Illumination Of Internal Road From Ambe Dhullai Junction To Ambe Village In V. P. Dharbandora Of Sanvordem Constituency
Tender Value
15.96 Lakhs
Estimated cost
Bid Submission
07 Dec 2021
0 days left
EMD
31937
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sanvordem → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Illumination Of Internal Road From Ambe Dhullai Junction To Ambe Village In V. P. Dharbandora Of Sanvordem Constituency
BOQ
| Sl. No. | Item Description |
| 1 | SITC of 6Mtr length decorative octagonal hot dip galvanised pole fabricated from HT steel sections, confirming to BS EN 10025, S-355 JO, with top dia of 70mm A/F and bottom dia of 130mm A/F, having 3mm sheet section thickness alongwith base plate of size 220x 220x12mm (LxBxT), including TS-600 grade J-type M16 x 600mm foundation bolts set along with required tamplate,canopy at top. A Smart pack junction box shallbe provided with 1no 6A MCB on DIN rail and 4pole red strip connector /terminal block (60Arating) suitably enclosed with watertight door with locking arrangement, mounted flushed inside base compartment,havingsuitable entry for drawingtwo or more cables upto 16sqmm. The J bolts shall be reinforced in the RCC foundation(RCC for foundation to be paid separately). Suitable space shall be left to pass cable through the foundations, including cable terminations complete as required. Also including installation of single/double arm GI pipe brackets(1mtr long standard), on pole top section (brackets will be paid separately). The poles shall be of make Transrail, Bajaj, Philips, GE, Crompton only. Transporation from factory to site is inclusive. |
| 2 | Supply of Single arm GI pipe bracket 1000mm long, 48.3mm dia, suitable for 5mtr or 6Mtr high poles for top section (70mm). |
| 3 | Supply of Double arm GI pipe bracket 1000mm long, 48.3mm dia, suitable for 5mtr or 6Mtr high poles for top section (70mm). |
| 4 | S.I.T.C. of72/75/80W LED, Streetlight luminaire with efficient high performance power LEDs, integral driver in pressure die cast metallic housing with heat resistance toughened glass, having IP-66 protection, better optics for uniform light distribution, suitable for mounting on a pole arm bracket of outer dia 30-45mm, along with terminals and other accessories etc, including connections complete as required of makes Bajaj, model: EDGE LED, BRTFG-75W-LEDI-white. //Crompton, model: NEXUS NEO, LSTP-72-CDL-M.//Havells,model: ENDURA CITYLINER, NEO-MPSL-80W-LED-757-PASYBOTG.// Philips, model: Greenline, BRP409-LED-074-CW-HE-MR-FG-S1-PSU-GR.// Wipro, model: SKYLINE, LR02-981-XXX--57-G2-80W-5700k. or equivalent models of above makes only (superseding at the time of execution), as directed by the Engineer-in-charge. |
| 5 | Supply of4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size, 4 Core 16 sq.mm. |
| 6 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. In rocky strata. |
| 7 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe,etc.complete as required. |
| 8 | Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark, of approved brands including accessories and providing masonry enclosure with CI/RCC coverhaving locking /Lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation ofpit of sizenot less than 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c)Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size not less than 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe . g)watering arrangement(plumbing will be paid seperately);In Rocky strata. |
| 9 | Extra for using salt and charcoal for pipe earth electrode as required( 65 Kgs of Charcoal and 5 Kgs of Salt). |
| 10 | Supplying and laying 6 SWG GIwire at 0.5 m below ground level for conductor earth electrode including soldering etc. as required. |
| 11 | Providing & fixing G.I. pipes complete with G.I. fittings including trenching & re-filling etc. (external work), 40 mm nominal bore. |
| 12 | Supply of3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI markconforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size, 3 Core 1.5 sq.mm. |
| 13 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in widthor 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directedwithin a lead of 50 m. Hard rockwhere blasting prohibited, All types of Ordinary rock including all types of laterite rock, blasting prohibited. |
| 14 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 15 | Providing and laying cement concrete 1:4:8 (1cement: 4 coarse sand: 8 graded granitic a basaltic stone aggregate 40 mm nominal size)excluding cost of centering, shuttering and finishing, All works upto plinth level. |
| 16 | 12mm cement plaster 1:5 (1 cement : 5 coarsesand). |
| 17 | Providing TMT steel reinforcement bars of(SAIL, TATA. VIZAG, JSW Steel Ltd.)(Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 18 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, completeas required, 4 x 16 Sq. mm. |
| 19 | Supplying and Fixing HDPE pipe, 32mm dia,fixing pipe firmly in concrete foundation, clamping to RCC structure, complete as required. |
| 20 | S.I.T.C. of outdoor cable termination panel box of size 350mm x 320mm x 400mm (LBH), floor mounted, Flush front, made out of 18swg CRCA sheet, dust & vermin proof, singledoor with locking arrangements and canopy at top, having IP-65 class of protection suitable for operation on 415V, 50Hz, 3phase, and manufactured with relevant IS specifications. The panel box shall be properly derusted degreased and powder coated with Siemens Grey (RAL-7032) paint shade, after surface treatment with seven tank process. The panel shall be mounted on angle iron frame at a height of min 40cm from foundation top surface, suitable leg supports for panel with angle iron frame shall be provided and grouting firmly in the concrete. |
| 21 | The cable entry shall be from bottom with suitable gland plates, Including internal wiring & terminations etc. The panel box shall comprise of perforated iron channel (2.5mtr length) framework at the inside back panel sheet, to mount any switchgears with nut bolts etc., including providing two numbers 4 pole red strip connector blocks (60A rating). Also including transportation from factory to site. |
| 22 | Supply & installation of following sizes, Rewirable Switch Fuse Units, along with its powder coated metallic enclosure, porcelain fuse carrier & base, appropriate rating fuse wire, operating side/ fronthandle, all other accessories, internal connections including drilling holes, nut bolts, backside wooden/metallic support material for mounting , complete as required having ISI mark of make Havells/ Standard / Stanley;Tripple Pole & Neutral, 32A, 415V, 50Hz. |
AI Tender Summary
Tender Timeline
Nov 23, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 09, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender