Bids Are Invited For Tool Holder, Material- Steel As Per Sl No.1 Of Annexure I - • Internal Threading Holder With Minimum Cutting Diameter Of Ø 24 Mm • Cutting Length 40 Mm• Length Of Holder Should Be 180 Mm • Shank Size Should Be Ø 20 Mm , Insert As -Assam

Bids Are Invited For Tool Holder, Material- Steel As Per Sl No.1 Of Annexure I - • Internal Threading Holder With Minimum Cutting Diameter Of Ø 24 Mm • Cutting Length 40 Mm• Length Of Holder Should Be 180 Mm • Shank Size Should Be Ø 20 Mm , Insert As Per Sl No.1.1 Of Annexure I - • Suitable To Above Tool Holder Sl No. 1 Pitch 0.5 To 3 Mm & Cutting Edge Length 16Mm• 60° Partial V-Profile Threading Insert , Clamping Screw As Per Sl No.1.2 Of Annexure I - • Suitable To Above Tool Holder Sl No. 1 Pitch 0.5 To 3 Mm & Cutting Edge Length 16 Mm , Torx Key As Per Sl No.1.3 Of Annexure I - • Suitable To Above Tool Holder Sl No. 1 Pitch 0.5 To 3 Mm & Cutting Edge Length 16 Mm , Tool Holder, Material- Steel Bodyas Per Sl No.2 Of Annexure I - • Internal Grooving Holder With Minimum Cutting Diameter Of 25 Mm• Cutting Length 50 Mm• Length Of The Holder Should Be 200 Mm• Shank Size Ø 25 Mm , Inserts As Per Sl No.2.1 Ofannexure I - ·  Suitable To Above Tool Holder Sl No. 2 Thickness Of 2 Mm , Clamping Screw As Per Sl No.2.2 Of Annexure I - ·  Suitable To Above Tool Holder Sl No. 2 Thickness Of- 2 Mm , Handle Key As Per Sl No. 2.3 Of Annexure I - • Suitable To Above Tool Holder Sl No. 2 Thickness Of 2 Mm , Tool Holder, Material- Steel Body As Per Sl No. 3 Of Annexure I - • Internal Grooving With Minimum Cutting Diameter Of 32 Mm• Cutting Length 62 Mm• Length Of The Holder Should Be 250 Mm• Shank Dia Ø 32 Mm , Inserts As Per Sl No.3.1 Of Annexure I - ·Suitable To Above Tool Holder Sl No. 3 Thickness Of- 2 Mm , Clamping Screw As Per Sl No. 3.2 Of Annexure I - · Suitable To Above Tool Holder Sl No. 3 Thickness Of 2 Mm , Handle Key As Per Sl No. 3.3 Of Annexure I - ·Suitable To Above Tool Holder Sl No. 3 Thickness Of 2 Mm , Tool Holder, Material- Carbide Body As Per Sl No.4 Of Annexure I - • Boring Bar With Minimum Cutting Diameter Of Ø 20 Mm• Length Of The Boring Bar Should Be 200 Mm• Shank Diameter Ø 16 Mm , Inserts As Per Sl No.4.1 Of Annexure I - • Suitable To The Above Boring Bar With Sl No. 4, Cutting Edge Length 9 Mm& Adapter Outer Dia Ø 40 Mm , Clamping Screw As Per Sl No. 4.2 Of Annexure I - • Suitable To The Above Boring Bar With Sl No. 4, Cutting Edge Length 9 Mm & Adapter Outer Dia Ø 40 Mm , Torx Key As Per Sl No. 4.3 Of Annexure I - • Suitable To The Above Boring Bar With Sl No. 4, Cutting Edge Length 9 Mm 3& Adapter Outer Dia Ø 40 Mm , Turret Sleeve With Collar As Per Sl No.4.4 Of Annexure I - • Turret Sleeve With Collar Ø40 X 85Mm. Bore Size Should Be Suitable To The Boring Bar. , Tool Holder, Material- Steel Body As Per Sl No. 5 Of Annexure I - • Boring Bar With Minimum Cutting Diameter Ø 8.5 Mm• Length Of The Boring Bar Should Be 80 Mm• Shank Diameter Should Be Ø6 Mm , Inserts As Per Sl No.5.1 Of Annexure I - • Suitable To The Above Boring Bar With Sl No. 5 Cutting Edge Length 6 Mm & Adapter Outer Dia Should Be Ø 40 Mm , Clamping Screw As Per Sl No. 5.2 Of Annexure I - Suitable To The Above Boring Bar With Sl No. 5 Cutting Edge Length 6 Mm & Adapter Outer Dia Should Be Ø 40 Mm , Torx Key As Per Sl No. 5.3 Of Annexure I - • Suitable To The Above Boring Bar With Sl No. 5 Cutting Edge Length 6 Mm & Adapter Outer Dia Should Be Ø 40 Mm , Turret Sleeve With Collar As Per Sl No.5.4 Of Annexure I - • Turret Sleeve With Collar Ø40 X 85Mm. Bore Size Should Be Suitable To The Boring Bar. Total Quantity : 1

Refer document

Refer document