Urgent Maitenance Work Of Board Office Canteen At Vanchiyoor In Trivandrum Urgent Maitenance Work Of Board Office Canteen At Vanchiyoor In Trivandrum
Tender Value
Ref. Documents
Estimated cost
Bid Submission
08 Dec 2021
0 days left
EMD
8400
Bank guarantee accepted
Document Fee
900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Vanchiyoor, Thiruvananthapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Urgent Maitenance Work Of Board Office Canteen At Vanchiyoor In Trivandrum Urgent Maitenance Work Of Board Office Canteen At Vanchiyoor In Trivandrum
BOQ
| Sl. No. | Item Description |
| 1 | APPENDIX |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - inChargeNominal concrete 1:4:8 or leaner mix (i/c equivalent design Mix) ( D S R2016 ,15.2.2. ) |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar ( D S R2016 ,15.7.4 ) |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 metres lead.(D S R201615.23.2 ) For thickness of tiles above 25 mm and up to 40 mm |
| 5 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including Chowkhats, architrave, hold fasts etc complete and stacking within 50 metres leadOf area 3 sq. metres and below( D S R15.12.1.) |
| 6 | Dismantling Aaluminium/Gypsum Partitions,doors, windows, Fixedglazing and False ceiling including disposal of unserviceable surplusmaterial and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. (D SR 15.57) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).( D S R 4.1.8.) |
| 8 | Providing and fixing 1 mm thick M.S. sheet sliding- shutters, with frame and diagonal braces of 40x40x6mm angle iron, 3 mm M.S. gusset plates at the junction and corners, 25 mm dia pulley, 40x40x6 mmangle and T-iron guide at the top and bottom respectively, including applying a priming coat of approved steelprimer(D S R2016 10.4 ) |
| 9 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes ( D S R10.16.1) |
| 10 | Providing and fixing plain multipurpose cement board(Hight pressuresteam cured) with suitable screws for cement particle board in partition / ceilingetc. complete (frame work to be paid seperatately).8mm thick Cement fiber board as per IS: 14862(DSR12.26.1) |
| 11 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (D S R11.36) |
| 12 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (D S R2016, 11.41 .2 ) |
| 13 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxygrout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardenerand 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm ( D S R11.48.2. ) |
| 14 | Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. completeat all levels.Granite of any colour and shade ( D S R8.2.2.2.) |
| 15 | Applying one coat of water thinnable cement primer of approved brandand manufacture on wall surface :Water thinnable cement primer (D S R13.43.1 ) |
| 16 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).( D S R13.46.1. ) |
| 17 | Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or Lhooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint onoverlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mmthick with zinc coating not less than 275 gm/m2(D S R2016, 12.1.1.) |
| 18 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the materials within 50 metreslead ofG.S. Sheet( D S R15.28.1) |
| 19 | Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete(ObservedDataBuildings 50.6.2.2.) |
| 20 | 12 mm cement plaster of mix : 1:4 (1 cement: 4coarse sand)(D S R201613.4.1.) |
| 21 | Removing dry or oil bound distemper, water proofing cement paintand the like by scrapping, sand papering and preparing the surfacesmooth including necessary repairs to scratches etc. complete(D S R2016 14.46) |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.( D S R13.61.1 . ) |
| 23 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 fine sand). ( D S R14.1.1.) |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work. (D S R14.54.1 ) |
| 25 | Finishing walls with Acrylic Smooth exterior paint of required shade:Old work (Two or more coats applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface ( D S R14.66.1) |
| 26 | Wiring for light point/ fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulatedcopper conductor single core cable in surface / recessed steel conduit, with modular switch, modularplate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A( CPW2016ELECTRICAL 1.3.1..) |
| 27 | Engaging Labour for Repair works Electrician (od349057/2020_2021 ) |
| 28 | Supply and fixing Batten LED 20 W 1200 MM WITH NECESSARY ACCESSORIES ETC(od349058/2020_2021) |
AI Tender Summary
Tender Timeline
Nov 26, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 08, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 10, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender