 | Tower Bolts 300 x 10 mm Brass (Chromium Plated) |
| 203 | Tower Bolts 250 x 10 mm Brass (Chromium Plated) |
| 204 | Providing, fitting and fixing. Tower bolts 250x10mm with necessary screw etc complete. |
| 205 | Handles 125 mm with necessary screws |
| 206 | Providing and Laying white or colored glazed vitrified tiles Pearl (white, marvel Atlanta, jet black etc or equivalent) in flooring, treads of steps landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 207 | Providing & fixing 12 mm thick & 100 mm wide pelmets with (25 mm dia) curtain rods and brackets i/c fixing with (25x3) mm M.S Flat 10 cm long and plugs etc. complete in champs timber or equivalent with necessary screws/nails. |
| 208 | Providing & Laying plaster of paris putty of 2mm thick over plastered surface to prepare the surface even & smooth all complete. |
| 209 | Providing & painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade i/c brushing the surface clean dirt, dust etc sand papering and filling the scratches complete on New Surface. |
| 210 | Providing and painting with with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing thew surface clean of all dirt dust and smoothened by sand opaper etc complete. |
| 211 | Providing and applying ready mixed pink on timber worki/c preparation of surface by throughly cleaning and sand papering etc.all complete: |
| 212 | S/F/F/F steel tubular trusses i/c cutting, hoisting fixing in position for gate |
| 213 | Providing & applying priming coat with ready mixed Red oxide, Zinc chromate primer on steel/galvanized iron steel works i/c preparation of the surface. |
| 214 | Providing and applying ready mixed paints of approved quality and shade two or more coats to give an even shade i/c cleaning the surface all complete: |
| 215 | Loading and unloading of stock materials of stock materials from store to work site within 60km radius |
| 216 | Cost of Haulage Excluding Loading and Unloading 60km |
| 217 | Carriages of non-stock material i.e sand within 20 km radius |
| 218 | Cost of Haulage Excluding Loading and Unloading 20km |
| 219 | Carriages of non-stock material ie stone within 20 km radius |
| 220 | Cost of Haulage Excluding Loading and Unloading 20km |
| 221 | Carriages of non-stock material ie stone chipswithin 20 km radius |
| 222 | Cost of haulage excluding loading and unloading 20km |
| 223 | 9. INTERNAL ELECTRIFICATION(NOTE: THE HIGHER RATE QUOTED WILL NOT BE ACCEPTED IN THIS WORK AND WILL BE TAKEN AT PAR BASIS) |
| 224 | 9. a) WIRING |
| 225 | Wiring for light/Fan/Call bell & 6 A plug point with 2x1.5 sqmmFRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x 1.5 sqmmHR FRLS PVC insulated copper conductor single core cable as required. |
| 226 | Wiring for 16 A plug point with 2x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with 1x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable as required. |
| 227 | Wiring for sub-main for light/fan/call bell & 6 amps plug points with 2x 2.5 sqmmFRLSH PVC insulated copper conductor single core cable in best quality recessed alkathine pipe and earthing the point with 1x2.5 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 228 | Wiring for sub-main for 16 amps (2x1000W) plug points with 2x4.0 sqmm FRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with 1x4.0 sqmm FRLSH PVC insulated copper conductor single core cable as required. |
| 229 | Wiring for sub-mainwith2x 6.0 sqmm FRLSHPVC insulated copper conductor single core cable in best quality recessed alkathine pipeand earthing the point with1x 6.0 sqmmFRLSH PVC insulated copper conductor single core cable as required. |
| 230 | Supplying & fixing Conduit inspection bend 1/2\",3/4\"1\" |
| 231 | Supplying & fixing Conduit inspection Tee 1/2\",3/4\" & 1\" |
| 232 | Supplying & fixing Conduit inspection round 1/2\",3/4\" & 1\" |
| 233 | Supplying & fixing M.S. Box as junction purpose 200mm x 150mm |
| 234 | Supplying & fixing Bakelite sheet 125mm x 175mm |
| 235 | Contigency @0.5% |
| 236 | 9 b): SWITCH SOCKET AND ACCESSORIES |
| 237 | Supplying & fixing 06 amps 1 way FT switch on white moduler plate and metal flux box including connection etc. as required. |
| 238 | 1 no. 06 amps FT switch with 1 no white 1 moduler plate and 1 moduler metal flux box. |
| 239 | 2 no. 06 amps FT switch with 1 no white 2 moduler plate and 2 moduler metal flux box. |
| 240 | 3 no. 06 amps FT switch with 1 no white 3 moduler plate and 3 moduler metal flux box. |
| 241 | 4 no. 06 amps FT switch with 1 no white 4 moduler plate and 4 moduler metal flux box. |
| 242 | 6 no. 06 amps FT switch with 1 no white 6 moduler plate and 6 moduler metal flux box. |
| 243 | 8 no. 06 amps FT switch with 1 no white 8 moduler plate and 8 moduler metal flux box. |
| 244 | Supplying & fixing 1 no. 16 amps socket, & 16 amps switch,white plate (4 module) & Metal flux box (4 module)includingconnection etc. as required. |
| 245 | Supplying & fixing 1 no. 06 amps socket with 1no. 06 amps switch, 1 no. 3 module white plate & 1 no. 3 module metal flux box ) including connection etc. as required. |
| 246 | Supplying & fixing 1 no. 2 way switch with 1 no 1module white plate & 1 no 1 module metal flux box including connection etc. as required. |
| 247 | Contingency @0.5% |
| 248 | 9 c) LIGHT FITTING AND ACCESSORIES |
| 249 | Supplying & fixing LEDtube light fitting 22 watts 4 ftincluding connection etc. as required.. |
| 250 | Supplying & fixing LEDbulk head fitting including connection etc. as required. |
| 251 | Supplying & fixing surface LED fitting 12 wattsincluding connection etc. as required. |
| 252 | Supplying & fixing recessedLED fitting 10 wattsincluding connection etc. as required. |
| 253 | Supplying & fixing LED wall mounting mirror light including connection etc. as required. |
| 254 | Supplying & fixing Calling bell (Ding-Dong) with 100mm x 150mmsunmicabox including connection etc. as required. |
| 255 | Supplying, Installation, testing & commissioning of ventilating fan 250mmincluding connection as required. |
| 256 | Supplying & fixing recessed mounted LED panel Light Fitting 2ft X 2ft 36 watts including connection etc. as required. |
| 257 | LED Exit sign Light |
| 258 | LED Entry sign light |
| 259 | Contingency @0.5% |
| 260 | 9 d) SERVICE MAINS, SYSTEM EARTHING AND DISTRIBUTION SYSTEM |
| 261 | L.T distribution switch board with aluminum bus bar, out-door type Kiosk, having electrolytic annealed Aluminum bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls:LTDB 200 AINCOMING:1 No. 200 A, 4P,50KA, MCCB OUTGOING: 3 Nos. 100A TP MCCB, 35 KA, & 1 No. 32A TP MCCB, 35 KA all with built in Thermo Magnetic Release. |
| 262 | Supplying & installation of MCB distribution board Double Door/Single door(CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code) |
| 263 | a)8 ways SPN (Double door) |
| 264 | b)12 ways SPN(Double door) |
| 265 | c)12 ways (TP &N)(Double-door) |
| 266 | d)16 ways SPN (Double door) |
| 267 | Supplying, installation, testing & commissioning ofMiniature circuit breaker (CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code) |
| 268 | a)Single pole 6 - 32 Amps |
| 269 | b)Double pole 6 - 32 Amps |
| 270 | c)Four pole 6-32Amps |
| 271 | P/L 3 ½ core x 50 sqmm armoured cable |
| 272 | Rigid U PVC pipe of 50mm dia, as per IS:4985-2000 working pressure 6kgF/cm2 (FinOlex) |
| 273 | Supplying,installation , testing & commissioning of ON/OFFLOADChangeover Switch(CONFORMING TO CPWD /NBC/ Relevant IS & BIS Code) |
| 274 | a)MCCB Fourpole200 amps / 415 V,36kA |
| 275 | Supplying,installation of 200A,50 kA MCCB |
| 276 | Providing & installing Copper tube type 1m long lightning arrestor having prongsat the top of the arrestor and base plate with nuts & bolts |
| 277 | Providing & earthing with 2 mtr. Long safe earthingwith T19 electrode & 1 bag back fill chemical compound |
| 278 | Provoding & laying of G.I. strips 25mm X 5mm looping earth from earth electrode to main distribution system of the building |
| 279 | Providiong & laying 6/8 SWG Copper wire from main dist. Pannel to distribution system of the building. |
| 280 | Surge Protection DeviceCONFORMING TO (CPWD/NBC/Relevant IS & BIS code) |
| 281 | a)SPD 40KA3P + N,(Type 2 SPDs ) 2 Mod |
| 282 | Provoding & laying of copper strips 25mm X 5mm looping earth from earth electrode to main distribution system of the building |
| 283 | Sundries |
| 284 | Contigency @ 0.5% |
| 285 | 9 e) SERVICE CONNECTION FEE |
AI Tender Summary
Tender Timeline
Nov 29, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 27, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 29, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender