Military Engineer Services-MES has published Repair Of Flooring , Sanitary Fittings , Joinery To Mes Installation And Single Jco / Or Living Accn Under Age ( I ) ( U ) Br Delhi Cantt-10 Repair Of Flooring , Sanitary Fittings , Joinery To Mes Installation And Single Jco / Or Li. Submission Date for this Tender is 06-12-2021. Civil Work Tenders in AGE (I) (U) B/R Delhi Cantt Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level ,complete all as specified . |
| 2 | Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water,complete all as specified . |
| 3 | M&L for providing 25mm thick cement concrete (1:2:4) type B1 using 20mm gradedstone aggregate as in floors finished the surfaces even and rough to receive to topping layers ,complete all as specified . |
| 4 | Material and labour for screed bed or bedding layers of 15 mm thick cement mortar (1:4) for laying floor finishes all as specified. |
| 5 | Material and labour for rendering 10 mm thick cement mortar (1:4) to receive tiles in vertical surfaces all as specified . |
| 6 | M&L Non-skid colour ceramic tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exc 0.11 sqm but not exc 0.18 sqm / (450x 450)mm, as in floors set and jointed in cement slurry @ 3 Kg/Sqm and pointed in white or colour cement to match existing surfaces complete all as specified . |
| 7 | M&L Non-skid colour ceramic tiles 7 to 8 mm thick ( square/rectangular) area of each tiles exc 0.18 sqm but not exc 0.38 sqm / (600x 600)mm, as in floors set and jointed in cement slurry @ 3 Kg/Sqm and pointed in white or colour cement to match existing surfaces complete all as specified . |
| 8 | M & L glazed ceramic coloured tiles Size 450x300x7mm thick as in verticalsurfaces such as skirting/dado etc set & jointed in neat cement slurry & pointed in white or coloured cement to match, complete all as specified . |
| 9 | Taking down chowkhats orframe with shutters (without taking off shutters from frame)each not exceeding1.50 Sqm each, complete all as specified . |
| 10 | Taking down chowkhats orframe with shutters(without taking off shutters from frame)each exceeding 1.50 Sqmbut not exceeding 4 Sqm each, complete all as specified . |
| 11 | S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge. |
| 12 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails.M.S frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing in SSR, complete all as specified and directed by the Engineer-in-Charge. |
| 13 | All as described in Srl Item No 12 above or ( SSR 2020Index No 8080) here in before but wire gauzed i.e. panel will be of wire gauge in lieu of PVC sheet panel. The wire gauge shall be wrapped on an additional square 8 mm MS solid tube. The wire gauge shall be stretched to tighten firmly, complete all as per manufacturer"s instructions or as directed by Engineer-in-Charge. |
| 14 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 15 | Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge |
| 16 | M & L for cement concrete 1:3:6 type C1 (using 20mm graded aggregate) as inhold fast block etc,complete all as specified . |
| 17 | M & L for mild steel small items such as hold fast strips for rain water pipes bend stray support etc. |
| 18 | S&F 100 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as directed. |
| 19 | S&F 125 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as directed. |
| 20 | S&F 150 mm long,aluminium,anodised, barrel tower bolts of extruded section ,complete all as specified . |
| 21 | S&F 200 mm long,aluminium,anodised, barrel tower bolts of extruded section ,complete all as specified . |
| 22 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing boltsand sliding bolts of extruded sections or cast aluminium alloy all as directed. |
| 23 | S&F 150mm size aluminium handles,cast type,anodised ,complete all as specified and directed. |
| 24 | S&F 125 mm size aluminium handles,cast type,anodised ,complete all as specified and directed. |
| 25 | S&F 140mm overall length of cover plate Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete. |
| 26 | M&L forMaking good under cills , jams or over arches, lintels and bressummers. including all pinning when necessary with Cement Mortor 1:4all as spd . |
| 27 | M&L for aluminium alloy anodised powder coated window / ventiletor frame with two glazed / gauged shutters sliding type made of size 80 x 44 mm of sheet thickness 1.50 mm, frame ( Chowkat ) of window shall be 100mmx44mmx1.5mm thick section with or without rebate with aluminium grill ( Weight of grill not less than 2.25 Kg/Sqm ) with 5.5mm thick tinted plain glass fixed with aluminium beads, locking arrangement and aluminium handle as required, 100mm long - 3 Nos, aluminium anodised tower bolt 100mm long 2 Nos, hook and eye cleats and stopper with each shutter as directed by the Engr in Charge. Note : 1.All window fittings except cleats shall be ISI marked. 2.Sizes of each window shall be as per site requirement. |
| 28 | S&F Power Coated Aluminium anodised frame/chowkhat made of size 100 x 44 mm of sheet thickness 1.50 mm with one or more rebate including jointing cleats hinges etc for fixing anodised aluiminium door shutter fully panelled (Two Nos of panel on each shutter) with 5.5 mm thick tinted plain glass fixed Top and middle rail and 18/19mm thick prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination fixed with middle and bottamshutter rails made of 80x45mm of sheet thickness 1.50mm (Top, bottom, middle and side rail) single/double leaf, side hung type including necessary jointing cleats, anodised aluminium fillets/Aluminium glazing clip with rubber gasket with aluminium fitting such as aluminium butt hinges 100mm long-4 Nos on each shutter, aluminium anodised tower bolt 200mm long 3 Nos for each door, aluminium anodised handle 150mm 2 Nos "D" type for each shutter & locking 6 lever Make : Harrison one each door, floor door stopper( aluminium alloy body and double tongue anodised hard drawn steel springs 150 mm long ) spring one on each shutter.All door fitting except cleats shall be ISI marked (sizes of each door shall be as per site requirement). |
| 29 | Hacking out old broken glass (any thickness, quality or description) from wooden frame or stone concrete or brick surrounds, glazed with putty or fixed with beads . |
| 30 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in Squares not exceeding 0.50 square metre in each pane, complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F, in repairs, Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples , complete all as specified and directed by the Engineer-in-Charge. |
| 32 | Dismantling of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed by the Engineer-in-Charge. |
| 33 | S&F Anodised aluminium snap grid frame work (size of frame work 605 X 605 mm ) for false ceiling, including GI Hangers 6mm dia (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long, complete all as specified & directed by the Engineer-in-Charge. |
| 34 | S&F 10 mm thick PVC insulation panels with EPS stuck to 1mm Printed PVC sheet suitably placed in false ceiling grid made of Aluminium all as specified. |
| 35 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain colourPVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and directed by the Engineer-in-Charge. |
| 36 | S&F Venetian Blinds of superior quality fabric (as approved by the AGE (I)), horizontal/vertical type, with 100mm wide louvers, including supplying and fixing of all arrangements required for proper functioning of the blinds such as aluminium top & bottom guide rails, rollers, chainetc., of make (Vista / Levalor); including taking down of old unserviceable venetian blinds, complete all as specified and as directed by the Engineer-in-Charge. |
| 37 | Taking up or down water tubing 15 mm bore from trenches/wall, ceiling or floors including all fittings, segregated and stacking the pipe complete . |
| 38 | Taking up or down water tubing 20 mm bore from trenches/wall, ceiling or floors including all fittings, segregated and stacking the pipe complete ,all as specified . |
| 39 | Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors. all as specified . |
| 40 | Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors. all as specified . |
| 41 | Refixing old steel tubing and connections, 15mm bore of pipe, in new or old position (Walls, ceiling,floors etc.),complete all as specified and directed by Engineer-in-Charge. |
| 42 | Refixing old steel tubing and connections, 20 mm bore of pipe, in new or old position (Walls, ceiling,floors etc.),complete all as specified and directed by Engineer-in-Charge. |
| 43 | Supply and fix,as in repairs,vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor all as specified . |
| 44 | S&F, in repairs, vitreous china Wash hand basin, coloured, superior quality, flat back, size 580 x 450 mm, with and including vitreous china matching pedestal and brackets, including cutting for & pinning in ends of brackets or erecting stand including brass CP waste coupling, waste pipe etc., complete all as specified and as directed by the Engineer-in-Charge. |
| 45 | S&F, as in repair, 10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white with inlet, ball valve float and handle including brackets complete. |
| 46 | S&F, in repairs, pillar tap, for 15mm bore dia of pipe, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold", with long screwed shanks & fly nuts, screwed for iron pipe & fixed, complete all as specified & directed by the Engineer-in-Charge. |
| 47 | S&F, in repairs, 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, up to4th floor,complete all as specified and directed by the Engineer-in-Charge. |
| 48 | S&F, in repairs,Stop valves, for 15mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union & fixed,complete all as specified & directed by the Engineer-in-Charge. |
| 49 | S&F, in repairs,Stop valves, for 20mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union & fixed,complete all as specified & directed by the Engineer-in-Charge. |
| 50 | S&F in repaire PVC connections 15mm dia size with PTMT nuts of length 450mm ,all as specified & directed |
| 51 | S&Fin repairs CP gratings of size 125 mm dia ,all as specified & directed |
| 52 | S&F asin repair600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fxed to wooden plugs with chromium plated brass screw and cup washer etc,complete all as specified & directed by the Engineer-in-Charge. |
| 53 | S&F asin repairs, 32 mm dia waste fittings,brass,chromium plated for glazed waresinks, basins,etc with long screwed shanks and fly-nuts, flange end bedded in red lead, cement and other end fixed all as specified . |
| 54 | M&L Aluminium partition wall frame made out of section of size 80x40mm of sheet thickness 1.5 mm with or without rebate with 5.5mm thick tinted glass fixed type with aluminium beads, rubber gasket complete fixing as directed by the Engr in Charge. Note : The size of panel of partion wall shall be as per the site requirement |
| 55 | M&L for Marble work 18 to 20mm thick (table rubbed and polished) of colour/shade/texture as approved by the AGE (I), in vertical surfaces, steps, Jambs, pillars, window cills, cooking platform and like, laid over and including 15mm thick rendering in cement mortar 1:4, including pointing in white cement using marble dust (1:2) with admixture of pigment to match with marble shade to match with existing type and pattern, including demolition of existing marble/stone work including bedding but not backing, complete all as specified & directed by the Engineer-in-Charge. |
| 56 | M&L for roughcast plaster finish using cement, sand and fine gravel in the ratioof 1:1:1, over and including under coat of 10mm thick rendering in cement mortar 1:4 on bricks or concrete surfaces, and finished even, complete all as specified and directed by Engineer-in-Charge. |
| 57 | M&L for brickworkin cement mortar 1:6 with subclass "B"bricks (old size) straight or curved on plan exc. 6m mean radius, complete all as specified and directed by Engineer-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
