Annual Repair And Maintenance Of To Lwss Shimla ( Sh:-Complete Rewinding / Repairingof Three Phasebhel Make Motor 925Hp / 690Kw, 1485Rpm Heaving Sr. No. 4000885 / - / 03 Slip Ring Type Old Model Motor, Insulation & Steel Rewinding Of Sta, Gumma-Himachal Pradesh
TDR : 29979880
Tender Notice
BOQ
Expired
Gumma
Himachal Pradesh
Annual Repair And Maintenance Of To Lwss Shimla ( Sh:-Complete Rewinding / Repairingof Three Phasebhel Make Motor 925Hp / 690Kw, 1485Rpm Heaving Sr. No. 4000885 / - / 03 Slip Ring Type Old Model Motor, Insulation & Steel Rewinding Of Sta
Name of work:-A/R & M/O to LWSS Shimla (SH:-Complete Rewinding /Repairingof three phaseBHEL make Motor 925HP/ 690KW, 1485RPM heaving Sr. No. 4000885/-/03 slip ring type old model motor, Insulation & Steelrewinding of stator &rotor, dynamic balancing of rotor, P/F of DE & NDE ball bearing 226ECJ/3,6226-C3 DE & NDE bearing NU 226ECJ-C3,assembling,testingcompleteat bed No 2Drabla Pumping Station)
Sl. No.
Item Description
1
Complete rewinding of Stator 690 KW 1485 RPM 50 HZ 3 Phase induction motor including cost of winding insulation material removal of old winding with new winding material and allied job complete material including carriage of material in all leads and lifts with all respect as per direction of Engineer- in-Charge.
2
Complete rewinding of Rotor of slip ring motor of BHEL make 2.2 KV motor 690KW/925HP including cost of winding ,insulation material,removing of old winding and rewinding with new winding material and allied jobs/material all leads and lifts etc., complete in all respect and as per the direction of Engineer-in-Charge.
3
Dismantling & Cleaning of Stator and Rotor. Removal of old winding and insulating material complete in all respectwith allleads and liftsas per the direction of Engineer In Charge.
4
Providing and fixing copper cable 185mm2 in rotor and stator complete connection with all lead lifts as per the direction of Engineer In Charge.
5
Transportation charge of motor from site to workshop and back including carriage of material in all leads and lifts as per the direction of Engineer In Charge.
6
P/F bearing at drive end No.NU-226 ECG-C3 SKF make complete in all respect as per direction of Engineer-In-Charge.
7
P/F Bearing at drive end No.6226-C3 SKF make complete in all respect as per direction of Engineer-In -Charge.
8
Dynamic balancing of Rotor after rewinding complete in all respect as per direction of Engineer-In -charge.
9
Reclamation of DE and NE side bearing,hosing including all leads and lifts complete in all respect as per the direction of Engineer In Charge.
10
Installation of motor on bed and precision and longitudinal as well as axial allignmentof motor with pump shaft with suitable precion measuring devices like dial gauge stainless steel shims including manual and mechanical loading and unloading including all leads and lifts complete in all respect as per direction of Engineer In Charge.
11
Testing of motor on no load and full load condition including cable connection and commissioning of motor at site including all leads and lifts complete in all respect.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
