Public Works Department-PWD has published Eor To I.T.I Jail Road, New Delhi. Sh Set-Up Of Cnc Vertical Milling Machine Lab In Existing Room In Workshop No.1 Eor To I.T.I Jail Road, New Delhi. Sh Set-Up Of Cnc Vertical Milling Machine Lab In Existing Room In Workshop No.1. Submission Date for this Tender is 30-11-2021. Road Work Tenders in work Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Brick work withcommon burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 2 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 3 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade |
| 4 | Area of slab over 0.50 sqm |
| 5 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 6 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 7 | 250x16 mm |
| 8 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 9 | 250x10 mm |
| 10 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 11 | 125 mm |
| 12 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 13 | Twin rubber stopper |
| 14 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. |
| 15 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. |
| 16 | Using M.S. angels 40x40x6 mm for diagonal braces |
| 17 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitredand welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. |
| 18 | Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 19 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 20 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 21 | Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 22 | GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. |
| 23 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : |
| 24 | Two or more coats on new work |
| 25 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 26 | Two or more coats on new work |
| 27 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 28 | Cleaning of terrace/loft water storage tank (inside surface area)upto 2000 litre capacity at all heights with coconut brushes,duster etc., removal of silt, rubbish from the tank and cleaningthe tank with fresh water disinfecting with bleaching powder@ 0.5gm per litre capacity of tank, including marking the dateof cleaning on the side of tank body with the help of stenciland paint and disposing of malba, all complete as per directionof Engineer-in-Charge. (The old date already written on tankshould be removed with paint remover or black paint and ifdate is not written with the stencil or old date is not removeddeduction will be made @ Rs. 0.10 per litre if during cleaningany GI fittings or ball cock is damaged that is to be repairedby contractor at his own cost and nothing extra will be paidon this account) |
| 29 | Cleaning and de silting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 30 | Cleaning of chocked sewer line by diesel running vehiclemounting hydraulic operated high pressure suction cum jettingsewer cleaning machine fitted with pump having 4000 litressuction capacity and 6000 litres water jetting tank capacityincluding skilled operator, supervising engineer etc. forcleaning and partial de silting of manholes and de chockingof sewer lines. Dechocking and flushing of sewer line fromone manhole to another by high pressure jetting systemof 2200 PSI for sewer line from 150mm dia up to 300mm diafor all depth. |
| 31 | Cleaning of underground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shallconsist following operations:-(i) Tank shall be emptied of water by pumping & bottomshall be cleaned of slit and other deposits.(ii) Entire surface area of the sump shall then scrubbedthoroughly with wire brush etc. and pressure washed withwater.(iii) Chlorination of RCC internal surface by liquid chlorine.(iv) The treated surface shall be dried using air jetting andall loose particles shall be removal from the surface.(v) Finally the surface shall be treated with ultravioletradiation etc. as per direction of Engineer-in-Charge. |
| 32 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : For fixed portion |
| 33 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 34 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 35 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 36 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side |
| 37 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 38 | With float glass panes of 5.50 mm thickness |
| 39 | AddCost Index @22.69% on DSR Items i.e.Rs.220389/- |
| 40 | Less @ 9.5% on DSR Items i.e.Rs.270395/- |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
