Public Administrative Department Government Departments Closing in 0 days TDR #29911475

Bids Are Invited For Centre Drill As Per Sl. No. 1 Of Annexure I - Bs 4 , Hss Twist Drill Straight Shank As Per Sl. No. 2.1 Of Annexure I - Ø 3 , Hss Twist Drill Straight Shank As Per Sl. No. 2.2 Of Annexure I - Ø 4 , Hss Twist Drill Straight Shank As Per

Issued by Government Departments · , Assam
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Dec 2021
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Organization
Click here to view tendering authority
Tender ID
Click here to view tender id
Competition Type
NCB
Bidding Type
Tender
Location / State
→ Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Click here to view website
Contact Person
Click here to view contact person
Address
Click here to view address

Project Description

Bids Are Invited For Centre Drill As Per Sl. No. 1 Of Annexure I - Bs 4 , Hss Twist Drill Straight Shank As Per Sl. No. 2.1 Of Annexure I - Ø 3 , Hss Twist Drill Straight Shank As Per Sl. No. 2.2 Of Annexure I - Ø 4 , Hss Twist Drill Straight Shank As Per Sl. No. 2.3 Of Annexure I - Ø 5 , Hss Twist Drill Straight Shank As Per Sl. No. 2.4 Of Annexure I - Ø 6 , Hss Twist Drill Straight Shank As Per Sl. No. 2.5 Of Annexure I - Ø 7 , Hss Twist Drill Straight Shank As Per Sl. No. 2.6 Of Annexure I - Ø 8 , Hss Twist Drill Straight Shank As Per Sl. No. 2.7 Of Annexure I - Ø 9 , Hss Twist Drill Straight Shank As Per Sl. No. 2.8 Of Annexure I - Ø 10 , Hss Twist Drill Straight Shank As Per Sl. No. 2.9 Of Annexure I - Ø 11 , Hss Twist Drill Straight Shank As Per Sl. No. 2.10 Of Annexure I - Ø 12 , Hss Twist Drill Sl. No. 3.1 Of Annexure I - Ø 13 , Hss Twist Drill Sl. No. 3.2 Of Annexure I - Ø 14 , Hss Twist Drill Sl. No. 3.3 Of Annexure I - Ø 15 , Grinding Wheel As Per Sl. No. 4 As Per Annexure I - Ø 100 Mm X 6 Mm X Ø 16 Mm , Electrode As Per Sl. No. 5.1 Of Annexure I - Ø 2.5 Mm, Length= 300 Mm , Electrode As Per Sl. No. 5.2 Of Annexure I - Ø 3.15 Mm, Length= 300 Mm , Half Round File (Rough) With Handle As Per Sl. No. 6 Of Annexure I - 250 Mm , Half Round File (Rough) With Handle As Per Sl. No. 7 Of Annexure I - 150 Mm , Half Round File (Smooth) With Handle As Per Sl. No. 8 Of Annexure I - 250 Mm , Half Round File (Smooth) With Handle As Per Sl. No. 9 Of Annexure I - 150 Mm , Half Round File (Second Cut) With Handle As Per Sl. No. 10Of Annexure I - 250 Mm , Half Round File (Second Cut) With Handle As Per Sl. No. 11 Of Annexure I - 150 Mm , Round File (Bastard Cut) With Handleas Per Sl. No. 12 Of Annexure I - 250 Mm , Round File (Smooth) With Handle As Per Sl. No. 13 Of Annexure I - 250 Mm , Round File (Smooth) With Handle As Per Sl. No. 14 Of Annexure I - 150 Mm , Round File (Second Cut) With Handle As Per Sl. No. 15 Of Annexure I - 250 Mm , Round File (Second Cut) With Handleas Per Sl. No. 16 Of Annexure I - 150 Mm , Square File (Buster) With Handle As Per Sl. No. 17 Of Annexure I - 250 Mm , Square File (Buster) With Handle As Per Sl. No. 18 Of Annexure I - 150 Mm , Square File (Smooth) With Handle As Per Sl. No. 19 Of Annexure I - 250 Mm , Square File (Smooth) With Handle As Per Sl. No. 20 Of Annexure I - 150 Mm , Square File (Secondcut) With Handle As Per Sl. No. 21 Of Annexure I - 250 Mm , Square File (Second Cut) With Handle As Per Sl. No. 22 Of Annexure I - 150 Mm , Flat File (Buster) With Handle As Per Sl. No. 23 Of Annexure I - 250 Mm , Flat File (Buster) With Handle As Per Sl. No. 24 Of Annexure I - 150 Mm , Flat File (Smooth) With Handle As Per Sl. No. 25 Of Annexure I - 250 Mm , Flat File (Smooth) With Handle As Per Sl. No. 26 Of Annexure I - 150 Mm , Flat File (Second Cut) With Handle As Per Sl. No. 27 Of Annexure I - 250 Mm , Flat File (Second Cut) With Handle As Per Sl. No. 28 Of Annexure I - 150 Mm , Triangular File (Buster) With Handle As Per Sl. No. 29 Of Annexure I - 250 Mm , Triangular File (Buster) With Handle As Per Sl. No. 30 Of Annexure I - 150 Mm , Triangular File (Smooth) With Handle As Per Sl. No. 31 Of Annexure I - 250 Mm , Triangular File (Smooth) With Handle As Per Sl. No. 32 Of Annexure I - 150 Mm , Triangular File (Second Cut) With Handle As Per Sl. No. 33 Of Annexure I - 250 Mm , Triangular File (Second Cut) With Handle As Per Sl. No. 34 Of Annexure I - 150 Mm , Needle File Set As Per Sl. No. 35 Of Annexure I - 100 Mm , Ball Peen Hammer As Per Sl. No. 36 Of Annexure I - ½ Kg , Ball Peen Hammer As Per Sl. No. 37 Of Annexure I - 1 Kg , Ball Peen Hammeras Per Sl. No. 38 Of Annexure I - 3 Kg , Ball Peen Hammeras Per Sl. No. 39 Of Annexure I - 5 Kg , Claw Hammer As Per Sl. No. 40 Of Annexure I - 1 Kg , Soft Hammeras Per Sl. No. 41 Of Annexure I - ½ Kg , Cross Peen Hammeras Per Sl. No. 42 Of Annexure I - 1 Kg , Adjustable Spanner As Per Sl. No. 43 Of Annexure I - Open Up To 75 Mm , Double Open Ended Spanner As Per Sl. No. 44 Of Annexure I - 6-32 Mm, 6/7 To 30/32 , Ring Spanner As Per Sl. No. 45 Of Annexure I - 6/7 Mm To 30/32 , Swage Block As Per Sl. No. 46 Of Annexure I - 450 X 450 Mm (Cast Iron) , Anvil As Per Sl. No. 47 Of Annexure I - 25 Kg , Allen Key As Per Sl. No. 48 Of Annexure I - Allen Key Wrench (Hexagon) Set 2 Mm To 18 Mm , Allen Key As Per Sl. No. 49 Of Annexure I - 3/32” To 3/8” , Cutting Plier As Per Sl. No. 50 Of Annexure I - 6” , Nose Plier As Per Sl. No. 51 Of Annexure I - 6” , Combination Plier As Per Sl. No. 52 Of Annexure I - 8” , C Clamp As Per Sl. No. 53 Of Annexure I - Clamping Capacity=2” To 8” , Number Punch As Per Sl. No. 54 Of Annexure I - 0-9 , Letter Punch As Per Sl. No. 55 Of Annexure I - A-Z (Capital) , Cold Chisel As Per Sl. No. 56 Of Annexure I - Length-125 Mm, Cutting Edge- 10 Mm , Tongs As Per Sl. No. 57.1 Of Annexure I - Length= 250Mm , Tongsas Per Sl. No. 57.2 Of Annexure I - Length= 300 Mm , Scriber As Per Sl. No. 58 Of Annexure I - Length= 200 Mm , Ø 6 Mm , Centre Punch As Per Sl. No. 59 Of Annexure I - 6 Inches And Ø 10 Mm , Screw Driver As Per Sl. No. 60 Of Annexure I - Size Length- 200 Mm , Steel Rule As Per Sl. No. 61 Of Annexure I - 300 Mm, Both Metric & British Graduation System , Try Square As Per Sl. No. 62 Of Annexure I - Blade Length 250 Mm,Tongue Length-120 Mm , Angle Protector As Per Sl. No. 63 Of Annexure I - 200 Mm , Hacksaw Frame Adjustable As Per Sl. No. 64 Of Annexure I - 250 To 300 Mm , Hss Hacksaw Blade As Per Sl. No. 65 Of Annexure I - 300 X 12.5 X 0.63 Mm , Welding Helmet As Per Sl. No. 66 Of Annexure I - Auto Dark Made Of Abs Plastic Auto Darkening (Multipurpose) , Welding Helmet (Head Shield) As Per Sl. No. 67 Of Annexure I - Full Face With Black & White Glass , Grinding Helmet As Per Sl. No. 68 Of Annexure I - Clear Glass , Safety Helmet As Per Sl. No. 69 Of Annexure I - Brown , Safety Helmet As Per Sl. No. 70 Of Annexure I - White , Magnifying Glass As Per Sl. No. 71 Of Annexure I - 5 X Magnification Ø 70 Mm , Respirator As Per Sl. No. 72 Of Annexure I - Half Mask, Air Purifying, Respiration, Air Mount , Leather Apron As Per Sl. No. 73 Of Annexure I - Material- Leather 100%, Length-Std. , Protective White Googles For Grinding As Per Sl. No. 74 Of Annexure I - Impact Resistant Duralite Polycarbonate Construction. Regular Size: Fits Over Most Prescription Eye Glass Frames. , Hand Shield As Per Sl. No. 75 Of Annexure I - Welding Purpose With Black & White Glass , Measuring Tape As Per Sl. No. 76.1 Of Annexure I - 5 Meter , Measuring Tape As Per Sl. No. 76.2 Of Annexure I - 15 Meter , Neon Tester As Per Sl. No. 77 Of Annexure I - 500 Volt , Tong Tester As Per Sl. No. 78 Of Annexure I - Up To 200 Amps , Multimeter As Per Sl. No. 79 Of Annexure I - Up To 600 Volt , Welding Gauge As Per Sl. No. 80 Of Annexure I - Standard , Vernier Caliper As Per Sl. No. 81 Of Annexure I - 150 Mm , Inside Caliper As Per Sl. No. 82 Of Annexure I - 150 Mm , Outside Caliper As Per Sl. No. 83 Of Annexure I - 150 Mm , Hose Pipe For Oxy-Acetylene Gas Welding As Per Sl. No. 84.1 Of Annexure I - Maroon , Hose Pipe For Oxy-Acetylene Gas Welding As Per Sl. No. 84.2 Of Annexure I - Blue , Hose Clamp As Per Sl. No. 85 Of Annexure I - Suitable To Above Hose Pipe For Oxy-Acetylene Gas Welding , Non Consumable Filler Rod As Per Sl. No. 86 Of Annexure I - Tungsten Ø2.4 M, Colour Code: Red , Fire Extinguisher As Per Sl. No. 87 Of Annexure I - Abc Type , Fire Extinguisher As Per Sl. No. 88 Of Annexure I - Co2 , Fire Extinguisher As Per Sl. No. 89 Of Annexure I - Mechanical Form , Pipe Vice As Per Sl. No. 90 Of Annexure I - 100 Mm , Wire Gauge As Per Sl. No. 91 Of Annexure I - Swg , ‘V’ Block As Per Sl. No. 92 Of Annexure I - Size- Square 2.2 Inch , Gas Welding Torch With Nozzle As Per Sl. No. 93.1 Of Annexure I - Ooo , Gas Welding Torch With Nozzle As Per Sl. No. 93.2 Of Annexure I - Oo , Gas Welding Torch With Nozzle As Per Sl. No. 93.3 Of Annexure I - O , Gas Welding Torch With Nozzle As Per Sl. No. 93.4 Of Annexure I - 1 , Gas Welding Torch With Nozzle As Per Sl. No. 93.5 Of Annexure I - 2 , Gas Welding Torch With Nozzle As Per Sl. No. 93.6 Of Annexure I - 3 , Gas Welding Torch With Nozzle As Per Sl. No. 93.7 Of Annexure I - 4 , Gas Welding Torch With Nozzle As Per Sl. No. 93.8 Of Annexure I - 5 , Gas Welding Torch With Nozzle As Per Sl. No. 93.9 Of Annexure I - 6 , Gas Welding Torch With Nozzle As Per Sl. No. 93.10 Of Annexure I - 7 , Welding Gas Lighter As Per Sl. No. 94 Of Annexure I - Standard , Hand Angle Grinder Wheel As Per Sl. No. 95 Of Annexure I - Ø 100 X 6 X 16 Mm , Hand Angle Grinder Wheel As Per Sl. No. 96 Of Annexure I - Ø 180 X 606 X 22.23 Mm , Hand Angle Grinder Cutting Wheel As Per Sl. No. 97 Of Annexure I - Ø 105 X 102 X 16 Mm , Pipe Cutting Machine Wheel As Per Sl. No. 98 Of Annexure I - Ø 355 X 2.8 X 25.4 Mm , Hammer Type Drill Bit As Per Sl. No. 99.1 Of Annexure I - 5 Mm , Hammer Type Drill Bit As Per Sl. No. 99.2 Of Annexure I - 15 Mm , Leather Welding Jacket As Per Sl. No. 100 Of Annexure I - Common Size (42/44) , Safety Hand Gloves As Per Sl. No. 101 Of Annexure I - Leather , Leather Spats As Per Sl. No. 102 Of Annexure I - Length- Std. , Leather Hood As Per Sl. No. 103 Of Annexure I - Material- Leather 100 % , Wire Brush As Per Sl. No. 104 Of Annexure I - 6” To 10” , Welding Glass As Per Sl. No. 105 Of Annexure I - Dark , Safety Goggles As Per Sl. No. 106 Of Annexure I - White , Leather Arm Sleeve As Per Sl. No. 107 Of Annexure I - Material- Leather 100% , Ccms Filler Rod As Per Sl. No. 108 Of Annexure I - Ø 2.4 Mm , Oxy-Acetylene Gas Cutting Nozzle As Per Sl. No. 109.1 Of Annexure I - 1/32 , Oxy-Acetylene Gas Cutting Nozzleas Per Sl. No. 109.2 Of Annexure I - 3/64’’ , Oxy-Acetylene Gas Cutting Nozzle As Per Sl. No. 109.3 Of Annexure I - 1/16’’ , Oxy-Acetylene Gas Cutting Nozzle As Per Sl. No. 109.4 Of Annexure I - 5/64’’ , Oxy-Acetylene Gas Cutting Nozzle As Per Sl. No. 109.5 Of Annexure I - 3/32’’ , Oxy-Acetylene Gas Cutting Nozzle As Per Sl. No. 109.6 Of Annexure I - 7/94’’ , Oxy-Acetylene Gas Cutting Nozzle As Per Sl. No. 109.7 Of Annexure I - 1/8’’ , Oxy- Acetylene Gas Cutting Torch As Per Sl. No. 110 Of Annexure I - Suitable For Above Oxy-Acetylene Gas Cutting Nozzle , Flow Meter For Argon As Per Sl. No. 111 Of Annexure I - 20 Bar , Flow Meter For Co2 As Per Sl. No. 112 Of Annexure I - 21 Bar , Hose Clamp For 3/4 As Per Sl. No. 113 Of Annexure I - Standard , Torch Tip Cleaner As Per Sl. No. 114 Of Annexure I - Standard , Double Stage Regulator For Acetylene As Per Sl. No. 115 Of Annexure I - Standard , Double Stage Regulator For Argon As Per Sl. No. 116 Of Annexure I - Standard , Double Stage Regulator For Oxygen As Per Sl. No. 117 Of Annexure I - Standard , Double Stage Regulator & Heater For Co2 As Per Sl. No. 118 Of Annexure I - Standard , Argon Gas Cylinder As Per Sl. No. 119 Of Annexure I - 7 Cum , Oxygen Gas Cylinder As Per Sl. No. 120 Of Annexure I - 7 Cum , Acetylene Gas Cylinder As Per Sl. No. 121 Of Annexure I - 4.7 Cum , Co2 Gas Cylinder As Per Sl. No. 122 Of Annexure I - 31 Kg , Insulation Tape As Per Sl. No. 123 Of Annexure I - Standard , Ear Plug As Per Sl. No. 124 Of Annexure I - Standard , Chipping Hammer Per As Sl. No. 125 Of Annexure I - 100 Gram Total Quantity : 1

BOQ

Sl. No. Item TitleItem Description
1Centre Drill as per Sl. No. 1 of annexure IBS 4
2HSS Twist Drill Straight Shank as per Sl. No. 2.1 of annexure IØ 3
3HSS Twist Drill Straight Shank as per Sl. No. 2.2 of annexure IØ 4
4HSS Twist Drill Straight Shank as per Sl. No. 2.3 of annexure IØ 5
5HSS Twist Drill Straight Shank as per Sl. No. 2.4 of annexure IØ 6
6HSS Twist Drill Straight Shank as per Sl. No. 2.5 of annexure IØ 7
7HSS Twist Drill Straight Shank as per Sl. No. 2.6 of annexure IØ 8
8HSS Twist Drill Straight Shank as per Sl. No. 2.7 of annexure IØ 9
9HSS Twist Drill Straight Shank as per Sl. No. 2.8 of annexure IØ 10
10HSS Twist Drill Straight Shank as per Sl. No. 2.9 of annexure IØ 11
11HSS Twist Drill Straight Shank as per Sl. No. 2.10 of annexure IØ 12
12HSS Twist Drill Sl. No. 3.1 of annexure IØ 13
13HSS Twist Drill Sl. No. 3.2 of annexure IØ 14
14HSS Twist Drill Sl. No. 3.3 of annexure IØ 15
15Grinding Wheel as per Sl. No. 4 as per annexure IØ 100 mm x 6 mm x Ø 16 mm
16Electrode as per Sl. No. 5.1 of annexure IØ 2.5 mm, Length= 300 mm
17Electrode as per Sl. No. 5.2 of annexure IØ 3.15 mm, Length= 300 mm
18Half Round File (Rough) with Handle as per Sl. No. 6 of annexure I250 mm
19Half Round File (Rough) with Handle as per Sl. No. 7 of annexure I150 mm
20Half Round File (Smooth) with Handle as per Sl. No. 8 of annexure I250 mm
21Half Round File (Smooth) with Handle as per Sl. No. 9 of annexure I150 mm
22Half Round File (Second Cut) with Handle as per Sl. No. 10of annexure I250 mm
23Half Round File (Second Cut) with Handle as per Sl. No. 11 of annexure I150 mm
24Round File (Bastard Cut) with Handleas per Sl. No. 12 of annexure I250 mm
25Round File (Smooth) with Handle as per Sl. No. 13 of annexure I250 mm
26Round File (Smooth) with Handle as per Sl. No. 14 of annexure I150 mm
27Round File (Second Cut) with Handle as per Sl. No. 15 of annexure I250 mm
28Round File (Second Cut) with Handleas per Sl. No. 16 of annexure I150 mm
29Square File (Buster) with Handle as per Sl. No. 17 of annexure I250 mm
30Square File (Buster) with Handle as per Sl. No. 18 of annexure I150 mm
31Square File (Smooth) with Handle as per Sl. No. 19 of annexure I250 mm
32Square File (Smooth) with Handle as per Sl. No. 20 of annexure I150 mm
33Square File (SecondCut) with Handle as per Sl. No. 21 of annexure I250 mm
34Square File (Second Cut) with Handle as per Sl. No. 22 of annexure I150 mm
35Flat File (Buster) with Handle as per Sl. No. 23 of annexure I250 mm
36Flat File (Buster) with Handle as per Sl. No. 24 of annexure I150 mm
37Flat File (Smooth) with Handle as per Sl. No. 25 of annexure I250 mm
38Flat File (Smooth) with Handle as per Sl. No. 26 of annexure I150 mm
39Flat File (Second Cut) with Handle as per Sl. No. 27 of annexure I250 mm
40Flat File (Second Cut) with Handle as per Sl. No. 28 of annexure I150 mm
41Triangular File (Buster) with Handle as per Sl. No. 29 of annexure I250 mm
42Triangular File (Buster) with Handle as per Sl. No. 30 of annexure I150 mm
43Triangular File (Smooth) with Handle as per Sl. No. 31 of annexure I250 mm
44Triangular File (Smooth) with Handle as per Sl. No. 32 of annexure I150 mm
45Triangular File (Second Cut) with Handle as per Sl. No. 33 of annexure I250 mm
46Triangular File (Second Cut) with Handle as per Sl. No. 34 of annexure I150 mm
47Needle File Set as per Sl. No. 35 of annexure I100 mm
48Ball Peen Hammer as per Sl. No. 36 of annexure I½ Kg
49Ball Peen Hammer as per Sl. No. 37 of annexure I1 Kg
50Ball Peen Hammeras per Sl. No. 38 of annexure I3 Kg
51Ball Peen Hammeras per Sl. No. 39 of annexure I5 Kg
52Claw Hammer as per Sl. No. 40 of annexure I1 Kg
53Soft Hammeras per Sl. No. 41 of annexure I½ Kg
54Cross Peen Hammeras per Sl. No. 42 of annexure I1 Kg
55Adjustable Spanner as per Sl. No. 43 of annexure IOpen up to 75 mm
56Double open ended spanner as per Sl. No. 44 of annexure I6-32 mm, 6/7 to 30/32
57Ring spanner as per Sl. No. 45 of annexure I6/7 mm to 30/32
58Swage Block as per Sl. No. 46 of annexure I450 x 450 mm (Cast Iron)
59Anvil as per Sl. No. 47 of annexure I25 kg
60Allen Key as per Sl. No. 48 of annexure IAllen key wrench (Hexagon) Set 2 mm to 18 mm
61Allen Key as per Sl. No. 49 of annexure I3/32” to 3/8”
62Cutting Plier as per Sl. No. 50 of annexure I6”
63Nose plier as per Sl. No. 51 of annexure I6”
64Combination Plier as per Sl. No. 52 of annexure I8”
65C clamp as per Sl. No. 53 of annexure IClamping capacity=2” to 8”
66Number Punch as per Sl. No. 54 of annexure I0-9
67Letter Punch as per Sl. No. 55 of annexure IA-Z (Capital)
68Cold Chisel as per Sl. No. 56 of annexure ILength-125 mm, Cutting edge- 10 mm
69Tongs as per Sl. No. 57.1 of annexure ILength= 250mm
70Tongsas per Sl. No. 57.2 of annexure ILength= 300 mm
71Scriber as per Sl. No. 58 of annexure ILength= 200 mm , Ø 6 mm
72Centre Punch as per Sl. No. 59 of annexure I6 inches and Ø 10 mm
73Screw Driver as per Sl. No. 60 of annexure ISize Length- 200 mm
74Steel Rule as per Sl. No. 61 of annexure I300 mm, Both metric & British graduation system
75Try Square as per Sl. No. 62 of annexure IBlade Length 250 mm,Tongue Length-120 mm
76Angle Protector as per Sl. No. 63 of annexure I200 mm
77Hacksaw frame Adjustable as per Sl. No. 64 of annexure I250 to 300 mm
78HSS Hacksaw Blade as per Sl. No. 65 of annexure I300 x 12.5 x 0.63 mm
79Welding helmet as per Sl. No. 66 of annexure IAuto Dark made of ABS plastic auto darkening (Multipurpose)
80Welding helmet (Head Shield) as per Sl. No. 67 of annexure IFull face with black & white glass
81Grinding Helmet as per Sl. No. 68 of annexure IClear glass
82Safety Helmet as per Sl. No. 69 of annexure IBrown
83Safety Helmet as per Sl. No. 70 of annexure IWhite
84Magnifying Glass as per Sl. No. 71 of annexure I5 x magnification Ø 70 mm
85Respirator as per Sl. No. 72 of annexure IHalf mask, air purifying, Respiration, air mount
86Leather apron as per Sl. No. 73 of annexure IMaterial- Leather 100%, Length-Std.
87Protective white googles for grinding as per Sl. No. 74 of annexure IImpact resistant duralite polycarbonate construction. Regular size: Fits over most prescription eye glass frames.
88Hand Shield as per Sl. No. 75 of annexure IWelding purpose with Black & White Glass
89Measuring Tape as per Sl. No. 76.1 of annexure I5 meter
90Measuring Tape as per Sl. No. 76.2 of annexure I15 meter
91Neon Tester as per Sl. No. 77 of annexure I500 volt
92Tong Tester as per Sl. No. 78 of annexure IUp to 200 amps
93Multimeter as per Sl. No. 79 of annexure IUp to 600 volt
94Welding gauge as per Sl. No. 80 of annexure IStandard
95Vernier Caliper as per Sl. No. 81 of annexure I150 mm
96Inside caliper as per Sl. No. 82 of annexure I150 mm
97Outside caliper as per Sl. No. 83 of annexure I150 mm
98Hose Pipe for Oxy-Acetylene Gas Welding as per Sl. No. 84.1 of annexure IMaroon
99Hose Pipe for Oxy-Acetylene Gas Welding as per Sl. No. 84.2 of annexure IBlue
100Hose Clamp as per Sl. No. 85 of annexure ISuitable to above Hose Pipe for Oxy-Acetylene Gas Welding
101Non Consumable Filler Rod as per Sl. No. 86 of annexure ITungsten Ø2.4 m, Colour Code: Red
102Fire Extinguisher as per Sl. No. 87 of annexure IABC type
103Fire Extinguisher as per Sl. No. 88 of annexure ICO2
104Fire Extinguisher as per Sl. No. 89 of annexure IMechanical Form
105Pipe Vice as per Sl. No. 90 of annexure I100 mm
106Wire Gauge as per Sl. No. 91 of annexure ISWG
107‘V’ Block as per Sl. No. 92 of annexure ISize- Square 2.2 inch
108Gas Welding torch with nozzle as per Sl. No. 93.1 of annexure Iooo
109Gas Welding torch with nozzle as per Sl. No. 93.2 of annexure Ioo
110Gas Welding torch with nozzle as per Sl. No. 93.3 of annexure Io
111Gas Welding torch with nozzle as per Sl. No. 93.4 of annexure I1
112Gas Welding torch with nozzle as per Sl. No. 93.5 of annexure I2
113Gas Welding torch with nozzle as per Sl. No. 93.6 of annexure I3
114Gas Welding torch with nozzle as per Sl. No. 93.7 of annexure I4
115Gas Welding torch with nozzle as per Sl. No. 93.8 of annexure I5
116Gas Welding torch with nozzle as per Sl. No. 93.9 of annexure I6
117Gas Welding torch with nozzle as per Sl. No. 93.10 of annexure I7
118Welding Gas Lighter as per Sl. No. 94 of annexure IStandard
119Hand Angle Grinder Wheel as per Sl. No. 95 of annexure IØ 100 x 6 x 16 mm
120Hand Angle Grinder Wheel as per Sl. No. 96 of annexure IØ 180 x 606 x 22.23 mm
121Hand Angle Grinder Cutting Wheel as per Sl. No. 97 of annexure IØ 105 x 102 x 16 mm
122Pipe Cutting Machine Wheel as per Sl. No. 98 of annexure IØ 355 x 2.8 x 25.4 mm
123Hammer type drill bit as per Sl. No. 99.1 of annexure I5 mm
124Hammer type drill bit as per Sl. No. 99.2 of annexure I15 mm
125Leather Welding Jacket as per Sl. No. 100 of annexure ICommon size (42/44)
126Safety hand gloves as per Sl. No. 101 of annexure ILeather
127Leather Spats as per Sl. No. 102 of annexure ILength- Std.
128Leather Hood as per Sl. No. 103 of annexure IMaterial- Leather 100 %
129Wire Brush as per Sl. No. 104 of annexure I6” to 10”
130Welding Glass as per Sl. No. 105 of annexure IDark
131Safety Goggles as per Sl. No. 106 of annexure IWhite
132Leather Arm sleeve as per Sl. No. 107 of annexure IMaterial- Leather 100%
133CCMS Filler Rod as per Sl. No. 108 of annexure IØ 2.4 mm
134Oxy-Acetylene Gas Cutting Nozzle as per Sl. No. 109.1 of annexure I1/32\"
135Oxy-Acetylene Gas Cutting Nozzleas per Sl. No. 109.2 of annexure I3/64’’
136Oxy-Acetylene Gas Cutting Nozzle as per Sl. No. 109.3 of annexure I1/16’’
137Oxy-Acetylene Gas Cutting Nozzle as per Sl. No. 109.4 of annexure I5/64’’
138Oxy-Acetylene Gas Cutting Nozzle as per Sl. No. 109.5 of annexure I3/32’’
139Oxy-Acetylene Gas Cutting Nozzle as per Sl. No. 109.6 of annexure I7/94’’
140Oxy-Acetylene Gas Cutting Nozzle as per Sl. No. 109.7 of annexure I1/8’’
141Oxy- Acetylene Gas Cutting Torch as per Sl. No. 110 of annexure ISuitable for above Oxy-Acetylene Gas Cutting Nozzle
142Flow meter for Argon as per Sl. No. 111 of annexure I20 Bar
143Flow meter for CO2 as per Sl. No. 112 of annexure I21 Bar
144Hose Clamp for 3/4 as per Sl. No. 113 of annexure IStandard
145Torch Tip Cleaner as per Sl. No. 114 of annexure IStandard
146Double stage regulator for Acetylene as per Sl. No. 115 of annexure IStandard
147Double stage regulator for Argon as per Sl. No. 116 of annexure IStandard
148Double stage regulator for Oxygen as per Sl. No. 117 of annexure IStandard
149Double stage regulator & heater for CO2 as per Sl. No. 118 of annexure IStandard
150Argon Gas Cylinder as per Sl. No. 119 of annexure I7 cum
151Oxygen Gas Cylinder as per Sl. No. 120 of annexure I7 cum
152Acetylene Gas Cylinder as per Sl. No. 121 of annexure I4.7 cum
153CO2 Gas Cylinder as per Sl. No. 122 of annexure I31 Kg
154Insulation Tape as per Sl. No. 123 of annexure IStandard
155Ear Plug as per Sl. No. 124 of annexure IStandard
156Chipping hammer per as Sl. No. 125 of annexure I100 Gram

AI Tender Summary

OUR REF NO 29911475
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 06-12-2021
Authority
Authority Name Ministry Of Micro Small And Meduim Enterprises
Work Description Bids Are Invited For Centre Drill As Per Sl. No. 1 Of Annexure I - Bs 4 , Hss Twist Drill Straight Shank As Per Sl. No. 2.1 Of Annexure I - Ø 3 , Hss Twist Drill Straight Shank As Per Sl. No. 2.2 Of Annexure I - Ø 4 , Hss Twist Drill Straight Shank As Per Sl. No. 2.3 Of Annexure I - Ø 5 , Hss Twist Drill Straight Shank As Per Sl. No. 2.4 Of Annexure I - Ø 6 , Hss Twist Drill Straight Shank As Per Sl. No. 2.5 Of Annexure I - Ø 7 , Hss Twist Drill Straight Shank As Per Sl. No. 2.6 Of Annexure I - Ø 8 , Hss Twist Drill Straight Shank As Per Sl. No. 2.7 Of Annexure I - Ø 9 , Hss Twist Drill Straight Shank As Per Sl. No. 2.8 Of Annexure I - Ø 10 , Hss Twist Drill Straight Shank As Per Sl. No. 2.9 Of Annexure I - Ø 11 , Hss Twist Drill Straight Shank As Per Sl. No. 2.10 Of Annexure I - Ø 12 , Hss Twist Drill Sl. No. 3.1 Of Annexure I - Ø 13 , Hss Twist Drill Sl. No. 3.2 Of Annexure I - Ø 14 , Hss Twist Drill Sl. No. 3.3 Of Annexure I - Ø 15 , Grinding Wheel As Per Sl. No. 4 As Per Annexure I - Ø 100 Mm X 6 Mm X Ø 16 Mm , Electrode As Per Sl. No. 5.1 Of Annexure I - Ø 2.5 Mm, Length= 300 Mm , Electrode As Per Sl. No. 5.2 Of Annexure I - Ø 3.15 Mm, Length= 300 Mm , Half Round File (Rough) With Handle As Per Sl. No. 6 Of Annexure I - 250 Mm , Half Round File (Rough) With Handle As Per Sl. No. 7 Of Annexure I - 150 Mm , Half Round File (Smooth) With Handle As Per Sl. No. 8 Of Annexure I - 250 Mm , Half Round File (Smooth) With Handle As Per Sl. No. 9 Of Annexure I - 150 Mm , Half Round File (Second Cut) With Handle As Per Sl. No. 10Of Annexure I - 250 Mm , Half Round File (Second Cut) With Handle As Per Sl. No. 11 Of Annexure I - 150 Mm , Round File (Bastard Cut) With Handleas Per Sl. No. 12 Of Annexure I - 250 Mm , Round File (Smooth) With Handle As Per Sl. No. 13 Of Annexure I - 250 Mm , Round File (Smooth) With Handle As Per Sl. No. 14 Of Annexure I - 150 Mm , Round File (Second Cut) With Handle As Per Sl. No. 15 Of Annexure I - 250 Mm , Round File (Second Cut) With Handleas Per Sl. No. 16 Of Annexure I - 150 Mm , Square File (Buster) With Handle As Per Sl. No. 17 Of Annexure I - 250 Mm , Square File (Buster) With Handle As Per Sl. No. 18 Of Annexure I - 150 Mm , Square File (Smooth) With Handle As Per Sl. No. 19 Of Annexure I - 250 Mm , Square File (Smooth) With Handle As Per Sl. No. 20 Of Annexure I - 150 Mm , Square File (Secondcut) With Handle As Per Sl. No. 21 Of Annexure I - 250 Mm , Square File (Second Cut) With Handle As Per Sl. No. 22 Of Annexure I - 150 Mm , Flat File (Buster) With Handle As Per Sl. No. 23 Of Annexure I - 250 Mm , Flat File (Buster) With Handle As Per Sl. No. 24 Of Annexure I - 150 Mm , Flat File (Smooth) With Handle As Per Sl. No. 25 Of Annexure I - 250 Mm , Flat File (Smooth) With Handle As Per Sl. No. 26 Of Annexure I - 150 Mm , Flat File (Second Cut) With Handle As Per Sl. No. 27 Of Annexure I - 250 Mm , Flat File (Second Cut) With Handle As Per Sl. No. 28 Of Annexure I - 150 Mm , Triangular File (Buster) With Handle As Per Sl. No. 29 Of Annexure I - 250 Mm , Triangular File (Buster) With Handle As Per Sl. No. 30 Of Annexure I - 150 Mm , Triangular File (Smooth) With Handle As Per Sl. No. 31 Of Annexure I - 250 Mm , Triangular File (Smooth) With Handle As Per Sl. No. 32 Of Annexure I - 150 Mm , Triangular File (Second Cut) With Handle As Per Sl. No. 33 Of Annexure I - 250 Mm , Triangular File (Second Cut) With Handle As Per Sl. No. 34 Of Annexure I - 150 Mm , Needle File Set As Per Sl. No. 35 Of Annexure I - 100 Mm , Ball Peen Hammer As Per Sl. No. 36 Of Annexure I - ½ Kg , Ball Peen Hammer As Per Sl. No. 37 Of Annexure I - 1 Kg , Ball Peen Hammeras Per Sl. No. 38 Of Annexure I - 3 Kg , Ball Peen Hammeras Per Sl. No. 39 Of Annexure I - 5 Kg , Claw Hammer As Per Sl. No. 40 Of Annexure I - 1 Kg , Soft Hammeras Per Sl. No. 41 Of Annexure I - ½ Kg , Cross Peen Hammeras Per Sl. No. 42 Of Annexure I - 1 Kg , Adjustable Spanner As Per Sl. No. 43 Of Annexure I - Open Up To 75 Mm , Double Open Ended Spanner As Per Sl. No. 44 Of Annexure I - 6-32 Mm, 6/7 To 30/32 , Ring Spanner As Per Sl. No. 45 Of Annexure I - 6/7 Mm To 30/32 , Swage Block As Per Sl. No. 46 Of Annexure I - 450 X 450 Mm (Cast Iron) , Anvil As Per Sl. No. 47 Of Annexure I - 25 Kg , Allen Key As Per Sl. No. 48 Of Annexure I - Allen Key Wrench (Hexagon) Set 2 Mm To 18 Mm , Allen Key As Per Sl. No. 49 Of Annexure I - 3/32” To 3/8” , Cutting Plier As Per Sl. No. 50 Of Annexure I - 6” , Nose Plier As Per Sl. No. 51 Of Annexure I - 6” , Combination Plier As Per Sl. No. 52 Of Annexure I - 8” , C Clamp As Per Sl. No. 53 Of Annexure I - Clamping Capacity=2” To 8” , Number Punch As Per Sl. No. 54 Of Annexure I - 0-9 , Letter Punch As Per Sl. No. 55 Of Annexure I - A-Z (Capital) , Cold Chisel As Per Sl. No. 56 Of Annexure I - Length-125 Mm, Cutting Edge- 10 Mm , Tongs As Per Sl. No. 57.1 Of Annexure I - Length= 250Mm , Tongsas Per Sl. No. 57.2 Of Annexure I - Length= 300 Mm , Scriber As Per Sl. No. 58 Of Annexure I - Length= 200 Mm , Ø 6 Mm , Centre Punch As Per Sl. No. 59 Of Annexure I - 6 Inches And Ø 10 Mm , Screw Driver As Per Sl. No. 60 Of Annexure I - Size Length- 200 Mm , Steel Rule As Per Sl. No. 61 Of Annexure I - 300 Mm, Both Metric & British Graduation System , Try Square As Per Sl. No. 62 Of Annexure I - Blade Length 250 Mm,Tongue Length-120 Mm , Angle Protector As Per Sl. No. 63 Of Annexure I - 200 Mm , Hacksaw Frame Adjustable As Per Sl. No. 64 Of Annexure I - 250 To 300 Mm , Hss Hacksaw Blade As Per Sl. No. 65 Of Annexure I - 300 X 12.5 X 0.63 Mm , Welding Helmet As Per Sl. No. 66 Of Annexure I - Auto Dark Made Of Abs Plastic Auto Darkening (Multipurpose) , Welding Helmet (Head Shield) As Per Sl. No. 67 Of Annexure I - Full Face With Black & White Glass , Grinding Helmet As Per Sl. No. 68 Of Annexure I - Clear Glass , Safety Helmet As Per Sl. No. 69 Of Annexure I - Brown , Safety Helmet As Per Sl. No. 70 Of Annexure I - White , Magnifying Glass As Per Sl. No. 71 Of Annexure I - 5 X Magnification Ø 70 Mm , Respirator As Per Sl. No. 72 Of Annexure I - Half Mask, Air Purifying, Respiration, Air Mount , Leather Apron As Per Sl. No. 73 Of Annexure I - Material- Leather 100%, Length-Std. , Protective White Googles For Grinding As Per Sl. No. 74 Of Annexure I - Impact Resistant Duralite Polycarbonate Construction. Regular Size: Fits Over Most Prescription Eye Glass Frames. , Hand Shield As Per Sl. No. 75 Of Annexure I - Welding Purpose With Black & White Glass , Measuring Tape As Per Sl. No. 76.1 Of Annexure I - 5 Meter , Measuring Tape As Per Sl. No. 76.2 Of Annexure I - 15 Meter , Neon Tester As Per Sl. No. 77 Of Annexure I - 500 Volt , Tong Tester As Per Sl. No. 78 Of Annexure I - Up To 200 Amps , Multimeter As Per Sl. No. 79 Of Annexure I - Up To 600 Volt , Welding Gauge As Per Sl. No. 80 Of Annexure I - Standard , Vernier Caliper As Per Sl. No. 81 Of Annexure I - 150 Mm , Inside Caliper As Per Sl. No. 82 Of Annexure I - 150 Mm , Outside Caliper As Per Sl. No. 83 Of Annexure I - 150 Mm , Hose Pipe For Oxy-Acetylene Gas Welding As Per Sl. No. 84.1 Of Annexure I - Maroon , Hose Pipe For Oxy-Acetylene Gas Welding As Per Sl. No. 84.2 Of Annexure I - Blue , Hose Clamp As Per Sl. No. 85 Of Annexure I - Suitable To Above Hose Pipe For Oxy-Acetylene Gas Welding , Non Consumable Filler Rod As Per Sl. No. 86 Of Annexure I - Tungsten Ø2.4 M, Colour Code: Red , Fire Extinguisher As Per Sl. No. 87 Of Annexure I - Abc Type , Fire Extinguisher As Per Sl. No. 88 Of Annexure I - Co2 , Fire Extinguisher As Per Sl. No. 89 Of Annexure I - Mechanical Form , Pipe Vice As Per Sl. No. 90 Of Annexure I - 100 Mm , Wire Gauge As Per Sl. No. 91 Of Annexure I - Swg , ‘V’ Block As Per Sl. No. 92 Of Annexure I - Size- Square 2.2 Inch , Gas Welding Torch With Nozzle As Per Sl. No. 93.1 Of Annexure I - Ooo , Gas Welding Torch With Nozzle As Per Sl. No. 93.2 Of Annexure I - Oo , Gas Welding Torch With Nozzle As Per Sl. No. 93.3 Of Annexure I - O , Gas Welding Torch With Nozzle As Per Sl. No. 93.4 Of Annexure I - 1 , Gas Welding Torch With Nozzle As Per Sl. No. 93.5 Of Annexure I - 2 , Gas Welding Torch With Nozzle As Per Sl. No. 93.6 Of Annexure I - 3 , Gas Welding Torch With Nozzle As Per Sl. No. 93.7 Of Annexure I - 4 , Gas Welding Torch With Nozzle As Per Sl. No. 93.8 Of Annexure I - 5 , Gas Welding Torch With Nozzle As Per Sl. No. 93.9 Of Annexure I - 6 , Gas Welding Torch With Nozzle As Per Sl. No. 93.10 Of Annexure I - 7 , Welding Gas Lighter As Per Sl. No. 94 Of Annexure I - Standard , Hand Angle Grinder Wheel As Per Sl. No. 95 Of Annexure I - Ø 100 X 6 X 16 Mm , Hand Angle Grinder Wheel As Per Sl. No. 96 Of Annexure I - Ø 180 X 606 X 22.23 Mm , Hand Angle Grinder Cutting Wheel As Per Sl. No. 97 Of Annexure I - Ø 105 X 102 X 16 Mm , Pipe Cutting Machine Wheel As Per Sl. No. 98 Of Annexure I - Ø 355 X 2.8 X 25.4 Mm , Hammer Type Drill Bit As Per Sl. No. 99.1 Of Annexure I - 5 Mm , Hammer Type Drill Bit As Per Sl. No. 99.2 Of Annexure I - 15 Mm , Leather Welding Jacket As Per Sl. No. 100 Of Annexure I - Common Size (42/44) , Safety Hand Gloves As Per Sl. No. 101 Of Annexure I - Leather , Leather Spats As Per Sl. No. 102 Of Annexure I - Length- Std. , Leather Hood As Per Sl. No. 103 Of Annexure I - Material- Leather 100 % , Wire Brush As Per Sl. No. 104 Of Annexure I - 6” To 10” , Welding Glass As Per Sl. No. 105 Of Annexure I - Dark , Safety Goggles As Per Sl. No. 106 Of Annexure I - White , Leather Arm Sleeve As Per Sl. No. 107 Of Annexure I - Material- Leather 100% , Ccms Filler Rod As Per Sl. No. 108 Of Annexure I - Ø 2.4 Mm , Oxy-Acetylene Gas Cutting Nozzle As Per Sl. No. 109.1 Of Annexure I - 1/32 , Oxy-Acetylene Gas Cutting Nozzleas Per Sl. No. 109.2 Of Annexure I - 3/64’’ , Oxy-Acetylene Gas Cutting Nozzle As Per Sl. No. 109.3 Of Annexure I - 1/16’’ , Oxy-Acetylene Gas Cutting Nozzle As Per Sl. No. 109.4 Of Annexure I - 5/64’’ , Oxy-Acetylene Gas Cutting Nozzle As Per Sl. No. 109.5 Of Annexure I - 3/32’’ , Oxy-Acetylene Gas Cutting Nozzle As Per Sl. No. 109.6 Of Annexure I - 7/94’’ , Oxy-Acetylene Gas Cutting Nozzle As Per Sl. No. 109.7 Of Annexure I - 1/8’’ , Oxy- Acetylene Gas Cutting Torch As Per Sl. No. 110 Of Annexure I - Suitable For Above Oxy-Acetylene Gas Cutting Nozzle , Flow Meter For Argon As Per Sl. No. 111 Of Annexure I - 20 Bar , Flow Meter For Co2 As Per Sl. No. 112 Of Annexure I - 21 Bar , Hose Clamp For 3/4 As Per Sl. No. 113 Of Annexure I - Standard , Torch Tip Cleaner As Per Sl. No. 114 Of Annexure I - Standard , Double Stage Regulator For Acetylene As Per Sl. No. 115 Of Annexure I - Standard , Double Stage Regulator For Argon As Per Sl. No. 116 Of Annexure I - Standard , Double Stage Regulator For Oxygen As Per Sl. No. 117 Of Annexure I - Standard , Double Stage Regulator & Heater For Co2 As Per Sl. No. 118 Of Annexure I - Standard , Argon Gas Cylinder As Per Sl. No. 119 Of Annexure I - 7 Cum , Oxygen Gas Cylinder As Per Sl. No. 120 Of Annexure I - 7 Cum , Acetylene Gas Cylinder As Per Sl. No. 121 Of Annexure I - 4.7 Cum , Co2 Gas Cylinder As Per Sl. No. 122 Of Annexure I - 31 Kg , Insulation Tape As Per Sl. No. 123 Of Annexure I - Standard , Ear Plug As Per Sl. No. 124 Of Annexure I - Standard , Chipping Hammer Per As Sl. No. 125 Of Annexure I - 100 Gram Total Quantity : 1
Basic Detail
Tender No GEM/2021/B/1675572
Bidding Type Tender
Location
City
State Assam
Key Dates
Publish Date 15 Nov 2021
Submission Date 06 Dec 2021
Open Date 06 Dec 2021
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
2849153_Boq_3.xlsx
39c8c68b-32f7-48a9-9814-e99c9d18403f.pdf
AI-generated summary — verify details from the official tender portal before submission.

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 15, 2021
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 06, 2021
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Dec 06, 2021

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
xlsx

2849153_Boq_3.xlsx

pdf

39c8c68b-32f7-48a9-9814-e99c9d18403f.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders