Addn Altn To Bldg No. 11 Bolton Road, Spl Repairs To Bldg No. 10 At Caw And Provn Of Rev Minor Works At Begumpet, Caw Area Under Ge (Af) Hakimpet Addn Altn To Bldg No. 11 Bolton Road, Spl Repairs To Bldg No. 10 At Caw And Provn Of Rev Minor Works At Beg
Tender Value
47.20 Lakhs
Estimated cost
Bid Submission
23 Dec 2021
0 days left
EMD
94400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
BEGUMPET → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Addn Altn To Bldg No. 11 Bolton Road, Spl Repairs To Bldg No. 10 At Caw And Provn Of Rev Minor Works At Begumpet, Caw Area Under Ge (Af) Hakimpet Addn Altn To Bldg No. 11 Bolton Road, Spl Repairs To Bldg No. 10 At Caw And Provn Of Rev Minor Works At Begumpet, Caw Area Under Ge (Af) Hakimpet
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Dec-2021 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-Dec-2021 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cum, getting out any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm all as specified and directed and removed surplus soil n.exc 50 m distance and deposited where directed. |
| 2 | M&L for Mild steel work in tubular trusses, purlins, vetical posts, PLATES INCL NUTS AND BOLTSincluding special shaped washer etc complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and as directed. |
| 3 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 4 | ditto all as per item above, but as in wall cladding. |
| 5 | M&L for Preparation of New previously untreated surfaces of any description and priming with Red oxide, zinc chrome and two coats of synthetic enamel paint over 10cm in width or girth, not otherwise described |
| 6 | Surfaceexcavation n.exc 30 cm deep and avering 15 cm deep and getting out any type of soil complete all as specified and as directed. |
| 7 | M&L for Broken stone or boulders hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 8 | M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) of 75mm thick as in Sub-floors, Sub-Bases, Floors, plinth protection and Pavings, etc., complete all as specified and as directed. |
| 9 | M&L for Cement concrete typeB-1, 1:2:4 (20mm graded aggregate) of 50 mm thick as in Sub-floors, Sub-Bases, Floors and Pavings, etc., complete all as specified and as directed. |
| 10 | M&L for Forming Contraction (Dummy) joints 50mm deep x 10mm wide, filled with Grade \"A\" sealing compound |
| 11 | M&L for Cement concrete Type D2 1:3:6 (40mm graded aggregate) as in foundations, filling and mass concrete |
| 12 | S & F MSposts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc ; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or rivetting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 13 | Fixing only Chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed. |
| 14 | Supply only Chain link MS galvanised fencing of mesh size(nominal pitch of wire) of 50mm and 3.8mm dia. |
| 15 | S&F Mild steel screw or bolts (machine made) with hexoganal or square heads at one and screwed the other, or screwed both ends each screwed end to be filled with washers and hexogonal or square nut , n exceeding5cm long and diameter of neck 5 to 10mm complete all as specified and directed. |
| 16 | Removing excvated soil to a distance n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and directed. |
| 17 | S&F anodised aluminium Frames powder coatedfor doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specifiec and directed by Engr- in -charge . |
| 18 | S & F anodised aluminiumdoors Shutters powder coating,aluminium section weighing 0.55 Kg/m including necessaryjoining cleat ,glazing clips,rubber neoprene packing,handles 2 nos in each door ,hinges, powder coated anodised aluminium snap beading screwetc,complete allas specified and as directed by Engr- in -charge . |
| 19 | S&F 5.50 mm thick Sheet glass selected quality, in squares exc 0.5 sqm each pane. |
| 20 | M&L 12mm Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work |
| 21 | S & F Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confiRming to Fe 290 Gde E-165 |
| 22 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 23 | M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius using old size bricks built in cement mortar 1:4 complete all as specified and as directed. |
| 24 | M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius using old size bricks built in cement mortar 1:6 complete all as specified and as directed. |
| 25 | M&L for providing precast cement concrete Type B-0, (12.5mm graded aggregate) louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame set in cement mortar 1:4. |
| 26 | M&L for plain Cement Concrete 1:2:4type B-1 using 20mm graded stoneaggregate asin coping ,Benching including necessary form work. |
| 27 | Taking down cement plaster on brick or stone walls/ceilings, etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and as directed |
| 28 | M & L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing surfaces even and smooth without using extra cement. |
| 29 | M&L for preparing new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed. |
| 30 | M&L for preparing old unplastered surfaces of walls and applying two coats of white wash complete all as specified and as directed. |
| 31 | M & L for Cutting holes in brick walls in cement mortar for inserting purlin/truss and making good dismantled portion in cement mortar 1 : 3 or cement concrete 1:2:4 Type B - 1 as required. |
| 32 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 33 | M & L for plain Cement concrete type B-1,1:2:4 (20mm graded aggregate) 25 mm thickin sub base-floor, sub-base, floor and paving complete all as specified and directed. |
| 34 | M & L for Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes. |
| 35 | S&F vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tilesnot exceeding 0.36sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 36 | S&F vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tilesnot exceeding 0.36sqm, as in vertical surfaces etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 37 | Dismantling floor/wall tiling including cement mortar ( but not backing) removing of unserveable tiles from site and rubbish of the premises. |
| 38 | Rendering 10mm thick in CM 1:4 to wall as a backing coat to dados. |
| 39 | M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete as in floors cooking platform etc., |
| 40 | M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 41 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings |
| 42 | Dismantling timber scantling 40 Sqcm and over in section inany position as in unframed work, complete all as specified and directed. |
| 43 | M&L 2nd class hard wood (kail) as in scantling clean sawn and fitted in unframed works incl ceiling etc all as sfd and directed by engr-in-charge. |
| 44 | -ditto- all as above, but except timber scantling (fixing only) the wood retrieved from dismantling shall be reused. |
| 45 | M & L for preparing surfaces of wood based materials, new or old, of any description and girth, not otherwise described & treated with two coat creosote oil complete all as specified & directed. |
| 46 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for coping of roof complete all as specified and directed |
| 47 | M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring benching to drain, coping, bed block etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and as directed. |
| 48 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed. |
| 49 | S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre and S&Ffor hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, M & L Seamless calcium silicate ceiling board made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish, priming the visible surface of ceiling with alkali resistant priming paint and applying 3mm thick wall care putty to obtain a smooth finished surface and preparation of ceiling surfaces and applying two coats of Distemper oil emulsion on ceiling all as specified and as directed. |
| 50 | M&L rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathingfinished even & smooth without using extra cement in CM 1:6, complete all as specified and directed. |
| 51 | M&L rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathingfinished even & smooth without using extra cement in CM 1:4, complete all as specified and directed. |
| 52 | M&L for priming plastered and other surface of wall with alkali resistant priming paint, applying 3mm thick wall care putty on wall finish to obtain a smooth finished surface and preparation of wall surfaces and applying two coats of Distemper oil emulsion all as specified and as directed. |
| 53 | M&L applying two coats of cement based paint over a coat of alkali-resistant priming paint as on new/scrubing of old surfaces. |
| 54 | M & L for preparing surfaces of wood based materials, new or old, of any description and girth, not otherwise described & treated with two coat creosote oil complete all as specified & directed. |
| 55 | Taking down Chowkats or framesexc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed |
| 56 | Taking down Chowkats or framesnot exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed |
| 57 | S/F anodised aluminium window and ventilator shutters,fixed type without sash bar,aluminium section weighing 0.55 kg / m including necessary joining cleats glazing clips,rubber packinpowder coated g,anodised aluminium snap beading,screws etc complete all as specified. |
| 58 | S&F 5mm thick dark tinted glasses of approved superior (one way) quality exc 0.5sqm each pane for alum door/windows. |
| 59 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average widtgh of aperture 1.40mm and fixed with stainless steel wire staples. |
| 60 | S&F door closer hydraulically regulated designation No.3,universal type,suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg and fixed |
| 61 | S&F door closer hydraulically regulated designation No.3,universal type,suitable for door shutters ofupto 700 mm in width and weightnot more than 35 kg and fixed |
| 62 | S & F 4 levers Brass Mortice lock, vertical type, size 100mm |
| 63 | Removing building materials etc outside the MOD land including loading, unloading and stacking at the destination complete all as specified and directed |
| 64 | M&L for coloured Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 65 | S&F Glazed ceramic tiles in vertical surface 350X250X7mm / 450X350X7mm thick coloured designedtiles set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 66 | M&L washing,rubbing down and stopping of distempered and painted surfaces on ceiling and applying alkali resistant priming paint and applying 2mm thickputty finish to obtain smooth fnished ceiling surfaces and applying two coats of distempering to ceiling with distemper oil emulsion including preparation. |
| 67 | Taking down shutters of any description exc. 1 Sq.m and n.exc. 2 Sq.m each. |
| 68 | S&F 35mm thick flush shutter solid core construction with black board core and ply wood face panels commercial type on both sides. |
| 69 | M&L Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer. |
| 70 | M&L for preparation of old surface on wood or wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint |
| 71 | S&F 100 mm long MS butt hinges, medium weight cold rolled. |
| 72 | S&FS&F aluminiumhandles, cast type anodised 100mm. |
| 73 | S&F aluminium anodised barrel/ tower bolts of 150mm extruded section |
| 74 | S & F for 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane |
| 75 | S & F in repairs 150mm length for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 76 | Taking up or down GI tubing incl connections of 20 mm dia bore. |
| 77 | Taking up or down GI tubing incl connections of 15 mm dia bore. |
| 78 | S&F medium grade galvanised iron 20mm bore with all fitting and fixed complete to walls and ceiling or laid in floors. |
| 79 | S&F medium grade galvanised iron 15mm bore with all fitting and fixed complete to walls and ceiling or laid in floors. |
| 80 | Cutting chases, in stone walls, pinning in, making good to facing where required and pointing in cement mortpor 1:3 for concealed water tubing and making good, cuting exc, 10 cm but n.exc 20 cm girth. |
| 81 | Demolition and breaking up drain pipes of 75/100mm dia size |
| 82 | S/F PVC (SWR) 75mm borepipes single socketed in any length with rubber ring joints fixed to walls/floor |
| 83 | S/F PVC (SWR) 110mm borepipes single socketed in any length with rubber ring joints fixed to walls/floor |
| 84 | PVC (SWR)bend 110mm bore |
| 85 | PVC (SWR)bend 75mm bore |
| 86 | PVC(SWR) bend 110mm bore with access door |
| 87 | Demolition of RCC as in chajjas/kitchen palteform and similar suspended work |
| 88 | M&L for Precast RCC 1:2:4 type B1 using 20mm graded stone agg in cover slabs set in cement mortar 1:6 including all necessary form work (Note : Reinforcement shall be measured and paid separately). |
| 89 | S&F for Mild steel bars TMT 10mm and over, cut to length bend to shape required incl cranking bending and binding with mild steel wire (annealed) not less than 0.9 mm dia. |
| 90 | S&FVitrous china wash down water closet (EWC) including 10ltr capacity PVC flushing cisternlow level white with brackts and connections to pipes fixed in repairs and S & F for PVC water closet seatclosed pattern with flat bottom and mild steel chromium plated or aluminised hinging device all as directed and as specified. |
| 91 | S&FUnder table counter wash basin cascad oval shape white 595x420x200 mm makeJaquar CNS-WHT-705 |
| 92 | S&F CP central hole basin mixture with popup waste system with 450mm braded hoses Make Jaquar, CAT No.CON-CHR-169KNB |
| 93 | S & F for Brass chromium plated bottle traps for WHB with inlet and outlet screwed for pipe or connection including necessary packing |
| 94 | S/F CP Angular stop cock 15mm Mk: Jaguar Cat No :CQT-CHR-23053 |
| 95 | S&F PVC conniction 15mm size with PTMT nuts of length 450mm |
| 96 | S & F for fancy type, chromium plated with long shank and cup (concealed type) Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. |
| 97 | S & F Chromium plated two way bib cock with flanges. Mk Jaguar Cat No DRC-CHR-37041 |
| 98 | S & F health faucet with fluxi pipe and hand shover ,the length of hose 1mt fitted to the tap.make JAGUOR Code ALD CHR 565 |
| 99 | S & F for Chromium plated wall mixer 3-in-1 system with provision of for both hand shower & over head shower complete with 115mm long bend pipe on upper side, connecting legs & flanges (without hand and overhead shower) Make :- Jaquar codeNo. CQT-CHR-23281UPR |
| 100 | S & F single flow over head shower 100mm diachromium platedfancy type bottom with rubber holes all as specified and directed fixed in repairs Make-Jaquor code OHS-CHR-1989 |
| 101 | S & F 95mm round shape chromium plated hand shower multi flow with easy flex tube in chrome finish 1.5 m long with nuts. Make Jaguar CAT No.HSA-CHR-1739 & SHA-CHR-571 |
| 102 | S&F cornner glass shelf and frond,circle in design fixed over chromium plated brackets of heavy duty with frond linings with glass fixed in wall with necessary screws make Jaquor CAN-CHR- 1173N |
| 103 | S & FSS toilet paper holder with flap make JAGUOR code no.ACN-CHR-1153N |
| 104 | S & F Soap dish holder Make : Jaguar cat No AKP-CHR-35731P |
| 105 | S & F Single Stainless steel towel rail 600mm longMk: Jaguar Cat No CAN-CHR-1111NM |
| 106 | S/F looking mirror of any sizerectagular fancy type having bevelled boarders of glass fixed to walls with stud pins.Make Modygaurd or Saint gobin complete all as specified by engineer in charge. |
| 107 | S&F PVC (SWR) floor trap plain with grating incl jointing with solvent cement. Dia of outlet 75mm. |
| 108 | M&L for applying french polishing on old wooden surfaces of any description width or grith including preparation |
| 109 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; forfoundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dense soil. |
| 110 | Returning and filling in including spreading levelling watering and well ramming in layer n.exc 25 cm as in hard / dence soil. |
| 111 | Removing excavated materials exc 50 & n.exc 100 m depositing where directed at a level n exc 1.5 M above the starting point, soils. |
| 112 | M&L providing Cement Concrete in foundations, filling and mass concrete type D2 ,1:3:6 (using 40 mm graded aggregate)complete. |
| 113 | M&L for Precast Cement Concrete block masonry with solid blocks type C1, 1:3:6(using 20mm graded aggregate)exc 10 cm in width and setting in Cement mortor 1:4 complete all as specified. |
| 114 | M& L providing Cement Concrete type B1 1:2:4 (using 20 mm graded aggregate) as in copings and similar work including weathering ,slightly rounded or chamfered angles and throating ,as directed. |
| 115 | Providing Cement Concrete in surface channels and drains type B2 1:2:4using 20 mm graded agrregate |
| 116 | M&L Plastering 15 mm thick on fair faces of brick work or concrete surfaces to be finished even & Smooth w/o using extra cement in CM 1:4 on walls complete. |
| 117 | Taking down carefullycopper/ aluminium point wiring (light, fan,socket or power) complete, including fittings & fixtures such as switches with board, ceiling roses, pendents, bell, bell push, lamp holders, regulators, sockets, light fittings etc., removing material from site and making good the disturbed surfaces of walls, floors etc. including touch up painting to match with the existing surface complete all as specified and as directed by the Engineer-in-charge. |
| 118 | Taking down unserviceable Distribution Board/metallic plug & socket boards, along with MCCBs and MCBs of any description and making good the disturbed surfaces of walls to match with existing finishes complete all as specified and as directed by the Engineer-in-charge. |
| 119 | Taking down unserviceable electric energy meter of any discription and deposited to AGE E/M store |
| 120 | S& F AC single phase static energy meter of accuracy class 1.0, 240 V, 50 Hz, single phase with backlit LCD display, of rating 5-30 A (measures and displace with kWh, V,l,kW, six months history of engery & MD in kW).Make: HPLSPPL1320010000OC00 or equvilant in secure /L&T/Jaipur |
| 121 | Point wiring complete with two runs of 1.5 sq mm, single core, PVC insulated, FRLS cable,1100 volts grade with multi-stranded copper conductors, drawn through and including non-metallic med. grade rigid PVC conduit with all conduit accessories (including concealing and finishing to match with the sorroundings/PVC casing and caping) and including provision of 1.5 sqmmPVC insulated FRLS copper cable as earth continuity conductor, fabricated steel terminal box made out of 1.60 mm thick MS sheet concealed in walls and covered with 3mm thick hylum sheetfor fixing the switches / sockets/ regulators etc. all as specified and directed for :- |
| 122 | (a) Onelight pointcontrolled by one way switch. |
| 123 | (a) OneFan pointcontrolled by one way switch. |
| 124 | (f) One 3 pin socket outlet 5 Amps on Independent board. |
| 125 | (d) One 3 pin socket outlet 5 Amps on the same board with other switches. |
| 126 | (d) One bell point controlled by one bell push point independent . |
| 127 | All as per item here-in-before but with 4.0 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4.0 Sq mm copper conductor green in colour as earth continuity conductor complete all as specified and as directed by the Engineer-in-charge. |
| 128 | M&L for sub-main wiring with three runs of 6 sqmm FRLS PVC insulated, unsheathed, multi-stranded, 1100 volts grade, copper conductor cable, single core, drawn through and including with PVC casing and caping complete all as specified and as directed by Engineer-in-charge. Note:- Three runs of 6 Sqmm copper cable and one run of PVC casing and caping shall be measured as one unit length. |
| 129 | All as per item above, but for two runs of 6 sqmm and one run of 6 sqmm with PVC medium grade conduit but concealed in any type of wall and making good.Note:- Two runs of 6 Sqmm copper cable and one run of 6 sqmm and one run of non metallic, med. gr. rigid PVC conduit with all conduit accessories shall be measured as one unit length. |
| 130 | Supply and fix Switch Piano, flush type single pole, one way 5 Amps 240 Volts.Make:Legrand /Crabtree / Anchor / Havells. |
| 131 | Supply and fix, socket 5 Amps flush type 230 V.Make: Legrand / Crabtree / Anchor / Havells. |
| 132 | Supply and fix, Switch socket outlet 6 pin,5& 15 Amps multi purpose 2 in 1 flush type 230V.Make: Legrand / Crabtree / Anchor / Havells. |
| 133 | S&F Ceiling rose PVC/ Polycorbonate insulated body with two to three terminals. |
| 134 | Supply and fix , 20W LED light fitting, 4\", with extruded Al. heat sink, integral driver, energy efficient, ready to use pack etc. complete with all accessories internally pre-wired and fixing the same onand including two Nos. PVC blocks and connecting upwith twin core twisted flexible copper conductor cable of suitable size upto ceiling rose including taking down old one. Make: Havells/Phillips/ CG or equivalent. |
| 135 | Supply and fix , 10W LED light fitting, 2\", with extruded Al. heat sink, integral driver, energy efficient, ready to use pack etc. complete with all accessories internally pre-wired and fixing the same onand including two Nos. PVC blocks and connecting upwith twin core twisted flexible copper conductor cable of suitable size upto ceiling rose including taking down old one. Make: Havells/Phillips/ CG or equivalent. |
| 136 | Taking down exhaust fan of any description, sealing cable ends, dismantling blades, cleaning all dust, applying grease, filling cavities with fillet, painting with synthetic enamel paint by spraying including re-assembling blades andrefixing and connecting up including provision of cable from connector of fan all as specified and as directed. |
| 137 | Supply and Fix , bed side night lamp, adjustable arm type decorative fixed on wall complete on PVC base blocks and connecting with suitable size of flexible cable from connector all as directed by Engineer-in-charge Make: Philips/CG/Havells. |
| 138 | Supply and Fix , LED bulb 9 watt pin type suitable for B-22 camp holder all as directed by Engineer-in-charge Make: Havells LEDADORE9WB22CDL BALL Lamp LHLDEUEBML8R009 OR equivalent in Philips or Crompton graves . |
| 139 | Supply and Fix , ceiling fan 5 star rating energy saving of size 1200 sweep with complete accessories and connecting up including suitable length of down rod including taking down the old ceiling fan all as specified and directed by Engineer-in-charge Make: Legrand / Anchor /Cona/ Havells. |
| 140 | Supply and Fix , Stepped type electronic fan regulator, hum free suitable to control speed of fan from 0 to 100% and connecting all as directed by Engineer-in-charge Make: Legrand / Anchor /Cona/ Havells. |
| 141 | Supply and fix single pole neutral enclsoure with two pin earth plug and socket and concealed in wall with 20 Amps SP MCB including necessary electrical connections and fixing arrangements all as specified and directed for geyser |
| 142 | Supply and fix single pole neutral enclsoure with two pin earth plug and socket and concealed in wall with 30 Amps SP MCB including necessary electrical connections and fixing arrangements all as specified and directed for AC |
| 143 | Pumping down the AC, taking carefully the indoor and outdoor units along with voltage stablizer of split type air conditioner of capacity upto 2.0 TR by disconnecting all electrical connections, suction and discharge lines from its installed position and shifting to another location, making hole into brick/stone wall & filling back with white cement where directed and installingthe indoor and outdoorunits alongwith stablizer at specified location and connecting all the electrical, suction and discharge lines, topping up the gas as required and testing on completion for proper functioning complete all as specified and directed by Engineer-in-Charge. |
| 144 | Supply and fix new copper tubes of suitable size forsuctionand discharge lines for split type air conditioners including necessary brazing, wrapping up puff insulation, testing on completion all as specified and as directed by the Engineer-in-Charge including taking down unserviceable suction and discharge pipe along with insulation from 1.5/2.0 Ton split AC.Note:- (i) One run of suction, one run of discharge pipes shall be measured as one unit length. |
| 145 | Supply and fix new AC drain pipe complete all as specified and directed including taking down drain water pipe from indoor unit. |
| 146 | M&L for sub-main wiring with four runs of 10 sqmm FRLS PVC insulated, unsheathed, multi-stranded, 1100 volts grade, copper conductor cable, single core, drawn through and including concealing type non-metallic med. grade rigid PVC conduit of suitable size with all conduit accessories (including concealing in any type of wall and finishing to match with the sorroundings) complete including two run of 10 Sqmm earth wire all as specified and as directed by Engineer-in-charge. Note:- Four runs of 10 Sqmm + 2 runs of copper cable and one run of non metallic, med. gr. rigid PVC conduit with all conduit accessories shall be measured as one unit length. |
| 147 | All as item above but with two runs of 10 sqmm and 1 run of 10 sqmm Note:- 2 runs of 10 Sqmm + 1 run of copper cable and one run of non metallic, med. gr. rigid PVC conduit with all conduit accessories shall be measured as one unit length. |
| 148 | All as item above but with four runs of 16 sqmm and two runs of 16 sqmm Note:- 4 runs of 16 Sqmm + 2 runs of 16 sqmm copper cable and one run of non metallic, med. gr. rigid PVC conduit with all conduit accessories shall be measured as one unit length. |
| 149 | M&L for earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 Mtr below ground with top edge of the earth plate not less than 1.5 mtr below normal ground level, Earth plate shall be connected with double bolts, nuts, check nuts & washers \"OR\" welded to & includingGI wire 4 mm galvanized iron wire as earth lead, extended upto 7.5 m or upto test terminal point above plinth, drawn only through 15mm dia light gr. GI pipe for protection of galvanized iron wire including excavation, earth work, filling the sorrounding of the earth plate upto 25cm thick layer of charcoal dust and salt,PCC chamber, RCC cover slab, watering pipe 20mm dia bore med. grade, wire net, funnel etc. & testing on completion all as specified in plate No.5 of SSR Pt-I, complete all as specified and as directedincluding breaking and removing the old one . NOTE: a)Earth wire beyond 7.5m or test point and (b) GI Pipe for protection of earthing strip shall be measured and paid seperately under relevant items. |
| 150 | Supply and fix sheet metal enclsoures for vertical distribution board when MCCB used for incoming & MCB for outgoing to be used VTPN 4 way, 415 V double door complete all as specified and as directed by Engineer-in charge. Note: MCCB and MCB will be measured separately Make:Legrand/ HPL / Standard /Havells/Indo-Asian. |
| 151 | Supply and fix sheet metal enclsoures MCB DB SPN 240 V, 8 Way with IP 43 IK-09 protection double door complete with appropriate size bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making disturbed wall surfaces complete all as specified and as directed by Engineer-in charge. Note: MCCB and MCB will be measured separately Make:Legrand/ HPL / Standard /Havells/Indo-Asian. |
| 152 | Supply & fix , MCCB 3 pole , 415V , fixed type 63 Amps with breaking capacity 16 KA suitable for load line DBs with terminating cables by using lugs as required , complete all as specified and directed. |
| 153 | Supply and fixMCBthree pole, 415 V rating 40 Amps with rupturing capacity 10 KA including providing thimble for outgoing cables , complete all as specified and directed. |
| 154 | Supply and fixMCBSP, 240 V rating 5 to 30 Amps with rupturing capacity 10 KA including providing thimble for outgoing cables , complete all as specified and directed. |
| 155 | Supply and fixMCBSPN, 240 V rating 5 to 32 Amps with rupturing capacity 10 KA including providing thimble for outgoing cables , complete all as specified and directed. |
| 156 | Supply and fixMCBSPN, 240 V rating 32 Amps \"C\" curve , complete all as specified and directed. |
| 157 | Supply and fix Modular switch 6A, 1 way, complete all as specified and directed.Make : Legrand/Anchor/Havells/Philips |
| 158 | Supply and fix Modular switch 16A, 1 way, complete all as specified and directed.Make : Legrand/Anchor/Havells/Philips |
| 159 | Supply and fixModularswitch socket outlet 6A, complete all as specified and directed.Make : Legrand/Anchor/Havells/Philips |
| 160 | Supply and fixModularswitch socket outlet 16A, complete all as specified and directed.Make : Legrand/Anchor/Havells/Philips |
| 161 | Supply and fix switch bell push modular, complete all as specified and directed.Make : Legrand/Anchor/Havells/Philips |
| 162 | Supply and fix stepped type fan regulator modular 04 steps 120W-2, complete all as specified and directed.Make : Legrand/Anchor/Havells/Philips |
| 163 | Supply and fix Electric bell/buzzer, ding dong type AC 230 volts, single pole, complete all as specified and directed. |
| 164 | Supply and fix Lamp holder PVC/Polycarbonate with back plate suitable for batten fitting complete all as specified and directed.Make : : Legrand/Anchor/Havells/Philips |
| 165 | Supply and fix Modular TV socket complete all as specified and directed.Make : : Legrand/Anchor/Havells/Philips |
| 166 | Supply and fix Modular Telephone socket complete all as specified and directed.Make : : Legrand/Anchor/Havells/Philips |
| 167 | Supply and fix metal flush box one module white cover plate with frame one module complete all as specified and directed.Make : : Legrand/Anchor/Havells/Philips |
| 168 | Supply and fix metal flush box two module with white cover plate with frame two module complete all as specified and directed.Make : : Legrand/Anchor/Havells/Philips |
| 169 | Supply and fix metal flush box three module with white cover plate with frame three module complete all as specified and directed.Make : : Legrand/Anchor/Havells/Philips |
| 170 | Supply and fix metal flush box four module with white cover plate with frame four module complete all as specified and directed.Make : : Legrand/Anchor/Havells/Philips |
| 171 | Supply and fix metal flush box Eight module with white cover plate with frame Eight module complete all as specified and directed.Make : : Legrand/Anchor/Havells/Philips |
| 172 | M& L for groove cutting concealing the surface conduit pipe in any type of wall including stone masonry and plastering to match with the existing surface. |
| 173 | Taking down the electric Geyser of capacity 25 ltrs/ 50 ltrs carefully from its installed position by disconnecting inlet and outlet water pipes, electrical connections,dismantling the unit, painting with one coat of synthetic enamel paint and refixing in its original position and writing MES No and reconnecting the inlet/ outlet water pipes and testing on completion,complete all as specified and directed. |
| 174 | S&F Exhaust fans, metallic, AC single phase 230/240 volts of size 150 mm sweep with fly guard/louvers shutters including provision of suitable size of flexible cable from ceiling rose or connector to exhaust fan and anchoring arrangement in the provided space to fix the fan all as specified and as directed. Make: Havells (Ventil Air DS) or equivalent in Bajaj/CG |
AI Tender Summary
Tender Timeline
Dec 16, 2021
11:30 IST
Tender Published
Tender notice published.
Completed
Dec 23, 2021
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedDec 23, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 25, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender