Military Engineer Services-MES has published Comprehensive Maint And Repair Of Kitchen Equipments And Connected Works At Nda Khadakwasla. Submission Date for this Tender is 29-11-2021. Kitchen Equipment Tenders in GE NDA KHADAKWASLA Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Preventive maintenance and servicing and checking of Kitchen equipments and identify the defects as and when required required for round the clock functioning, testing of all components/parts, wiring etc complete all as directed by Engineer-in-Charge.There are total 05 Nos of kitchen including bakery, pantry and Sqns tea room at Sqn bldgs. The detail of kitchen equipment/machine installed at cadet mess are as under:- (a) Boiling Pans, Bulk Cooker, Brat Pan Tilting gear, Deep Fat Fryer, Veggie Washer, Bread Toaster, Dough kneading machine, Potato peeler, Meat mincer, shallow egg fryer, Dish washing machine conveyer type, Dish washing machine hood type, scornplate, Buffet Counter cum refrigerator, frying pan, Hot plate griller, Bread slicing machine, Idali steamer,pulve riser, Egg Beater, spiral mixer, Masalagrinder, Sandwitch griller, Combi Oven, Rotary Oven, Muffing Dopping Machine, Humidifying chamber, Four door refrigerator, Tandoor Charcoal heated, Tea Boiler and Hot cup boards at Sqn Building etc (Total 181 Nos kitchen equipments). Note: (i)This Job must be done through competent and well experience technician/repairers.No equipment/ machine will be left unserviceable for more than 24 Hours. (ii) If any equipment/machine cannot be repaired at site and required to send them to civil workshop, the contractor shall be responsible for Loading, unloading & transportation of the equipment from site to civil workshop and after got repaired re-installed at their original position/site without any extra cost to the department. (iii If any equipment/machine is found unserviceable for more than 24 Hours from the time it was reported to the contractor in writing during the term of this contract recovery of Rupees 500/- per such unserviceable equipment per day will be imposed and the amount will be recovered from the amount due to the contractor.Regarding this the decision of GE will be final and binding. |
| 2 | S & F in replacement heating element 1200 mm long straight type of capacity 2.0 KW, single phase, 230V, 50 HZ AC Supply, suitable/compatible to existing ovens /hot cup boards etc complete all as directed. |
| 3 | S & F in replacement heating element 1500 mm long straight type of capacity 2.0 KW, single phase, 230V, 50 HZ AC Supply, suitable/compatible to existing ovens /hot cup boards etc complete all as directed. |
| 4 | S & F in replacement heating element 600 mm long straight type of capacity 1.0 KW, single phase, 230V, 50 HZ AC Supply, suitable/compatible to existing Boiling Pan/Milk Boiler/hot cup boards etc complete all as directed. |
| 5 | S & F in replacement heating element 750 mm long straight type of capacity 1.0 KW, single phase, 230V, 50 HZ AC Supply, suitable/compatible to existing Bread Toaster complete all as directed. |
| 6 | S & F in replacement heating element 1200 mm long bend type of capacity 1.0 KW, single phase, 230V, 50 HZ AC Supply, suitable/compatible to existing Boiling Pan/Brat Pan complete all as directed. |
| 7 | S & F in replacement Industrial water immersion heater of capacity 3 KW, 415V, 220mm depth of immersion size 1 ½ BSP flanged type suitable /compatible to existing kitchen equipment complete all as directed. |
| 8 | S & F in replacementrotary switch with knob63 Amps 415 Volts, 3 phase 50 HZ AC Supply, suitable/compatible to existing boiling pan/brat pan tilting gear complete. |
| 9 | S & F in replacement rotary switch with knob40 Amps 415 Volts 3 Phase 50 HZ AC Supply, suitable/compatible to existing frying pan, masala grinder, hot cupboard, toater griller etc complete. |
| 10 | S & F in replacementThermostatic switch, stem type, 50 degree Centigrade to 120 degree Centigrade, suitable/compatible to existing Bread Toaster, Tea boiler, hot cupboard etc complete. |
| 11 | S & F in replacementtoggle switchof 40 Amps, 230 Volts, suitable/compatible to existing bread toaster, tea boiler, hot case etc complete. |
| 12 | S & F in replacement LED indicating lamps round type 230 volts, suitable/compatible to existing kitchen equipments complete as directed. |
| 13 | S & F in replacementmain switch TPN (S-D-F) 32 Amp capacity in steel sheet enclosure including HRC fuse link and suitable for wall /Angle Iron frame including mounting arrangements complete as directed. |
| 14 | S & F in replacementmain switch TPN (S-D-F) 63 Amp capacity in steel sheet enclosure including HRC fuse link and suitable for wall /Angle Iron frame including mounting arrangements complete as directed. |
| 15 | S & F in replacementmain switch TPN (S-D-F) 125 Amp capacity in steel sheet enclosure including HRC fuse link and suitable for wall /Angle Iron frame including mounting arrangements complete as directed. |
| 16 | S & F in replacement3 Pole Power Contractor, 50 Hz, 415 V, AC supply, 32 Amps, MO 12 Type with 01 NO + 01 NC complete as directed. |
| 17 | S & F in replacement 3 Pole Power Contractor, 50 Hz, 415 V, AC supply, 32 Amps, MO 18 Type with 01 NO + 01 NC complete as directed. |
| 18 | S & F in replacement Outgoing Electronic Protection Relay 0.15 - 0.75 type REO 1.1G direct mounting on MO contactor complete as directed. |
| 19 | S & F in replacement Contactor ML 2.0, 63 Amps, 415 Volts, 50 HZ, AC, suitable/compatible for existing Brat Pan/Boiling Pan tilting gear etc complete all as directed. |
| 20 | S & F in replacementDOL starter Mk-I, suitable for 3 phase, 63 Amp, 415 volts, 50 HZ, AC, complete all as directed. |
| 21 | S & F in replacement Male/Female connectors suitable for 3 ph, 415 Volts, 50 Hz AC made out of porcelain/china clay with brass nut bolts etc |
| 22 | S & F in replacement multistranded copper conductor wire teflon coated/insulated, fire proof/heat resistant, suitable for 660/1100 volts grade of size 6 Sqmm single core compele as directed. |
| 23 | S & F in replacement multistranded copper conductor wire teflon coated/insulated, fire proof/heat resistant, suitable for 660/1100 volts grade of size 4 Sqmm single core compele as directed. |
| 24 | S & F in replacement Nichrome Coil of 22/24 SWG size, 230 Volts, suitable/compatible for existing frying pan/scrone plate etc compele as directed. |
| 25 | S & F in replacement copper terminal lugs/thimbles, suitable for 4 sqmm copper conductor complete as directed. |
| 26 | S & F in replacementcopper terminal lugs/thimbles, suitable for 6 sqmm copper conductor complete as directed. |
| 27 | S & F in replacement copper terminal lugs, suitable for 10 sqmm copper conductor complete as directed. |
| 28 | S & F in replacement racks of suitable size/shapes made out of 5 to 6 mm dia, MS rods duly spot welded of size 505 x 505 x 120mm (approx) as per sample given including PVC coating on these racks, suitable for existing dish washing machine all as directed. |
| 29 | S & F in replacement bread cutting blades made out of high potential steel as per existing size/make or suitable/compatible to existing Bread slicing machine complete all as directed. |
| 30 | S & F in replacement blades of different sizes made out of high potential steel, suitable/compatible to existing meat mincer machine of capacity 320 Kg/hr complete all as directed. |
| 31 | S & F in replacement blades made out of high potential steel as per existing size/make or suitable/compatible to existing Pulveriser machine Capacity 45 Kg/hr complete all as directed. |
| 32 | S & F in replacement asbestos/rock wool mild boards of 4mm thick, make/cut to shape as suitable/compatible to existing Tea/Milk Boiler/Brat pan complete all as directed. |
| 33 | S & F in replacement GI sheet of 20 gauge,make/cut to shape as required for outer cover for inner container, suitable/compatible to existing Tea/Milk Boiler/Brat pan complete all as directed. |
| 34 | S & F in replacement SS 304 grade steel sheet of 2 mm thick, make/cut to shape as required for inner container, suitable/compatible to existing Tea/Milk Boiler/Brat pan complete all as directed. |
| 35 | S & F in replacement SS 204 grade steel sheet of 1.6 mm thick, make/cut to shape as required for bottom plate, suitable/compatible to existing Tea/Milk Boiler/Brat pan complete all as directed. |
| 36 | S & F in replacementstainless steel food grain valve size1 ½“ dia heavy duty comprising of valve unit with shut/open handle, S/S elbow suitable for existing Boiling/Brat pan etc. |
| 37 | S & F in replacement stainless steel food grain valve size 3/4“ dia heavy duty comprising of valve unit with shut/open handle, S/S elbow suitable for existing Tea Boiler at Sqn Tea Room. |
| 38 | S & F in replacement 10 sqmm 3 core multistranded Copper Cable, 1100 Volts PVC insulated FRLS grade complete all as specified and directed. |
| 39 | S & F in replacement6 sqmm 4 core multistranded Copper Cable, 1100 Volts PVC insulated FRLS grade complete all as specified and directed. |
| 40 | S & F in replacement10 sqmm 4 core multistranded Copper Cable, 1100 Volts PVC insulated FRLS grade complete all as specified and directed. |
| 41 | S & F in replacement heating element/air heater spiral type, 2.0 KW capacity, 1-ph, 240 V, 50 Hz, AC supply, suitable/compatible to existing Tea boiler complete all as directed. |
| 42 | S & F in replacement base plate /sheet made up of SS 304 grade sheet, 2 mm thick, 350mm dia suitable/compatible for mounting/fixing of spiral air heater of 2 KW, 230 V capacity of existing Tea boiler including cutting welding etc complete all as directed. |
| 43 | S & F in replacement CP flexible inner PVC braided pipe, superior quality of size ¼” dia x 1.5 mtr long alongwith threaded adopters at both end suitable/compatible to existing boiling/Brat pan etc complete as directed. |
| 44 | S & F in replacement industrial oil head resistance `V’ Belt, size A-42/46/65, suitable/compatible to existing aatta khedker, spiral mixer, floor shifter machine etc copmplete. |
| 45 | S & F in replacementindustrial oil head resistance `V’ Belt, size B-50/53/55, suitable/compatible to existing Masala Grinder, Pulvariser, wet grinder machine etc copmplete. |
| 46 | S & F in replacementBall/Roller bearing No. 6204/6205/6206, ISI Marked,suitable/compatible to existing kitchen equipments. |
| 47 | S & F in replacementBall/Roller bearing No. 3309/ 3310, suitable/compatible to existing Rotary Oven Motor/Blower etc complete. |
| 48 | S & F in replacementstainless steel wash water filter of size 320 x 220 mm x 3mm (approx) as per existing incl wire mesh as per sample or suitable/compatible to existing dish washing machine complete all as directed. |
| 49 | S & F in replacementCC fabric cloths curtain, cut and make to suitable size 20” x 16”(Approx), suitable/compatible to existing dish washing machine etc complete all as directed. |
| 50 | S & F in replacementPVC knobs/buttons switch of capacity 63 Amps suitable/compatible to existing equipments/machineries etc. |
| 51 | S & F in replacementPVC knobs/buttons switch of capacity 40 Amps suitable/compatible to existing equipments/ machineries etc. |
| 52 | S & F in replacementPVC Push Buttons RED/Yellow/Green ofcapacity 40 Amps, suitable/compatible to existing kitchen equipments/ machineries etc complete all as directed. |
| 53 | S & F in replacement meat mincer unit 64 size, suitable/compatible to existing Meat Mincer Machine complete all as directed. |
| 54 | M & L for dismantling motor of capacity 1 HP, 3 phase, 415 V, AC supply 50 HZ from the existing position and taking down burn out copper winding wire, including cleaning the slots etc and re-winding the motor with supper enamelled copper wire with existing gauge & insulating with high quality insulation lamination and varnishing, heating and making necessary connection, testing & commissioning to the entire satisfaction of Engineer-in-charge complete as directed. Note For item Ser No. 54 to 59 :- Cost of transportation from work place to Civil workshop and vice-versa is deemed to be included in this Job. |
| 55 | Ditto all as per item No. 54 above but Capacity 2 HP, 3 Phase, 415 V, AC supply 50 HZ |
| 56 | Ditto all as per item No. 54 above butCapacity 3 HP, 3 Phase , 415 V, AC Supply 50 HZ |
| 57 | Ditto all as per item No. 54 above butCapacity 4.5/5 HP, 3 Phase , 415 V, AC Supply 50 HZ |
| 58 | Ditto all as per item No. 54above but Capacity 1 HP, Single Phase, 230 V, AC supply 50 HZ |
| 59 | Ditto all as per item No. 54above but Capacity 0.5 HP, Single Phase, 230 V, AC supply 50 HZ |
| 60 | S & F in replacement fine grade abrasive lining on stainless steel/ aluminium circular rotating disc of size 12” dia(Approx), suitable/compatible to existing Potato peelar machine complete all as directed |
| 61 | S & F in replacement bevel gear set comprising of G.15 teeth small gear of size 75mm (OD), 35mm (ID) and G-45 teeth big gear of size 190 mm (OD), 110mm (ID) with locking slot and key to fix on shaft, suitable/compatible to existing egg beater machine complete allas directed |
| 62 | S & F in replacementcrown bevel gear set having 10 to 20 teeth with locking slot and key, suitable/compatible to existing dough kneading machine complete all as directed |
| 63 | S & F in replacement shaft made up of Stainless Steel, suitable /compatible to existing potato peeler machine of 10-15 Kg per batch capacity complete all as directed. |
| 64 | S & F in replacement new guide plate made out of SS 15G of size 50x25mm thick or 38 Nos hole and sliding holes, suitable/ compatible to existing bread slicing machine including testing etc complete all as directed. |
| 65 | S & F in replacement spindle shaft with key slot of dia 35mmx 45cm long with key made out from gun metal, suitable/compatible to existing dough/planatory mixer including testing etc complete all as directed |
| 66 | S & F in replacement inner container made out of SS 304 grade, 2mm thick sheet of size 450mm inner dia and Depth 370mm including covered with rockwool asbestos circular sheet of suitable size at bottom and 1/2” BSP socket fully welded including 3/4" food drain valve unit with shut/open handle, S/S elbow suitable/ compatible to existing vessels including cutting & welding of lid handle, fixing with existing tea boiler & testing etc complete all as directed. |
| 67 | S & F in replacement toaster tray of size 800x400x25mm made out of angle iron 25x25x10mm,GI spot welded mesh, outer plate 16 gauge made out of stainless steel including 2 Nos 4” long bakelite handle, suitable/compatible to existing Bread Toaster Machine including testing etc complete all as directed. |
| 68 | S & F in replacementdirect on line starter in sheet metal enclosure type MK-1, 415 V, 50 Hz, 3 phasefor air curtain and relay max range 11-18 A complete including incoming and outgoing connections as per site requirement or suitable/ compatible to existing air curtain complete all as specified and directed |
| 69 | S & F in replacment including testing & commissioning ofcable XLPE Insulated, screened, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of 3.5 Core 25 Sqmm including fixing on walls or on tray etc. including saddling, tie up with PVC sleeves etc. |
| 70 | Ditto all as per item No 69 above but 3.5 Core 95 Sqmm. |
| 71 | Ditto all as per item No 69 above but 3.5 Core 150 Sqmm. |
| 72 | M&L for Straight through heat shrinkable type jointing kit suitable for 3.5 Core 70-120 Sqmm size XLPE LT UG Cable including disconnecting the cable from both side of LT panel/ACB and re-connecting the same cable according to existing system after completion of jointing work complete all as directed. |
| 73 | M&L for Straight through heat shrinkable type jointing kit suitable for 3.5 Core 25-50 Sqmm size XLPE LT UG Cable including disconnecting the cable from both side of LT panel/ACB and re-connecting the same cable according to existing system after completion of jointing work complete all as directed. |
| 74 | M & L for PVC coating for existing racks of saucers of dish washing machine complete all as specified and as directed. Note :- Cost of transportation from work place to Civil workshop and vice-versa is deemed to be included in this Job. |
| 75 | S & F in replacement SS enclosure Factory made with and including of 250 Amps, 4P, 415 Volts, 25 KA MCCB, IK08 and IP 30 Protection with wall mounting accessories in any type of wall including taking down old one complete all as specified and directed. |
| 76 | S & F in replacement MCCB 4P, 415 Volts, 40A, 25 KA breaking capacity with adjustable short circuit protection with Ics=100% of Icu complete all as directed. |
| 77 | S & F in replacementMCCB 4P, 415 Volts, 63A, 25 KA breaking capacity with adjustable short circuit protection with Ics=100% of Icu complete all as directed. |
| 78 | S & F in replacement MCCB 4P, 415 Volts, 100A, 25 KA breaking capacity with adjustable short circuit protection with Ics=100% of Icu complete all as directed. |
| 79 | S & F in replacementof 4 Way TPN DB-VTPN 160 Amp MCCB DB"s, as per IEC 61439-3, suitable for flush mounting and surface mounting with 250 amp copper busbar for each phase, 2 neutrals bar, 2 earth busbar and cable ties for cable management, fully insulated busbar & shrouded neutral bars, improved Pan assembly for ease of installation, IP-30 with for 160 Amp MCCB as incomer and SP/TP MCB"s as outgoing fixing arrangement complete all as specified and directed. |
| 80 | S & F in replacementSheet Metal Enclosure with Industrial socket with plug top, Tripple Pole and Earth enclosure, 5-Pin of capacity 63 Amp with 3 Pole MCB of 415 Volts, 63 Amps complete all as directed. |
| 81 | S & F in replacement Industrial socket with plug top, 5-Pin of capacity 63 Amp complete all as directed. |
| 82 | M&L for complete ovehauling of Rotary Oven of Capacity to brake 420 Loves/batch, Size (2900x2150x2400)mm, 3-ph, 6.5 KW, diesel fired, fuel injector, Motor with blower and cleaning the all components/parts applying petrolium jelly/grease/lube oil etc to all moveable parts wherever required including Cutting & welding, testing and commissioning including operating demo shall be given through professional and competent firm / technician / service engineer in this field in presence and entire satisfaction of the Engr-in-Charge. |
| 83 | S & F in replacement 3-Ph, 415 V, 50 Hz, 3 HP Motor, rpm 1480, IP 55, Suitable/compatible to existing Rotary Oven complete all as directed Make : ABB as OEM or its equivalent. |
| 84 | S & F in replacement of 3-Ph, 415 V, 50 Hz, 150 W, 1.3 A,Motor, rpm 3400, IP 55, Suitable/compatible to existing Rotary Oven complete all as directed. Make : ABB as OEM or its equivalent. |
| 85 | S & F in replacement of blower with shaft of suiatble size as per OEM or Suitable/compatible to existing Rotary Oven complete all as directed. Make : as per sample. |
| 86 | S & F in replacement Diesel Fuel injector pump assembly as per OEM or Suitable/compatible to existing Rotary Oven complete all as directed Make : as per sample. |
| 87 | S & F in replacement Diesel Fuel filter as per OEM or Suitable/compatible to existing Rotary Oven complete all as directed. Make : as per sample |
| 88 | S & F in replacement Capacitor box, rating 8KV-16mA, tS 10/1 as per OEM or Suitable/compatible to existing Rotary Oven complete all as directed. Make : as per sample |
| 89 | S & F in replacement of MCCB 3P, 415 Volts, 63A, 16 KA breaking capacity with adjustable short circuit protection with Ics=100% of Icu complete all as directed. |
| 90 | S & F in replacement MCCB 4P, 415 Volts, 250A, 25 KA breaking capacity with adjustable short circuit protection with Ics=100% of Icu with Rotary Handle Operating Mechanism (RHOM) complete all as directed. |
| 91 | S & F in replacement 200 W, 230 Volts, AC supply Incandacent bulb, suitable/ compatible to existing Rotary Oven complete all as directed. |
| 92 | S & F in replacement of PVC racks of suitable size/shapes made out of PVC /UPVC as per sample or suitable/compatible to existing dish washing machine all as directed.OEM of Machine : Washmatic |
| 93 | S & F in replacement racks of suitable size/shapes made out of SS 304 grade steel sheet as per sample or suitable/compatible to existing Combi Oven machine all as directed. OEM of Combi Oven : Rational |
| 94 | M&L for complete overhauling and taking down unserviceable parts of Dish Washer Machine, Hood Type Size (635x750x1500)mm and make it serviceable by replacing all defective/worn out parts of it including motor, gear assembly, electronic control card (PCB), control wiring, power cord, Calibration of control board, cleaning, testing and commissioning including operating demo shall be given through professional and competent firm / technician / service engineer in this field in presence and entire satisfaction of the Engr-in-Charge. OEM of Machine : SensuiNote : cost of any spares included in the Job. |
| 95 | M&L for complete overhauling of Dish Washer Conveyer Type, IFB 2000 Plates/hrs, 3-ph, 26 KW through professional and competent firm / technician / service engineer in this field in presence and made it serviceable with rebooting of its complete software /programme with entire satisfaction of the Engr-in-Charge.Make : WashmaticNote :spares will be measured and paid separately. |
| 96 | S & F in replacement of Electronic sensor unit (PCB) as per OEM or suitable/compatible to existing Dish washer machine Conveyer type complete all as directed. Make of Machine : Washmatic |
| 97 | S & F in replacement of Conveyer Chain as per OEM or suitable/compatible to existing Dish washer machine Conveyer type complete all as directed. Make of Machine : Washmatic |
| 98 | S & F in replacement of Gear box assembly, suitable/compatible to existing Waste Pulper Machine complete all as directed. |
| 99 | S & F in replacement of shaft made up of SS heavy grade suitable/compatible to existing Waste Pulper Machine complete all as directed. |
| 100 | M&L for complete Overhauling of Muffins Dropping Machine size (500/800) mm hopper capacity 10 Ltrs, Motors 180 Watts, 2000 Muffuns/hr through professional and competent firm / technician / service engineer in this field in presence and made it serviceable with entire satisfaction of the Engr-in-Charge.Make of Machine : Dazzle. |
| 101 | S & F in replacement of Electronic sensor unit (PCB) as per OEM or suitable/compatible to existing muffins Dropping Machine complete all as directed.Make of Machine : Dazzle |
| 102 | S & F in replacement of Gear box assembly, suitable/compatible to existing Muffins Dropping Machine complete all as directed. |
| 103 | S & F in replacement of motor 180 Watts, 1-phase, 230 Volts, suitable/compatible to existing Muffins Dropping machine complete all as directed. |
| 104 | M&L for complete overhauling of Imported Combi Oven, 10 racks of 3-ph, 8 KW through professional and competent firm / technician / service engineer in this field in presence and made it serviceable with entire satisfaction of the Engr-in-Charge.Make of Machine : Rational. |
| 105 | S & F in replacement of Electronic sensor unit (PCB) as per OEM or suitable/compatible to existing Imported Combi Oven machine complete all as directed. Make of Machine : Rational |
| 106 | Supply & installing/Re-booting/setting up of complete programme of Imported Combi Oven through competent technician complete all as directed. Make of Machine : Rational |
| 107 | S & F in replacement UPVC waster pipe of size 50 mm dia, length not less then 1.5 mtr, suitable/compatible to exting Imported Combi Oven complete all as directed. |
| 108 | S & F in replacement Electronic LCD display including its complete electrical wiring etc, suitable /compatible to existing Imported Combi Oven complete all as directed.Make of Machine : Rational |
| 109 | M&L for Complete Overhauling of Veggie Washer, Scrubber, Autolifter for Washig Vegetable etc made of 304 Feed grade SS, Capacity 45 - 50 Kg, Size (1700 x 800 x 1100)mm, operating on 440V/50 Hz/3-ph Power through professional and competent firm / technician / service engineer in this field in presence and made it serviceable with entire satisfaction of the Engr-in-Charge. Make of Machine : Jyoti Eqpts. Note : Replaced spares will be measured and paid separately. |
| 110 | S & F in replacement Gear box assembly, suitable/compatible to existing Veggie Washer, Autolifter Machine complete all as directed. |
| 111 | S & F in replacement of motor 2 HP, 3-phase, 440 Volts, suitable/ compatible to existing Veggie Washer Machine complete all as directed. |
| 112 | S & F in replacement hydraulic autolifter/ socker, suitable/ compatible to existing Veggie Washer Machine complete all as directed. |
| 113 | S & F in replacement gear box assembly, suitable/compatible to existing Dishwasher Machine Conveyer Type, electrically operated, including testing and commissioning etc complete all as directed.OEM of machine : Washmatic |
| 114 | S & F in replacement of display unit complete with control wiring and termostate etc, suitable/ compatible to existing buffet counter cum refrigerator. Make : Jyoti eqpts or its equivalent. |
| 115 | M&L for servicing of Air curtain by opening the air curtain and taking down complete including correcting defects like alignment of wheel /shaft, cleaning of blower, replacement of worn out bearing as per sample and make air curtain serviceable including greasing, cleaning andtesting etc to entire satisfaction of Engr-in-Charge including refixing to the exsting place. |
| 116 | S & F in replacement of compressor sealed unit of capacity 3 HP, 1/3 ph, 230 V, 50 Hz, AC including 1st fill of Refrigerant, suitable/ compatible to existing Four door refrigerator. Make : OEM or its equivalent. |
| 117 | S & F in replacement of compressor sealed unit of capacity 1.5 HP, 1-ph, 230 V, 50 Hz, AC including 1st fill of Refrigerant, suitable/ compatible to existing Work table under counter refrigerator 3-door. Make : OEM or its equivalent. |
| 118 | S & F in replacement of compressor sealed unit of capacity 1 HP, 1-ph, 230 V, 50 Hz, AC including 1st fill of Refrigerant, suitable/ compatible to existing Pickup counter refrigerator with food warmer.Make : OEM or its equivalent. |
| 119 | S & F in replacement compressor sealed unit of capacity 0.75 HP, 1-ph, 230 V, 50 Hz, AC including 1st fill of Refrigerant, suitable/ compatible to existing Buffet Counter cum refrigerator. Make : OEM or its equivalent. |
| 120 | S & F in replacement compressor sealed unit of capacity 0.75 HP, 1-ph, 230 V, 50 Hz, AC including 1st fill of Refrigerant, suitable/ compatible to existing refrigerated display counter. Make : OEM or its equivalent. |
| 121 | S & F in replacement of Electronic sensor unit (PCB) as per OEM or suitable/compatible to existing Dish washer machine Hood type complete all as directed. Make : OEM or its equivalent |
| 122 | Supply & Charging/filling refrigerant gas R410a/R12 into compressure or suitable /compatible toexisting compressors/ kitchen equipments etccomplete all as directed. |
| 123 | S & F in replacement MCB, 4P, 415 V, 63 Amp, 10 kA, C-Curve, suitable to fit existing sheet metal enclosure/Sub MDB complete all as directed. |
| 124 | S & F in replacement MCB, 3P, 415 V, 63 Amp, 10 kA, C-Curve, suitable to fit existing sheet metal enclosure/Sub MDB complete all as directed. |
| 125 | S & F in replacement MCB, DP, 230 V, 40 Amp, 10 kA, C-Curve, suitable to fit existing sheet metal enclosure/Sub MDB complete all as directed. |
| 126 | S & F in replacement of MCB, SP, 230 V, 20-40 Amp, 10 kA, C-Curve, suitable to fit existing sheet metal enclosure complete all as directed. |
| 127 | S & F in replacement of 20 mm dia PVC flexible/spiral conduit heavy duty complete all as directed. |
| 128 | S & F in replacement Stainer made out of SS/high potential steel as per existing size/make or suitable/compatible to existing Pulveriser machine Capacity 45 Kg/hr complete all as directed. |
| 129 | S & F in replacement of 40 mm dia PVC flexible/spiral heavy duty waste pipe (approx length 1.5 mtr), suitable/compatible to existing veggie washer / scrubber machine complete all as directed |
| 130 | S & F in replacement of Cylinderical stone roller heavy duty, suitable /compatible to existing masala grinder of Capacity15 Ltrs, Size (24"x24"x48") complete all as directed |
| 131 | S & F in replacement of blower shaft of suiatble size as per OEM or Suitable/ compatible to existing electric chimney complete all as directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
