|
| 1 | SCHEDULE \"A\" (B/R Works) |
| 2 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 3 | M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed. |
| 4 | S&F angle iron Post and struts in fencing including cutting tops to shape as directed drilling holes for bolting and notching for wires, flat iron fillet (for securing wire mesh) including all necessary drilling, bolting & riveting etccomplete, conforming to Fe-290-0 Gde E-165 complete all as specified and directed. |
| 5 | S&F Mild steel screw bolts (machine made) 12mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 15cm long complete all as specified and directed. |
| 6 | Supply only mild steel in flat, round or square bars, in available lengths as in line wire Fe 410-W (gde-E-250) quality-A complete all as specified and directed. |
| 7 | Supply only chain link MS galvanised fencing 100MM X100MM mesh made out of 10 gauge complete all as specified and directed. |
| 8 | Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc incl provision of binding wire complete all as specified and directed. |
| 9 | S&F Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossingg with and provision of galvanised wire, stapples or steel pins etc complete all as specified and directed. (Each line of wire to be measured). |
| 10 | M&L for Preparation ofnewly untreated steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 11 | Dismantling posts or struts (wood, steel or R.C.C.) in natural ground any section, including taking out embedded portion and making good disturbed ground all as directed. |
| 12 | Dismantling posts or struts (wood, steel or R.C.C.) in cement concrete any section, including taking out embedded portion and making good disturbed ground all as directed. |
| 13 | Dismantling of fencing wire anytype all as directed. |
| 14 | Excavation in trenches not exc 1.50 mtr wide and not exc 1.5 mtr deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc and getting out in loose/soft soil complete all as specified and directed. |
| 15 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil complete all as specified and directed. |
| 16 | Removing excavated material (soil) to a distance exc 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed. |
| 17 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling & mass concrete complete all as specified and directed. |
| 18 | M&L for brick work with old size fly ash bricks with sub class \"B\" built in CM 1:6 straight or curved on plan exc 6 m mean radius complete all as specified and directed. |
| 19 | M&L for Reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc., basement slabs, under-reamed piles and mass concrete etc all as specified and directed. |
| 20 | M&L Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed. |
| 21 | M&L Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 22 | M&L Reinforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 23 | Use & Waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surface of concrete complete all as specified and directed. |
| 24 | Use & Waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surface of concrete complete all as specified and directed. |
| 25 | Use & Waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished surface of concrete complete all as specified and directed. |
| 26 | Use & Waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished surface of concrete complete all as specified and directed. |
| 27 | M&L for TMT bars (Fe-500/ Fe-550D) 10 mm dia & over, cut to length, bent to shape required, including crancking, bending spirallyfor hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 28 | All as per item No. 26.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed. |
| 29 | M&L for Rendering 20mm thickin two layers (10+10mm) externally on fair faces of brick or concrete surfaces in cement mortar 1:4 finished surfaces fair and smooth without using extra cement applying two coats of cement base paint over one coat of alkai resistant priming paint including prepration of new plaster surfaces complete all as specified and directed. |
| 30 | M&L for Rendering 15 mm thick on other than fair faces of brick work or concrete surface in cement mortar (1:6) surface finishedeven & smooth without using extra cement complete all as specified and directed. |
| 31 | M&L for Rendering 5mm thick on ceiling, soffits of chajja, fins in cement mortar (1:3) complete all as specified and directed. |
| 32 | M&L for sand filling under floor or in foundations in layes n. exc 25 cm thick including watering and consolidation all as specified and directed. |
| 33 | M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and directed. |
| 34 | M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as insub base of floor complete all as specified and directed. |
| 35 | M&L for 75 mm thick plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protections, finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3.0 m c/c filled with mastic mortar complete all as specified and directed. |
| 36 | M&L for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc. over 20mm thick screed in cement mortar (1:6) setand jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 37 | M&L for coloured glazed ceramic tiles (350mm x 450mm) x 7 to 8mm thick as in dado/vertical services set and jointed in neat cement slurry and pointed in colouredcement to match the surface including 10mm thick rendering as backing coat in cement mortar (1:4) complete all as specified and directed. |
| 38 | M&L for preparation of new surface of wall and three coat of white wash on wall over one coat of alkai resistant priming paintcomplete all as specified and directed. |
| 39 | M&L for preparation of new surface of ceiling and three coat of white wash on ceiling over one coat of alkai resistant priming paintcomplete all as specified and directed. |
| 40 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 41 | S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 42 | S&Fin repairs steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed. |
| 43 | S&F 4.00 mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed. |
| 44 | S&F 100 mm thick butt hinges, medium weight, mild steeland fixed etc complete all as specified and directed. |
| 45 | S&F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 46 | S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed. |
| 47 | S&F coloured wash down water closet vitreous china pan pedestal pattern white including plastic water closet seat white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 48 | S&F in repairs vitreous china wash hand basin flat back basin white size 530x450mm excluding taps but including CP waste coupling 32mm bore, wase pipe610 long etc a pair of MS bracket and cutting for pinning in ends of brackets complete all as specified and directed. |
| 49 | S&F PVC valveless, syphonic action type, flushing cistern low level, white, with inlet, ball valve,float and handle including brackets capacity 10 ltr with flush pipe 32 mm dia complete all as specified and directed. |
| 50 | S&F galvanised steel water tubing, \"medium grade\" ISI marked galvanised 15mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 51 | S&F galvanised steel water tubing, \"medium grade\" ISI marked, 20mm bore, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 52 | S&F stop valve 15mm bore, cast copper alloy with chromium plated, long body with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 53 | S&F Pillar taps, 15mm bore dia of pipe, fancy type (long neck) cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 54 | S&F PVC connection 15mm bore with 2 nos PTMT nuts 60cm long fixed with all as directed. |
| 55 | S&F Bib taps, 15mm bore cast copper alloy, fancy type, chromium plated (long body) with crtuch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 56 | S&F 15mm brass CP mixer for Mixing HOT & COLD water, screwed down for iron pipe and fixed complete all as specified and as directed. |
| 57 | S&F in repairs Bevelled edge mirror of selected quality of size 600 mm x 450mm mounted on 6 mm thick AC building board of or 6 mm thick with 40mm thick acryic beading etc complete all as specified and as directed |
| 58 | S&F CP tubular towel rail 600 mm long and 20mm dia icluding brackets etc complete all as specified and as directed. |
| 59 | M&L for 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixedcomplete all as specified and directed. |
| 60 | S&F CP soap dish complete all as specified and as directed. |
| 61 | S&F brass chrome finish health faucet with 8mm dia, 1.2m long flexible tube andwall hook complete all as specified and directed. |
| 62 | S&F Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. |
| 63 | S&F in repairsheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 mm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 64 | S&F CP brass shower rose 125 mm dia complete all as specified and directed. |
| 65 | S&F rotational moulded polyethene water storage tank 500 ltrs capacity (cylindrical vertical with closed top) double-layered including inlet, outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc including complete all as specified and as directed. |
| 66 | S&F in 20mm bore, gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe all as specified. |
| 67 | S&F ball brass valve, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule 20 mm bore complete all as specified and directed. |
| 68 | S&F 75mm PVC(SWR) floor trap, plainwith grating including jointing with solvent cement complete all as specified |
| 69 | M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified. |
| 70 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floorscomplete all as specified and directed. |
| 71 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floorscomplete all as specified and directed. |
| 72 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed on wall complete all as specified and directed. |
| 73 | S&F110mm PVC (SWR) junction single (single T) equal or unequal complete all as specified. |
| 74 | S&F 75mm bore of pipe PVC (SWR) Bends (any radius), diminishing pieces or tapers complete all as specified. |
| 75 | S&F 110mm bore of pipe PVC (SWR) Bends (any radius), diminishing pieces or tapers complete all as specified. |
| 76 | S&F PVC (SWR) vent cowl bore of pipe 110mm, complete all as specified. |
| 77 | M&L for brick work with sub-class \"B\" bricks, straight or curved on plan exc 6m mean radius built in cement morter 1:6 complete all as specified and directed. |
| 78 | M&L for plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified and directed. |
| 79 | M&L for reinforced concrete NP2 drain pipe 150mm internal dia laid in trenches on concrete bed and jointed, complete all as specified and directed.(Note:- Excavation, earth work and concrete bed and haunching shall be measured and paid for separately under respective items of BoQ/Sch \"A\") |
| 80 | M&L for PCC 1:2:4 type B-1 (20mm graded stone aggregate) as in surface channel and drain complete all as specifed and directed. |
| 81 | M&L extra for forming fair finished drain or channel of manholes inner girth no exceeding 36cm in cement concrete using extra cement including forms, mould mitered stopped ends etc complete all as specified and directed. |
| 82 | M&L for providing cement concrete 1:2:4 type B-1 (20mm graded stone aggregates) in lintels upto 1.5m clear span, cills, steps: seismic and other similar bands, plinth courses, lacing coureses, parapets and railing upt 60cm in height, copings, kneelers, apexstones, bed plates complete all as specified and directed. |
| 83 | M&L for stand stone slabs on manhole covers, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side andset and in cemnent mortar 1:4 complete, 5cm thick complete all as specified and directed. |
| 84 | SCHEDULE \"A\" (E/M Works) |
| 85 | M&L for concealed point wiring One light point/one fan/light/exjaust/bell point controlled by one switch with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet coverfor fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface all as specified and directed. |
| 86 | All as per item No 84.00 here-in-before but One 3 pin socket outlet, 5 Amp on independent board all as specified and directed. |
| 87 | All as per item No 84.00 here-in-before but One 3 pin socket outlet, 5 Amp on same board all as specified and directed. |
| 88 | S&F Switch piano, flush button type, single pole, one way 6 Amp, 230 volt complete all as specified and directed. |
| 89 | S&F switch socket outlet combination 2 in 1, 5 amp, flush piano universal type controlled by one switch conforming to IS complete all as specified and as directed. |
| 90 | S&F ceiling rose surface bakelite three terminals complete all as specified and as directed. |
| 91 | S&F in replacement of LED Tube Light luminaries with high performance LED with driver 1 x 18W (4 Feet long, Cool day/Warm white)complete all as specified and directed . Make Havells /Bajaj/ CG /Philips. |
| 92 | S & F Building security LED light luminaire fitting 1X15 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including 32 mm GI bracket medium grade 1m long bent to shape including bolt, nut,washer,clam made out of MS flat of size 50X6mm, 4 nos Anchor Bolt of suitable size etc all as specified and as directed. |
| 93 | S&F PVC Exhaust Fan of Size 250mm sweep, 230Volts AC, with connection from existing ceiling rose including cutting hole and making good distrubed surface and fixing arrangement complete all as specified and diercted.(Make:- Havells/ CG / USHA /Polar/Bajaj) |
| 94 | S&F Sheet metal enclosure for MCB, DBs, phosphatised, power coated, double door single pole & Neutral 4 way 240 volt with 200 Amps bus bar at incoming end complete all as specified and directed. |
| 95 | S&F MCB single pole and neutral 240 volts, 20 to 40 Amps, breaking capacity 10KA, 240 Volts \"C\" curve all as specified and directed. Make:- Legrand /Havells/L&T/ ABB |
| 96 | S&F MCB single pole 240 volts, 06 to 32 Amps, breaking capacity 10KA, 240 Volts \"C\" curve all as specified and directed. Make:- Legrand /Havells/L&T/ ABB |
| 97 | M&L for XLPE insulated GI wire/strip armoured electric powercable (Heavy duty) ISI marked with stranded aluminium conductor 1100 volts grade, cross sectional area 10 Sqmm 2 core laid in trenches /poles/on wall complete including necessary cable glands, aluminium lugs duly crimped, termination etc all as specified and directed. |
| 98 | M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated (punned) upto 180mm thickness complete all as specified and as directed. |
| 99 | Supply & Laying Sub Class \"B\" Bricks,old size, well burnt, laid breadth wise along the length of cable laid in trenches over sand cushion for UG cable protection complete all as specified and directed. |
| 100 | Material and labour for galvanized iron tubing 50 mm bore light grade with all fitting for protection of cable, laid in trenches / road cossing incl necessary clamp, bolt/nut if any all as specified and directed.(Note: Excavation, earth workshall be measured and paid separately) |
| 101 | M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised iron earth lead wire 4.00 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron or steel, GI earth wire protected by 15mm bore light grade GI pipe and other end connected to earthing test point or main switch board as directed including funnel with watering pipe of 20mm bore light grade GI, wire mesh, charcoal or coke and common salt in alternate layer of 15cm compacted thickness all around the earth electrodePCC (1:3:6) type C-1 earth pit, cast iron cover and frame, including necessary excavation and earth work and refilling of black soil good conductor of earth and necessary testing complete all as specified and directed and shown on electrical plate No 3 of MES Schedule Part-I complete all as specified and as directed. |
| 102 | (Note : The Scope of Work contained in \"Sch of Credit\" amounting to Rs. 1,14,540.00 (refer Tender Srl Page No 34). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’ |