61 / 22 Vattavila Stthomas Palli Road Re Tarring Project No 61 / 22 Vattavila St Thomas Palli Road Retarring
Tender Value
16.58 Lakhs
Estimated cost
Bid Submission
24 Nov 2021
0 days left
EMD
8720
Bank guarantee accepted
Document Fee
1170
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ELAKAMON → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
61 / 22 Vattavila Stthomas Palli Road Re Tarring Project No 61 / 22 Vattavila St Thomas Palli Road Retarring
BOQ
| Sl. No. | Item Description |
| 1 | Road improvement |
| 2 | 5.5.A.1a : Modified Penetration Macadam 50 mm thick using Bitumen S-65 Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. |
| 3 | 5.2.1a : Tack Coat Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. |
| 4 | 5.9.1.2a : 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder - Bitumen S-65 Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. Case - I ByManual Means (II) Bitumen (S-65) |
| 5 | 5.12.A.3.2a : Seal Coat - Manual Means - Type C - Bitumen S-65 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 A. By Manual Means :- Case - III :Type C (II) Bitumen (S-65) |
| 6 | od1195879/2021_2022 : Surface dressing of the ground including removing vegetation and in - equalities not exceeding 15 cm deep and disposal of rubbish , lead up to 50 m and lift up o 1.5 mAll kinds of soil |
| 7 | 75.8.1.1.A : Providing Plain cement concrete for wearing coat CC 1:2:4 (1 cement: 2 fine aggregate:4 course aggregate) laid to required slope as required including compaction, finishingand tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixedin concrete mixer etc complete as per specification (i) Nominal mix (1:2:4) |
| 8 | od1240013/2021_2022 : Supplyingand fixing information board 75 x 60 cm size using GI pipes as post andMS sheet surrounded by MS angles including painting lettering and fixing in position as pert direction of e-l--c(MoRD) |
AI Tender Summary
Tender Timeline
Nov 16, 2021
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2021
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 27, 2021
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender