|
| 1 | Item No.1)Supplying and erecting PVC insulated PVC round sheathed 1.5sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV(1-3-27) |
| 2 | Item No.2) Supplying and erecting LED flood light fitting of 120W, including lamp, with PF > 0.95,class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2(2-5-16) |
| 3 | Item No.3) Supplying and erecting two pole power contactor 230 V, 12 A for time switch complete erected on provided wooden block/ box, with necessary materials.(4-4-2) |
| 4 | Item No.4) Supplying and erecting programmable digital almanac timer microcontroller based with real time clock to operate on derived switching \"\"ON\"\" & switching \"OFF\" street light as per daily sunset and sunrise respectively automatically having 4 digit LED continuous time display, relay output 230 V / 10A with 10 hrs battery backup and manual over drive facility capable to drive different capacity contactors timer erected in provided M.S. box in an approved manner.(4-4-6) |
| 5 | Item No.5) Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SWSWR/ MCB(5-3-3) |
| 6 | Item No.6) Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SWSWR/ MCB(5-3-7) |
| 7 | Item No.7) Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.(6-1-19) |
| 8 | Item No.12) Supplying, erecting & terminating XLPE armoured cable 2 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL(7-1-5) |
| 9 | Item No.13) Supplying & erecting G.I. pipe „A? class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE(7-6-2) |
| 10 | Item No.14) Providing & erecting 9 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 155 mm A/F, top 70 mm A/F on provided foundation as per specification no. OHPL/ OPL(8-3-16) |
| 11 | Item No.8) Supplying and erecting mains with ISI mark WP 2 x 2.5 sq. mm. 1100 V grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG completeerected with required size of porcelain reel insulators and 16 SWG G.I. binding wire.(1-4-1) |
| 12 | Item No.9) Supplying and erecting street light bracket for erection of side entry fitting on pole with 40 mm. dia. =B‘ grade G.I. pipe of required length complete as per specification no. FG-BKT/SLB(2-9-9) |
| 13 | Item No.10) Supplying and erecting LED street light fitting suitable for 60W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FGODF/ FLS-2.(2-5-5) |
| 14 | Item No.11) Supplying, erecting and marking enclosure single pole and neutral distribution board (SPNDB) one pole for SPMCB 1 no on iron/ GIframe as per specification no. SW-SWR/MCBDB(5-4-13) |
| 15 | Item No.15) Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP (9-1-1) |
| 16 | Item No.16) Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable up to and including 16 sq. mm complete as per specification no. CW-EXN-CTR(16-1-2) |
| 17 | Item No.17) Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 9m & 10m high octagonal /conical GI pole).(16-3-10) |
| 18 | Item No.18) Third Party Inspetion/Testing Charges |
