|
| 1 | Earth work in excavation of foundation in hard soil with initial lead and lift including rough dressing and leveling the bed and depositing the soil away as directed by E.I.C . |
| 2 | Sand filling with filling sand inside F and P including watering and ramming, cost of material, labour, conveyance all taxes T and P etc. complete. |
| 3 | Metal concrete (1:4:8) using 40mm size CBG metal with all cost of material, labour, conveyance, royalty, taxes T and P etc. complete. |
| 4 | R.C.C. M-30 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P etc excluding centering shuttering & cost of reinforcement complete. |
| 5 | Rigid smooth centering and shuttering to C.C. work including false work and dismantling them after casting complete in Ground Floor. |
| 6 | Construction of granular sub-base by providing close graded granular sub-base Grading-III material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (5th Revision). |
| 7 | Providing and laying factory made chamfered edge cement concrete paver block of 80mm thick and M-35 grade of concrete of required strength , thickness& size/shape, made by table vibratory method, to attain superior smooth finish using PU or equivalent moulds, laid in required Grey colour & pattern over 50 mm thick compacted bed of coars sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compactionby using plate vibrator, filling the joints with jamuna sand and cutting paver blocks as per required size and pattern, finishing sweeping extra sand in foothpath, parks ,lawns, drive ways or light traffic parking etc. all complete a per manufacturer\"s specification & direction of Engineer-in-Charge: |
| 8 | Collecting,conveying and stacking of good quality laterite moorum at work site and spreading at proposed placeincluding, all cost of material, labour, conveyance, royalty, taxes T and P etc. complete. |
| 9 | Towards Photograph of project, display board etc. |
