Supply Of Supply Of (I/A) Flexible Permanent Magnetic Yoke For Magnetic Particle Testing Part No.: Weight Of The Yoke Shall Not Be More Than 700 Gms And Should Be Flexible . Lifting Capacity Shall Be 25 Kgs At 100 Mm. Pole Spacing Shall Be Capable Of Tes-Maharashtra

Supply Of Supply Of (I/A) Flexible Permanent Magnetic Yoke For Magnetic Particle Testing Part No.: Weight Of The Yoke Shall Not Be More Than 700 Gms And Should Be Flexible . Lifting Capacity Shall Be 25 Kgs At 100 Mm. Pole Spacing Shall Be Capable Of Testing With Dry Powder Or Wet Powder For Track Machines, Qty 03 Nos, (I/B) Magnetic Ink Paste Black Colour For Magnetic Particle Testing Part No.: Oil Based For Crack Detection By Mpi Method ,As Per Is-6410/1971 Packing :1 Kg Container For Track Machines. Part Make: Ocwpl/Kolkata Or Equivalent,Qty 10 Kg., (Ii) U Clamp With Square Nut ,Lock Striple Plate,Spring Washer And Plain Washer Part No.: U Clamp As Per Drawing Attached Required For Replace On Bcm,Frm,Machines. , Qty 1000 Sets.,(Iii/A) Pneumatic Cylinder Part No.: Plasser Part No.: Pn2z-G.35/12/100 Duncan Part No. Nscc8267 Required For Replace On Duo , D T/Exp,T/Exp Machines. Part Make: Plasser/Duncan/Schrader, Qty. 12 Nos., (Iii/B) Pneumatic Cylinder Part No.: Plasser Part No.: Pn1z-Ml.50/12/63 Sub.90233 Duncan Part No. Nscc7670 Required For Replace On Csm ,Dts,Duo, T/Exp,Uni Machines. Part Make: Plasser/Duncan/Schrader, Qty. 10 Nos., (Iii/C) Pneumatic Cylinder Part No.: Plasser Part No. Pn2z.G.70/20/500 Required For Replace On Uni 3S Machines. Part Make: Plasser/Duncan/Schrader, Qty. 02 Nos,(Iv) Alternator With Single Pulley Part No.: Bosch Part No. 0120469643 28 Volt 55 Amps Plasser Part No. 0120469643 Required For Replace On Csm,Dts,Duo,T/Exp Uni,Machines,Part Make: Plasser/Bosch, Qty. 09 Nos.Supply Of (I/A) Flexible Permanent Magnetic Yoke For Magnetic Particle Testing Part No.: Weight Of The Yoke Shall Not Be More Than 700 Gms And Should Be Flexible . Lifting Capacity Shall Be 25 Kgs At 100 Mm. Pole Spacing Shall Be Capable Of Testing With Dry Powder Or Wet Powder For Track Machines, Qty 03 Nos, (I/B) Magnetic Ink Paste Black Colour For Magnetic Particle Testing Part No.: Oil Based For Crack Detection By Mpi Method ,As Per Is-6410/1971 Packing :1 Kg Co

Refer document

Refer document

Refer document