|
| 1 | Earth work in slushy soil (in water up too 0.6 M depth requiring the aid of pans and vessels) within 50 M initial lead and 1.5 M initial lift as per the direction and specification of the Department. |
| 2 | Extra one lift over Initial Lift |
| 3 | Dismantling and removing RCC columns, beams slab staircase, landing, lintels including stacking the useful materials for reuse and removing the debreis within 50 M lead. |
| 4 | Supplying, fitting, fixing and Laying in trenches M.S Slotted Medium Class (ISI Marked) Pipes of 323.9mm Outer Dia. of thickness 7.10mm conforming to IS : 3589-2001 & IS : 3601-2006 andas per specification complete. The pipes andfitting shall be painted with two coats of anticorrosive paint over a coat of primer. (earth work in excavation in trenchesjointing of pipes& specials to be measuredseparately)(300mm Dia Pipe) |
| 5 | 300mm dia End cap with GI Short Piece |
| 6 | Hire charges for dewatering for laying of gallery line (Pump with 5HP diesel engine) |
| 7 | Rigid & smooth centering & shuttering for RCC work including false works and dismantling them after casting including cost of materials complete in ground floor. (RCC foundation, plinth band and footing bases of columns mass concrete pre-cast slab etc.) |
| 8 | Collecting, Supplying, stacking & spreading of 40mm to 12mm size oval shaped river pebbles, screened, washed, cleaned and graded free from clay & other impurites, packed in HDPE/Polythene bag inculding stiching, loading & Unloading including transporation complete and as per direction of Engineer-in-charge. |
| 9 | Filling in foundation & plinth with coarse sand watered and ramed |
| 10 | Filling foundation and plinth with excavated Earth inluding watering and ramming |
| 11 | Cost of 300mm. dia. DI K7 pipe(IS-8329:2000) (ISI Marked) |
| 12 | Earth work in stoney earth & gravels mixed with stone and boulder not exceeding 0.014 Cum in volume within 50 M initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm. To 7cm and laying in layers not exceding 0.3 M in depth and as per specification approved by the department. |
| 13 | Extra one lift over Initial Lift |
| 14 | Extra two lift over Initial Lift 300mm Dia. K7 Pipes |
| 15 | Supplying of all labour & T&P materials for laying in trenches DI K7 pipes confirming to I.S. 8329:2000 of following nominal diameter as per specification complete300mm Dia. K7 Pipes |
| 16 | Fillingin foundation and plinth with sand wateredand rammed including cost of all labour ,transportation ,T & P etc all complete |
| 17 | Filling foundation and plinth with excavated Earth inluding watering and ramming |
| 18 | Hire charges for dewatering for laying of gallery line (Pump with 5HP diesel engine) |
| 19 | Providing & Fixing of Puddle collarwith double flanged ends for water works purpose for the following nominal dia. includingcost of nuts & bolts, rubber insertation inculding cost of Puddle collaras per specification complete. 300mm dia Puddle collar |
| 20 | Supply, fitting and fixing 300mm D.I. flanged socket tail piece |
| 21 | Supply, fitting and fixing of 300mm D.I. flanged spigot tail piece |
| 22 | Supply, fitting and fixing of 300mm D.I. double socket 90\" bend |
| 23 | Providing & Fixing of Sluice Valve Rating PN-1.6 (IS:14846-2000) (Standard) with double flanged ends for water works purpose for the following rating & nominal dia. includingcost of nuts & bolts, rubber insertation inculding cost of sluice valveas per specification complete. (300mmdia C.I. S.V.) |
| 24 | 250mmdia C.I. S.V |
| 25 | 300 mm dia 16 mm thick MS flange/Blank Flange |
| 26 | 250 mm dia 12 mm thick MS flange/Blank Flange |
| 27 | Supplying all labour T&P, providing Flanged Joints conforming to IS : 3114-1994 to flanged cast iron pipes and fittings of the following nominal diameter inculding testing of joints, cost of bolts and nuts and rubber insertations as per specifications complete 300mm Dia. MS Flange |
| 28 | 250mm Dia. MS Flange |
| 29 | Supplying, fabricating, Fitting, Fixing of 300mm and 250 mm dia. MS jally at outer end of pipes and as per the direction of engineer in-charge in complete manner |
| 30 | Earth work in stoney earth & gravels mixed with stone and boulder not exceeding 0.014 Cum in volume within 50 M initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm. To 7cm and laying in layers not exceding 0.3 M in depth and as per specification approved by the department. |
| 31 | Extra one lift over Initial Lift |
| 32 | Extra two lift over Initial Lift |
| 33 | Supply of all labour,T&P and materials for sand filling in F&P well watered and rammed including cost, conveyance ,royality all taxes etc complete as per direction of Engineer-in-charge. |
| 34 | Cement concrete (1:3:6) with 4cm size crusher broken hard granite metal including cost, conveyance, royality all taxes etc complete as per direction of Engineer-in-charge. |
| 35 | Brick work with Fly ash. bricks having crushing strength not less than 75kg/cm2 in cement mortar (1:4) in foundation and plinth including cost, conveyance, royality all taxes etc complete as per direction of Engineer-in-charge.. |
| 36 | Supply of all labour,T&Pand materials for C.C(1:2:4) using 12mm size CBHG chips including cost, conveyance, royality all taxes etc complete as per direction of Engineer-in-charge. |
| 37 | 12mm. thick cement plaster in cement mortar (1:4) for brick work including cost,conveyance,royality all taxes etc complete as per direction of Engineer-in-charge. |
| 38 | Cement concrete (1:1.5:3) for R.C.C. works with 12mm size hard granite chips including hoisting and laying with centering and shuttering etc all complete but excluding cost of M.S rod binding Wire etc all complete.. |
| 39 | M.S. Reinforcement for R.C.C. works including cutting,bending, binding and tying grills and placing in position including cost of M.S.Rods,binding wire 18 to 20 gauge. |
| 40 | Supplying all material, labour T&P for Earth work excavation in all kind of soilwithin 5 mtr. initial lead, 1.5 mtr. initial lift including rough dressing and breaking clod to maxium 5 cum to 7 cum & laying in layer not excluding 0.3 mtr. depth etc. all completeas per direction of Engineer incharge. |
| 41 | Supplying all materials, labour, T&P for filling sand in foundation & plinth including cost, carriage, royalty, taxes of all materials to work site etc.all completeas per direction of Engineer incharge. |
| 42 | Supplying all materials, labour T&P for cement concrete in cement motor (1:3:6) with 40mm size HGCB metal including cost, royalty,carriage, taxes of all materials to the work site etc. all complete as per direction of Engineer incharge. |
| 43 | Supplying all materials, labour,T&P for providing brick masonary work with Fly Ash Brick of size (23 x 11 x 8)cm having crushing strength not less than 75kg/cm2 in cement moter(1:4) in foundation plinth including cost, carriage, conveyence, royalty, taxes of all materials to work site etc.all complete as per direction of Engineer incharge. |
| 44 | Supplying all labour T&P and providing R.C.C work in C.C (1:1½:3) using 12mm size H.G.C.B chipsincluding hoisting and laying the concrete with cost, conveyance royalty and taxes of all materialsto work siteetc all complete. |
| 45 | Supplying all materials, labour, T&Pfor providingbrick masonary work with Fly Ash Brick of size (23x11x8)cm having crushing strength not less than 75kg/cm2 in cement moter (1:6) in Super Structure including cost, conveyence, royalty, taxes of all materials to work site etc.all complete as perdirection of Engineer incharge . |
| 46 | Supplying all labour T&P and cutting, binding and tying the grills and placing in position including cost of labour and M.S. rod with binding wire of 18 to 20 gauge etc all complete. |
| 47 | Supplying all materials, labour T&P for Rigd. Smooth centring shuttring for RCC work with false work and dismentling after casting including cost, carriage, taxes of all materials to site etc. all complete as per direction of Er. In-charge. |
| 48 | Supplying all materials, labour T&P for 16mm thick cement plaster in C.M (1:6) over brick or stone masonry work including cost, carriage, royalry, taxes of all materials to work site etc. all complete as per direction of Engineer in-charge. Sides = |
| 49 | Supplying, fitting & fixing of Stainless Steel Gate of 4.00 Nos x 5.00m x 2.00m @ (25Kg/Sqm) as per specification including cost of all materials, fabrication, conveyance & labour cess etc. all complete as per specification and direction of Engineer-in-charge. |
| 50 | Supplying all materials, labour T&P for Wall painting Two coats with weather coat paint of approved shade on new work including cost, carriage, taxes of all materials and all painting accessories to work site etc. all complete as per direction of Engineer in-charge. |
| 51 | Priming one coat with any approved primer (For Plaster surface) |
| 52 | Supplying all labour, T&P for re-filling the excavated materialsincluding levelling, watering etc. all complete as per as per direction of Engineer incharge. |
| 53 | Supplying all materials,labour,T&P for cutting the hole of 3.0Mtr. spacingover the compound wall of size 0.25X0.25X0.45 Mtr. and fixing theMS Y angle (50x50x6)mm of 0.45Mtr. height by cement concrete (1:2:4) with 12mm. size CBHG chips and CP (1:6) over the cutting portion including fixing of the 0.60mm dia concertina coil with clip etc all complete and as per direction of Engineer-in-charge. |
| 54 | Supplying all materials,labour,T&P fixing of the 0.60mm dia concertina coil overMS Y angle with clip etc all complete and as per direction of Engineer-in-charge. |
| 55 | Supplying, fitting, and fixing of 16sqmm Flat Three Core PVC Insulated & PVC Sheathed Industrial copper Cable for Submersible Pump Motors Make : Havells/Finolex/RR Cable |
