}

Bids Are Invited For Surface Excavation - Surface Excavation N.Exc 30Cm Deep And Averaging 15Cm Deep And Getting Out In Soft/Loose Soil , Excavation - Excavation In Trenches N. Exc 1.5 M Wide And 1.5 M Depth, For Foundations, Etc Or For Shafts, Wells, Man-Delhi

Indian Army has published Bids Are Invited For Surface Excavation - Surface Excavation N.Exc 30Cm Deep And Averaging 15Cm Deep And Getting Out In Soft/Loose Soil , Excavation - Excavation In Trenches N. Exc 1.5 M Wide And 1.5 M Depth, For Foundations, Etc Or For Shafts, Wells, Man. Submission Date for this Tender is 19-11-2021. Tanks and Cylinders Tenders in Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

29913512
Bids Are Invited For Surface Excavation - Surface Excavation N.Exc 30Cm Deep And Averaging 15Cm Deep And Getting Out In Soft/Loose Soil , Excavation - Excavation In Trenches N. Exc 1.5 M Wide And 1.5 M Depth, For Foundations, Etc Or For Shafts, Wells, Man
Tender
Indian
Delhi
19-11-2021

Tender Details

Bids Are Invited For Surface Excavation - Surface Excavation N.Exc 30Cm Deep And Averaging 15Cm Deep And Getting Out In Soft/Loose Soil , Excavation - Excavation In Trenches N. Exc 1.5 M Wide And 1.5 M Depth, For Foundations, Etc Or For Shafts, Wells, Manholes, Pier Holesor Similar Items N.Exc 10 Sqm On Plan And N.Exc 1.5 M In Depth And Getting Out In Soft/Loosecomplete All As Specified And As Directed By The Engr-In-Charge , Cement Concrete - M&L Cement Concrete 1:4:8 Type D-2(Using 40Mm Graded Stone Aggregate)As In Foundation , Filling And Mass Concrete Complete All As Specified And As Directed By The Engr-In-Charge , Brick Work - M & L Brick Work With Sub Class B Bricks, Straight Or Curved On Plan Exc 6 M Mean Radius Built In Cm 1 : 6 Completeall As Specified And As Directed By Engr-In-Charge. , Damp Proof Course - M&L For Damp Proof Course In Cement Concrete 1:2:4, Type B-0 40Mm Thick To Horizontal Or Vertical Surfaces Including Necessary Formwork Complete All As Specified And As Directed By Engr-In-Charge , Rendering - M & L Rendering 15 Mm Thick In Cm 1:4 On Fair Faces Of Brick Work Or Concrete Surfaces, Finishing Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By The Engr-In-Charge , Rendering_2 - M & L Rendering 15 Mm Thick In Cm 1:5 On Fair Faces Of Brick Work Or Concrete Surfaces, Finishing Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By The Engr-In-Charge , Returning, Filling - Returning, Filling In, Incl Spreading,Levelling, Watering And Well Ramming In Layers N. Exc 25 Cm.In Soft/Loose Soil , Hard Core - M&L Hardcore Of Gauge .Exc 63Mm, Deposited, Spread And Levelled In Layers N.Exc 15Cm Thick, Watered And Rammed To A True Surface In Broken Stones Or Boulders All As Specified And As Directed By Engr-In-Charge , Cement Concrete_1 - M&L 75Mm Thick Cement Concrete Type-C-2 1:3:6 (40Mm Graded Aggregate) An In Sub Base All As Specified And As Directed By Engr-In-Charge , Cement Concrete_2 - M&L Pcc Type B1 1:2:4 (20Mm Graded Aggregate) 30Mm Thick As In Floor Finished Surfaces Fair And Even To Receive Tile All As Specified And As Directed By Engr-In-Charge , Removal Soil - Removal Of Surplus Soil N.Exc 50M And Depositing Where Directed At A Level N.Exc 1.5M Above The Starting Point Complete All As Specified And As Directed By The Engr-In-Charge , Non Skid Tiles - M&L Joint Free Non Skid Colour Ceramic Tiles 7 To 8Mm Thick (Square/ Rectangular) Area Of Each Tiles Exc 0.11 And N.Exc 0.18 Sqm In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match All As Specified And As Directed By Engr-In-Charge , Galzed Tiles - M&L Glazed Colour Ceramic Tiles In Vertical Surface 300Mm X 200Mm X 7Mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match All As Specified And As Directed By Engr-In-Charge , Screed Bed - M&L Screed Bed Or Bedding Layer Of Cement Mortar 15Mm Thick In Cm 1:6 For Laying Floor Finishes To Receive Tiles All As Specified And As Directed By Engr-In-Charge , Rendering_1 - M&L 15Mm Thick Screeding Rendering In Cm 1:4 All As Specified And As Directed By Engr-In-Charge , Pcc 1:3:6 - M&L Pcc 1:3:6 Type C2 Using 40 Mm Grade Aggregate 75 Mm Thick As In Plinth Protection / Paving Finished Fair And Even , Pvc Frame - S&F Pvc Solid Door Frame Of Size 50Mm X 47Mm Mode Out Of 5Mm Plain Colour Pvc Sheet Reinforced With Ms Square Tube. , Pvc_Door - S&F Factory Made Solid Panel Pvc Door Shutter ,30Mm Thick (Style) Consisting Of Frame Made Out Of Ms Tubes For Top & Bottom Rails, Ms Frames Shall Be Covered With Heat Moulded Plain Colour Pvc `C’ Channel Having A Pvc Sheet Strip Of 20Mm Width Stuck Inside With Solvent Cement For Stiles And Plaincolour Pvc Sheet For Top Rail, Lock Rail And Bottom Rail On Either Side And As Gap Insert Or Top & Bottom Rail, Paneling Of Plain Colour Pvc Sheet To Be Fittedin The Ms Frame Welded/Sealed To The Styles And Rails With Suitable Pvc Sheet Beading And Jointed Together With Solvent Cement, Supplying And Fixing In The Frame At Site All As Specified. , Tower Bolt_1 - S&F 150Mm Aluminium, Anodised, Barrel Tower Bolts Of Extruded Section And Fixed , Handle - S&F Extruded Aluminium Alloy Handle Of Size 100Mm, Fabricated Type, Anodised , Butt Hindges_1 - S&F Stainless Steel Butt Hinges 100Mm Size All As Directed. , Tower Bolt_2 - S&F 20Mm Mild Steel Barrel Tower Bolt Store Enamelled With Bright Bolts Of Long , Butt Hindges_2 - S&F 100Mm Mild Steel Butt Hinges Medium Weight , Cold Rolled Size Of Hinges , Liding Door Bolt - S&F 300Mm Mild Steel Sliding Door Bolts, Plate Type, Stove Enamelled Black, With Bright Bolt Not Less Than 12Mm Dia With And Including A Minimum Of 6 Bolts And Nuts, Four On Bolt Plate And Two On Staple Plate And Fixed , Glass_3Mm - S & F 3Mm Thick Glass Pan Ordinary Quality And Glazing With Oil Putty In Square Not Exc 0.5 Sqm Each Pane. , Bands - S&F Fi As In Bands, Straps, Hold Fast, Twist Clamp, Two Way Or Three Way Strap And Similar Articles Conforming To Fe 310-0 Or Fe 410-0. , Brackets - Small Fittings Such As Brackets Of Any Type, Latch And Hinge Blocks, Shaped Door And Window Stops And The Like Including All Necessary Labours, Articles N Exc 200 Cucm Each In 2Nd Class Hard Wood , Tarring - M&L Tarring Back Of Chowkats Etc Are Tarred Exc 0.1 Sqm But Not Exc 0.5 Sqm Each. , Ventilators - S&F Steel Ventilators With Top Hung Shutter Including Hinges, Steel Peg Stay Of Size 450 X 3000 Mm Complete All As Specified And As Directed By Engr-In-Charge , Synthetic Paint - M&L 2 Coats Of Synthetic Enemel Painting To Steel Or Iron Based Material Surfaces Of Any Description, Not Otherwise Described Over 10Cm Width Or Girth Over Pink Primer Incl Preparation Of New Surfaces. , Gi Tubes_25 Mm - S&F Gi Tubes Medium Grade With All Fitting And Fixed Complete To Walls And Ceiling Or Laid In Floor In Following Bore Of Tube :- (A) 25Mm , Gi Tubes_15 Mm - (B) 15Mm , Gi Tubes_20 Mm - (C) 20Mm , Cutting Chases - Cutting Chases, Pinning In, Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels Etc And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Writing Etc And Making Good, Cutting Not Exc 10Cm Girth , Water Closet - M&L Vitreous China Squatting Pan, Orissa Pattern, Size 580X440mm White, With Integral Foot Rests (Excluding Flushing Cistern And Flush Pipe) In Repair , Cistern - S&F 10 Ltrs Capacity Pvc Valveless, Symphonicaction Type, Flusing Cistern, Low Level, White, With Inlet Ball Valve, Float And Handle Including Brackets , Wash Hand Basin - S&F Vitreous China Wash Hand Basin White Flat Back Of Size 550X400mm Excluding Taps Waste, Chain And Plug But Including Bracketsand Pedestal All As Specified And As Directed By Engr-In-Charge , Looking Mirror - S&F 600X450mm Bevelled Edge Mirror Of Selected Mirror Of Selected Quality Glass, Mounted On 6Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass And Cup Washers All As Specified And As Directed By Engr-In-Charge , Glass Assembly - S&F In Repairs Sheet Glass Shelf Assembly Consting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guardand Railing 60Cm Long , Pillar Tap - S&F 15Mm Bore Pillar Taps Cast Copper Ally, With Capstain Head, Fancy Type, Chromium Plated, Screwed Down High Pressure, With Or Without Lettered Hot Or Cold With Long Screwed Shanks And Flynuts, Screwed For Iron Pipe And Fiixed In Repair , Urinal - M&L In Repair Vitreous China Urinal, Full Stall Type, White (Excluding Flushing Cistern, Flush Pipe And Waste Pipe Complete Including Providing And Fixingplugs, Bedding Urinal Against Wall In Cement Mortar 1:2, Securing Urinal Toplug With And Including 60Mm Long Brass Screws, Pointing Around Urinal Back In Cement, Fixing Automatic Flushing Cistern With Brackets, Flush Pipe Grating And Union For Discharge Pipe Complete All As Specified And As Directed By Engr-In-Charge , Urinal_Partition - M&L For In Repairs Vitreous China Urinal Partition White Of Size 310X700mm All As Specified And As Directed By Engr-In-Charge , Bottle Trap - S&F (In Repairs) Cp Bottle Trap 32 Mm Including Connection To Floor Trap Complete All As Specified & Directed By Engr-In-Charge. (Make : Parko Cat No – 1597 Or Equivalent Make In Jaquar/Zim). , Bib Taps - S&F 15Mm Cast Copper Alloy, Chromium Platedbib Taps Fancy Type With Crutch Or Butterfly Handle, Screwed For Iron Pipe Or For Brass Pipe Of For Ferrule And Fixed In Repair , Stop Vavlve - S&F 15Mm Stop Valve,Fancy Type, Chromium Plated With Long Shunk And Cup (Cncealed Type) High Pressure, With Crutch Or Butterfly Handle, Screwed Both Ends For Iron Pipe Or For Union And Fixed In Repair , Pvc Connection - Pvc Connection Pipe 15Mm Size With Ptmt Nut Of Length 450Mm , Grating - S&F Grating Doom 125Mm Dia With Waste Hole Of Ptmt , Soap Dish - S&F (In Repairs) Cp Soap Dishcomplete All As Specified & Directed By Engr-In-Charge. (Make : Parko Cat No – 1552Or Equivalent Make In Jaquar/Zim). , Water Tank - Hoisting And Fixing Rotational Moulded Polyehtylene Water Storage Tank Of 1000 Ltrs Capacity (Cylindrical Vertical With Closedtop) In Position All As Specified In Ssr Part-I , Vavles - S&F 20Mm Bore Ball Valves, High Pressure, With Polythene Float And Flynut Complete, Screwed For Iron Pipe Or Brass Ferrule And Fixed In Repair , Vent Pipes - S&F Cast Iron(Isi Marked) Soil Spun Pipes Waste And Vent Pipes In Any Lenth With Or Without Ears, Jointed With Lead Joints, Fixed To Wall Or Laid In Trenches / In Floors (Bore Of Pipe 150 Mm). , Ci Bents - S&F 100 Mm Ci Bends (Isi Marked) (Any Radius), Diminishing Pieces Or Tapers Of Any Description Complete All As Directed By Engr-In-Charge. , Branch Pipe - S&F 100 Mm Branch Piece, Single (Equal Or Unqual) Ordinary Or Inverted (Spigot Or Socketed Type Or With Parrel Branches Complete All As Directed By Engr-In-Charge. , Cowl - S&F 100 Mm Ci Cowl Complete All As Directed By Engr-In-Charge. , Oil Bound Distemper - Preparation Of Newly Plastered Surfaces Of Walls And Applying Two Coat Of Oil Bound Disemper Over A Layer Of Wall Care Putty (Birla/Jk White Putty) To Obtained Smooth Finish Complete All As Specified & Directed By Engr-In-Charge. , Vement Base Paint - M&L For Preparation Of New Plastered Surfaces Of Walls Surfacesand Applyingtwo Coats Cement Based Paint Complete Allas Specified And Directed By Engr In Charge. , Glass_Windows - M&L Fixinng 12 Mm Thick Toughened Glass ( Modiguard,Sain Gobain Or Equivalent Type) For Open Type Windows Fixed Inintermediate Bay Of Rcc Verical Grids Including Cost Of Fixing Arrangements Like Stainless Steel Hasp,Screws,And All Fixtures Providing Stained /Colour Stickerall As Per Direction Of Engineer- In-Charge , Glass_Partition - M&L Fixinng 12 Mm Thick Toughened Glass( Modiguard,Sain Gobain Or Equivalent Type) Partitionincluding Cost Of Fixing Arrangements Like Stainless Steel Channeld,Bolts Etc Metal Channel And Bolts Etc Andproviding Colour Stickerall As Per Direction Of Engineer- In-Charge Total Quantity : 1

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail