Military Engineer Services-MES has published Repairs To Flooring And Plastering Works At Garhi Cantt Under Age Br-Ii Of Ge Dehradun. Repairs To Flooring And Plastering Works At Garhi Cantt Under Age Br-Ii Of Ge Dehradun.. Submission Date for this Tender is 17-12-2021. Civil Work Tenders in DEHRADUN Uttarakhand. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floor and paving nexc 15cm thick (below or above ground level) and dispose the debris out of MD land as directed by Engr-in-Charge. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortarbedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | M&L for 75mm thick cement concrete type D-2 1:4:8 (using 40mm graded stone aggregate) as in sub base to receive floor finishescomplete all as specified. |
| 4 | M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded stoneaggregate as in floor topping of hard standing/floor finished even and smoothwithout using extra cement (PCC shall be laid in alternate bays in panels) complete all as specified and directed. |
| 5 | M&L forfactory made prepolished rubber moulded vibromatic Chequred cement concrete tiles 30cmx30cmx22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and colour pigment to match, over and including 15mm thick screed bedding layer in CM (1:6) complete all as specified and directed. |
| 6 | M&L for PCC 1:2:4 type B-1( using 20mm graded aggregate ) as in copping, Kneelers, apex stones bed plates , Kerbs stone, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and formwork complete all as specified. |
| 7 | M&L forcoloured Non Skid Ceramic joint freetiles7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in whiteor coloured cement to match over and including screed bed 15mm thick in CM 1:6complete all as specified and directed. |
| 8 | M&L for coloured Non Skid Ceramic joint free tiles7 to 8mm thick (square/rectangular) as in skirtingeach tiles exceeding 0.11 sqm but not exceeding 0.18 sqm over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 9 | M&L for coloured Non Skid Ceramictiles7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors etc, set and jointed in neat cement slurry and pointed in whiteor coloured cement to match over and including screed bed 15mm thick in CM 1:6complete all as specified and directed. |
| 10 | M&L for coloured Glazed ceramic tiles in vertical surfaces of size 350mm x 250mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 11 | M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc over andincluding screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to matchwith tile complete all as specified and directed. |
| 12 | M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc,over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile complete all as specified and directed. |
| 13 | M&L for heavy duty non skid parking tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in flooring etc,over and including 15 mm thick bedding layer in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 14 | Demolition of Stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 15 | M&L for 18 to 20 mm thick granite stone slab (table rubbed and polished) for cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade stone slab incl 20mm thick screed bedding layer of CM (1:4) complete all as specified and directed. (Note: Edges of slab shall be rounded off and a hole for gas pipe shall be made on cooking platform if reqd) |
| 16 | M&L for Marble work white 18-20 mm thick machine cut, bedded, jointed with white cement 1:2 using marble dust with admixture of pigment to match including grey cement and slurry, cutting and polishing over, rounding the edges, over and including 15mm thick screed in cement mortar (1:6) complete all as specified and directed. |
| 17 | M&L for machine cut kota stone slab as in flooring 18 to 22 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing, over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying stone complete all as specified and directed. |
| 18 | M&L for machine cut kota stone slab18 to 22 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing as in vertical surface ie skirting/ dado, over & including screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:4 for laying stone complete all as specified and directed. |
| 19 | M&L for grinding, rubbing and polishing of old existing kota/ Marble / granite etc to achieve mirror finish complete all as specified and directed. |
| 20 | Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed. |
| 21 | M&Lfor 10 mm thick plaster in CM (1:4) on fair faces of concrete surfaces of ceiling etc finished even and smooth without using extra cement over and including wire mesh to receive plaster where required complete all as specified and directed. |
| 22 | M & L for rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound of cement finished fair faces of brick/concrete surfaces of wall, even and fair without using extra cement complete all as specified and directed. (WPC will be measured and paid separately) |
| 23 | M & L for rendering 15mm thick in patches n exc 3 Sqm in each patch in cement mortar 1:4 mixed with water proofing compound, finished brick/concrete surfaces of wall, even andfair without using extra cement complete all as specified and directed.(WPC will be measured and paid separately) |
| 24 | M & L for rendering 10mm thick in patches n exc 3 Sqm in cement mortar 1:3 mixed with water proofing compound finished concrete surfaces, chajja/ facia even and fair without using extra cement over and including fixing of wire mesh to receive plaster where required complete all as specified. (WPC will be measured and paid separately). |
| 25 | M & L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 26 | Supply only integral waterproofing compound as per manufacturer instructions complete all as specified and directed. |
| 27 | M&L forthree coats of white wash on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed. |
| 28 | M&L forthree coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed. |
| 29 | M&L for preparation of new plastered surfaces of walls and applying two coats ofoil bound distemper over primer coat of approved tint complete all as specified and directed. |
| 30 | M&L for preparation of wall and applying interior grade wall putty 2 to 3mm thick to make the surface smooth as specified and directed. |
| 31 | M&L for preparation of wall and applying exterior grade wall putty 2 to 3mm thick to make the surface smooth as specified and directed. |
| 32 | M&L for two coat of weather proof exterior emulsion paint any tint on brick/concrete wall surfaces,plastered /putty surface over a coat of primer complete all as specified and directed. |
| 33 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness incl cover fillets complete all as specified and directed. |
| 34 | Providing & fixing tiled false ceiling ofDesigner tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, on both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross "T" of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c toform a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm including wall angle of size 24x22x0.40mmand laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200mm c/c along main "T", bottom exposed width of 15mm of all "T"" sections of 3mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width complete at all heights as per directed. |
| 35 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing complete all as specified and directed. |
| 36 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing complete all as specified and directed. |
| 37 | M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed. |
| 38 | Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing "medium grade" with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 39 | Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing "medium grade" with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 40 | S&F in repair short body bib taps, Brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule orto GI socket complete all as specified and directed. |
| 41 | S&F in repair angle valve,15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 42 | S&F in repairs 100mm dia, chromium plated shower rose with or without swivel joints, including fixing to steel pipe or union of 15mm bore complete all as specified & directed. |
| 43 | S&F in repair 08 Litr Dual capacity PVC low level flushing cistern including PVC syphon and float valve withPVC long bend for out let, fixing with WC complete all as specified and directed. |
| 44 | S&F in repairsPVC connection 15mm size with PTMT nuts, of 450 mm long complete all as specified and directed. |
| 45 | Supply and fixed in repair vitreous china wash hand basin including brackets, white size 550 x 400 mm incl cutting for and pinning in ends of brackets, including Waste fittings, brass, chromium plated with long screwed shanks and fly-nuts, flange end bedded in cement complete all as specified and directed. |
| 46 | S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified & directed. |
| 47 | S&F in repair CP Brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provn with connecting legs & flanges complete all as specified and directed. Make : Jaquar Model No CON 281KN, HSN 1929 & OHS 1989/Marc ESS547A & ES 531 (Telephonic shower) ES 549 (Shower) ES (Shower). |
| 48 | S&F CP brass fancy type Pillar Tap High Neck complete all as specified and directed. Make :- Jaquar product code : 5357N or equivalent in Hindware/ Parryware. |
| 49 | S&Fin repair viterous china squatting pan (orissa pattern) long pan size 580x440mm white with integral footrest with cast iron spun 600 mm long "P"trap (SI 3989 1984), set in cement concrete type B-1 (1:2:4) complete (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 50 | S&F in repair vitreous china wash down water closet pan (Padestal pattern) white incl plastic water closet seat covers white closed pattern with flat bottom with mild steel chromium plated hinging device complete all as specified and directed. |
| 51 | S&F in repair PVC Health Faucet with 1 mtr metalic Expandable tube & hook complete all as specified and directed. Make :- JAGUAR CAT Part No-ALD CHR 565 or equivalent in Hindware/ Parryware. |
| 52 | S&F in repair 20 mm dia brass chromium plated tubular towel rail, D type, 60 cm long between flanges fixed with rawl plug completeall as specified and directed. |
| 53 | S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 54 | Taking down of AC or PVC pipe jointed in CM of any dia including fittings complete all as specified and directed. |
| 55 | S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls complete all as specified and directed. |
| 56 | S&F PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls complete all as specified and directed. |
| 57 | S&F PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed. |
| 58 | S&F PVC (SWR) bends of 75 mm dia, any radius complete all as specified and directed. |
| 59 | S&F PVC (SWR) junction single Tee equal or unequal 110 mm dia complete all as specified and directed. |
| 60 | S&F PVC (SWR) junction single Tee equal or unequal 75 mm dia complete all as specified and directed. |
| 61 | S&F 75 mm dia PVC (SWR) multi floor trap, with CP grating including jointing to waste pipe with solvent cement and fixed in cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) complete all as specified and directed. |
| 62 | S&F in repairs PVC waste pipe not less than 60 cm long with PVC coupler forkitchen sink , WHB , Urinal etc complete all as specified and directed. |
| 63 | S&F in repair grating 75/100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
