Workshop Miscellaneous Items - 1 A ) Scope Of Work: ( 1 ) Workshop Miscellaneous Items - 1 Set ( 2 ) The Vendor Shall Supply The Following Items As Per The Specifications Listed Below . 2 B ) List Of Deliverable ( 3 ) Workshop Miscellaneous Items - 1 Set ( 4 ) 1 Set Consists Of :- ( 5 ) Tri Chlo Ethylene ( 2.5 Ltr Bottle ) - 2 Nos ( 6 ) Acetone Lab Grade ( 2.5 Ltr Bottle ) - 2 Nos ( 7 ) Persian Blue Tube - 5 Nos ( 8 ) Dunlop Solution - 2 Nos ( 9 ) Metal Cutting Machine Wheels - 2 Nos 3 ( 10 ) Measuring Tape 5 Meter - 2 Nos ( 11 ) Measuring Tape 10 Meter - 2 Nos ( 12 ) Packing Tapes 2 Inch - 5 Nos ( 13 ) Packing Tapes 3 Inch - 5 Nos ( 14 ) Hi-Performance Carbide Csk Bits M3 - 3 Nos ( 15 ) Hi-Performance Carbide Csk Bits M4 - 2Nos ( 16 ) Hi-Performance Carbide Csk Bits M5 - 3 Nos 4 ( 17 ) Hi-Performance Carbide Csk Bits M6 - 2 Nos ( 18 ) Helicoil Hand Tap Set M2.5X0.45 - 5 Nos ( 19 ) Helicoil Hand Tap Set M3x0.5 - 3 Nos ( 20 ) Helicoil Hand Tap Set M4x0.7 - 3 Nos ( 21 ) Helicoil Hand Tap Set M5x0.8 - 3 Nos ( 22 ) Helicoil Hand Tap Set M6x1.0 - 3 Nos 5 ( 23 ) Solid Carbide Hand Tap Set M2x0.4 - 3 Nos ( 24 ) Solid Carbide Hand Tap Set M2.5X0.45 - 2 Nos ( 25 ) Solid Carbide Hand Tap Set M3x0.5 - 3 Nos ( 26 ) Solid Carbide Hand Tap Set M4x0.7 - 5 Nos ( 27 ) Solid Carbide Hand Tap Set M5x0.8 - 3 Nos ( 28 ) Solid Carbide Hand Tap Set M6x1.0 - 3 Nos ( 29 ) Turpentine Oil - 5 Ltr 6 ( 30 ) Conformal Coating - 1 Ltr ( 31 ) Hand Knife - 2 Nos ( 32 ) O Ring Kit - 2 Nos ( 33 ) Scissors-Cloth - 2 Nos ( 34 ) Torch Light - 2 Nos ( 35 ) Multi-Purpose Tools Bag - 2 Nos ( 36 ) Industrial Tools Bag - 2 Nos ( 37 ) Red Oxide Paint - 5 Ltr ( 38 ) Cotton Waste - 25 Kgs ( 39 ) Flat Double Cut Smooth 8¿ Inch - 2 Nos 7 ( 40 ) Half Round Double Cut Smooth 8¿ Inch - 2 Nos ( 41 ) Flat Single Cut Smooth 8¿ Inch - 2 Nos ( 42 ) Half Round Single Cut Smooth 8¿ Inch - 2 Nos ( 43 ) Hi-Performance Drills For Special Alloys Dia 2.5 - 3 Nos ( 44 ) Hi-Performance Drills For Special Alloys Dia 3.0 - 5 Nos ( 45 ) Hi-Performance Drills For Special Alloys Dia 3.2 - 3 Nos 8 ( 46 ) Hi-Performance Drills For Special Alloys Dia 3.3 - 5 Nos ( 47 ) Hi-Performance Drills For Special Alloys Dia 3.5 - 5 Nos ( 48 ) Hi-Performance Drills For Special Alloys Dia 4.0 - 5 Nos ( 49 ) Hi-Performance Drills For Special Alloys Dia 4.2 - 3 Nos ( 50 ) Hi-Performance Drills For Special Alloys Dia 4.5 - 5 Nos ( 51 ) Hi-Performance Drills For Special Alloys Dia 5.0 - 5 Nos 9 ( 52 ) Hi-Performance Drills For Special Alloys Dia 5.2 - 3 Nos ( 53 ) Hi-Performance Drills For Special Alloys Dia 5.5 - 5 Nos ( 54 ) Hi-Performance Drills For Special Alloys Dia 6.0 - 5 Nos ( 55 ) Hi-Performance Drills For Special Alloys Dia 6.2 - 3 Nos ( 56 ) Hi-Performance Drills For Special Alloys Dia 6.5 - 5 Nos ( 57 ) Hi-Performance Drills For Special Alloys Dia 6.8 - 3 Nos 10 ( 58 ) Hi-Performance Drills For Special Alloys Dia 7.0 - 3 Nos ( 59 ) Hi-Performance Drills For Special Alloys Dia 7.2 - 5 Nos ( 60 ) Hi-Performance Drills For Special Alloys Dia 7.5 - 5 Nos ( 61 ) Hi-Performance Drills For Special Alloys Dia 8.0 - 3 Nos ( 62 ) Hi-Performance Carbide Reamers Dia 3 - 5 Nos ( 63 ) Hi-Performance Carbide Reamers Dia 4 - 2 Nos 11 ( 64 ) Hi-Performance Carbide Reamers Dia 5 - 5 Nos ( 65 ) Hi-Performance Carbide Reamers Dia 6 - 3 Nos ( 66 ) Solid Carbide Machine Tap M3x0.5 - 5 Nos ( 67 ) Solid Carbide Machine Tap M4x0.7 - 3 Nos ( 68 ) Solid Carbide Machine Tap M5x0.8 - 5 Nos ( 69 ) Solid Carbide Machine Tap M6x1.0 - 3 Nos ( 70 ) Tungsten Carbide Arch Pointed Nose Rotary Cutter For Metal 3Mm - 2 Nos 12 ( 71 ) Tungsten Carbide Cylindrical Nose Rotary Cutter For Aluminium 6Mm - 3 Nos ( 72 ) Tungsten Carbide Arch Pointed Nose Rotary Cutter For Metal 8Mm - 2 Nos ( 73 ) Tungsten Carbide Arch Pointed Nose Rotary Cutter For Metal 10Mm - 5 Nos ( 74 ) Tungsten Carbide Conical Round Nose Rotary Cutter For Aluminium 12 Mm - 5 Nos ( 75 ) Tungsten Carbide Arch Pointed Nose Rotary Cutter For Metal 16Mm - 2 Nos 13 ( 77 ) Solid Carbide 90° Countersink Cutter 3 Flutes M4 - 3 Nos ( 78 ) Solid Carbide 90° Countersink Cutter 3 Flutes M5 - 5 Nos ( 79 ) Solid Carbide 90° Countersink Cutter 3 Flutes M6 - 5 Nos ( 80 ) Solid Carbide 90° Countersink Cutter 3 Flutes M8 - 5 Nos ( 81 ) Solid Carbide 110° Countersink Cutter 3 Flutes M3 - 4 Nos ( 82 ) Solid Carbide 110° Countersink Cutter 3 Flutes M4 - 3 Nos 14 ( 83 ) Solid Carbide 110° Countersink Cutter 3 Flutes M5 - 5 Nos ( 84 ) Solid Carbide 110° Countersink Cutter 3 Flutes M6 - 3 Nos ( 85 ) Solid Carbide 110° Countersink Cutter 3 Flutes M8 - 5 Nos ( 86 ) Hss Parallel Shrank Drills Dia 2.0 - 5 Nos ( 87 ) Hss Parallel Shrank Drills Dia 2.5 - 2 Nos ( 88 ) Hss Parallel Shrank Drills Dia 3.0 - 5 Nos ( 89 ) Hss Parallel Shrank Drills Dia 3.1 - 2 Nos 15 ( 90 ) Hss Parallel Shrank Drills Dia 3.2 - 5 Nos ( 91 ) Hss Parallel Shrank Drills Dia 3.3 - 5 Nos ( 92 ) Hss Parallel Shrank Drills Dia 3.5 - 5 Nos ( 93 ) Hss Parallel Shrank Drills Dia 4.0 - 5 Nos ( 94 ) Hss Parallel Shrank Drills Dia 4.1 - 10 Nos ( 95 ) Hss Parallel Shrank Drills Dia 4.2 - 5 Nos ( 96 ) Hss Parallel Shrank Drills Dia 4.3 - 2 Nos ( 97 ) Hss Parallel Shrank Drills Dia 4.5 - 3 Nos 16 ( 98 ) Hss Parallel Shrank Drills Dia 5.0 - 5 Nos ( 99 ) Hss Parallel Shrank Drills Dia 5.1 - 2 Nos ( 100 ) Hss Parallel Shrank Drills Dia 5.2 - 5 Nos ( 101 ) Hss Parallel Shrank Drills Dia 5.3 - 5 Nos ( 102 ) Hss Parallel Shrank Drills Dia 5.5 - 2 Nos ( 103 ) Hss Parallel Shrank Drills Dia 6.0 - 5 Nos ( 104 ) Hss Parallel Shrank Drills Dia 6.1 - 2 Nos 17 ( 105 ) Hss Parallel Shrank Drills Dia 6.2 - 5 Nos ( 106 ) Hss Parallel Shrank Drills Dia 6.3 - 5 Nos ( 107 ) Hss Parallel Shrank Drills Dia 6.5 - 2 Nos ( 108 ) Hss Parallel Shrank Drills Dia 6.8 - 5 Nos ( 109 ) Hss Parallel Shrank Drills Dia 7.0 - 5 Nos ( 110 ) Hss Parallel Shrank Drills Dia 7.1 - 5 Nos ( 111 ) Hss Parallel Shrank Drills Dia 7.2 - 2 Nos 18 ( 112 ) Hss Parallel Shrank Drills Dia 7.3 - 2 Nos ( 113 ) Hss Parallel Shrank Drills Dia 7.5 - 5 Nos ( 114 ) Hss Parallel S Tri Chlo Ethylene ( 116 ) Tri Chlo Ethylene ( 2.5 Ltr Bottle ) ( 117 ) Releative Density At 27 / 27°C : 1.452 To 1.458 ( 118 ) Residue On Evaporation Mg / 100 Ml Max : 15 ( 119 ) Distillation Yield Between 86 And 88 C At 760 Mm Hg Percent By Volume, Min : 95 ( 120 ) Alkalinity ( As Na2 Co3 ) By Weight Max% : 0.005To 0.02 ( 121 ) Water, Cpm : 150 Max ( 122 ) Qty : 2 No 20 Acetone Lab Grade ( 123 ) Purity W% : 99.5 Min ( 124 ) Water Content W% : 0.5 Max ( 125 ) Acidity, As Acetic Acid W% : 0.002 Max ( 126 ) Non-Volatile Matter Ppm : 20 Max ( 127 ) Permanganate Time Minutes : 120 ( 128 ) Qty : 2 Numbers 21 Persian Blue Tube ( 129 ) Coat Parts With A Uniform Film Of Prussian Blue ( 130 ) Assemble In Working Position, Turn Shaft ( 131 ) Improper Fitting Will Show Up As A Definite, Easy-To-See, Bright Blue Streak ( 132 ) Correct The Seating Of The Assembly ( 133 ) Wipe Clean ( 134 ) Qty : 5 Numbers 22 Dunlop Solution ( 135 ) Dunlop Adhesive Solutions That Are Used In Almost All Industries For Their High Effectiveness And Are Safe In Terms Of Health And Environment. ( 136 ) Adhesives Are Formulated Using Superior International Quality Chemicals Under Strict Quality Control Measures To Fulfill Varied Clients Requirements. ( 137 ) Strong Bonds Between Materials Such As Wood, Cork, Concrete, Rubbe 23 ( 138 ) Qty: 2 Numbers Metal Cutting Machine Wheels ( 139 ) Metal Cutting Machine Wheels ( 140 ) Qty : 2 Numbers Measuring Tape 5 Meter ( 141 ) Measuring Tape 5 Meter ( 142 ) Qty : 08 Numbers Measuring Tape 10 Meter ( 143 ) Measuring Tape 10 Meter ( 144 ) Qty : 06 Numbers Packing Tapes 2 Inch ( 145 ) Packing Tapes 2 Inch ( 146 ) Qty : 05 Numbers Packing Tapes 3 Inch ( 147 ) Packing Tapes 3 Inch ( 148 ) Qty : 05 Numbers Hi-Performance Carbide Csk Bits ( 149 ) Hi- Performance Carbide Csk Bits M3, Qty: 03 Numbers ( 150 ) Hi-Performance Carbide Csk Bits M4, Qty: 02 Numbers ( 151 ) Hi-Performance Carbide Csk Bits M5, Qty: 03 Numbers 25 ( 152 ) Hi-Performance Carbide Csk Bits M6, Qty: 02 Numbers Helicoil Hand Tap Set ( 153 ) Helicoil Threading Taps / Screw Thread Inserts ( Sti ) Taps Short D Be Of Hsse Material. ( 154 ) Sti Taps Should Be Useful To Make Proper Threads For The Thread Inserts ( 155 ) Chemical Composition Of The Sti Taps Material Shall Be As Follows ( In 0 / O Weight ) ( 156 ) C -0.92 Max ( 157 ) Cr-4.3 Max 26 ( 158 ) Mo-5 Max ( 159 ) W - 6.4 Max ( 160 ) V-I.8 Max ( 161 ) Co- 5 Max ( 162 ) Si - 0.35 Max ( 163 ) Pitch Diameter Limits Should Be As Per Std Ma 1567. Pitch Dia Tolerance Shoal D Be 4H5h. ( 164 ) Style: Plug Type Style ( 4 Threads Chamfer ) . ( 165 ) Reports To Be Submitted: ( A ) Material Composition Test Certificates, ( B ) Tensile Test Certificate 27 ( C ) Certificate Of Conformance From Manufacturer Side Should Be Submitted At The Time Of Delivery. ( 166 ) Helicoil Hand Tap Set M2.5X0.45, Qty: 05 Numbers ( 167 ) Helicoil Hand Tap Set M3x0.5, Qty: 03 Numbers ( 168 ) Helicoil Hand Tap Set M4x0.7, Qty: 03 Numbers ( 169 ) Helicoil Hand Tap Set M5x0.8, Qty: 03 Numbers ( 170 ) Helicoil Hand Tap Set M6x1.0, Qty: 03 Numbers 28 ( 171 ) All The Vendors Should Enclose Oems Authorization Certificate Along With Offer. If Oem Authorization Certificate Is Not Enclosed, Offer Will Not Be Considered. ( 172 ) List Of Deliverables Are Different Variety Of Assembly Tools, Which Are To Be Used For Specific Integration Activities. Vendor Has To Quote For All Items Meeting Specification, Failing That Offer Will Not Be Considered. 29 Solid Carbide Hand Taps ( 174 ) The Tap Is Classed As Taper, Second Or Bottoming According To The Length Of Chamfer ( 175 ) Which Approximate To The Following : ( 176 ) 1. Taper Tap##....#4° Per Side ( 10 To 12 Threads ) ( 177 ) 2. Second Tap#.....#8° Per Side ( 6 To 8 Threads ) ( 178 ) 3. Bottoming Tap#...22° Per Side ( 1.1 / 2 To 2.1 / 2 Threads ) ( 179 ) Hardness Shall Be Of 65Hrc 30 ( 180 ) The Tolerance Of The Hole Made Using The Items Will Be Min H7 ( 181 ) Taps Shall Be Coated Carbide. Pvd ¿ Twolayer Coating With Heat-Resistant Tialn Base Layer And Low-Friction Mos2 Top Layer Over Carbide Substrate. ( 182 ) All The Tools Will Be Conforming To Ansi C 5 31 ( 183 ) Test Certificates Pertaining To The Specifications ( Mainly Chemical Composition, Tolerance & Hardness ) Should Be Provided Along With The Items. ( 184 ) Solid Carbide Hand Tap Set M2x0.4, Qty: 03 Numbers ( 185 ) Solid Carbide Hand Tap Set M2.5X0.45, Qty: 02 Numbers ( 186 ) Solid Carbide Hand Tap Set M3x0.5, Qty: 03 Numbers ( 187 ) Solid Carbide Hand Tap Set M4x0.7, Qty: 05 Numbers 32 ( 188 ) Solid Carbide Hand Tap Set M5x0.8, Qty: 03 Numbers ( 189 ) Solid Carbide Hand Tap Set M6x1.0, Qty: 03 Numbers Turpentine Oil ( 190 ) Turpentine Oil ( 191 ) ( 191 ) Qty : 5 Ltr Conformal Coating ( 192 ) Conformal Coating ( 193 ) Qty : 1 Ltr Hand Knife ( 194 ) Hand Knife ( 195 ) Qty : 2 Numbers O Ring Kit ( 196 ) O Ring Kit ( 197 ) Qty : 2 Numbers 33 Scissors-Cloth ( 198 ) Scissors-Cloth ( 199 ) Qty : 2 Numbers Torch Light ( 200 ) Wattage: 5 Watts. ( 201 ) Led Torch With Long Range Beam ( 202 ) Lithium-Ion 3000Mah ( 203 ) Medium Range Flashlight Light ( 204 ) Low Beam: Led ( 205 ) Qty : 2 Numbers34 Multi-Purpose Tools Bag ( 206 ) Open Mouth Bag ( 207 ) Double Sides Open ( 208 ) 8 Outside Pockets And 15 Inside Pockets ( 209 ) Soft Grip Handle ( 210 ) Qty: 2 Numbers Industrial Tools Bag ( 211 ) High Grade Water Proof Nylon Material ( 212 ) Durable And Easy To Carry About ( 213 ) Unique Design, Convenience Of Use 35 ( 214 ) Nylon Tool Bag Is A Water Proof Bag Which Can Be Easily Carried Around.Can Be Contains All The Tools Like Hammer, Spanners, Wrenches Etc. ( 215 ) Qty: 2 Numbers Red Oxide Paint ( 216 ) Corrosion Resistant ( 217 ) Mainly Applied Is Ms Structure As A Primer & Rust Proof Paint. ( 218 ) Qty: 5 Liters 36 Cotton Waste ( 219 ) It Is A Multi-Purpose Sealant With 4 Main Applications ¿ Sealing, Joining, Fixing And Building. ( 220 ) It Is Adhesive That Helps Join Systems Or Mechanism Together By Preventing Leakage. ( 221 ) Anaerobic In Nature. ( 222 ) Qty : 25 Kg Flat Double Cut Smooth 8¿ Inch ( 223 ) Flat Double Cut Smooth 8¿ Inch ( 224 ) Qty: 2 Numbers 37 Half Round Double Cut Smooth 8¿ Inch ( 225 ) Half Round Double Cut Smooth 8¿ Inch ( 226 ) Qty: 2 Numbers Flat Single Cut Smooth 8¿ Inch ( 227 ) Flat Single Cut Smooth 8¿ Inch ( 228 ) Qty: 2 Numbers Half Round Single Cut Smooth 8¿ Inch ( 229 ) Half Round Single Cut Smooth 8¿ Inch ( 230 ) Qty: 2 Numbers 38 Hi-Performance Drills For Special Alloys ( 231 ) Specifications For Hi-Performance ( Carbide ) Drills For Special Alloys ( 232 ) The Special Drills Will Be Supplied Compatible With Titanium Class Of Material ( Such As Ti6al 4V ) ( 233 ) The Items Supplied Will Have Two Flutes Of 300 Helix And 1420 Point Angle ( 234 ) The Items Will Be Coated With Tiain 39 ( 235 ) The Tolerance Of The Hole Made Using The Items Will Be Min H7 ( 236 ) All The Tools Will Be Conforming To Ansi C 5 ( 237 ) All The Tools Will Be Made Up Of High Grade Micro Grain Solid Carbide With The Following Chemical Composition ( 238 ) Wc : 85 ¿ 95% ( 239 ) Co : 5- 10 % ( 240 ) C : 0.75% ( 241 ) Density Of 14.45G / Cubic.Cm 40 ( 242 ) Hardness Of 65Hrc ( 243 ) The Solid Carbide Tools Will Be Made By Sintering Process Only Hi-Performance Carbide Reamers ( 244 ) Specifications For Hi-Performance Carbide Reamers ( 245 ) Hi-Performance Carbide Reamers Shall Confirms To Bs 328 Part 4 / Din206b ( 246 ) The Tolerance Of The Hole Made Using The Items Will Be Min H7 ( 247 ) Hardness Shall Be Of 65Hrc 41 ( 248 ) The Carbide Reamers Shall Be Supplied Compatible With Titanium Class Of Material ( Such As Ti6al 4V ) ( 249 ) The Items Will Be Coated With Tiain ( 250 ) Solid Carbide Machine Taps Shall Be Coated Carbide Pvd With Two Layer Coating With Heat Resistant Tialn Base Layer And Low-Friction Mos2 Top Layer Over Carbide Substrate. ( 251 ) Hardness Shall Be Of 65Hrc ( 252 ) Shall Be Classof Fit 6Hx 42 ( 253 ) Dimension Standard Shall Be Din 371 ( 254 ) No Of Flutes Shall Be 4 For M3, M4, M5 & M6 ( 255 ) The Tolerance Of The Hole Made Using The Items Will Be Min H9 ( 256 ) Reports To Be Submitted: ( A ) Material Composition Test Certificates, ( B ) Tensile Test Certificate, ( C ) Certificate Of Conformance From Manufacturer Side Should Be Submitted At The Time Of Delivery. 43 ( 257 ) ( 257 ) Solid Carbide Machine Tap M3x0.5, Qty: 5 Numbers ( 258 ) ( 258 ) Solid Carbide Machine Tap M4x0.7, Qty: 3 Numbers ( 259 ) Solid Carbide Machine Tap M5x0.8, Qty: 5 Numbers ( 260 ) Solid Carbide Machine Tap M6x1.0, Qty: 3 Numbers 44 Tungsten Carbide Arch Pointed Nose Rotary Cutter For Metal ( 261 ) Useful In Confined Spaces Due To The Pointed Nose ( 262 ) Fine: For Hard And / Or Tough Materials Where A Smooth Surface Finish Is Required And Removal Demands Are Modest ( 263 ) Medium: For Machining Hard And / Or Tough Materials Under Normal Conditions 45 ( 264 ) Coarse: Particularly Suitable For Machining Stainless Steel, Soft Materials Or Light Alloys ( 265 ) X-Cut: For Hard And Soft Materials, Produces Short And Blunt Chips, Runs Smoothly Even At Low Cutting Speeds ( 266 ) Diamond Cut: For Heat-Treated And Tough Alloy Steels And Epoxy, Excellent Finish, Minimal Axial Forces 46 ( 267 ) A Smaller Diameter Burr Will Have A Finer Cut Than A Larger Diameter Burr Belonging To The Same Cut Category, For Example, Medium-Cut ( 268 ) Indispensable Tool, Used In Large Number Of Industrial Sectors Including Aviation, Shipping, Automotive And The Chemical Industry Etc. ( 269 ) Tungsten Carbide Arch Pointed Nose Rotary Cutter For Metal 3Mm, Qty : 02 Numbers 47 ( 270 ) Tungsten Carbide Arch Pointed Nose Rotary Cutter For Metal 8Mm, Qty : 02 Numbers ( 271 ) Tungsten Carbide Arch Pointed Nose Rotary Cutter For Metal 10 Mm, Qty : 02 Numbers ( 272 ) Tungsten Carbide Arch Pointed Nose Rotary Cutter For Metal 16 Mm, Qty : 02 Numbers 48 Tungsten Carbide Cylindrical Nose Rotary Cutter For Aluminium ( 273 ) Special Cutting Edge Suitable For Soft Materials ( 274 ) Use Wax To Avoid Chip Build-Up ( 275 ) Type Of Cut: Al = Al-Cut ( 276 ) Cylindrical Shape ( 277 ) End Cut: Cylindrical Burrs ( A ) And Inverted Cone Burrs ( N ) Can Be Supplied With End Cut 49 ( 278 ) Indispensable Tool, Used In Large Number Of Industrial Sectors Including Aviation, Shipping, Automotive And Chemical Industry, To Mention Just ( 279 ) Special Cutting Edge Suitable For Soft Materials ( 280 ) Tungsten Carbide Cylindrical Nose Rotary Cutter For Aluminium, Qty : 02 Numbers 50 Tungsten Carbide Conical Round Nose Rotary Cutter For Aluminium ( 281 ) Deburring Aluminium And Other Soft Materials ( 282 ) Used To Deburr Irregular Objects Or To Complete Finishing Work Inside A Confined Space ( 283 ) Indispensable Tool, Used In A Large Number Of Industrial Sectors Including Aviation, Shipping, Automotive And Chemical Industry ( 284 ) Use Wax To Avoid Chip Build-Up 51 ( 285 ) Special Cutting Edge Suitable For Soft Materials ( 286 ) Type Of Cut; Al = Al-Cut ( 287 ) Tungsten Carbide Conical Round Nose Rotary Cutter For Aluminium 12 Mm, Qty : 02 Numberso ( 288 ) Solid Carbide 90° Countersink Cutter 3 Flutes M3, Qty : 04 No ( 289 ) Solid Carbide 90° Countersink Cutter 3 Flutes M4, Qty : 03 No ( 290 ) Solid Carbide 90° Countersink Cutter 3 Flutes M5, Qty : 05 No 52 ( 291 ) Solid Carbide 90° Countersink Cutter 3 Flutes M6, Qty : 05 No ( 292 ) Solid Carbide 90° Countersink Cutter 3 Flutes M8, Qty : 05 No Solid Carbide 110° Countersink Cutter 3 Flutes ( 293 ) Solid Carbide 110° Countersink Cutter 3 Flutes M3, Qty : 04 No ( 294 ) Solid Carbide 110° Countersink Cutter 3 Flutes M4, Qty : 03 No 53 ( 295 ) Solid Carbide 110° Countersink Cutter 3 Flutes M5, Qty : 05 No ( 296 ) Solid Carbide 110° Countersink Cutter 3 Flutes M6, Qty : 03 No ( 297 ) Solid Carbide 110° Countersink Cutter 3 Flutes M8, Qty : 05 No Hss Parallel Shrank Drills ( 298 ) Specification For Hss Parallel Shrank Drills ( 299 ) Drills Are Made From M2 Grade Of Hss 54 ( 300 ) Items Supplied Will Have Milled Flutes Of Helix Angle 25-300 And Point Angle 1180 ( 301 ) The Items Will Be Coated With Tiain ( 302 ) The Items Will Be Standard Is 5103- 1969 / Din345 ( 303 ) Hardness Of 35Hrc ( 304 ) Vender Has To Supply Dill Bits As Per Specified Quantity. Vendor Should Supply The Catalogue With The Quotations. 55 ( 305 ) Vendor Should Strictly Follow The Technical Specifications, Standards Mentioned In The Specifications. Any Deviation Leads To Nonconsideration Of The Offer. ( 306 ) The Quotation Will Be Considered From Authorized Dealers Of The Particular Brand Which He Supposed To Supply. ( 307 ) Vendor Has To Submit The Following Reports: ( A ) Material Composition Test Certificates, 56 ( B ) Tensile Test Certificate, Cold Bending Certificate, ( C ) Surface Finish Certificate ( D ) ( 308 ) Hardness Inspection, ( E ) Certificate Of Conformance ( Coc ) From Manufacturer Side Should Be Submitted At The Time Of Delivery. The Vendors Have To Enclose Copy Of Oem Authorization Certificate Along With Thetheir Technical Offer, In The Absence Of Which Their Offer Will Be Rejected. 57 ( 309 ) Delivery Period: The Vendor Shall Deliver The Items Within 1 Month From The Placement Of Valid Supply Order In The Form Of Single Consignment At Rci At Their Own Cost. ( 310 ) The Vendors Shall Quote For All The Items And For Full Quantity. Part Quantity Quote Will Be Rejected. ( 311 ) All The Above Mentioned Items And Accessories Must Be Defect Free Due To Transportation, Weather Etc. 58 ( 311 ) All The Above Mentioned Items And Accessories Must Be Defect Free Due To Transportation, Weather Etc. And Must Be In Good Working Conditions At The Time Of Delivery. D ) Deliver Period ( 312 ) 1 Month From The Date Of Supply Order
