Pradhan Mantri Gram Sadak Yojana-PMGSY has published Construction And Maintenance ( 5 Years ) Of 30M. Steel Truss Bridge At Km 22.00 ( X / S-21 / 34 ) Of Saur To Osala, L021 ( Ut1304 ) -2Nd Call Construction And Maintenance ( 5 Years ) Of 30M. Steel Truss Bridge At Km 22.00 ( X / S-21 / 34 ) Of Sa. Submission Date for this Tender is 23-11-2021. Bridge Work Tenders in barkot uttarkashi Uttarakhand. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | FOUNDATIONS |
2 | Earth work in excavation of foundation of structures as per the Drawings, Specifications enclosed with the tender dacument Ministry of Shipping, Road Transport & Highways (MoRT&H) Specifications for Road and Bridge Works. |
3 | For Abutment |
4 | Odinary Soil( Manual Means) Up to 3.0 M |
5 | Odinary Soil( Manual Means) 3.0M To 6.0 M |
6 | Odinary Soil( Manual Means) Above 6.0 M |
7 | Hard Rock (blasting Prohibited) |
8 | Providing concrete for plain/reinforced concrete in open foundatoins complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203. PCC M 15 |
9 | Plain/reinforced cement concrete in open foundation complete as per drawing and technical specifications.RCC M 25 using concrete mixer |
10 | Supply, fitting and placing un-coated HYSD bar reinforcement in foundation complete as per drawing and technical specifications. |
11 | ABUTMENTS AND FILLING BEHIND: |
12 | Plain/Reinforced cement concrete in open foundation complete as per drawing and technical sepecifications, RCC Grade M 30 using concrete mixer |
13 | Ht. up to 5 m. |
14 | Ht. 5-10 mtr. |
15 | Supplying, fitting and placing un-coated HYSD bar reinforcement in foundation complete as per drawing and technical specifications. |
16 | Providing and laying of Filter Media with granular materials/stone, crushed aggregates satisfying the requirements laid down in Clause 2504.2.2 of MoRT&H Specifications for Road and Bridge Works to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutments, return walls etc. to the full height compacted to a firm condition complete as per the Drawings and Specifications. Item to include all labour, materials, tools, equipment, safety measures and incidentals necessary to complete the work to Specifications. |
17 | Providing weep holes in abutment walls, return walls etc. with 100mm dia AC/PVC pipe, extending through the full width of the structure with slope of 1V:20H towards draining face as per the Drawings, Specifications enclosed with the tender document andMoRT&H Specifications for Road and Bridge Works. Item to include all labour, materials, tools, equipment, safety measures and incidentals necessary to complete the work to Specifications. |
18 | Backfilling behind abutments, wing walls and return wall complete as per technical specifications. |
19 | SUPER STRUCTURE |
20 | Supply and fabrication of steel truss ( Structure ) bridge as per detailed drawing. Supply of all structural steel confirming to I.S. 226 - 1969 required for proper completion of bridge including ground erection of the bridge and including one coat of approved quality anty corrosive red oxide paint confirming I.S. 5660 as per specification and drawong including all T&Petc. nuts & bolts, washers, railing of MS flat and also including supply and fixing of shop rivets refered as per drawing. The rates shall include ground errection in thr workshop and its dismantle after inspection, approval and removing of deffects, match marking of all parts numberings and proper stacking in the premises of workshop before cartage to site of work. The work shall be execuited in accordance with I.S. 1915 - 1961 and its latest revision shall be applicable. The rate shall including cost of all materials, its wastage and cutting, bending if required, welding, making holes, shop rivetting, labour, T&Petc. and also including proper stacking after dismantling of ground erection. All required equipments should be arranged by the contractor as his own cost, which shall be taken back by the contractor after satisfactory execution of the job. Also including supply materials. T&P etc. required for proper copletion of the work as per direction of Engineer -In - Charge. |
21 | Erection of Steel Truss Structere Bridge as per drawing with required camber including cartage of fabricated parts from the place of stack near site including submission of launching plan by the contractor, (duly weighted by a recognised reputable institution/consultant ) and approved by the engineer-in-charge. Service bolts to used shall be of GKW make or any other as approved by engineer-in-charge, including cost of all labor, T&P, equipments and consumables required for proper completion of the work as per MoRT&H Specifications for Road and Bridge Works no. 1905 and as per directions of the engineer-in-charge. |
22 | Supplying, fitting and fixing in position true to line and level POT-PTFE bearing (Excluding Cost of Bearing) consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, completre assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 partI & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per drawing and approved technical specifications |
23 | Supply and Fixing of 20 mm dia P.F. make 8.8 grade HSFG High strength Friction Grip Bolt ot IS 3757:1985 latest to grade 8.85 with high strength Friction grip nu to IS 6623:2004 letest to grade 105 and high strength Friction 2 Nos. washer including cost of all material, labour, fixing at site all laxes, T&P etc required for proper completion of the work (20 x 100 mm) |
24 | Furnishingand Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification for solid slab super-structure RCC M 25 |
25 | Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per Drawing and technical specification |
26 | Painting on Steel surfaces Providing and applying two coats of readymix paint of approved brand on steel surface after through cleaning of surface to give an even. |
27 | Drainage Spouts complete as per drawing and technical specification. |
28 | PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification |
29 | Reicforced cement concreate (M30) approach slab including form work but excluding reiforcement steel, complete as per drawing and Technical specification. |
30 | Providing and laying cement concrete wearing coat M - 30 grade including reinforcement complete as per drawing and technical specification |
31 | Providing and laying of strip seal expansion joint catering to maximum horizontal movement upto 70mm( complete as per approved drawings and standard specifications )to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer"s instructions for installation. |
32 | Dewatering from foundtion of abutments and wing walls (with pump capacity 4000 lit per Hr.) including wages of operator and furle including supply of all material, labour and T&P etc, required for proper completion ot the work. |
33 | Providing & Fixing 25 mm dia 1.40 m. long rock anchoring including supply of all materials T&P etc complete in all respect . |
34 | PROTECTION WORK & APPROACH ROAD |
35 | Excavation for Structures Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. |
36 | Providing concrete for plain/reinforced concrete in open foundations complete as perdrawing and technical specifications Clause 802, 803, 1202 & 1203, PCC M-15 |
37 | stone masonry in cement mortar of substructure complete as per drawing & technical specification Clause 702, 704, 1202 and 1204, in cement mortar (1:5) |
38 | Hand Packed stoen filling in back of walls including cost of all materials,royality, T&P etc. complete as per direction of engineer-in-charge. (As per PWD Uttarakhand Specification) |
39 | Pointing with cement mortar 1:3 |
40 | Cement plum masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P, Roylty etc. required for proper completion of the work as per direction of Engineer in Charge.(As per PWD Uttarakhand specifications) |
41 | Providing and laying of boulder apron laid in wire crates for weir etc with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10% extra for laps and joints laid with stone boulders weighting not less than 25 Kg each as per drawing and technical specification Clause 1301. Sr.no:- 14.2 |
42 | OTHER WORK |
43 | Construction of parapet as per standard drawing including supply of all material, labour, T&P etc. requried of proper completion of the work |
44 | White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1916 of MORD Specification for Rural Roads 2014 |
45 | Providing & Fixing Title information board as per standard drawing duly painted and written as per direction of Engineer-in-charge in the starting and end of the road. |
46 | Providing & Fixing Maintenance board as per standard drawing duly painted and written a per direction of Engineer-in-charge. |
47 | Providing & Fixing Citizen Information board as per standard drawing duly painted and written a per direction of Engineer-in-charge. |
48 | Providing and Fixing "Logo" of PMGSY Project Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
49 | Maintainance Activities: |
50 | Cement plum masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P, Roylty etc. required for proper completion of the work as per direction of Engineer in Charge.(As per PWD Uttarakhand specifications) |
51 | III rd year |
52 | V th year |
53 | Greasing of bearing |
54 | IInd year |
55 | IV th year |
56 | Painting on Steel surfaces Providing and applying two coats of readymix paint includind primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and Technical Specification Clause 1701. |
57 | III rd year |
58 | White washing of parapet walls of CD work and tree truncks including preparation of surface by cleaning scrapping etc. as per MORD Specification for Rural Roads 2014 |
59 | Ist year |
60 | IInd year |
61 | III rd year |
62 | IV th year |
63 | V th year |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail