Orissa Power Transmission Corporation Limited-OPTCL has published Construction Of Cc Road , Security Shed , Open Stockyard Inside 220 / 132 Kv Grid S/S Optcl , New Aska . Submission Date for this Tender is 13-12-2021. Road Work Tenders in Aska Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earthwork in excavation in hard soil onfoundation trenches in all kinds of soil including moorum stony earth and earth mixed with boulder except sheet rocks and boulders requiring blasting including dressing and leveling the bed up to the required depth and depositing the excavated materials with all leads and lifts T&P shoringand shuttering , dewatering if required etc complete including cost,conveyance,taxes of all labour with T&P required etc complete as per the direction of the Engineer in charge. |
2 | Supplying all labour with T&P for filling foundation and plinth with sand including watering, ramming etc comolete including cost , conveyance , royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete (measurement will be taken on finished & complete section only) as per the direction of the Engineer in charge. |
3 | Construction of granular sub-base by providing Close graded Granular subbase Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works ( Page 160 of AR 2006 ) |
4 | Cement concrete with (1:3:6) in foundation and floors using 40 mmsize blackhard crusher broken granite stone metal of approved quality from approved quarry including lowerlaying concretewatering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
5 | RCC (1:1.5:3) in following works and using 12 mmsize blackhard crusher broken granite stone chips of approved quality from approved quarry including lowerlaying concretewatering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
6 | In F & P |
7 | Coloumn and Beam in SS |
8 | Lintel |
9 | Chajjah |
10 | Slab |
11 | Supplying,fitting,fixing of MS rod or tor steel including straightening ,cutting,bending, binding by using binding wire of18-20 gauze, molding, welding, jointing if necessary and placing in position as per drawing & technical specification( Payment shall be made on weight of M.S. Rod & Tor steel only and no separate payment will be made towards the weight of binding wires) including cost,conveyance, royalties and taxes of all materials and cost, conveyance,taxes of all labourT & P required etc complete as per direction of Engineer in charge. |
12 | Flyash brick masonry in cement mortar ( 1:6 )in F&P using of size(23 X11X 8 ) cm with dimensional tolerance (+or-) 8% and crushing strength notless than 35Kg/cm2after immersing the bricks for six hours in water before use,including splays cutting,circular molding& corbeling,chamfering & similar such type of works,watering and curing etc completeincluding cost, conveyance, royalties and taxes of all materials & cost, conveyance, taxes of all labour with T&P required for the work etc. complete in all respect as per the direction of Engineer-in-charge. |
13 | Flyash brick masonry in cement mortar ( 1:6 )in Superstructure using of size(23 X11X 8 ) cm with dimensional tolerance (+or-) 8% and crushing strength notless than 35Kg/cm2after immersing the bricks for six hours in water before use,including splays cutting,circular molding& corbeling,chamfering & similar such type of works,watering and curing etc completeincluding cost, conveyance, royalties and taxes of all materials & cost, conveyance, taxes of all labour with T&P required for the work etc. complete in all respect as per the direction of Engineer-in-charge. |
14 | 12 mm thick cement plaster with cement and sand mortar (1:6 ) finished smooth over outside rough surfaces of brick masonry walls etc with wateringand curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge. |
15 | Providing,fitting and fixing of alluminium door with OEL anodized Al. door sectionof 9202 as vertical member ,9201 as top member and 9200 as bottom & middle member and 12mm thick prelaminated board / 5mm thgick black glassfixed on door frame by means of tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 etccomplete including cost, conveyance royalties and taxes of all materials and cost,taxes of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
16 | Supplying M.S.Door,Window made out of M.S.Angle & Square bar of approved design and specification with all cost conveyance taxes etc. complete.As per the direction of the E.I.C. |
17 | Painting two coats withsynthetic enamel paints doors and windows with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & Prequiredetc complete in all respect as per the direction of the Eng.-in-charge |
18 | CC (1:1.5:3) in following works and using 12 mmsize blackhard crusher broken granite stone chips of approved quality from approved quarry including lowerlaying concretewatering and curing etc complete to required level laid in layers not exceeding 150 mm ( 6’’) thick including cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
19 | Supplying,fitting and fixing of window (sliding type) made of alluminium section 9778 as windows frame , section no. 4095 ,4096 and 9777 ,3994 as shutter frame with 5 mm thick black glass as panel fitted withrubber bidding including all fitting & locking arrangement complete including cost, conveyance royalties and taxes of all materials and cost,taxes of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
20 | 16 mm thick cement plaster with cement and sand mortar (1:6 ) finished smooth over inside rough surfaces of brick masonry walls c with wateringand curing including cost, conveyance, royalties and taxes of all materials and cost, conveyance of all labour with T&P required for the work etc complete in all respect s as per the direction of the Engineer in charge. |
21 | Priming one coat with af approved quality of primer of Berger make including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & Prequiredetc complete in all respect as per the direction of the Eng.-in-charge |
22 | Painting two coats with weather shield coat on wall surface with a paint of approved shade including cost, conveyance and taxes of all materials & cost ,conveyance taxes of all labour with T & Prequiredetc complete in all respect as per the direction of the Eng.-in-charge |
23 | Supplying all labour for dismantling brick masonry including stacking of useful material for reuse and removal of debris within 50m initial lead including cost,conveyance,royalties & taxes of all labour with T & P required etc complete as per direction of Engineer in charge |
24 | Supplying all labour with T&P for rolling and compacting to sub grade or formation loosening by scarify of road surface 0.15 mtr depth including watering and rolling by PRR as per specification and direction of the EIC including cost, conveyance and taxes of all materials and cost,conveyance and taxes of all labour and T&P required for the work etc complete as per the direction of the EIC. |
25 | 2.50 cm thick grading concrete(1:2:2) with chichen mesh using sand and bajuri of approved quality includingwatering and curing etc complete to required levelincluding cost, conveyance, royalties and taxes of all materials and cost , conveyance of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
26 | Providing fitting, laying and fixing of approved quality Ceramic glazed floor tileof approved make and shade of premium grade having thickness 6.5 mm to 6.7 mm conforming to IS 13753 for sizes 30cm x 20cm / 20cm x 20cm of special plane / printed series of approved quality & make laid on floors using 25mm thick cement and sand mortar in ( 1:4) and joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing , watering and curing etc including cost conveyance taxes of all materials and cost, conveyance,taxes of all labour with T&P required etc. complete in all respects as per direction of Engineer-in-Charge. |
27 | Supplying all material and labour required for providing centering and shuttering works in F & Petc complete including cost, conveyance royalties and taxes of all materials and cost of all labour with T&P required for the work etc complete in all respects as per the direction of the Engineer in charge. |
28 | Supplying all labour with t & P required for removal of excess earth by mechanical means up to a distance of 5 KM including cost taxes of all labour with T & P required etc complete in all respect as per direction of EIC. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail