|
| 1 | Dismantling tile work infloors androofs laidin cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. |
| 2 | Demolishing cement concrete manually/ by mechanical meansincludingdisposal ofmaterial within50 metres lead as per direction of Engineer - in - charge. Nominalconcrete1:3:6orrichermix(i/cequivalent |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable aterial within50metresleadasper directionofEngineer-in- charge. In cement mortar. |
| 4 | Providingandlayingfirst classbrickwork inhalf brick thickinsuperstructureofstandardsize brickswith 1:4 cement mortar (1 cement and4 coursesand) including carriage of bricks up to work site, curing etc all complete. |
| 5 | Dismantling doors, windowsandclerestorywindows (steel or wood) shutter including chowkhats, architrave, holdfastsetc.completeandstacking within50 metres lead : Of area 3 sq. metres and below |
| 6 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber). Floor slab, roofslab, landing, balcony andaccess platform. |
| 7 | Supplying, bending andplacing inpositiontorsteel reinforcement in all R.C.C works including cost of binding wires, all complete. |
| 8 | Providing andLaying inpositionspecifiedgradeof reinforcedcement concreteexcludingthecost of form work,finishingandreinforcements.1:1.5:3Mix (1cement,1.5coarsesand3gradedstoneaggregate 20mm and down nominal gauge) |
| 9 | Gridingandpolishingofprecast terrazo tiles22mm / kota stone 22mm in floor, skirting and stair. |
| 10 | Providing and laying Vitrified tiles in floor with different sizes(thicknessto bespecifiedbythemanufacturer), with water absorption less than 0.08% and conforming to IS:15622,ofapprovedbrand&manufacturer, inall colours and shade, laid with cement based high polymer modifiedquickset tileadhesive(water based) conforming to IS :15477, inaverage 6mm thickness, includinggroutingofjoints(Paymentforgroutingof joints to be made separately).: Size of Tile 600x600 mm |
| 11 | ProvidingandlayingCeramicglazedfloor tilesofsize 300x300 mm (thickness to be specifiedby the manufacturer) of 1st quality conforming to IS : 15622 of approvedmake incolours suchas White,Ivory, Grey, FumeRedBrown, laidon 20mm thickcement mortar 1:4(1Cement:4Coarsesand),Jointing withgrey cement slurry @ 3.3 kg/sqm including pointing the joints withwhitecement and matchingpigment etc., complete. |
| 12 | Providing and fixing Ist quality ceramic glazedwall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades exceptburgundy,bottlegreen,blackofanysizeas approvedbyEngineer-in-Charge,inskirting,risersof stepsanddados,over12mmthickbedofcement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 13 | Providing fitting fixing Fibre Glass reinforced plastic door frames of cross section 90 x 45 mm having single rebate of32mmx15mmtoreceiveshutterof30mm thickness..Thelaminateshallbemouldedwithfire retardant gradeunsaturatedpolyester resinand chopped Mat. Doorframe laminate shall be 2 mm thick and shall be fitted with suitable wooden blocks in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame. |
| 14 | Providing and fixing to existing door shutter 30 mm thick GlassFibreReinforcedPolyester(FRP)paneleddoor shutterofrequiredcolourandapprovedbrandand manufacture,made withfire-retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow railsand styles, with woodenblocksofseasonedwoodinsideatrequired placedfor fixingandfittings,cast monoliticallywith5 mm thick FRP laminate for panels confirming to TADS 6: 1993 and / or IS 14856-2000 including fixing to frames. |
| 15 | Providing and fixing panelling or panelling and glazing in panelledorpanelledandglazedshuttersfordoors, windowsandclerestorywindows(Areaofopening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazedshutters25mmto40mmthick: Flyproof stainless steel grade 304wire gaugewith 0.5mm dia. wireand1.4mmwideaperturewithmatchingwood beading . |
| 16 | Providing andfixing ISI markedflushdoorshutters conformingto IS:2202(Part I)non-decorativetype, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneeringwithvertical grainsor cross bandsand face veneers on both faces of shutters: 30 mm thick including ISImarkedStainlessSteel butt hingeswithnecessary screws |
| 17 | Providing, fitting and fixing. slidingdoor boltswith nuts and screws etc. complete.Size300x16mm: Brass (Chromium Plated) |
| 18 | Providing, fitting and fixing. slidingdoor boltswith nuts and screws etc. complete.Size 300x16mm: Aluminium |
| 19 | Providing, fitting and fixing. Tower bolts 250x10mm with necessary screwetc complete. : Brass(Chromium Plated) |
| 20 | Providing, fitting and fixing. Tower bolts 150x10mm with necessary screwetc complete. : Brass(Chromium Plated) |
| 21 | Providing, fitting and fixing. Tower bolts 250x10mm with necessary screw etc complete.: Aluminium |
| 22 | Providing, fitting and fixing. Tower bolts 150x10mm with necessary screw etc complete.: Aluminium |
| 23 | Providing,fittingandfixing.handles125mmsizewith necessary screwsetccomplete. : Brass(Chromium Plated) |
| 24 | Providing,fittingandfixing.handles125mmsizewith necessary screws etc complete. Aluminium |
| 25 | Providingandapplyingprimingcoat withready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc complete. |
| 26 | ENAMELPAINTS;Providingandpaintingwithready mixed paint of approved quality and shade withtwo or more coats to give an even and smooth shade including clearing the surface complete on new surface. |
| 27 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sectionsand other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottomandsideswithrequiredEPDMrubber/ neoprene gasket etc. Aluminium sections shallbe smooth,rust free,straight,mitredand jointed mechanicallywhereverrequiredincludingcleat angle, Aluminiumsnapbeadingforglazing/paneling,C.P. brass/stainlesssteelscrews, allcompleteasper architectural drawings and the directions of Engineer-in- charge. (Glazing, panelingand dash fasteners to be paid for separately) :For fixed portion: Anodised aluminium (anodised transparent or dyedto requiredshade accordingto IS: 1868, Minimum anodic coating of grade AC 15) |
| 28 | For shuttersofdoors,windows&ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost ofEPDMrubber /neoprenegasketrequired(Fittings shallbepaid forseparately):- Anodisedaluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 29 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item): Withfloat glasspanesof5mm thickness(weight not less than 12.50 kg/ sqm). |
| 30 | Providing andfixing M.S grillsintimberframesof windowswithM.Sflatswithnuts,bolts,andsmooth finishingofweldedjoints/surfacewithGrillsweighing 8.00Kg/sqm as per the direction of Engineer - in- Charge all complete. |
| 31 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes,havingthermal stabilityfor hot&cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittingswithone stepCPVC solvent cement and thecost of cutting chases andmaking goodthe sameincluding testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipe. |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes,havingthermal stabilityfor hot&cold water supply includingall CPVC plain &brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work-25 mm nominal outer dia pipes |
| 33 | Providing, Fitting and fixing Chromium platedfittings of approved quality and size complete: (ESCO ORIGINAL):ANGULAR STOP COCK 15 MM DIA |
| 34 | Providing, Fitting and fixing Chromium platedfittings of approved quality and size complete: (ESCO ORIGINAL):STOP COCK 15 MM DIA (CONCEALED WORKS) |
| 35 | Providing, Fitting and fixing Chromium platedfittings of approved quality and size complete: (ESCO ORIGINAL): BIB COCK LONG BODY 15 MM DIA |
| 36 | Providing, Fitting and fixing Chromium platedfittings of approved quality and size complete: (ESCO ORIGINAL). Connection Pipe. |
| 37 | Providing andfixing whitevitreous chinapedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flushpipe, withmanually controlleddevice(handle lever),conformingtoIS:7231,withallfittingsand fixtures complete, including cutting and making good the wallsandfloorswherever required:W.C. panwith ISI marked white solid plastic seat and lid |
| 38 | Providing, fitting andfixing countertypebasinwith 15mm CP brass pillar taps, 32mm CP brass waste pipe, leador PVC connection,32mmdiaCPbrasscapand unions, complete including cutting and making good the walls wherever required. |
| 39 | P/FstainlesssteelkitchensinkwithCIbrackets,CP brass chain with rubber plug 40mm CP brasswaste, CP brasstapetccompletei/cthefittings, cuttingsand making good the wall wherever required. 610 x 450 x 200 mm. |
| 40 | Providing, Fitting and fixing Chromium platedfittings of approved quality and size complete: (ESCO ORIGINAL);BASIN MIXTURE |
| 41 | Providing, fitting andfixing towelring ofchromium platedbrasscompletewith CPbrass screwand timber cleats. |
| 42 | Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete. :600x20 mm |
| 43 | Providing,fittingandfixing.ofchromiumplatedsoap dish with necessary screw etc all complete. |
| 44 | Providing,fittingandfixingsoil,wasteandvent pipes includingtestingetccomplete.100mmdia.PRINCE / SUPREME or equivalent soil pipe. |
| 45 | Providing, fitting and fixing. bends of various types plain orabandwithaccessdoor,insertionrubber washer 3mm thick bolts and nutscomplete SCIor centrifugally cost spun sands pipes: 100 mm dia. Supreme / Prince |
| 46 | ProvidingandfixingPTMTgrating ofapproved quality and colour.Circular type 100 mm nominal dia. |
| 47 | ProvidingandLayingdampproofcourse40mm thick with cement concrete 1:2:4 ( 1 cement, 2Clean course sand, 4 graded stone aggregate 12.5 mm nominal size) with Recron 3Sof fiber length 6or 12mm (125gm of recron3Sper abag ofcement) asper thedirection in Engineer in Charge. |
| 48 | Neat cement punning. |
| 49 | ProvidingandLaying15mmthickcementplasterof specified mix in single coat including finishingeven and smooth and curing etc all complete. 1:4 Mix |
| 50 | Applying one coat of water thinnable cement primer of approvedbrandandmanufactureonwallsurface: Water thinnable cement primer |
| 51 | Providing and Providing and painting with plastic Emulsionpaintsoneormorecoatsonoldsurfaceof required shade to give even shade in- including brushing thesurfacecleanofall dirt,dust andsmoothenedby sand paper etc complete. |
| 52 | ProvidingandLayinginpositioncementconcreteof specified grade including compacting curing etcall complete: 1:2:4 mix. (1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size) |
| 53 | Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not lessthan1.0sqmof20mmthicklaidover 20mm(average)1:4cmthickbarelaidcement concrete andjointtreatedwithwhite cement, mixed withmatchingpigment,curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete. |
| 54 | Providing andfixing wiremeshinaluminiumdoor, window, ventilatorshuttersandpartitionsetc. with EPDMrubber /neoprenegasket etc. completeas per the architectural drawings and the directions of engineer- in-charge .(Cost of aluminium snap beading shall be paid inbasicitem):Stainlesssteel wireguage(Grade-304) aperture 1.4 mm and 0.50mm dia wire |
| 55 | Providing, Fitting and fixing Chromium platedfittings of approved quality and size complete: (ESCO ORIGINAL). Two way Bib Cock 15 mm dia. |
| 56 | Providing, Fitting and fixing Chromium platedfittings of approved quality and size complete: (ESCO ORIGINAL). Health Faucet |
| 57 | ProvidingandFixingHydraulicdoor closer with accessories and screws complete. |
| 58 | Steel workweldedinbuilt upsections/framedwork, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc.asrequired:Ingratings,frames,guardbar, ladder, railings, brackets, gates and similar works. |
| 59 | Providing,fitting,fixingof24 BWG Pre-painted HULAS sheet roofing with lappingof 150mm(two corrugation) with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including carriage all complete |
| 60 | Providing,fittingandfixinginpositioncollapsible steel shutter withvertical channel (20x10x2)mmand braced withflat irondiagonals(20x 5)mmsizewithtopand bottom rail of T-iron (40x40x6)mm with 40mm dia steel pulley complete with bolts, nuts, locking arrangements, stoppers and handles including applying of priming coat of approved steel primer as per the direction of Engineer - in- Charge all complete: |
