Construction Of Mission Shakti Bhawan Block Level For Khallikote Block In The District Of Ganjam Building Work
Tender Value
35.15 Lakhs
Estimated cost
Bid Submission
30 Nov 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khallikote → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Mission Shakti Bhawan Block Level For Khallikote Block In The District Of Ganjam Building Work
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of Foundation in hard soil or gravelly soil with all leads & lifts including dressing and leveling the bed and depositing the excavated earth at places away from work site, including cost of all labour, T&P and dewatering if required for the work etc. complete as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 2 | Supplying, filling sandin foundation & plinthof Structure as per drawing & Technical Specification, with sand of approved quality from approved quarry in 23.5cm (9\") thick layers including watering and ramming with cost, conveyance royalties, taxes of all the materials and labour with T&P required for the work etc. complete as per section 2100 of MORT&H specification for Road and Bridge works ( latest revision) as per drawing and Technical specification and as directed by the Engineer-in-Charge (Measurement shall be taken on finished compacted section only). |
| 3 | Cement Concrete of proportion (1:3:6) in foundation bed using 40mm size hard black crusher broken granite stonemetal of approved quality from approved quarry, free from skin, including hosting, lowering and laying compacting concrete in layers in required thickness to required level ramming watering curing etc. including cost, conveyance,royalty and taxes of all materials with alllabour with T&P required for the work etc. complete including dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 4 | Cement Concrete of proportion (1:2:4) using12 mm size hard black Crusher broken granite stone chips of approved quality from approved quarry, free from skin, including hosting, lowering and laying compacting concrete in layers not exceeding 15 cm (6\") thick to required level ramming watering curing etc. including cost, conveyance,royalty and taxes of all materials with alllabour with T&P required for the work etc. complete including centering and shuttering, dewatering if required as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 5 | Fly ashbrick masonry in cement mortar (1:6) in Foundation and plinth using bricks of “23cmx11cmx8cm\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&Prequired for the worketc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge. |
| 6 | RCC work of M-20 grade in the following Structural building works using 20mm to 10mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including mixing hoisting lowering laying compacting concrete using concrete mixer, vibrator watering and curing for four weeks centering and shuttering and finishing the exposed surfaces smooth as per relevant clauses of section 1700 of MORT&H specification for Road & Bridge works (4th Revision) including hire and running charges of all machineries including cost, conveyance, royalty and taxes of all materials and labour with T&P required for the work etc. complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Excluding cost of reinforcement & binding wires to be used in the work) - Column base footing |
| 7 | Plinth Beam/ Column |
| 8 | Column (Ground Floor) |
| 9 | Column (First Floor) |
| 10 | Lintel (Ground Floor) |
| 11 | Lintel (First Floor) |
| 12 | Chajja |
| 13 | Beam (Ground floor) |
| 14 | Beam (First floor) |
| 15 | Stair Case |
| 16 | Roof Slab (Ground Floor) |
| 17 | Roof Slab (First Floor) |
| 18 | Fin (37.5) for window |
| 19 | Straightening cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. Rods or tor steel of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL / SHYAM STEEL (Grade Fe-500D) confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding tying the grills, hoisting, lowering and placing in proper position required for RCC works including cost, conveyance of M.S. Rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour with all T&P required for the work etc. complete as directed by the Engineer-in-charge - Ground Floor |
| 20 | First Floor |
| 21 | Fly ashbrick masonry in cement mortar (1:6) in super structure using bricks of “23cmx11cmx8cm\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&Prequired for the worketc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge. - Ground Floor |
| 22 | First Floor |
| 23 | 20 mmthick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 24 | 16 mmthick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge - Ground Floor |
| 25 | First Floor |
| 26 | 12 mm (1/2\") thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge - Ground Floor |
| 27 | First Floor |
| 28 | 6mm thick cement plaster (1:4) over RCC works including deep chipping, finished smooth with proper thickness, watering, curing for required days with cost, conveyance, royality, taxes of all materials and labour with T&P required or the work etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-charge - Ground Floor |
| 29 | First Floor |
| 30 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Casement Door – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistantaccessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials andproduct conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards.--(D and D4) etc complete as per direction of Engineer-in-Charge. (including Door Frame) |
| 31 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) ( FENESTA / NCL VEKA LTD.)three track three pannel sliding window -60 series duly manufactured using UPVC reinforced profiles of 108mm x 45mm x 2.5mm for outer frame and window sash of 39mm x58mm x 2.5m capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistantaccessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges,materials andproduct conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards. ------(W)etc complete as per direction of Engineer-in-Charge.(including Window Frame) |
| 32 | Supplying and fitting-fixing of fixed Glass for ventilator etc complete as per direction of Engineer-in-Charge. |
| 33 | Supplying, fitting, fixing of all types of MS Grills / Gates / Doormade of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge - Ground Floor |
| 34 | First Floor |
| 35 | Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge - Ground Floor |
| 36 | First Floor |
| 37 | Plastic Emulsion Paint Two coatsto wallsover a coat of primer ofapproved shade on prepared surface of new works to give a even shade with cost conveyance royalties and taxes of all the materials and all labour with T&P required for the work etc.complete in all respectas per drawing and Technical Specification and as directed by the Engineer-in- Charge - Ground Floor |
| 38 | First Floor |
| 39 | Painting Two coat with Weather coatover a coat of primer of approved shed of approvedcolourover prepared surfaces including scuffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge - Ground Floor |
| 40 | First Floor |
| 41 | Painting two coatof any approved S/E paint overiron over a coat of primer of approved shed of approvedcolourover prepared surfaces including scuffolding to outside walls, including cost and conveyance royalty and taxes of all materials and labour with T&P required for the worketc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge - Ground Floor |
| 42 | First Floor |
| 43 | Supplying, fitting & fixing of Supplying, fitting and fixing Vertified Tile 600mm x 600mm plain (Ivory) of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 44 | Supplying,fitting and fixing of 30 cm x 30 cm / 40 cm x 40 cm special plain / printed series ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to Is13755of approved make in dados on 12mm thickcement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing etc. required for the work all complete as per direction of the Engineer-in-charge |
| 45 | Supplying, fitting & fixing of Supplying, fitting and fixing Chequred Tile of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 46 | Providing fitting and fixing Granite tile above 0.40sqm (20mm thick)for base plate ofkitchen on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of tiles including fixing tiles to proper slope / level mending to sizes including cost, conveyance, taxes and royality of all materials with all labour and T&P required for the work etc. complete in all floors as per standard specification and direction of Engineer-in-charge. |
| 47 | Supplying fitting and fixing of Stainless Steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx 2mm @ 0.90mtr C/C and Stainless square pipe bracing of size 32mmx 32mmx 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing,etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. |
| 48 | providing and laying of 60mm thick cement concrete interlocking paver block of M-30 grade and of approved make, variety , cour and size mabe by block making machine with strong vibratory compaction of approved design and shape laid in requied colour and pattern over 50mm thick compaction bed of coarses filling the joint with fine sand etc all complete including cost, conveyance, royalty, taxes of all materials all labour, T&P etc. complete in all repsect as per direction of the Engineer-In charge |
| 49 | Providing fitting fixing of rain water spoutincluding cost of all materials and labour T&P etc complete. |
AI Tender Summary
Tender Timeline
Nov 20, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 01, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender