Construction For Patel Chowk At Kalpi Road Near Kalpi Bus Stand Orai Distt Jalaun
Tender Value
22.32 Lakhs
Estimated cost
Bid Submission
09 Dec 2021
0 days left
EMD
2.23 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Orai -> Uttar Pradesh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction For Patel Chowk At Kalpi Road Near Kalpi Bus Stand Orai Distt Jalaun
BOQ
| Sl. No. | Item Description |
| 1 | Patel Chowk |
| 2 | R.C.C. work with cement approved coarse sand and 2 cm. (3/4\"\") gauge approved stone ballast in the proportion of 1:1:5:3 in lintels of doors sand windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I binding wire and including necessary centering and shuttering etc. and aslo including supply of all materials, labour & T & P etc. required for proper completion of the work. Binding wire cost being included in the item but for heavier beemS.No286(1) |
| 3 | \"Mild steel or iron in plain work such as reinfored concrete or reinforced brick work (when not include in an over all rates) wrouhgt to required shape as necessary including bending for proper completion of the work and icnluding supply of all steel and wastage & overlaping & hooks.Sl No. 504 |
| 4 | Supply and laying of ordinary soil for embankment to be in 20 cm layers including ramming & dressing the surface to required leveles and slopes As Par Analysis |
| 5 | Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. Pipes 40 mm dia and 450mm long with 150x150x6mm M.S. plate welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size), including necessary excavation of size 250x250x450mm deep for the same in bitumen/ concrete pavement at specified spacing. As par DSR Item No 4.9 (2018) |
| 6 | Painting or Varnishing on wall with one coat of ready mixed priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T & P etc. required for proper completion of the work. As par SI No 641 and 642 |
| 7 | Dismantling reinforcement cement concrete or reinforcement brick work, including stacking of materials as directed by Engineer- in- charge with in a distance of 60 mt ( 200 Feet ) As par S.I No 694 |
| 8 | Mild Steel or Iron work of small sizes and sections such as holding down bolts, hold fasts, tie, rods, gratings etc. wrought to required form, including supply of steel, bolts, nuts and wastage etc. and their fixing required for proper completion of the work. S.I No 502 |
| 9 | Cast cement concrete door sills, chaukhats boundry posts, shelves and similar small work with cement, approved coarse sand and 2 cm. (3/4) gauge approved stone ballast in the proportion of 1:2:4, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I binding wire, and including the cost of binding wire, moulds wire, moulds and all other materials, labour and T & P etc required for proper completion of the work. As per Item No 282 Chapter 5 |
| 10 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :Red sand stone - Exposed face machine cut and table rubbed with rough backing. 50 mm thick.DSR 7.23.2.3/2016 |
| 11 | Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. Red sand stone.DSR 7.33.1/2016 |
| 12 | \"Concrete with 4 cm (1.5\"\") stone ballast fine local sand of 1.25 Fineness modulous and cement in proportion of 8:4:1 in foundation and under floors including supply of all materials labour and T&P etc. required for proper completion of the work. In between R.C.C Ring and existing StructureSI N0. 281 |
| 13 | P/L 20mm white albetta stone flooring over 25mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry including rubbing and polishing complete. Item No - 14.36 Chapter No-14 |
| 14 | First class brick work in 1:6 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials, labour and T & P etc. Required for proper completion of the work. As per S.I. No 303 |
| 15 | R.C.C work with cement approved coarse sand and 2 cm. (3/4) gauge approved stone ballast in the proportion of 1 : 1.5 : 3 in columns and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I binding wire and including supply of all materials, labour T & P etc. Required for proper completion of the work. Binding wire cost being included in the item. As per S.I No - 288(1) |
| 16 | \"Mild steel or iron in plain work such as reinfored concrete or reinforced brick work (when not include in an over all rates) wrouhgt to required shape as necessary including bending for proper completion of the work and icnluding supply of all steel and wastage & overlaping & hooks.Sl No. 504 |
| 17 | Providing and laying 20 mm thick marble tiles in skirting wall and pilars lad on 10 mm thick cement mortar 1 : 3 (1cement: 3 coarse sand) with grey cement slurry mixed with pigment to match the shade of slabs including rubbing and polishing complete. As per S.I No New Item No -1 Chapter - 14 |
| 18 | Dismantling reinforcement cement concrete or reinforcement brick work, including stacking of materials as directed by Engineer- in- charge with in a distance of 60 mt ( 200 Feet ) As par S.I No 694 |
| 19 | \"Concrete with 4 cm (1.5\"\") stone ballast fine local sand of 1.25 Fineness modulous and cement in proportion of 8:4:1 in foundation and under floors including supply of all materials labour and T&P etc. required for proper completion of the work. In between R.C.C Ring and existing StructureSI N0. 281 |
| 20 | First class brick work in 1:4 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials, labour and T & P etc. Required for proper completion of the work. As per S.I. No 305 |
| 21 | Cast cement concrete door sills, chaukhats boundry posts, shelves and similar small work with cement, approved coarse sand and 2 cm. (3/4) gauge approved stone ballast in the proportion of 1:2:4, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I binding wire, and including the cost of binding wire, moulds wire, moulds and all other materials, labour and T & P etc required for proper completion of the work. As per Item No 282 Chapter 5 |
| 22 | Providing and laying 20 mm thick marble tiles in skirting wall and pilars lad on 10 mm thick cement mortar 1 : 3 (1cement: 3 coarse sand) with grey cement slurry mixed with pigment to match the shade of slabs including rubbing and polishing complete. As per S.I No New Item No -1 Chapter - 14 |
| 23 | Supply, Installation, Commissioning of complete 12 wt W-LED solar street lighting with maintenance free lithiumion battery complete system at different locations as proposed by honr\"ble member as per UPNEDA specifications FOR site including five years warrantee with comprehensive maint-enance of complete system & solar Panel Having 25 yrs. Performance warrantee.Including service charge and G.S.T 18% on service charge. complete in all respects. |
| 24 | Supply & fixing of 16 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 360 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. |
| 25 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 170 to 200 Watt. Confirming to IP 66 protection complete in all respect. CAT- AAA |
| 26 | Supply and laying of 10 Sqmm 4 Corealuminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. |
| 27 | Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia 38mm terminal Dia 12 mm ,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified |
| 28 | S& FOf Outdoor Stand Moounted Feeder Pillar , IP 55 made with 2 mm thick CRCA Sheet with 1 no.32 Amp TPN MCB Incomer, Single Dial Time Switch , 22 Amp TPContactor fot the Automatic Switching of Luminaries ,Power Tool Control with 2 No. 9 A Conactor and raise Lower Push button , Incoming 16 Sqmm and Out Going 16 & 2.5 Sqmm Terminals |
| 29 | Numbering of pole As per direction of Engineer In Charge |
| 30 | Supply and fixing of 16 Sqmmplain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. |
| 31 | S & F 2.5 Sqmm 3 core copper Conductor for Connection of FittingComplete |
| 32 | Dismantling reinforcement cement concrete or reinforcement brick work, including stacking of materials as directed by Engineer - in - charge with in a distance of 60 mt. (200 Feet) ( As per PWD CSR 2019 Jhansi Circle) |
| 33 | Supply and laying 50 mm dia G.I. pipe Class B (As per pwd CSR 2019 Jhansi Circle) |
| 34 | Supply , creation and commissioning including testing of a form jet fountain length 20 Feet Approx with 7 nos nozzal complete fitting with U pvc pipe ball, Tee, Albow etc size 1.5 Inch, 1 Inch, 0.75 Inch etc Complete in all respects including G.S.T. (For Fountain) |
| 35 | Supply and fixing including testing of luminaries for foam jet fountain in calour sequencing 7 Nos, 27 W, 12 Volt DC LED Round Light with 9 Led Bulb and 3 colur make it wether and water proof with power cable of required size complete in all respects including G.S.T (For Fountain) |
| 36 | Supply and fixing including testing of 3 hp single face 220 volts horizentale sumer sible pump set with strainers of ISI reputed make. complete in all respects including G.S.T (For Fountain) |
| 37 | Supply and fixing including testing of central panel suitable above sumer pump consist of sheet metal control panel with amp Meetre , Volt Mtr, Starter with on-of switch for pump set and MCB for lighting and heavy duty controllar sequicer (3 Channel) work complete in all respects including G.S.T (For Fountain) |
| 38 | Supply of R.C.C Statue of Sardar Ballabh Bhai Patel Ji includig G.S.T Transportation and Installation with crane etc compelte in all respects. |
AI Tender Summary
Tender Timeline
Nov 24, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 09, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 10, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender