Construction Of Mission Shakti Bhawan Block Level In Naktideul Block Of Sambalpur District For The Year 2021-22 Buildings Works
Tender Value
42.66 Lakhs
Estimated cost
Bid Submission
23 Nov 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Naktideul → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Mission Shakti Bhawan Block Level In Naktideul Block Of Sambalpur District For The Year 2021-22 Buildings Works
BOQ
| Sl. No. | Item Description |
| 1 | GENERAL SPECIFICATIONS TO BE FOLLOWED1.Training Hall :- Dadoo-2\"-0\"x2\"-0\" size Ceramic Tile upto window sill (2\"-6\" Ht.) (KAJARIA/SOMANY/JOHNSON)Colour:-white/Off white/Matching Green2.KITCHEN:-Dadoo-1\"-0\"x1\"-6\" size ceramic tile upto 2\"-0\" Ht. from the kitchen slab.COLOUR:- White/Off white/Matching Granite Slab(KAJARIA/SOMANY/JOHNSON)3.STAIRCASE:-Dadoo-1\"-0\"x1\"-6\" size ceramic tile upto 4\"-0\" Ht.COLOUR:- White/Off white/Matching Granite Slab(KAJARIA/SOMANY/JOHNSON)4.VITRIFIED TILE (single charged plain) (KAJARIA/SOMANY/JOHNSON)size:-2\"-0\" x 2\"-0\", Colour-Ivory Pitch5.Granite:-(6\"x 12\") in kitchen slab, staircase and outer steps with moulded edge.6.Wall bearing plaster with punning & bitumen painting over C.C (1:2:4) with Tar paper laying below roofslab.7.4Nos of R.C.C. Column (12” x 10”) in the Training Hall.8.COLOURS:i)Inside walls Plastic emulsion paint using Shalimar/ Asian/ Bergerii)Outside wall: Weather coat painting with Shalimar/ Asian/ Berger9.Provision of Tar paper over plinth bend applying bitumen to check capillary rise of water.10.4” (100mm) R.C.C. band at sill level:i. Training Hall front &left wall (Full wall)ii.Officer’s Chamber front & right wall (Full wall)iii.Support Staff window (10” bearing on either side of the opening)iv. Kithcen Staff window (10” bearing on either side of the opening)11.ELECTRICAL:Electrical Appliances: (All of ISI Make ofreputed Brand) like (Modular switched/sockest):LEGRANDE/CONA/ANCHOR wire/ Cable: FINOLEX/ HAVELLS/V-GUARD Fixture Items: PHILIPS/ HAVELLS/ PANOSONIC Conduit Pipe: Flexible ISI mark Polythene PVC Conduit Pipe12.SANITARY FITTINGS: 1.All Ceramics: CERA/HINDWARE (Italian Collection)/JAQUAR (Aria Series) 2.C.P. Fittings: JAQUAR (Florentine) 3.Outer/ Inner pipe work: ORIPLAST/ SUPREME/ ASTRAL |
| 2 | Earth work in all kinds of soil within 50m initial lead & 1.5m initial lift including rough dressing of sides and leveling the bed including cost of all labour T & P etc. complete |
| 3 | Supplying and filling in foundation trenches and plinth with coarse river sand well watered and rammed in layers not exceeding 23 cm. in depth with all leads and lifts including cost, conveyance, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge. |
| 4 | Cement concrete of prop.(1:3:6) in foundation and floors using 4cm. size black hard (crusher broken) granite metal of approved quality from approved quarry including cost, conveyance, royalties and taxes of all materials andall labour,T&P etc complete. |
| 5 | Cement concrete of prop.(1:2:4) in foundation and floors using 20mm to 12mm size black hard (crusher broken) granite chips of approved quality from approved quarry including cost, conveyance, royalties and taxes of all materials andall labour,T&P etc complete. |
| 6 | 25mm thick Cement concrete (1:2:4) including punning and bitumen painting for bearing plaster using12 mm to 20mm size hard granite chips (per Cum) |
| 7 | Reinforced cement concrete of M-20 grade as per approved designs and drawings having a minimum compressive strength (in work test) of 200kg/cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite chips (20 mm. size chips not to exceeds 25 % ) and screened and washed sharp sand for mortar of approved quality from approved quarry to be mixed in concrete mixture including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debrises from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete but excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S.rods or Tor steel tying the grills and placing in proper position as directed by the Engineer in charge. |
| 8 | Footing |
| 9 | Column |
| 10 | Plinth bend |
| 11 | Lintel |
| 12 | 65 mm thick Chajja |
| 13 | Roof Beam |
| 14 | Ground Floor |
| 15 | First Floor |
| 16 | Staircase |
| 17 | Roof slab |
| 18 | Ground Floor |
| 19 | First Floor (Head Room) |
| 20 | Cutting, Straightening coiled or bent up M.S. rods or Tor steel (Fe-500) SAIL make welding or jointing if necessary, bending, binding, tying the grills and laying in position as required for R.C.C. works and hoisting, lowering and placing in position in all floors according to approved designs and drawings including cost, conveyance, taxes of M.S. rods or Tor steel and binding wires of 18 to 20 gauge required for the work and cost of all labour, sundries, T&P etc. complete in all respect as directed by the Engineer in charge (payment will be made according to the actual weight of M.S. rod / Tor steel consumed in the work and no separate payment will be made towards weight of binding wires which is to be borne by the contractor at his own cost) |
| 21 | Ground Floor |
| 22 | First Floor (Head Room) |
| 23 | 20 mm thick grading Cement Plaster(1:4) for foof slab including cost of conveyance royality taxes of all materials and labour T&P etc complete as directed by the Engineer in charge. |
| 24 | Ground Floor |
| 25 | First Floor (Head Room) |
| 26 | Brick work with Fly Ash bricks in C.M.(1:6)use in foundation, plinth and basement and for ornamental flower beds, plinth moulding,superstructureincluding cost, conveyance, royalties and taxes of all materials and cost of all labour, sundries and T&P. etc. as directed by the Engineer in charge. |
| 27 | Foundation & plinth |
| 28 | Superstructure |
| 29 | Ground Floor |
| 30 | First Floor |
| 31 | Brick work withFly Ash bricks in C.M.(1:4)use in superstructureincluding cost, conveyance, royalties and taxes of all materials and cost of all labour, sundries and T&P. etc. as directed by the Engineer in charge. |
| 32 | Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses purlins, frames of doors, widows, ventilator including cost, conveyance, loading, unloading,stacking, royalties, all taxes, cost of all labour, labour cess, T&P etc. complete in all respect as directed by the Engineer-in-Charge (A/R 2016, D.I Cuttack Order no-5262/IND Dt.12.05.2015 |
| 33 | 32mm thick Plywood Flush door shutter, Both side pasted with door screen (sunmica) complete with all fittings with wooden hinged cleats etc. fixed in position including all labour charges etc. complete as directed by the Engineer in charge. |
| 34 | Supplying providing & fixing of louvered glass ventilatorin aluminium section including cost, conveyance, royalties and taxes of all materials and cost of all labour, sundries and T&P. etc. as directed by the Engineer in charge. |
| 35 | Supplying, fitting and fixing in position M.S. grill of approved design in windows and ventilators made out of20mm. x 6mm. size M.S. flat / 10mm thick square bar including cutting the same to proper sizes, welding, chamfering and one coat of priming with red oxide and fixing with screws as may be required including cost, conveyance taxes of all materials, cost of all labour, sundries and T&P etc. |
| 36 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 9778, as windows frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-incharge. |
| 37 | Supplying, fitting and fixing of vitrified tiles on floorsof approved quality(SOMANY /KAJARIA/JOHNSON) (conforming to IS 13757), shade and 600 x 600mm thick size fixed on 20mm thick C.M (1:4) & filling joints with white cement of approved quality including cost all materials, takes labour T&P etc required for the work. per 1 sqm (Data for 10 sq.mt.) |
| 38 | Supplying, fitting and fixing of Granite (6\"x12\") slab flooring in staircase and outer steps with moulded edge of approved make conforming to IS:13755laid on floors, treads of steps and landing on 25mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, labour T&P and taxes of all materials complete in all respect as per direction of Engineer in charges. |
| 39 | Supplying, fitting and fixing of vitrified tiles on dadoof approved quality(SOMANY /KAJARIA/JOHNSON) (conforming to IS 13757), shade and 600 x 600mm thick sizefixed on 20mm thick C.M (1:3) & filling joints with white cement of approved quality including cost all materials, takes labour T&P etc required for the work. per 1 sqm (Data for 10 sq.mt.) |
| 40 | Supplying, fitting and fixing of Ceramic DIGITAL VC PLAIN & WOODEN PATTEN ofsize 60cmx60cm(SOMANY /KAJARIA/JOHNSON) oftileson dadoof approved quality (conforming to IS 13757) on 20mm thick C.M (1:3) & filling joints with white cement of approved quality including cost all materials, takes labour T&P etc required for the work. per 1 sqm (Data for 10 sq.mt.) |
| 41 | Supplying, fitting and fixing of Ceramic wall tile of size 30cmx45cm wall tiles (SOMANY /KAJARIA/JOHNSON) of approved quality thick size fixed on 20mm thick C.M (1:3) & filling joints with white cement of approved quality including cost all materials, takes labour T&P etc required for the work. per 1 sqm (Data for 10 sq.mt.) |
| 42 | 12mm thick cement plaster in cement mortar (1:6)to outside wall & finishing smooth to smooth surface of brick walls after raking out the joints including watering and curing, rounding of corners with cost, conveyance, royalties and taxes of all materials and cost of all labour, scaffolding, sundries and T&P. etc. required for the work etc. complete as directed by the Engineer in charge. |
| 43 | Ground Floor |
| 44 | First Floor |
| 45 | 16mm thick cement plaster in cement mortar (1:6) finishing smooth to rough surface of brick walls after raking out the joints including watering and curing, rounding of corners with cost, conveyance, royalties and taxes of all materials and cost of all labour, scaffolding, sundries and T&P. etc. required for the work etc. complete as directed by the Engineer in charge. |
| 46 | Ground Floor |
| 47 | First Floor |
| 48 | 6mm thick cement plaster to ceiling plaster in cement mortar (1:4) including closed deep chipping with slurry treatment to the R.C.C. surfaces finished smooth including watering and curing, rounding of corners with cost, conveyance, royalties and taxes of all materials and cost of all labour, scaffolding, sundries and T&P. etc. required for the work etc. complete as directed by the Engineer in charge. |
| 49 | Ground Floor |
| 50 | First Floor |
| 51 | supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materilas, labour, T&P etc. required for the complete in all respect. |
| 52 | Supplying, fitting and fixing of False ceilling with Arm strong Silhouette main runner, cross tee, wall angle with fine fishered RH-99 board on 4 walls to be fixed by means of steel screw, PVC plug & the NRC 0.55 sound attenction 34 db Arm strong grid 2\"-0\"\"x2\"-0\"\" suspended from ceilling including cost, conveyance, taxes of all materials, labour, T&P etc. required for the work complete in all respect as per direction of the Engineer-in-charge. |
| 53 | Cement washing one coat to plastered surfaces in all floors at all height including cost, conveyance and taxes of all materials and cost of all labour, curing, scaffolding and T&P. etc. required for the work etc. complete |
| 54 | Ground Floor |
| 55 | First Floor |
| 56 | Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. (per one Sq. Mtr.) (Data for 10 sqm.) INCLUDING COST OF MATERIL&Labour |
| 57 | Ground Floor |
| 58 | First Floor |
| 59 | Wall painting TWO coats with plastic emulsion paint over a coat of primmer (using Shalimar/Asian/Berger) of approved shade on new work to give an even shade including cost of brushes and putty including cost of paint. (per one Sq. Mtr.) (Data per 10 Sqm.) INCLUDING COST OF MATERIL&Labour |
| 60 | Ground Floor |
| 61 | First Floor |
| 62 | Painting two coats of weatherpaint over one coat primer (using Shalimar/Asian/Berger) to wall surface wuth approved shade and quality in all floors and all heights including preparing the surface, watering and curing with cost, conveyance, royalties and taxes of all materials and cost of all labour, scaffolding, sundries and T&P. etc. required for the work etc. complete as directed by the Engineer in charge. |
| 63 | Ground Floor |
| 64 | First Floor |
| 65 | Painting two coat to wood and/or iron works with enamel paint (using Shalimar/Asian/Berger) of approved shade and quality including sand papering and preparing the surface smooth including cost, conveyance and taxes of all materials and cost of all labour, scaffolding, sundries and T&P etc. required for the work complete as directed by the Engineer in charge |
| 66 | Providing antitermite treatment as per ISI specification including making holes 3\"0\" C/C both way oinject5ing cemical ewith water in propertion 1:20 etc complete |
| 67 | Supplying, fitting and fixing of 60 mm thick Paver Block of approved quality including cost all materials, takes labour T&P etc required for the work. per 1 sqm (Data for 10 sq.mt.) |
| 68 | Providing Tar Paper below plinthbend etc complete. including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-incharge. |
| 69 | Backfilling in F&P with excavated materials including watering and ramming as directed by the Engineer-in-Charge. |
| 70 | Conveyance of excavated earth 5Km.away from the work site by mechanical means etc complete as per direction of E.I.C. |
| 71 | E.I. Works |
| 72 | Note :- Obtaining all the statutory approvals and liasoning for obtainingnew Connection or load enhancement shall be in the scope of the contractor. It also includes electrical inspection. Only fees paid to the statutory authorities shall be reimbursed againest the submission of the original receipts and nothing extra shall be paid on this account. |
| 73 | SH-I : LIGHT CIRCUIT |
| 74 | wiring to light point/ fan point/ exhaust fan point /call bell point with 1.5 sqmm FR PVC insulated single core multistrand copper conductorof ISI marked with 20 mm dia non metalic FR PVC flexible PVC conduit with 5amp 250 V modular antibacteria switch ISI marked and ceiling rose ISI marked mounted on MS box having front modular cover of suitablesize with 1.5 sqmmFR PVC insulated single core multi strand copper conductor as earth wire includingall accesssoriesand connection.(wire Make - Finolex/Polycab/Havells/V-Guard/Anchor)(switch/cover Make -Legrand-Myricus/ ABB-Tvisha/ Panasonic-Europa)(The Switch /socket manufacturer has to submit the warranty certificate in the name of user agency to provide 10 years warranty) |
| 75 | GROUP A |
| 76 | GROUP B |
| 77 | GROUP C |
| 78 | Supplying and fixing of 6A modular antibacteria switch and socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(switch/Socket Make -Legrand-Myricus/ ABB-Tvisha/ Panasonic-Europa)(The Switch /socket manufacturer has to submit the warranty certificate in the name of user agency to provide 10 years warranty) |
| 79 | Supplying and fixing PVC batten/ angle holder including connection etc. as required in place of ceiling rose. |
| 80 | Supplying and fixing suitable size Gl box with modular plate and cover in Front on surface or in recess, including providing and fixing antibacteria 6 pin 5/6 & 15/16 A socket outlet and 15/16 A switch modular as required.( 1@ kitchen, 2@ inverter, 1@printer)(switch/Socket/cover Make - Legrand-Myricus/ ABB-Tvisha /Panasonic-Europa) (The Switch /socket manufacturer has to submit the warranty certificate in the name of user agency to provide 10 years warranty) |
| 81 | Supplying and fixing 20/25 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20/25 A \"C\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.(MCB Make- Legrand/ scheinder/Hager/Siemens) (6 @ACs) |
| 82 | Point wiring or looping for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit alongwith suitable size Gl box, anti bacteria modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A switch anti bacteria modular and earthing with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required.( 1 @Aquaguard water filter)(The Switch /socket manufacturer has to submit the warranty certificate in the name of user agency to provide 10 years warranty) |
| 83 | Wiring for twin control light point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess PVC conduit with 2 way antibacteriamodular switch with ISI marked MS box having front modular cover of suitablesize and earthing point with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor for loop earthing etc as required. (wire Make - Finolex/Polycab/Havells/V-Guard/Anchor)(FOR STAIRCASE)(The Switch /socket manufacturer has to submit the warranty certificate in the name of user agency to provide 10 years warranty) |
| 84 | Supplying and fixing anti bacteria modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 85 | Supply and fixing of 2 modules antibacteria electronic fan regulator ( Make - Legrand-Myricus/ ABB-Tvisha /Panasonic-Europa) (The Switch /socket manufacturer has to submit the warranty certificate in the name of user agency to provide 10 years warranty) |
| 86 | s/f of computer board 3 sockets and switches anti bacteria |
| 87 | SH - II : WIRING |
| 88 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.(Wire Make-Finolex / Havells / Anchor / Polycab / V Guard) |
| 89 | 2 X 2.5sq. mm + 1 X1.5sq. mm earth wire ( Switchboard, computer boards) |
| 90 | 2 X 4sq. mm + 1 X1.5sq. mm earth wire (16A, AC) |
| 91 | 4 X4sq. mm + 2 X 2.5 sq. mm earth wire (panel to light DB) |
| 92 | 4 X6sq. mm + 2 X 2.5 sq. mm earth wire (Panel to power DB) |
| 93 | INVERTER WIRING with 1.5sqmm PVC S/C multistrand Copper wire |
| 94 | SH-III : PROTECTION FOR LIGHT& POWER |
| 95 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 96 | TPN 6 way (8+18) IP 43with metal door (MAKE Legrand model EKINOX3 ETPN DB CATNO. 507671 or its equivalent ) |
| 97 | TPN 4 way (8+12) IP 43 with metal door (MAKE Legrand model EKINOX3 ETPN DB CATNO. 507670 or its equivalent ) |
| 98 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 99 | C Curve SP MCB 240/410V 6-32A (MAKE Legrand model DX3 MCB or its equivalentto Hager/ scheinder / Siemens ) |
| 100 | C Curve DP MCB 415V 6-32A (MAKE Legrand model DX3 MCB or its equivalentto Hager/ scheinder / Siemens ) |
| 101 | C Curve FP MCB 415V 6-32A (MAKE Legrand model DX3 MCB or its equivalentto Hager / Siemens ) |
| 102 | SH- IV : SFU, COS and MV Cable |
| 103 | s/f of 32A 4P Manual changeover switch |
| 104 | s/f of 63A 4W busbar chamber wall mounting type |
| 105 | s/f of 63A triple pole and neutral switch fuse unit /main switch (it will supply power to busbar) |
| 106 | Supplying & laying of one number PVC insulated unarmoured and PVC sheathed AL. conductor power cable of 1.1 KV gradePOLYCAB/HAVELLS/FINOLEX/KEI of 4CX16Sqmm cable.It includes supply & fixing of cable glands,lugs as per site requirement. |
| 107 | Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface as required |
| 108 | SH - V : EARTHING |
| 109 | Earthing with G.l. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate Jlaving locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 110 | Supplying and laying 25 mm x 5mm G.I. strip on surface or in recess for connection etc as required. |
| 111 | SH - VI : FITTING ITEMS |
| 112 | S/f of 300mm (12 inch) exhaust fan (make-Usha/ almonard/ cromton/ khaitan / havells) |
| 113 | S/F of 15W LED Ball lamp.(Make-Havell model Adora/ Surya/ Halonix /Bajaj / Crompton / Philips/ Jaquar/ Wipro/ Panasonic) |
| 114 | S/F of surface and wall mountable 20W LED linear batten fitting with electronic driver and other accessories. (make- Havells model Lumiline catno.BS20WLED865SPCWH or its equivalent to Surya/ Halonix /Bajaj / Crompton / Philips/ Jaquar/ Wipro/ Panasonic) |
| 115 | s/f of call bell |
| 116 | Supplying, installation, testing & commissioning of 15W portico light |
| 117 | Supplying, installation, testing & commissioning of 35W LED street light |
| 118 | S/F of ceiling fan 1200mm (48inch) sweep(make-Usha model similar to allureor their equivalent to bajaj elegance/ Crompton Hi breeze /orient summer crown) |
| 119 | Supply of 12W emerency LED Ball lamp with 4hrs approx.Backup. |
| 120 | s/f of 1 x 36 W Recess/surface Squaretype ceiling lightfitting (Clean led ) having efficiacy >100 lumens/watt with heavy duty industrial driver and other accessories for clean room purpose. ( Make-Havells or its equivalent to Surya/ Halonix /Bajaj / Crompton / Philips/ Jaquar/ Wipro/ Panasonic /IB). |
| 121 | s/f of 12W LED Slim, compact, auminum die cast edge lit panel. Recess mounted round fixture with opal diffuser and separate electronic driver ( Make-HAVELL MODEL integra Neo INTEGRANEODLR12WLED857S or its equivalent to Crompton/philips) |
| 122 | Supplying, installation, testing & commissioning of 120W LED street light |
| 123 | SH - VII: SAFETY EQUIPMENTS |
| 124 | Providing set of 4No 9.5L capacity G.I bucket painted in post office red colour with prior coat of red oxide paint and written with white paint \" FIRE \" and mounted on M.S angle iron framed with bracket including filling sand etc. |
| 125 | 2KG ABC fire extinguishers make-ceasefire |
| 126 | Supply and Erection of Rubber Mat of size 2m x 1m x 12 mm thick suitable for dielectric strength of15 KV (as per IS 5424 : 1969) complete in all respect. |
| 127 | Supply and fixing in position approved shock treatment chart written in English, Hindi and Odia. These charts shall be framed in wooden frame and coveredwith clear glass of thickness not less than 5 mm and front area not less than 1.2 sqm. |
| 128 | Supply and fixing in position the best quality danger notice boards of 2mm thick in approved shape and size as required by the local electrial Inspecting Authority wirtten in English, Hindi and Odia. (For 440 Volt & 11000 Volts). |
| 129 | Providing of ISI Marked 11 KV rubber gloves. |
| 130 | Supply and enameled first aid box of approved make standard medicine complete as per IS 2217: 1963 |
| 131 | Supplying and fixing of MS sheet board of size 500mm x 300mm of 16 SWG with \"Entry Restricted to Authorised Person Only\" near the main entrance. The lettering shall be black painted on yellow base. |
| 132 | SH-VIII :HVAC :UNIT TYPE SPLIT AC |
| 133 | SUPPLY OF 1.5TON 3 STAR SPLIT NORMAL HIGH WALL COPPER CONDESER TUBEAC MACHINE WITH ALL ACCESSORIES( MAKE - HITACHI MODEL OR ITS EQUIVALENT TO DAIKIN/BLUESTAR) |
| 134 | SUPPLY OF 1TON 3 STAR SPLIT NORMAL HIGH WALLCOPPER CONDENSER TUBE AC MACHINE WITH ALL ACCESSORIES( MAKE - DAIKIN MODEL OR ITS EQUIVALENT TO HITACHI / BLUE STAR) |
| 135 | Installation charges for AC |
| 136 | s/f of outdoor stand |
| 137 | SUPPLY OF COPPER PIPE WITH NITRILE RUBBER TUBE INSULATION OR ITS EQUIVALENT FOR SPLIT AC ALONGWITH DRAIN PIPE |
| 138 | Supply & wiring of 3C X 2.5sqmm2 PVC insulated &FR PVC round sheathed fexible Cu conductor Cable,1.1KV, conforming to IS:694 required for junction box to light fitting make should be havells/ KEI/Finolexs/ polycab.complete work in all aspects. |
| 139 | s/f ofstabilizer 90V inputsuitable for 1.5T ac (make Vguard or its equivalent ) |
| 140 | P.H. Works |
| 141 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. |
| 142 | 20mm dia PVC ASTM pipe (sch-80) |
| 143 | Ground Floor |
| 144 | 25mm dia PVC ASTM pipe (sch-80) |
| 145 | Ground Floor |
| 146 | 32mm dia PVC ASTM pipe (sch-80) |
| 147 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge. |
| 148 | 15mm dia CP angle stop cock(Jaquar)CON-CHR-053KN |
| 149 | 15mm dia CPtwo way bib cock (Jaquar)CON-041KN |
| 150 | 15mm dia CP Short body bib cock (Jaquar Make)CON-CHR-037KN |
| 151 | 15 mm dia CP Pillar Cock Swain neck |
| 152 | 20mm dia CP concealed stop cock (Jaquar Make)CON-CHR-83KN |
| 153 | 25mm dia brassfull way valve (Shakti make) |
| 154 | 32mm dia brassfull way valve (Shakti make) |
| 155 | 25mm dia CP Health Faucet (Jaquar Make)ALD - CHR - 573 |
| 156 | 15mm CP Extension piece |
| 157 | 125mm CP grating |
| 158 | 15mm size C.P. flange |
| 159 | Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge |
| 160 | 2000 liters capacityPVC water storage tank roof of ground floor |
| 161 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge. |
| 162 | Ground Floor |
| 163 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge |
| 164 | Ground Floor |
| 165 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 166 | Ground Floor |
| 167 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 (6kgf/cm2)to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge. |
| 168 | 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 169 | 110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 170 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 171 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 172 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 173 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 174 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 175 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 176 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 177 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 178 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 179 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. |
| 180 | 580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 181 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 182 | 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 183 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge |
| 184 | European water closet with \"p\" trap plain(Hindware/Parryware/Neycer make) |
| 185 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge |
| 186 | 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with Pedestal |
| 187 | Counter Top Basin (560x455) (Perryware/Hindware/nycer Make) white with 15mm C.P. Pillar cock (jaquar/essco) |
| 188 | Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink |
| 189 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 190 | 25mmx600mm long CP towel rail (Plaza make) |
| 191 | Towel ring (Plaza make) |
| 192 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. |
| 193 | 600mmx125mm plate glass shelf with CP/NP guard rail |
| 194 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. |
| 195 | Large Size mirror with Frame (3x0.90x0.90)= 2.43 |
| 196 | 600mmx450mm size B.E mirror (fixed type) |
| 197 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge |
| 198 | CP soap holder (Plaza make) |
| 199 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge. |
| 200 | ½” x 5” CPrevolving Shower (Plaza make) |
| 201 | Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 202 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 203 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge |
| 204 | Inside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 205 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. |
| 206 | Ground Floor |
| 207 | Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 208 | Ground Floor |
| 209 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 210 | Ground Floor |
| 211 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed seriesto be pre-approved by the Engineer-in-charge ) |
| 212 | Ceramic tile 30cmx30cm |
| 213 | Ground Floor |
| 214 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 215 | Ground Floor |
| 216 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge ) |
| 217 | Glazed tile 60cmx30cm |
| 218 | Ground Floor |
| 219 | Granite Tiles 10mm Thick |
| 220 | Ground Floor |
| 221 | Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 |
| 222 | Fitting & fixing of Aquagurad Cooler Cum Purifier for drinking water privision. 1no |
| 223 | Cost of Aquaguard Cooler - Cum Purifier |
| 224 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. |
| 225 | 20mm dia PVC ASTM pipe (sch-80) |
| 226 | Supplying all materials, labor, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge |
| 227 | 15mm dia CP angle stop cock(Jaquar)CON-CHR-053KN |
| 228 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge |
| 229 | 100mm dia P.V.C. pipe |
| 230 | 150mm dia P.V.C. pipe |
| 231 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. |
| 232 | MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover ) |
| 233 | Supplying all materials labour T&P and constructing deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 234 | constructing 1.40m dia x 2.00 m deep soak way pit |
| 235 | constructing 1.00m dia x 2.00 m deep soak way pit |
| 236 | 1 no 30 Users Septic tank |
| 237 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of theEngineer-in-Charge. |
| 238 | Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. |
| 239 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 240 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 241 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 242 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,bindingand tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 243 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as perspecification and direction of the Engineer-in-charge |
| 244 | RCC floor, roof slab chhaja up to 4.430 m height |
| 245 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:3 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 246 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 247 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 248 | Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification. |
| 249 | Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. |
| 250 | Supplying all materials labor T&P filling sand in foundation and plinth with well watered and rammed etc all complete as per direction of Engineer-in-charge. |
| 251 | Construction of 1nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories |
| 252 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only |
| 253 | Drilling of 200mm dia bore |
| 254 | 00 mtr to 30mtr |
| 255 | 31 mtr to 45mtr |
| 256 | Drilling of 150mm dia bore |
| 257 | 46 mtr to 165.00mtr |
| 258 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. |
| 259 | Lowering of 200mm dia P.V.C casing pipes |
| 260 | 00 mtr to 30mtr |
| 261 | 31 mtr to 45mtr |
| 262 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber \"O\" ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. |
| 263 | 200mm dia PVC (sch-80) pipe |
| 264 | Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) |
| 265 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge |
| 266 | By DTH Rig |
| 267 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: |
| 268 | Rocky terrain with boulder formation for 300m depth |
| 269 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make) |
| 270 | 1 H.P. Single phase/ three phase 3 stagehead renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby) |
| 271 | DOL Control panel |
| 272 | 40mm dia steel short piece |
| 273 | Well cap |
| 274 | 50mm size CI bracket |
| 275 | 2.50sqmm flat cable |
| 276 | 20mm dia rigid UPVC pipes |
| 277 | Steel rope with cover |
| 278 | Labour charges for lowering including transportation |
| 279 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge |
| 280 | 32mm HDPE pipes (Finolex/Supreme make) |
AI Tender Summary
Tender Timeline
Nov 18, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 24, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender