Military Engineer Services-MES has published Comprehensive Maintenance And Repair To Flooring Joinery And Other Alied Works At 21 Signal Gp At Anand Parbat Of Age Br Ii Under Ge North Delhi Cantt10. Submission Date for this Tender is 22-12-2021. Civil Work Tenders in GE North Delhi Cantt-10 Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Dec-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-12-2021 |
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick walls built in cement mortar including raking out joints,hacking for key, scrubbing down with water etc complete all as specifiedand as directed. (G+8 storey) |
| 2 | M&L for 15mm thickReady mix plaster in CM (1:4) on fair/un-even surfaces of brick work or concrete surfaces,using water proofing compound to be finished even and smooth without using extra cement, complete all as specified and directed. (WPC measured separately) |
| 3 | M&L for 15mm thick Ready mix plaster in CM (1:6) on fair/un-even surfaces of brick work or concrete surfaces to be finished even and smooth without using extra cement, complete all as specified and directed. (Make:-Ultra Tech, ACC, Birla) |
| 4 | M&L for 5mm thick Ready mix Plasterin CM (1:3) on ceiling fair/un-even surfaces of brick work or concrete surfaces to be finished even and smooth without using extra cement, complete all as specified and directed. (Make:-Ultra Tech, ACC, Birla) |
| 5 | M&L for preparing newly plastered surfaces of wall and applyingthreecoats of white wash complete all as specified and directed. |
| 6 | M&L for prepartion of newly plastered surface of wall and applying 3 mm thick wall care putty two or more coat to get eeven and smooth surface(Birla white or equivalent)and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.. |
| 7 | M&L for prepartion of newly plastered surface of wall and applying 3 mm thick wall care putty two or more coat to get eeven and smooth surface(Birla white or equivalent)and applying two coats of dry distemper over a coat of primer complete all as specified and directed.. |
| 8 | M/L for preparation of newly plastered surfaces of any description and applying two coats of cement base paint over a coat of primer all as specified and directed. |
| 9 | M&L three coats of white wash on newly plastered surfaces as in ceiling including preparation, complete all as specified |
| 10 | M&L for preparation of old decorated previously treated surfaces of wall by brooming down scrapping down smoke and efflorescent salts etc and applying one coat of white wash on walls complete all as specified and directed by Engineer-in-charge. |
| 11 | M&L for preparation of old decorated previously treated surfaces ofceilingby brooming down scrapping down smoke and efflorescent etc. Completeand applying one coat of white wash complete all as specified and directed. |
| 12 | M&L for preparation of old decorated surfaces of any description and applyingone coats of cement base paint on external wall surface complete all as specified and directed. |
| 13 | M&L for preparation of old decorated previously treated surfaces ofwall by brooming down scrapping down smoke and efflorescent etc.completeand applying two coats of oil bound distemper on wall complete all as specified and directed. |
| 14 | M&L for preparation of old decorated previously treated surfaces ofwall by brooming down scrapping down smoke and efflorescent etc.completeand applying two coats ofdry distemper on wall complete all as specified and directed. |
| 15 | M&L for preparation of old decorated previously treated surfaces ofwall by brooming down scrapping down smoke and efflorescent etc.completeand applying one coats ofdry distemper on wall complete all as specified and directed. |
| 16 | Dismantling of floor, hearth or wall tiling with cement mortar bedding, backingand dispose rubbish out off the premises complete all as specified and directed. |
| 17 | M & L coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 18 | M&Lfor non skidcoloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11Sqm and not exc 0.18Sqm in floors etc, set and jointed in neat cement slurry and pointed inwhite or coloured cement with pigment to match, over and including screed bed 15mm thick in CM 1:6 completeall as specified and directed. |
| 19 | M&Lfor light shade vitrified tiles 9-10 mm thick in floors etc, area of each tile not exc 0.36sqm, set and jointed in neat cement slurry and pointed with white or coloured cement with pigment to match the shade of tile, over and including screed bed 15mm thick in CM 1:6 complete all as apecified and directed. |
| 20 | All as per ser Item No-19 here -in-before but on vertical surface as in dados/skirting over 10mm thick rendering as backing coat in CM 1:4 complete complete all as specified and directed. |
| 21 | Dismantling of old stone broken/cracked stone slabs in laid bedded and pointed in any morter complete all as specified and directed. |
| 22 | M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars,window-cills, cooking platform and like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete including 15 mm thick bedding layer in cement mortar 1:6 as in cooking platform complete all as specified and directed. |
| 23 | Demolition of cement concrete in ground floor (unreinforced) and pavingsincluding tiles etc ,n exc 15cm thickness (below or above ground level) complete all as specified. |
| 24 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains, side guide wall including all necessary form work complete all as specified and directed. |
| 25 | M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. |
| 26 | Add or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. |
| 27 | M&L for plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection/pavment and the like, finish the surfaces even and fair without using extra cement all as directed and specified |
| 28 | M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate, 75mm thick as in sub base cemplete all as directed and specified |
| 29 | M&L Chequered cement concrete tiles 200x200mm by 25 mm thick, with grey cement and no pigments incl over 15 mm thick screed bed in CM 1:6, jointed and pointed in neat cement slurry in floors. |
| 30 | M&L in repair for Ultra design coloured tiles with PU coating of size 300x300x25 mm thick rubber moulded with white cement, as in floors incl over 15 mm thick screed bed in CM 1:6 jointed and pointed in neat cement slurry all as directed.Make: Coral, A-1, Hindustan. |
| 31 | M & L machine precast colour concrete decorative interlocking paver blockof a with grey cement and pigment any shape and size confirming to IS15658-2006 of 60mm thickness M-35 Gde complete all as specified. |
| 32 | M & Lsand filling under floors including watering and consolidation. |
| 33 | Demolitionofprecast concrete articles and prcast concrete blocks walling built in cement morter or cement lime morter complete all as specifiedand as directed. |
| 34 | M & L pre-cast cement concrete kerb stone type B-1(12.50 mm graded Aggregate)of size 300x300x150mm thick and setting in CM 1:4 complete all as specified. |
| 35 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 36 | S&F75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified. |
| 37 | All as per item No 36 above but bore of pipe in 110 mm. |
| 38 | S&Fin repairPVC (SWR) bends any radius bore 75 mm with acess door complete all as specified. |
| 39 | All as peritem No.38 above but bore of pipe in 110 mm. |
| 40 | S & F in repairfor precast fibre reinforced cement concreteManhole cover (Ist quality) including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 600MM dia & 80mmthick complete all as specifiedand as directed. |
| 41 | Demolition of cement concrete (reinforced) of any description and in any position not other wise specifically provided for all as specified. |
| 42 | S & Ffor precastreinforced cement concrete cover slab in 1:2:4 using 20 mm graded stone agg and set in CM 1:4 all as specified and directed by Engineer-in-Charge. |
| 43 | M&L formild steel TMT bars 10 to 12mm dia and over, cut to length, bent to shape required including cranking bending, spirally for hooping end and binding with and incl mild steel wire (annealed) not less than .9mm dia or securing with clips quality confirming Fe 410S or Fe-410O |
| 44 | Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified. |
| 45 | M&L brick work with sub class B bricks straight or curved on plan to any radiusbuilt in CM 1:4 all as specified. |
| 46 | M&L for cement concrete 1:2:4 type B-0, using 12.5mm graded stone aggregate as in coping and similar work incl necessary form work to obtain a smooth finishes complete all as specifiedand as directed. |
| 47 | M/L for providing precast reinforced cement concrete type B0, 1:2:4 using 12.5mm graded aggregate as in jallies 45mm thick (measured solid) set in cement mortar 1:4, cemplete all as directed and specified |
| 48 | Complete removal of old roof treatment incudingcement mortar ( except mudfushka , brick tile ) andremoval of grass, small trees by picking sweeping , cleaning and washing down with water to remove dust etcincuding removing debries out side MOD land ,complete all as specified and directed. |
| 49 | M & L for PCC type B1,1:2:4 ( 20mm graded stone aggt) in roof slab oras leveling course using WPCPD proof 101 LW(+) of Dr fixitor equvalant integral WP admixer @200 ml/bag of cement comlete all as specified and directed (WPC will measured and paid seperatly) |
| 50 | Cutting grooves in brick wall , 75 mm wide and 65 mm deep and shaping horinzontal face of groove with cement mortar 1:3 , complete all as specified and directed |
| 51 | M&L for 15 mm thick cement plasterover the concrete / brick roof surfacesin cement mortar 1:4mixed with liquid water proofing compound@ 200ml per bag WPC (liquid type) , surface finished even and smooth without using extra cement all as specified and directed. Note :- Water proofing additive shall be measured and paid separately. |
| 52 | M & Lfor water proofing treatment of roof with APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. notless than 150 gms/sqm) shall be laid with 100mm side lap/end lap on primed surfaces as per manufacturers instruction , complete all as specified and directed andoverincluding of the following:- |
| 53 | Applying apriming coat of@ 0.30 Kg / Sqm with Bituminous primer for use in water proofing treatment including prepration of surface , complete all as specified and directed . |
| 54 | Applyingevenly a tack coat of industrial hot blown grade bituminen 85/25 @ 1.2 Kg/Sqm including cleaning surfaces over |
| 55 | Applying a coat of heat resisting paint ( aluminium bitumen paint)over APPsurface, complete all as specified and directed . |
| 56 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) of any descriptions not exc 1.5 sqm each complete all as specified and directed. |
| 57 | Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) etc.complete all as specified. |
| 58 | Taking downshutters exc 1sqm but not exc 2 sqm each all as directed. |
| 59 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and makingprovision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket requiredwithtruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief. Note - The rate includes the cost of the materials and labour involved in all the operations described above for fixing of shutters.The cost of anchor bolts or screws for joining the frame is also included in this rate. Only any other hardware ( i. e. tower bolt, sliding door bolt, handle , Glass etc), which may be required, shall be paid for separately. |
| 60 | S&F foranodised aluminium grill (anodised transparent or dyed to required shade accoring to IS : 1868 with minimum anodic coating of grade AC 15) of approved design / pattern, with approved standard section and fixed to the existing window frame with CP . brass / stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening , all complete as per requirement and direction of Engineer- in - charge. |
| 61 | S&F Figured glass 4.0mm thick, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane completed all as specified and directed. |
| 62 | S&F glazing of tinted glass 5.5mm thick in aluminium door window shutters and partitions etc with PVC/neoprene gasket etc Complete all as per specified and directed by Engr-in-Charge. |
| 63 | S&FSolid PVC factory made door frame of size 50x47mm made out of 5mm plain colourPVC sheet, reinforced with MS square tube complete all as specified and directed. |
| 64 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 65 | S & F for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders; framed baluster; walk ways; railings; framework of watertanks and similar work confirming to Fe-290. Gde-E-165 |
| 66 | S&F for30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 67 | S & F for 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated andprepared to receive glass, gauze etcedges of framing plain, chamfered or rounded , fitted with cut and mitered beads for securing wire cloth etc,sizes of members of shutters as specified in SSR Part I, Section 8,clause 8.24(a) complete all as specified and directed. |
| 68 | S&F stainlesssteel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples complete all as specified and directed. |
| 69 | S&F steel windows with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing/gauging bars, dovetailed or welded.complete all as specified. |
| 70 | S&fin 4 mm thick sheet glass , ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and dricted by Engr in Charge. |
| 71 | M & L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 72 | M & L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 73 | S&F for 200mm long aluminium anodised, barrel tower bolt , extruded section complete all as specified. |
| 74 | S&F 75 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 75 | S&F for 150mm size extruded aluminium handle, fabricated type, anodised complete all as specified and directed. |
| 76 | S& F 250 mm long Aluminium alloy, anodised , sliding door bolt with hasp, staple (bolt type)and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast-aluminium alloy and fixed. |
| 77 | S&F in repair, stainlesssteel wire cloth 0.36mm nominal dia of wire and average width ofaperture 1.40mm and fixed with tinned tacks/stainless steel wire staples complete all as specified and directed. |
| 78 | M & L for preparation of old steel surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all asspecified and directed. |
| 79 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads |
| 80 | S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane completeall as specified and directed. |
| 81 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified. |
| 82 | Dismantling framed work timber scantling40 sq cm and over in section and in any position complete all as specified. |
| 83 | S&F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified. |
| 84 | S&F Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified. |
| 85 | S&F steel work in tubler trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 all as specified and direcred. |
| 86 | Supply only PVC low level flushing cistern valveless, 10 ltr capacity syphonic action type with inlet ballvalve, float handle including brackets and (HDPE) flush pipe of 32mm dia with brass nut & washer, PVC connecting pipe, etc. connecting with WC inlet and making good the surface to match with existing complete all as directed and specified. Make :PARRYWARE/CERA |
| 87 | S&F in repairs Plastic water closet seat, black, closed pattern with recessed bottom, & cover & mild steel CP or aluminised hinging device complete all as specified and directed. |
| 88 | S & Fin repairs Health haucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 89 | S& F in repair 15 mm dia brass CP Mixturefor mixing hot and cold waterscrewed down for iron pipe and fixed. |
| 90 | S & F in repairs brass chromium plated shower rose 125mm size Complete all as specified. |
| 91 | S & F in repair CP toilet paper holder with flat recessed type stainless steel complete all as specified. |
| 92 | S&F in repair CP soap dish fixed to wall with suitable rawl plug all as specified and directed in Engr in Charge. |
| 93 | S&F in repair of corner glass self of 5.5mm thickwith chromium plated guard barfixed to wallall as specified and directed by Engr in charge. |
| 94 | S&F in repair of sheet glass shelf assembly consisting of 5,5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long fixed to wall completeall as specified and directed |
| 95 | S&F in repair of 5,5mm thick sheet glass shelf 12 cm wide fixed to wall completeall as specified and directed |
| 96 | S & F in repair Towel ring of CP fixed with and including chromium plated brass screws and wooden /lastic cleats. (minimum weight 90 gms) |
| 97 | S&F in repair frameless looking mirror size 600 mm x 600 mm and 5 mm thick, fixing with4 holes & complete accessories complete all as specified and directed. Make : Modi Float or equivalent |
| 98 | S&F in repair frameless looking mirror size 600 mm x 900 mm and 5 mm thick, fixing with4 holes & complete accessories complete all as specified and directed. Make : Modi Float or equivalent |
| 99 | S&F in repair brass coated aluminium decorative curtain rod 20mm dia ofincluding brackets, side knobs and fixed to wall complete all as specified and directed. |
| 100 | S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 101 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed |
| 102 | S & F in repair 100mm chromium plated grating round shape fixed over floor trap with coloured cement all as directed |
| 103 | S & F in repairstainless steel plate rack made of 0.80 mm thick sheet of size 1200x900x250mm complete all as specified and directed. |
| 104 | DismantlingWall & ceiling boards any thickness, including cover fillets etc. |
| 105 | Taking down anodised aluminum frame work (snap grid) |
| 106 | M & L 4 mm thick size non asbestos fibre cement building boards fixed or laid / inserted to timber/ GI / Aluminium frame work with screws complete all as per manufacturers instructions and as directed. |
| 107 | S&F GI powder coated frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed. |
| 108 | Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 109 | Dismantling boarding,any description, fixed in any position with nails. |
| 110 | S&Fix 18/19mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work completeall as specified and directed. |
| 111 | S&F in repair 75mm Brass Butt hinges, with mild steel hinge pin, bright polished and fixed, typeB-11completeall as specified and directed. |
| 112 | S & Fix in repair Continuous (piano) hinges (width 30 mm) mild steel, bright finish or electrogalvanised. completeall as specified and directed. |
| 113 | S&F in repairs 100mm size extruded brass handles fabricated type polished complete all as specified |
| 114 | S&F in repair Stainleless steel handle 75mmfancy type for cub board shutter complete all as specified and directed. |
| 115 | S&F in repair mild steel magnetic catches and striking plate of 50mm size for kitchen cup board orwardrobe fixed with screw including letting in and fixed complete all as specified and directed . |
| 116 | S & F in repair Drawer channel 10" Telescopic type |
| 117 | S & F in repair Drawer channel 18" Telescopic type |
| 118 | Cleaning and removing all scales and dirt etc fromtanks and from mouths of circulating pipe etc for 35000 ltrs capacity of RCC tanks, complete all as specified and directed. (Up to G +8 Storey) Note:- Quoted rates included the following:- (i) Proper safety measures shall be taken by the contractor. (ii)Skilled tradesman should be trained for carrying out work and properinsurance as per labour laws shall be taken by contractor before executing of work. |
| 119 | Removal of plants/trees of girth n exe 30cm fromroof tops/sides, external walls of bldg, chajjas, wall junctions, junctions of rain water/CI soil/waste pipe junctions including taking out the roots entered in wall/slab surfacesand making good the disturbed surfaced using PCC (1:2:4) type B-0 or cement mortar (1:2) including repairing the GI/CI/PVc pipe joints which were damged during cutting/taking out process to match with the existing and finishing the disturbed surfaces to match with existing including necessary scaffolding/staging upto a height of 15.00 m from the ground level complete all as specified as directed. Notes(i) Any CI/AC/PVC pipes or pipe fittings damaged during the process of work shall be replaced by new one without any extra cost to the department. The decision of the GE in this regard shall be final and binding. (ii)The debris including vegetation plant/trees shall be disposed off to a distance exc 0.5 Km and n.exe 1.00 K m all as directed by engineer -in charge. (iiI) For deciding the girth of the plant/tree the height shall be taken at 30 cm above the slab/wall. (iv)The labour employed by the contractor for carrying out the work shall be provided with safety equipment and quoted shall be deemed to include the same. |
| 120 | Welding in repairs n. exc 2.5cm in length thickness of metal to be welded n exc 6mm |
| 121 | Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for 250 to 500 ltrs capacity of tanks, complete all as specified and directed. |
| 122 | All as per Srl Item No 119 above but exc 500 ltrs and not exc 1000 ltrs. |
| 123 | Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - 50150.00 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
