Construction Of Divisional Office At Pantha Chowk Srinagar For Truck Terminal Division (Ground Floor)
Tender Value
48.42 Lakhs
Estimated cost
Bid Submission
23 Nov 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pantha chowk → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Divisional Office At Pantha Chowk Srinagar For Truck Terminal Division (Ground Floor)
BOQ
| Sl. No. | Item Description |
| 1 | Consultancy charges for structural design including technical wetting by a reputed institute for as directed. |
| 2 | Clearing grass and removal of the rubbish outside the periphery of the area cleared as directed. |
| 3 | Earthwork in bulk excavation by mechanical means over areas (Exceeding 30cms in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth outside the muncipal limits or as directed by the engineer incharge, for all kinds of soil. |
| 4 | Providing and laying dry stone soling duly hand packed incl. all carriages, leads, liftsupto site of work complete job. |
| 5 | Providing and laying in position plain cement concrete M 7.5 grade (1 cement: 4 coarse sand : 8 crushed graded stone aggregate, 40 mm nominal size), all work upto plinth level, but excl. cost of formwork including all leads, lifts and carriage of material from source to site of work complete job. |
| 6 | Reinforced cement concrete work in walls, plinth, columns, piers, suspended floors, etc. (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, abutments, posts and struts, etc., upto floor five level, but excluding the cost of centering and shuttering, complete job. GradeM20 (1:1.5:3), with 20mm size crushed stone aggregateincluding all leads, lifts and carriage of material from source to site of work complete job. |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 150, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1.5:3 (1 cement : 1/2 coarse sand : 3 graded stone aggregate 20mm nominal size)including all leads, lifts and carriage of material from source to site of work complete job. |
| 8 | Brickwork with common burnt clay FPS bricks (Non Modular) of class designation 75 in foundation and plinth in cement mortar 1 : 6 (1 cement : 6 coarse sand),including all leads, lifts and carriage of material from source to site of work complete job. |
| 9 | Extrafor brickwork in superstructure above plinth level upto floor V level, by manual means, complete job. |
| 10 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length, (hold fast lugs or with dash fasteners shall be paid for seperately) : complete, using first class kail wood, completeincluding all leads, lifts and carriage of material from source to site of work complete job. |
| 11 | Providing and fixing ISI marked flush door shutters confirming to IS : 2202 (Part-I) non-decorative type, core of block board construction with frame of Ist class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35mm thick With ISI marked M.S pressed butt hinges bright finished of required size with necessary screws. |
| 12 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panels including ISI marked MS pressed butt hinges bright finished of required size with necessary screws incl. cost of glass panes (35mm thick in 1st class Kail Wood) with all leads, lifts and carriage of material from source to site of work complete job. |
| 13 | Providing and fixing of glass panes of approved quality 3mm thick clear float glass including wooden fillet/ moulded beading, putty, nails, screws complete. Glass panes weighing 10 kg/ Sqm. |
| 14 | Providing and fixing wire guaze shutters using galvanized M.S.wire gauze of average width for aperture 1.4mm in both directions with wire of dia 0.63mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge: 35mm thick Ist class Kail wood. |
| 15 | Providing and fixing of Hardware fittings of approved make complete job. |
| 16 | Handle 5\" |
| 17 | Handle 8\" fancy type |
| 18 | T-Bolts (4\") |
| 19 | T-Bolts (6\") |
| 20 | Droor Al-Drop 12\" with link lock |
| 21 | Door stopper |
| 22 | Stay hook 5\" |
| 23 | Hold fast |
| 24 | Anchor bolts |
| 25 | 15 mm Cement plaster on the rough side of single or half brick wall mix : 1:4 (1 cement : 4 fine sand), including all leads, lifts and carriage of material from source to site of work complete job (inner walls). |
| 26 | 12 mm Cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement : 4 fine sand), including all leads, lifts and carriage of material from source to site of work complete job. |
| 27 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete (2 mm thick). |
| 28 | Distempering with Istquality acrylic distemper (ready mixed) having VOC content less than 50 gms/ litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer\"s specifications. |
| 29 | Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete, 50 mm thick with 20mm nominal size crushed stone aggregate, including all leads, lifts and carriage of material from source to site of work complete job. |
| 30 | Supplying and filling RBM under rooms incl. compaction by raming watering etc.including all leads, lifts and carriage of material from source to site of work complete job. |
| 31 | Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90 litre/ 10 sqm over an under coat of primer applied @ 0.75 litre/ 10 sqm of approved brand and manufacture. |
| 32 | Formwork including centering and shuttering, strutting, propping, etc and its removal for foundation, footings, bases of coloums etc for mass concrete including all leads, lifts and carriage of material from source to site of work complete job. |
| 33 | Lintels, beams, plinth beams, griders, bressumers and contilevers. |
| 34 | Suspended floors, roofs,landings, balconies and acess, platform. |
| 35 | Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete thermo mechanically treated bars including all leads, lifts and carriage of material from source to site of work complete job. |
| 36 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 60x60 cm. |
| 37 | Providing and laying/ fixing Ceramic glazed wall tiles (thickness to be specified by the manufactures) of Ist quality conforming to IS: 13755 of Nitco, orient, kajaria,somany or equivalent make in colour shades except white, ivory, Grey, Fume Red, Brown laid on 20mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) including pointing the joints with white cement and matching pigments etc. complete (8 mm thick). |
| 38 | Providing and fixing B-Class PVC pipes of approved make for sewerage disposal including cutting of floors, walls, trenching and making good the same complete with putty, rubber washer etc. |
| 39 | 100mm |
| 40 | 75mm |
| 41 | Providing and fixing of B-class PVC fitting/ fixtures of approved make for sewerage disposal including cutting of floors, walls, trenching and making good the same complete with putty, rubber washer and adhesive. |
| 42 | Door bend 100 mm dia |
| 43 | Door bend 75 mm dia |
| 44 | PVC Collar 75 mm dia |
| 45 | PVC Cowl 75 mm x 100 mm dia |
| 46 | PVC stays and clamps for PVC pipes 100 mm dia |
| 47 | PVC stays and clamps for PVC pipes 75 mm dia |
| 48 | 100 mm (P-traps) |
| 49 | 75 mm (Floor traps) |
| 50 | Providing and fixing G.I pipes of approved brand and manefecture type-B |
| 51 | 20 mm dia nominal bore |
| 52 | 15 mm dia nominal bore |
| 53 | Providing and fixing ball valve (brass) of approved quality complete high or low pressure with plastic floats. |
| 54 | 20 mm dia nominal bore |
| 55 | 15 mm dia nominal bore |
| 56 | Providing and fixing G.I Union in G.I pipe including cutting and threading the pipe and making long screws etc. complete (new work) |
| 57 | 20 mm dia nominal bore |
| 58 | 15 mm dia nominal bore |
| 59 | Providing and fixing of brass ball cock with plastic ball and brass rod automatic arrangement complete with all accessories 15mm nominal bore |
| 60 | Providing and placing on terrace (at floor levels) polyethylene water storage tank ISI 12701 marked indicating the BIS license number with cover and suitable locking arrangment and making necessary holes for inlet, outlet and overflow pipes including all fittings (Like Tank Connection nipples, sockets, unions, etc.) but excluding the base supported for tank (Sintex, Electroplast, Star, Lotus or equivalent) having valid ISI License, with all leads, lifts and carriage of material from source to site of work complete job. |
| 61 | Providing and fixing of 25mm PVC conduit pipes including bends junction boxes and fan points for electric instalation in slab duly fastened with binding wire complete job. |
AI Tender Summary
Tender Timeline
Nov 17, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 24, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender