|
| 1 | Road |
| 2 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Providing and laying of dry stone soling hand packed in foundations |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete |
| 6 | 12 mm thick cement sand plaster of (1:4) mix |
| 7 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) in plinth above plinth level |
| 8 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in(1:6) mix |
| 9 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.40 MM THICK |
| 10 | Providing and laying Ceramic glazed floor /WALL tiles (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 11 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, allcomplete as per the direction of Engineer-In-charge |
| 12 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 13 | Renewing glass panes, with putty and nails wherever necessary including raking out old putty : 14.6.1 Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) |
| 14 | Dismentling pre cast concrete thickness upto 40 mm including stacking within 5o mtrs |
| 15 | provision for renewing False celing ,windows shutters ,Grills ,Main Gate |
| 16 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 17 | Carriage of bricks for 20 Kms average lead from Source to site of work andhead load of 50 mtrs |
| 18 | Carriage of Aggregate for 25 Kms average lead from Source to site of work andhead load of 50 mtrs |
| 19 | Carriage of Solingfor 20 Kms average lead from Source to site of work andhead load of 50 mtrs |
| 20 | Carriage of Sand for 30 Kms average lead from Source to site of work andhead load of 50 mtrs |
| 21 | Add provision for sign board photograph,Electric fittings,carrage of steel and cement and tiles |
