|
| 1 | Excavation in foundation and trenches etc. in earth work in all kind of soil such as pick work jumper work,saturated soil including bailing or pumping out water, blasting soft/hard rock, chiseling soft/hard rock where blasting is prohibited in all lifts including trimming and dressing of sides,levelling ofbed, stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15cm. layers including consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated soil as directed in all leads/lifts and shoring strutting,timbering and dewatering where ever required as per direction of the Engineer-in-Charge. |
| 2 | Providing and laying cement concrete 1:6:12 (1cement:6 sand:12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of from work in foundation and plinth complete in all respect with in all leads and lift and as per the entire satisfactionof Engineer-in Charge. |
| 3 | Providing and laying cement concrete 1:3:6 (1cement:3 sand:6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of from work in foundation and plinth complete in all respect with in all leads and lifts and as per the entiresatisfactionof Engineer-in Charge. |
| 4 | Random rubble masnory/ polygonal rubble masonry(uncoursed/brought to courses) with hard stone of apporved quailty in foundation &plinth including levelling up with cement concrete 1:6:12(1Cement :6 sand :12greded stone aggregate) in cement mortor1:6 complete in all respect and as per the direction of Enginer-in-Charge |
| 5 | Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joint in cement mortar 1 : 4 (1 Cement : 4 Sand) with in all leads and lifts. |
| 6 | Providing and laying cement concrete 1:1.5:3 (1cement:1.5 sand : 3graded stone aggregate 20mm nominal size)and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in:- |
| 7 | Foundation , footing basis of columns & the like and mass concrete complete in all respect and as per the direction of Enginer-in-Charge |
| 8 | Wall (any thickness but not less than 0.1 m thickness) attached pillasters, buttresses, plinth and string courses, etc. from top of foundation level upto floor two levelcomplete with in all leads and lifts as per direction of the Engineer-in-Charge. |
| 9 | Providing form work with steel plates3.15mm thick welded with Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fairfinish I/c centring , shuttering , strutting and proping etc.with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4m and removal of the same for insitu- reinforced concrete & plain concrete work in :- |
| 10 | Foundation , footing basis of columns etc. and mass concrete complete in all respect and as per the direction of Enginer-in-Charge |
| 11 | Flat surfaces such as soffits of suspended fioors roofs landing and the like . Floors etc up to 200mm in thickness. |
| 12 | Vartical surface such as walls (any thickness) portion and the like including attached pillers,buteress plinth and staircases and the like. |
| 13 | Providing and laying cement concrete 1: 2 : 4 (1Cement : 2 Sand : 4 graded stone aggregate 20 mm nominal size)and curing complete excluding cost of form work and re-inforcement for reinforced concrete work in:- |
| 14 | Suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and cantilevers up to floor two level with in all leads and lifts as per the direction of Engineer-in-Charge. |
| 15 | Providing tor steelreinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level with in all leads and lifts. |
| 16 | Providing and Fixing precast concrete manhole cover & frame confirming IS-12593-1988 Part-I and IS 12592-1991, part-II, (medium duty) 560 mm diameter in all leads and lifts. |
| 17 | Laying, jointing, testing in trenches and carriage of GMS tubes (light grade) including tube fittings (earth work to be measured and paid for separately) complete in all respect in all lead and lifts. |
| 18 | i) 100 mm dia |
| 19 | i) 65 mm dia |
| 20 | Providing and fixingsand cast iron / cast iron spun spigot and socket soil, waste and ventilating pipe ( lead choket joints to be measured and paid for separately ) 100 mm nominal dia. |
| 21 | i) 65 mm dia |
| 22 | Providing and fixingsand cast iron / cast iron spun fittings cast iron cowl100 mm dia. |
| 23 | Providing and fixing cast iron wheel valve with wheel 100 mm nominal bore with in all leads and lifts. |
| 24 | Manufacturing, supplying, Fabrication and fixing of MS Fabricated protection panel 750mnm x 750 mm made with MS Angle 40x40x4 mm fpr frame, MS Angle 30x30x3 mm fpr cover, MS Sheet(12 gauge) 2.50 mm thick for protection of manhole covers of storage tanks including the cost of cutting and welding og MS angle ,MS flat & mssheet , embedding in RCC slab by drilling hole in MS angle ,& in RCC Slab. provision for providing and fixing sliding door bolt 300x16 mm, MS Handle 100 mm,lock and applying a coat of red lead paint & painting two coat with steel paint (Firoze blue) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer-in Charge. |
| 25 | 1.20 metre heigh fencing (as per approved design) 1.80 metres R.C.C.posts 3 metres centre to centre and R.C.C struts with 7 horizental lines and two diagonalsols of galvanised steel bar bed wire(IS 278-1962 typeI) to 6mm galvanised steel bar niles/ clips with G.I binding wire including cost of Excavation, R.C.C. struts and straining belts and wmbeded in cement concree 1:4:8 (1cement: 4 sand : 8 graded stone aggregate 40mm nominal size ) and curing complete in all respect with manufacturing & Fixing of MS Gate 1.20x1.50 Meter and to the entire satisfation of the Engineer-in-Charge in all leads and lifts. |
| 26 | Brick work using common burunt clay building bricks in supper structurein cement mortor 1:4 ( 1 cement : 4 sand )complete in all respect and as per the direction of Engineer-in-charge. |
| 27 | 40 mm thick cement concrete flooring 1 : 2 : 4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) laid in one layerwith a floating coat of neat cement in all leads and lifts. |
| 28 | 15 mm cement plaster in single coat on rough side of brick / concrete / stone wallsfor interior plastering upto floor two level including arrises internal rounded angles, chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortor 1 : 3 (1 Cement : 3 Sand) with in all leads and lifts. |
| 29 | 6mm thick cement plaster to ceiling in cement mortar 1:3 (1 Cement:3 Sand) complete in all respect. |
| 30 | Boulder filling under floor complete in all respect with in all leads and lifts. |
| 31 | Laying, jointing, testing in trenches and carriage of GMS tubes (light grade) including tube fittings (earth work to be measured and paid for separately) complete in all respect in all lead and lifts. |
| 32 | i) 65 mm dia |
| 33 | Providing and Fixing Cast Iron Sluice Valve of BIR make BIS No. 14846withTable-5 including welding of flanges, Nuts & Bolts and Gasket etc. The sluice valve conforming to IS-780. The dia of valve as mentioned below complete in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge in all leads and lifts. |
| 34 | 65 mm diameter |
| 35 | Providing and placing in horizontal layers filtering media duly graded, screened, cleaned and washed as specified. |
| 36 | Top layer, Find sand (Eff.Size 0.20mm to 0.40 and uniformity co-effcient 2.00 to 3.00 |
| 37 | Second layer, Coarse sand, 3 mm to 6mm |
| 38 | Third layer: Bajri 6mm to 20mm |
| 39 | Fourth layer : Bajri 20mm to 25mm |
| 40 | 5thlayer : Broken stone 50mm to 75mm |
| 41 | Providing and placing Ist class standared bricks in filter bed in two layers so as to make cross drains complete with in all leads and lifts as per direction of Engineer-in-Charge. |
| 42 | Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges, jumb lock jamb, beed and if required angle threshold of mild steel angle of section 50x25 mm or base ties of 1,25 mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel butt hings 2.5 mm thick with gaurds, lock strike plate and shock absorbes as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-charge. Proifile- B complete with in all leads and lifts. |
| 43 | Providing and fixing panneled glazed or panneled and glazed shutters for doors, windows and clerestory windows, including black enamelled iron butt hinges with necessary screws 40 mm thick 2nd class deodar wood complete in all respect and as per the direction of Engineer-in-Charge |
| 44 | White glazed tiles 6 mm thick in flooring cement mortar 1 : 3 (1 Cement : 3 Sand) finished with flush pointing in white cement with in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 45 | White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1 : 3 (1 Cement : 3 Sand) and jointed with cement slurry with in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge. |
| 46 | Distempering with oil bond distemper of approved brand and manufacture (two coats) and of required shade on undecorated wall surfaces to give an even shade sand papered smooth. |
| 47 | White washing with lime on un-decorated wall surfaces (with two coats) to give an even shade including thoroughty brooming the surface to remove all dirt,dust,mortor dirt and other foreign mattercomplete in all respect and as per direction of Engineer-in-charge |
| 48 | Finishing wall with water proofing cement paint of approved brand and manufacture (Two coats) brushing to give an even shade i/c cleaning of oil, dirt, dust and other foreign matters, sand papering and knotting etc. with in all leads and lifts complete in all respect. |
| 49 | Providing and fixing oxidized M.S. sliding door bolts with nuts and screws etc. complete 300x16 mm |
| 50 | Providing and fixing anodised M.S. Tower bolts (Barrel type) with necessary screws etc.complete in all respect and as per direction of Engineer-in-charge.. |
| 51 | (a) 250 x 10 mm. |
| 52 | (a) 150 x 10 mm. |
| 53 | Providing and fixing Oxidized M S Handlewith necessary srews etc complete in all respect and as per direction of Engineer-in-Charge.100 mm |
| 54 | a) 125 mm |
| 55 | Applying priming coat on new steel and steel based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt,and other foreign matter , sand papering and knotting ready mixed paint brushing wood primer pink complete in all respect and as per direction of Engineer-in-charge. |
| 56 | Painting two coats ( excluding priming coat ) on new wood and wood based surfaces with enamel paint to give even shade including cleaning thesurface ofdust and other foreign matter, sand preparing and stopping with enamel paint other than white complete in all respect and as per direction of Engineer-in-charge. |
| 57 | Precast terrazzotiles hydraulic compressed 20 mm thick with marble chips of specified size inflooringcement mortar 1:6 (1cement : 6 sand) jointed with neat cement slurry (Dark shade) |
| 58 | Costructing coursed rubble hammer dressed \"U\" shape oper surface drain with side wall 15x22 cm in cementy mortar 1:6 (1 cement : 6 sand) and inside plastering with cement mortar 1:3 ( 1 cement : 3 sand) i/c earth work and laying 10 cms cement concrete1:5:10( 1cement :5 sand: 10 graded stone aggregate 40mm nominal size) & 7.5 cms cement concrete1:2:4 (1 cement :2 sand :4 graded stone aggregate 20mm nominal size) and finished with a floating coat of neat cement complete as per standared design with in all leads and lifts complete in all respect. |
| 59 | Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 cement :3sand: 6 graded stone aggregate 20mm nominal size) including finishing the top surface of concrete smooth complete in all respect and as per direction of Engineer-in-Charge. |
| 60 | Providing and fixing automatic flushing cistern with a pair of C.I. or M.S. brackets complete with fittings including C.I. syphonic apparatus mosquito proof lid, C.P. brass unions and coupling for connections with inlet, outlet and overflow pipes including cutting holes and making good the same (overflow pipe to be measured and paid for separately) vitreous China 5 litres capacity with in all leads and liftsand to the entire satisfaction of Engineer-in-Charge. |
| 61 | Providing and fixing vitreous China wash down, water closet (European type, W.C. pan) with integral \"P\" or \"S\" trap including jointing the trap with soil pipe in cement mortar 1 : 1 (1 Cement : 1 Sand) (Seat and cover to be measured and paid for separately) white colour with in all leads and liftsand to the entire satisfaction of Engineer-in-Charge. |
| 62 | Providing and fixing 100 mm size P or S trap for water closet (Squatting Pan) including jointing the trap with the pan and soil pipe in cement mortar 1 : 1 (1 Cement : 1 Sand) sand cast iron with in all leads and lifts. |
| 63 | Providing and fixing viterous china wash basin with single hole for pillar tap with CI or MS bracket painted white including cutting hole including good the same excluding fitting Cera sanitary work (cornet) white 550x400 white with in all leads and lifts. |
| 64 | Providing and fixing viterous china padestral for wash basin complete recessed at the basic for reception of pipe and fittings Cera sanitary work (carnet) white (viterous China in white colour) with in all leads and lifts |
| 65 | Providing and fixing of water storage tank sintex having of capacity 500 litres with necessary fittings including over flow pipes, scour pipes etc. inlet and outlet and inside paint of required size for inlet or outletand inside paint of approved quality complete including hoisting complete in all respect with in all leads and lifts. |
| 66 | Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 Kg/Sqcm including fitting the joints with approved adhesive complete with in all leads, lifts and carriage of materials 110 mm nominal bore within all leads and lifts. |
| 67 | Providing and fixing on wall faces PVC door bend (D-Plast) with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive complete 75 mm nominal bore within all leads and lifts. |
| 68 | Fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fittings and clamp including making good the wall ceiling and floor in all leads and lifts 15 mm nominal bore. |
| 69 | Providing and fixing Gun Metal full way wheel valve 15 mm dia with in all leads and lifts. |
| 70 | Providing and fixingcast iron spunsoil, waste and ventilating pipelead caulked joints to be measured and paid for separately100 mm nominal dia. With CI cowl 100 mm dia nominal size with in all leads and lifts. |
| 71 | Providing and fixingbrass bib tap (Superior quality or heavy type) 15 mm dia with in all leads and lifts. |
| 72 | Providing and fixingCP brass soap Dish with CP breckets fixed to wodden plugs with CP brass screws complete in all respect in all leads and lifts. |
| 73 | Wiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable inPVC casing & capping and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. |
| 74 | Group C. |
| 75 | Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable inPVC casing & capping along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. |
| 76 | 2 x 1.50 Sq. mm. |
| 77 | 2 x 4.00 Sq. mm. |
| 78 | Supplying and fixing 3 pin 5/6 amps. Socket outlet on the exists switch box/covers including connections etc. as required. |
| 79 | Supplying and fixing 2 way 5/6 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required. |
| 80 | Supplying and fixing 3 pin 15/16 amps. Socket outlet on the exists switch box/covers including connections etc. as required. |
| 81 | Supplying and fixing 15/16 amps. Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc. as required. |
| 82 | Supplying and fixing wooden box of following size (nominal) on surface or recess with suitable size of phenolic laminated sheet cover of in front as required. |
| 83 | 229 mm.x 102 mm.x 60 mm. deep |
| 84 | 203 mm.x152 mm.x 60 mm. deep |
| 85 | Providing and fixing of CFL 1x23 watt of reputed make in all leads and lifts. |
| 86 | Providing and fixing of CFL 1x5 watt of reputed make in all leads and lifts. |
| 87 | Supplying and Fixing 5 Amps to 32 Amps rating, 240 Volts, Lseries miniature circuit breaker of following poles in the existingMCBDB complete with connections, testing and commissioning etc. as required Cat - A. (Single Pole) |
