Composite Tender For Construction Of Block Level Mission Shakti Bhawan At Rasulpur In The District Of Jajpur For The Year 2021-22 Building Work
Tender Value
43.21 Lakhs
Estimated cost
Bid Submission
25 Nov 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panikoili → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Composite Tender For Construction Of Block Level Mission Shakti Bhawan At Rasulpur In The District Of Jajpur For The Year 2021-22 Building Work
BOQ
| Sl. No. | Item Description |
| 1 | Civil WorkEarthwork excavation of foundation in soil including levelling & dressing the bed up to the required depth & removing the excavated earth & depositing the same away from the work site within initial lead of 50 mtr & initial lift of 1.5 mtr, including cost, conveyance of all materials, labour T&P articles required for the work including shoring, shuttering, propping & dewatering if required, etc. complete in all respect as per the specification & direction of the Engineer-in-Charge. |
| 2 | Supplying and filling in foundation trenches and plinth with sand well watered andrammed in layers not exceeding 23cm in depth with all lead and lift including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge. |
| 3 | Providing and laying cement concrete of proportion (1:4:8) in foundation and floors with 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry, washed and cleaned including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P required for the work including shoring, shuttering and dewatering if required including hire & running charges of all machineries required for the work etc complete as per the direction of the Engineer -in -charge. |
| 4 | Cement Concrete of prop (1:2:4) in foumdation and floors using 20mm to 12 mm sizeblack (Crusher broken) granite chips of approved quality from approved quarry including cost, conveyance, royalities and taxes of all materials and all labour, T&P etc complete |
| 5 | 12mm thick cement plaster (1:4) over brick work including cement punning and bitumen painting over top of wall including watering and curing with cost and conveyance of all materials and labour with T&P required for the work with all taxes and royalties etc. complete in all respect in all floors as per the direction of the Engineer-in-charge. |
| 6 | R.C.Cwork of M-20 in following items using 12mm to 20mm black hard crusher broken chips of approved quality and from approved quarry including mixing, hoisting,lowering,laying, compacting concrete in layers of specific thickness conforming to technical terms & condition of M-20 grade concrete including cetering, shuttering,andfinished the exposed surface smooth providing beads where necessary including watering,curing with all cost, conveyeance, royality, taxes of all materials,all labour charges tool&plant articles requiredfor the work etc. complete as per the specification and direction of the Engineer-in-charge.Column Footing |
| 7 | Column |
| 8 | Plinth band |
| 9 | Lintel (G.F) |
| 10 | Lintel (F.F) |
| 11 | 65 mm thick Chajja |
| 12 | Roof Beam (G.F) |
| 13 | Stair Case `` |
| 14 | Roof Slab |
| 15 | Head Room (1st floor) slab |
| 16 | Cutting,Straightening, bentup or coiled rod cutting, bending, cracking, hooking, welding or jointing( if required).the tor rod and binding wire laying the reinforcementand placingin proper position as required for R.C.C work providing fanhooks when necessary including cost conveyance, royality,taxes of M.S or Tor steel and binding wire 18 to20 gauge and cost of all labour,tool & plant required for the work as per the specification and direction of the Engineer-in-charge. |
| 17 | Providing 20 mm. thick gradingplaster in all floors at all height with cement mortar of mix (1:4) and finished smooth to the rough surface including watering and curing, rounding of corners etc. complete with cost, conveyance, royalties and taxes of all materials, cost of all labour, T&P, sundries required for the work etc. as directed by the Engineer in charge.Ground Floor |
| 18 | First Floor |
| 19 | Fly ashbrick25cmx12cmx8cm masonry in cement mortar(1:6) after immersing bricks for six hours in water before use in foundation and plinth with all necessary projections using Bricks of 10” size having a crushing strength of not less than 75Kgs/Sqcm with dimensioinal tolerance + perceent. Including splays cutting, circular moulding, chamfering, corbelling and similar such types of works with all necessary projections watering and curing. complete including cost and conveyance, royality & taxes of all materials and labour with T&P required for the work with all etc. complete in all all respect in all floors with all other specifications as per the direction of Engineer-in-charge. |
| 20 | Fly ashbrick25cmx12cmx8cm masonry in cement mortar(1:6) after immersing bricks for six hours in water before use in Superstructure with all necessary projections using Bricks of 10” size having a crushing strength of not less than 75Kgs/Sqcm with dimensioinal tolerance + perceent. Including splays cutting, circular moulding, chamfering, corbelling and similar such types of works with all necessary projections watering and curing. complete including cost and conveyance, royality & taxes of all materials and labour with T&P required for the work with all etc. complete in all all respect in all floors with all other specifications as per the direction of Engineer-in-charge. (G.F) |
| 21 | Superstructure (First Floor) |
| 22 | Fly ashbrick25cmx12cmx8cm masonry in cement mortar(1:4) after immersing bricks for six hours in water before use in Superstructure with all necessary projections using Bricks of 10” size having a crushing strength of not less than 75Kgs/Sqcm with dimensioinal tolerance + perceent. Including splays cutting, circular moulding, chamfering, corbelling and similar such types of works with all necessary projections watering and curing. complete including cost and conveyance, royality & taxes of all materials and labour with T&P required for the work with all etc. complete in all all respect in all floors with all other specifications as per the direction of Engineer-in-charge. |
| 23 | Supplying fitting and fixing in position 30/32 mm factory made Flush door shutters laminated both side sunmica with adhesive including fixing of fixtures like godrej make Mortice lock having model No. 9168, Godrej make door closure having model no 8340, 100mm aluminium hinges handle, tower blot, stopper |
| 24 | Providing and fixing of Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel (base steel as per IS-513 of 0.6 mm thick “D” quality, galvanized as per IS277 with zinc of 120 Gm/Sq.mtr) with paint specification being with primer of 5-7 microns and finished paint with polyster paint (Black /Pearl white/ Chocolate Brown) of 12-16 microns alongwith the alkyd backer at the back of 5-7 microns and the sizes of outer frame being of 46x52 mm and with all vertical and horizontal mullions are of 46x70 mm and fixed beadings are of 18x25 mm. Accessories / gaskets are to be used as per the manufacturer’s supply and specification like handle being made of high grade aluminium powder coated and with nylon receiver and gasket will be made of EPDM. All corner _ brackets are to be made of CRCA with zinc phosphating. The mullion caps and louvered-clips should be of glass filled nylon. The sections are to be cut to length ,mitre joined with corner bracket and frames are fixed to the concrete/masonry walls by means of self expanding screws and glass to be used of 5 mm reflective with all taxes complete |
| 25 | Supplying, fitting and fixing in position M.S Grill of approved design in windows and ventilators made out of 20mm x 6mm size M.S flat/10mm thick square bar including cutting the same to proper sizes, welding, chamfering and one coat of priming with red oxide and fixing with srews as mat be required including cost, conveyance taxes of all materials, cost of all labour, sundries and T&P etc |
| 26 | Supplying fitting and fixing of sliding window of Alluminium sec 9778 as window frame, sec no. 4095,4096 and 9777, 3994 as shutter frame with 5mm thick black glass as pannel fittedwith rubber beading including locking arrangement including all fitting including cost of materals all taxes labour , T&P etc complete as per dierction of the Engineer-in-Charge. |
| 27 | Supplying, fitting and fixing of vitrified tile on floors of approved quality (conforming to IS 13757), shade and 600 x 600mm thick size fixed on 20mm thick C.M. (1:3) & filling joints with white cement of approved quality including cost all materials, takes labour T&P etc required for the work |
| 28 | Fixing of granite tiles in dados skirting and risers of steps (Stair case) on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost ofprecasr tiles etc compelte as per direction fo Engineer-in-Charge. |
| 29 | Supplying, fitting and fixing of vitrified tile on dadoo of approved quality (conforming to IS 13757) shade and 600 x 600mm thick size fixed on 20mm thick C.M. (1:3) & filling joints with white cement of approved quality including cost of all materials, takes labour, T&P etc required for the work |
| 30 | Supplying, fitting and fixing of Ceramic tile 20cm x 30cm & 20cm x 20 cm wall tiles of approvedquality thick size fixed on 20mm thick C.M. (1:3) & filling joints with white cement of approved quality including cost of all materials, takes labour, T&Petc required for the work |
| 31 | Providing 12 mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) to inside and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete in all respect with providing grooves as directed by the Engineer in charge.Ground Floor |
| 32 | First Floor |
| 33 | Providing 16 mm. thick out side in cement plaster in all floors at all height with cement mortar of mix (1:6) and finished smooth to the rough surface of masonry walls after racking out joints including watering and curing, rounding of corners etc. complete with cost, conveyance, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer in charge.Ground Floor |
| 34 | First Floor |
| 35 | Providing 6mm thick Cement Plaster(1:4) to RCC surface finished smooth including closed deep chipping & slurry treatment with ordinary Portland cement (OPC) and with screened and washed sharp sand for mortar and finished smooth to the rough surfaceincluding watering and curing rounding of corners etc. complete with cost, conveyance, royalties and taxes of all materials, cost of all labour, T&P, sundries and scaffolding required for the work etc. complete in all respectas directed by the Engineer in charge.Ground Floor |
| 36 | First Floor |
| 37 | Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia and 2mm thick circular pipe with balustrade of size 32mmX32mmX2mm @0.90mtr. C/C and stainless square pipe bracing of above size in three rows in staire case as per approved design and specification, buffing, policing etc. including cost, conveyance of all materilas and labour,T&P required for the work as per direction of Engineer-in-charge. |
| 38 | Cement Washing one coats to plaster surface including sand papering and making the surface smooth with cost, conveyance, taxes of all materials, cost of all labour, sundries T&P scaffolding etc. required for the work complete in all respect as directed by Engineer-In-Charge.Ground Floor |
| 39 | First Floor |
| 40 | Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete as directed by the Engineer-in-charge.Ground Floor |
| 41 | First Floor |
| 42 | Painting two coats to wall surface with plastic emulsion paint over a coat of primer of approved shade on new work to given and even shade including watering and curing, scaffolding etc. complete including cost, conveyance, royalty and taxes of all materials with labour, T&P, sundries etc. complete as directed by the Engineer-in-Charge.Ground Floor |
| 43 | First Floor |
| 44 | Wall painting 2 coats with weather coat paintover one coat primer of approved shade on wall surface over a coat of water bound wall cement primer to give an even shade including cost of brushes and putty including cost of paint scrapping, cleaning rubbing, scaffolding etc.complete as directed by the Engineer-in-charge. Ground Floor |
| 45 | First Floor |
| 46 | Painting two coats withenamel paint over a coat of priming of approved quality and approved shade confirming to ISI on Wood/Iron works to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, conveyance, taxes of all materials, cost of all labour, sundries T&P scaffolding etc. required for the work complete in all respect as directed by Engineer-In-Charge. |
| 47 | Filling in foundation & plinth with excavated earth including watering and rammingand labour with T&P required for the work and dewatering if required for the work etc complete and as directed by the Engineer-in-charge. |
| 48 | Providing antitermite treatment as per ISI specification including making holes 3\"0\" C/C both way on injecting cemical with water in propertion 1:20 etc complete |
| 49 | Supplying, fitting and fiixng of 60 mm thick paver block of approved quality including cost of all materials, takes labour T&P etc required for the work as per direction of the Engineer-in-charge |
| 50 | Providing Tar paper below plinthbend etc complete as per direction of the Engineer-in-charge |
| 51 | E.I WorkRecessed wiringto light point/ fan point/Call bell point with 1.5sqmm FR PVC Insulated single core multistarand copperConductorof ISI marked with 20mm dia non metalic PVC flexible conduct with 6Amps modular type switch socket & 1.5sqmm FR LS PVC Single core multistrand copper conductor as earth wire includingallaccessories and connection as per direction of Engineer in charge (Make-Legrand / L&T/ Havels ) -do-light pointGroup-A |
| 52 | -do-light pointGroup-B |
| 53 | -do-light pointGroup-C |
| 54 | -do-Fan pointGroup-B |
| 55 | -do- Fan pointGroup-C |
| 56 | -do-Call Bell pointGroup-C |
| 57 | Supply and fixing of metal box 150x75x60mm deep on surface with laminated cover for fixing 5/6Amps switch & socket etc as per direction of Engineer-in-charge.Make-Anchor/Cona |
| 58 | Supply and fixing of 5/6Amps socket on existing board.Make-Anchor/Cona |
| 59 | Supply and fixing ofmodularmetal Box of 180mm x100 X 60 mm nominal size in recess withfixing of 5 pin,15/16 Amp paino type switchsocket , ISI marked connection painting etc as required complete in all respect as per direction of Engineer in charge(Make- Anchor / Cona) |
| 60 | Recessed wiring to submain in the following insulated single core multistrand copper conductor of ISI markedin the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulatedsingle core multistrand copper conductoras earth wire as required complete in all respect as per direction of Engineer-in-charge.(Make of wire-Finolex/L&T/Havells)2x1.5 sqmm +1x1.5 sqmm |
| 61 | 2x2.5 sqmm +1x1.5 sqmm |
| 62 | 2x4 sq mm+1x1.5 sqmm for AC connection from panel board. |
| 63 | 2x6 sq mm+1x2.5 sqmm( panel toMCB Box) |
| 64 | S/F of 1x1.5sqmm pvc wire for Inverter wiring. |
| 65 | Supply and fixing ofEarthing G.I. Pipe 3mtr long 40mm dia ISI Marked including all required acessories. |
| 66 | S/F of copper plate Earthing (600 x 600 x 3.15)mm thick ISIMarked with complete without salt & charcoal. |
| 67 | S/F of Extra salt & charcoal. |
| 68 | Providing and fixing no-8 copper wirefor laying of Earthing. |
| 69 | Supply and fixing of followingMCB distribution board 250V on recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Make-siemens/ Legrand/schnider 12wayDouble door |
| 70 | Supply and fixing of following MCB \"C\" series suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc (Make- siemens/ Legrand/schnider )6/10Amps single pole MCB. |
| 71 | 63Amps double pole MCB. |
| 72 | Supply and fixing of Bakelite Angle holder/Batten Holder of ISI marked in place of ceiling Rose completein all respect as per direction of Engineer in charge (Make : Cona / Anchore) |
| 73 | Supply and fixing of 9watt LED lamp.Make-Havells/Philips |
| 74 | Supply and fixing of 1x30watt LED Tube light fitting withcomplete with as per direction of Engineer-in-charge.Make- Philips/Bajaj |
| 75 | Supply and fixing of 90watt LED street light fitting withcomplete with as per direction of Engineer-in-charge.Make- Philips/Bajaj |
| 76 | Supply and fixing of surface mounted luminar with powder coated 22watt & lumen output 100lumen with complete.Make-Philips/Crompton/Bajaj |
| 77 | Supply and fixing of30watt LED street light at the roof entrance .Make-Philips/Crompton/Bajaj |
| 78 | S/Fof 1200mm sweep white/milky colour ceiling fanwith electronics regulator ISI Markedincludingconnection complete in all respect as per direction of Engineer in charge (Havells velocity/Crompton jura/Orient PSPO) |
| 79 | Supply and fixing of heavy duty type Extra fan down rod 24x3cm |
| 80 | Supply and fixing of fanhock. |
| 81 | Supply and fixing of 12 inchHeavy duty (Metalic Colour)Exahust Fan with wall cutting, S/F of proper size of hume pipe, concreating, plastaring, painting with all connection testing and commissioning complete in all respect as per direction of Engineer in charge(Make Almonar/Khaitan,V-guard) |
| 82 | Supply and fixing of 16inch dia Wallmounting fan with complete.Make-Havells/Usha |
| 83 | Supply & Installationof A.C. starter modular type,L&T/Siemens make with overload relay 9-14Amps fited with suitable box as per direction of Engineer-in-charge. |
| 84 | Supply and fixing of computor point const of 3nos Modular type switch socket on a suitable board including connection.Make-Anchor/Cona |
| 85 | Supplyof 1.5sqmm 4core copper fexiable cable for streetlight supply. .Make-Havells/Polycap |
| 86 | Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KVgrade of size not exceeding 25 sq.mm on surface as required. |
| 87 | Supply and fixing of ding dang call bell.Make-Anchor/Cona |
| 88 | Supply and fixing of 1500VA Inverter with 2nos 150AH battery including all required acessories.Make-Microtech |
| 89 | Supplyof 25sqmm 4core Allum Armoudcable for mainsupply. .Make-Havells/Polycap |
| 90 | Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of sizeexcedding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation , sandcushioning, protective covering and refilling the trench etc. as required. |
| 91 | Supply,Installation,testing & commissioning of 3phase Indoor type panel board.Incoming-100Amps4pole MCCB-1no,100Amps 4pole changeover switch-1no with copper busbar.Outgoing-63Amps 2pole MCB-2Nos,32Amps 2pole MCB-3nos with digital parameter in all respect as per direction Engineer-in-charge.Make-Havells/Legrand/L&T |
| 92 | P.HSupplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipesconforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge.20mm dia PVC ASTM pipe (sch-80) In ground floor |
| 93 | 25mm dia PVC ASTM pipe (sch-80) |
| 94 | 32mm dia PVC ASTM pipe (Sch-80) |
| 95 | 50mm dia PVC ASTM pipe (Sch-80) |
| 96 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.In ground floor a.250mmthick wall |
| 97 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of theEngineer in charge.In ground floor |
| 98 | Supplying allmaterials, labour, T&P and cutting grooves in pucca floors and walls for takingGI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.In ground floor |
| 99 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge 15mm dia CP bib cock FLR-MCH-5047N(Jaquarmake ) |
| 100 | 15 mm dia 2 WAY BIB COCK WITH WALL FLANGE (FLR-MCH-5041NJaquar Make) |
| 101 | 15mm dia CP Health foucet (ALD-SSF-579 Jaquar make) |
| 102 | 15 mm dia CP Long bodyBib cock( FLR-MCH-5043N Jaquar make ) |
| 103 | 15mm dia CP ANGULAR STOP COCK WITH WALL FLANGE (FLR-MCH-5053N Jaquar Make ) |
| 104 | 20mm dia CP CONCEALED STOP COCK EXT HVY WTH W FLANGE( FLR-MCH-5083NJaquar)Make |
| 105 | 15mm dia C.P. Pillar cock (FLR-MCH-5011N Jaquar make) |
| 106 | 25mm dia PVC Ballvalve |
| 107 | 32mm dia PVC Ballvalve |
| 108 | 50mm dia PVC Ball valve |
| 109 | 25mm dia PVC Ball Cock |
| 110 | 15mm dia CP flange |
| 111 | 15mm dia CP extension piece |
| 112 | Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet with CP shower arm including polishing all complete as per specification and direction of the Engineer in charge15mm dia CP revolving shower ( Plaza make ) |
| 113 | Supplying all materials, labour, T&P and fitting and fixing10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge. 10 litres capacity pvc low level cistern with 32mm dia CP long flush bendSlimline white |
| 114 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering,watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in chargeOn the roof of groundfloor 2000litre capacity water storage tanks ( Sintex / Supreeme make ) |
| 115 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricantby non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in chargeIn ground floor. 110mm dia U-PVC SWR pipe(Ashirbad/Supreeme ) |
| 116 | 110mm U-PVC doorCross tee |
| 117 | 110mm U-PVC door tee |
| 118 | 110mm U-PVC Plain tee |
| 119 | 110mm U-PVC door bend |
| 120 | 110mm U-PVC plain bend |
| 121 | 110mm dia U-PVC \"P\" trap |
| 122 | 110mm dia U-PVC offset with out ear |
| 123 | 110mm dia U-PVC Plain ShoeBend |
| 124 | 110mm dia U-PVC cowl |
| 125 | 125mm dia CP grating |
| 126 | 110mm dia PVC SWR Clamp/Clip. |
| 127 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all completeas per PH specification and direction of the Engineer in charge .250mm to 375mmthick wall |
| 128 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge580mm size Orissa pan (Hind waremake) |
| 129 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge.European water closet with ‘S’ trap plain (Hind ware make ) |
| 130 | Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming to IS:771-part-3-1985 of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Stall urinal (Hindware make ) |
| 131 | 15mm dia urinal spreader |
| 132 | 32mm dia C.P. dome waste |
| 133 | Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge . 600x450x250 mm stainless Steelkitchen sink-glossy-IS: 13983-1994(jayna make ) |
| 134 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste,etc all complete as per specification and direction of the Engineer in charge . 550mmx400mm size wash hand basin with porcelain pedestal( Hind waremake) |
| 135 | Under counter top basin(Hindware)No.10095+ALD-709+ALD-803AB+KUB-35001F |
| 136 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5mm thickon 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge600mmx450mm size B.E mirror x minimum 5mm thick |
| 137 | Big size Mirror 1 x 1.80 x 0.90 |
| 138 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 600x125mm plate glass shelf with CP guard rails |
| 139 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge 25mmx450mm long CP towel rail |
| 140 | C.P. Ring Towel Rail |
| 141 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder |
| 142 | Supplying all materials labour T&P and filling in foundation and plinth with sandwellwatered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction ofEngineer in charge In ground floor |
| 143 | Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 144 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 145 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 146 | Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in chargeKajaria / Somany / Johnson to be pree approved of 30cm x 30cm size .In ground floor |
| 147 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in chargeKajaria / Somany of size 30 cm x 45 cm In ground floor |
| 148 | Supplying all materials, labour, T&P and fixing granite tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge in ground floor |
| 149 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs up to 4.30m height |
| 150 | Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 151 | Supplying all materials, labour,T&P and providing cement concrete(1:1 ½:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 152 | Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In groundfloor |
| 153 | Supplying fitting and fixing 30mm thick Solid panel PVC door shutter consisting of frame made out of MS tube of 19 gauge thickness and size of 19mmx19mm for stile & 15mmx15mm for top and bolt rails set with PVC door frame(Choukatha)of size 50mmx47mm is made out of 5cm thick sheet properly joined with solvent cement adhesive as per section view with MS square tube of 19mm of 19mm gauge to be inserted inside to give extra structural strength the price is inclusive of all cost of all materials labour,T&P etc.complete in all respect as per direction of the Engineer-in-charge. |
| 154 | EXTERNALP.H. WORK. Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasingincluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia all round concrete pipe |
| 155 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in chargeInside size 250mmx250mm |
| 156 | Supplying all materials, labour, T&P and constructing inspection chamber of the following sizewith cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ashbrickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge Inside size 760mmx760mmx460mm |
| 157 | ---- do --- addl depth of 0.15m upto 0.90m |
| 158 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. 1.20m dia x 2.00m deep soakway pit |
| 159 | Construction of 20 users septic tank Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of theEngineer-in-Charge. |
| 160 | Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. |
| 161 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 162 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 163 | Supplying all materials, labour, T&P and providing brick work with Fly Ashbricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.F/P |
| 164 | Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 165 | Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 166 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor androofslabs |
| 167 | Supplying all materials, labour, T&P and providing M.Sreinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor |
| 168 | Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 169 | Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm UPVCTee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in charge110mm dia UPVC Tee |
| 170 | Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls ofman hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge. |
| 171 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge |
| 172 | Sinking of 125 mmdia tubewell through hand boring (water jet ) method (1nos).Supplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge |
| 173 | Supplying alllabour, T&P and transporting the boring pipes, top casing , grouting pipes, P.V.C pipes and fittings, P.V.C well screens, cement, bentonite and gravels etc to the worksite including loading and unloading etc all complete as per direction of Engineer in charge |
| 174 | Supplying alllabour, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kinds of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as per direction of Engineer in charge. Drilling pilot bore from 0 to 360 metres . |
| 175 | Supplying alllabour, T&P and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction of Engineer in charge Reaming 100mm to 150mm diafrom 0 to 360 metres |
| 176 | Reaming 150mm to 200mm dia from 0 to 360 metres |
| 177 | Reaming 200mm to 250mm dia from 0 to 360 metres |
| 178 | Supplying alllabour, T&P and jointing materials and lowering the 300mm dia top casing pipes into the position and removing the same after use all complete as per direction of Engineer in charge from 0 to 360 metres |
| 179 | Supplying alllabour, tools and plant and jointing materials and lowering the pvc casing pipes, fittings and well screens in position including fitting and fixing of centraliser, cutter plug and washing the bore etc complete as per the direction of the Engineer in charge |
| 180 | Cost of 125mm Dia casing Pipe |
| 181 | Cost of 125 mm dia PVC pipe Cutting slot 1 x 5m |
| 182 | Cost ofC.I. cutter plug |
| 183 | Supplying all labour T&P and grouting with cementslurry for salinesealing intheborearoundthe 125 mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge. |
| 184 | Cost of cement |
| 185 | Supplying all labour, tools and plant and packing the bore with washed gravel (size P-6) around the pipes in good quality excluding cost of gravel etc all complete as per the direction of the Engineer-in-charge |
| 186 | Cost and Conveyance of Gravel |
| 187 | Supplying all materials labour and T&P and grouting with cement slurry for sanitary sealing around the GI/PVC casing pipe up to 3 mtrs. Below ground level including cost of cement all complete as per the direction of Engineer-in-Charge |
| 188 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By Compressor |
| 189 | Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge 1H.P three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.M.P with outlet dia of 32mm |
| 190 | DOL Control panel |
| 191 | 32mm dia steel short piece |
| 192 | Well cap |
| 193 | 50mm size CI bracket |
| 194 | 2.50sqmm flat cable |
| 195 | 20mm dia rigid UPVC pipes |
| 196 | Steel rope with cover |
| 197 | 40mm dia HDPE pipe |
| 198 | Labour charges for lowering including transportation |
| 199 | Supplying all materials, labour, T&P and constructingBore well protectionchamber of the inside size 650x650x1000hightwith cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ashbrickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4)inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. |
AI Tender Summary
Tender Timeline
Nov 17, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 26, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender